离子色谱法同时测定叶菜中的硝酸盐和亚硝酸盐

采用抑制型离子色谱法同时测定叶菜中的硝酸盐和亚硝酸盐的含量。色谱柱为Ionpac AS11柱，流动相为21mmol/L NaOH溶液，检测器为电导检测器（CD），流动相流速为1.0mL/min。该方法简便、快捷，准确度和灵敏度高，NO2^-和NO3^-的回收率分别为97％－105％和95％－104％，相对标准偏差RSD＜5．0％。同时考察了样品浸提时间对结果的影响。     

离子色谱法测定水果中亚硝酸盐和硝酸盐

建立了离子色谱法测定水果中亚硝酸盐和硝酸盐的方法.试样溶液中亚硝酸盐和硝酸盐在YSA-8阴离子色谱柱分离,以4 mmol.L-1碳酸钠-3 mmol.L-1碳酸氢钠为流动相,电导检测.亚硝酸盐和硝酸盐的检出限分别为0.02 mg·L-1和0.11 mg·L-1,工作曲线的线性范围分别在0.2～20.0 mg·L-1和0.3～30.0 mg·L-1范围内.该方法已应用于水果中亚硝酸盐和硝酸盐的测定,测得回收率在93.4%～105.2%之间.     

一阶导数分光光度法直接测定肉制品中硝酸盐及亚硝酸盐的含量

本文研究了硝酸盐及亚硝酸盐的一阶导数光谱，选择亚硝酸盐的一阶导数光谱与基线相交点２０７ｎｍ，作为硝酸盐的测定波长；选择硝酸盐在２０７ｎｍ、２２０ｎｍ处导数值相等，作为双波长法测定亚硝酸盐的测定波长。结果表明，硝酸盐及亚硝酸盐在１～１５μｇ／ｍＬ浓度范围内线性关系良好，合成样分析，加标回收试验，样品测定同标准比色法对照均获得满意结果。     

膜渗透与离子色谱联用技术测定蔬菜中亚硝酸盐和硝酸盐

建立了膜渗析与离子色谱联用技术分析蔬菜等复杂基体中亚硝酸盐和硝酸盐的方法。蔬菜样品经沸水浴后,试样液通过膜渗析除去水溶性大分子杂质和颗粒,直接进入离子色谱分析。渗析池采用0.20μm的醋酸纤维为渗析膜,以水为接收液,分析柱为Metrosep A Supp4-250阴离子交换柱,以1.8mmol/L Na2CO3 1.7mmol/L NaHCO3为流动相,采用化学抑制电导检测。以20g称样计量,方法中NO2-、NO3-的检出限分别为0.075mg/kg和0.105mg/kg;实际样品的加标回收率分别为80.6%~98.7%和90.5%~114%;相对标准偏差(RSD)≤10%。本方法前处理简单,重现性好,准确度高。     

乙二胺合钴溶液中亚硝酸盐和硝酸盐氮的测定

建立了快速测定乙二胺合钴溶液中亚硝酸和硝酸盐的方法。使用麝香草酚法测定硝酸盐,使用改进了的GB 13580.7-92测定亚硝酸盐。硝酸盐的线性范围在8 mg·L-1以内,亚硝酸盐的线性范围为0.03~0.8 mg·L-1,相关系数分别为0.999 9,0.999 4。硝酸盐的加标回收率在99.9%~108%之间,测定值的相对标准偏差(n=7)为1.2%;亚硝酸盐的加标回收率在99.5%~107%之间,测定值的相对标准偏差(n=7)为1.4%。     

乳粉中硝酸盐、亚硝酸盐分析标准样品研制

研制乳粉中硝酸盐、亚硝酸盐分析标准样品。获得原料并确认后,对原料添加目标物,混匀,喷雾干燥,分装,包装制成标准样品。对样品进行均匀性、稳定性检验,通过多家实验室联合定值的方式对样品进行定值,从而获得标准值及其不确定度。样品中硝酸盐、亚硝酸盐均匀性检测数据经F检验在95%置信水平时单元件不具有统计显著性,表明样品是均匀的;样品稳定性检测数据经t检验,表明样品在-20℃保存条件下18个月内量值稳定;对8家有能力的实验室联合定值数据统计分析得到样品中硝酸盐标准值为22.4 mg/kg,不确定度为0.95 mg/kg(k=2);亚硝酸盐标准值为23.0 mg/kg,不确定度为0.93 mg/kg(k=2)。样品均匀性、稳定性、赋值和不确定度评估等均符合有证标准样品的要求,能够满足预期用途。     

离子色谱法测定火腿中的硝酸盐和亚硝酸盐

建立了离子色谱分离-电导检测法测定火腿中的亚硝酸盐和硝酸盐的分析方法。样品经粉碎、溶剂沉淀除蛋白和固相萃取净化后,采用优化后的色谱条件测定。结果表明,硝酸盐和亚硝酸盐浓度分别在0.02-0.5mg/L和0.2-5mg/L内具有良好的线性关系,方法回收率92.8-98.2%。该方法检测这两种离子测定简便,稳定,满足火腿中硝酸盐和亚硝酸盐含量的同时测定。     

紫外检测-离子色谱法测定食品中的硝酸盐和亚硝酸盐

利用紫外检测－离子色谱法测定食品中的亚硝酸盐和硝酸盐，NO2－N、NO3^-－N的检出限分别为4和10μg/L；标准曲线方程分别为：A＝43.194c-0.0332(r=0.9998)和A=38.534c-0.3132(r=0.9997)。NO2^-－N和NO3^-－N的回收率分别为89％和92％。该方法适用于测定肉制品、奶粉、蔬菜中的硝酸盐和亚硝酸盐。     

亚硝酸盐和硝酸盐检测方法的研究进展

亚硝酸盐和硝酸盐与人类的生产生活及个体的健康息息相关,人类的生产活动更使得亚硝酸盐和硝酸盐普遍存在于自然环境中,因此对它们进行有效检测显得十分重要。近十几年来,各种先进的检测技术应用于亚硝酸盐和硝酸盐的检测中,发展出了形式多样的检测方法。对各种不同检测方法的分析并对其优点和缺点进行了总结,以便于在实际工作中根据不同的需要选择合适的检测方法,也为今后探索更为有效的检测方法提供实际的指导。     

Determination of nitrite and nitrate in human serum

A simple and effective assay for nitrite and nitrate in human serum has been developed using ion chromatography. Initial experiments using isocratic carbonate-bicarbonate elution with conductivity detection on a Dionex QIC system with an AS4A-SC column showed promise but were unsatisfactory because of co-elution problems with nitrite. Carbonate and chloride were investigated as eluents using a gradient system, and direct UV detection at 214 nm was used in place of conductivity detection. Dionex AS4A, AS9A, AS12, Nucleopac PA-100 and Carbopac PA-100 columns were compared for selectivity and resistance to overload. The final method, using a chloride concentration gradient, pH buffering and direct UV detection with a Carbopac PA-100 column, shows good resolution, does not suffer from chloride overload and is simple to use. The method is being used in an investigation of the role of nitric oxide in pre-eclampsia, a hypertensive disorder during pregnancy.     

Application of capillary zone electrophoresis to the analysis and to a stability study of nitrite and nitrate in saliva

The applicability of capillary zone electrophoresis for the determinations of nitrite and nitrate was studied. Using direct UV detection the limit of detection values of the analytes were 0.14 and 0.21 microg/mL, respectively. The developed method was found to be useful to directly determine nitrite, nitrate and thiocyanate in saliva. It was found that adjusting the pH of the sample to 11 and storing the saliva at 4 degrees C was adequate to make constant the nitrite/nitrate ratio in saliva samples at least 7 days.     

A simple miniaturised photometrical method for rapid determination of nitrate and nitrite in freshwater

A rapid, simple miniaturised photometrical method was developed for the determination of nitrate and/or nitrite in freshwater samples. All procedures, including sample buffering, reduction by copperised cadmium granules, colour development and absorbance determination, were completed in a 96-well microplate. The factors governing the nitrate reduction and its recovery were investigated in detail, and the optimised analysing conditions were established. Nitrate was quantitatively reduced by copperised cadmium granules with a high reduction efficiency (96.59 ± 0.96%). The proposed method gave a linear calibration ranging from 0.01 to 1.50 mg L⁻¹ for NO₂⁻-N and 0.02 to 1.50 mg L⁻¹ for NO₃⁻-N. The detection limits for nitrite and nitrate were 2 and 4 μg L⁻¹, respectively. The proposed method allowed at least 48 samples to be simultaneously analysed in duplicate, with good precision, within 90 min for nitrate and 30 min for nitrite, and was successfully applied to actual freshwater sample analysis with a recovery of 98.02 ± 1.04% for nitrite and 99.72 ± 1.39% for nitrate. This method produced accurate results comparable to standard methods, provided a much higher sample throughput than conventional methods and could be routinely used in actual freshwater sample monitoring.     

毛细管离子电泳法同时测定腌菜中硝酸根和亚硝酸根

以溴离子(Br-)为内标,建立了毛细管离子电泳同时测定腌菜中的硝酸根和亚硝酸根的方法。讨论了缓冲液pH、样品和缓冲液中氯化钠浓度、分离电压对分离的影响。结果表明:以含1mol LNaCl的40mmol LH3PO4 NaOH缓冲-、-得到基线分离。NO3-和NO2液(pH3.5)为背景电解质,4min内Br-、NO3-检出限分别为0.1g L和0.3g L,峰面积相对标准偏差分别为4.6%和NO25 8%。     

Determination of nitrite and nitrate in Venice lagoon water by ion interaction reversed-phase liquid chromatography

Ion interaction reversed-phase liquid chromatography with octylammonium orthophosphate as the interacting reagent and a reversed-phase C₁₈ column was applied to the identification and determination of nitrite and nitrate in Venice lagoon water. Interference by the high chloride concentration was systematically studied and the results obtained with different column packings were compared. With spectrophotometric detection at 230 nm, nitrite at 0.005 mg 1^?1 can be detected and determined even in the presence of 0.70 M chloride. The dependence of the retention time of nitrite on the chloride concentration was studied for two reversed-phase columns with different packings. Concentrations of 0.30 ± 0.05 mg 1^?1 of nitrite and 0.20 ± 0.05 mg 1^?1 of nitrate were found in Venice lagoon water.     

The role of nitric oxide in cancer improved methods for measurement of nitrite and nitrate by high-performance ion chromatography

The short lifetime of nitric oxide (NO) in vivo impedes its quantitation directly; however, the determination of nitrite and nitrate ions as the end-products of NO oxidation has proven a more practical approach. High-performance ion chromatographic analysis of nitrite in biological fluids is hampered by the large amount of chloride ion (up to 100mmol/l) which results in insufficient peak resolution when utilizing conductimetric detection. Analysis of both anions in small sample volumes is also constrained by the need to minimise sample handling to avoid contamination by environmental nitrate. We report a means to remove Cl⁻ ions from small sample volumes using Ag⁺ resin which facilitates quantitation of either nitrite and nitrate anions in biological samples, using silica or polymer based ion-exchange resins with conductimetric or electrochemical and spectrophotometric detection. Including a reversed-phase guard column before the anion-exchange guard and analytical column also greatly extends column lifetime.     

Amperometric detection of nitrite and nitrate at tetraruthenated porphyrin-modified electrodes in a continuous-flow assembly

The modification of a glassy carbon surface by coating with an electrostatically assembled film of tetraruthenated cobalt porphyrin/(meso-tetra(4-sulphonatephenyl)porphyrinate zinc(II) yields an indicator electrode that allows the determination of nitrite to be performed with a limit of detection of 0.1 μM in a flow injection configuration. The dynamic range extends up to 1000 μM and the repeatability of the measurements was evaluated to be 1.5% with a throughput of 50 samples per hour. The efficiency of the bilayered film to mediate the electron transfer allows the determinations to be performed at a less positive potential (+0.75 V) with enhanced sensitivity. The coating also prevents the surface poisoning and its stability is maintained over several weeks. The same detector was used for determination of nitrate after reduction to nitrite in a reductor column containing copperised cadmium. This method was used for the determination of nitrate and nitrite in mineral water, saliva and cured meats, the results being in agreement with certified values and those obtained by using recommended procedures.     

Spectrophotometric simultaneous determination of nitrite, nitrate and ammonium in soils by flow injection analysis

A new rapid flow injection procedure for the simultaneous determination of nitrate, nitrite and ammonium in single flow injection analysis system is proposed. The procedure combines on-line reduction of nitrate to nitrite and oxidation of ammonium to nitrite with spectrophotometric detection of nitrite by using the Griess-llosvay reaction. The formed azo dye was measured at 543 nm. The influence of reagent concentration and manifold parameters were studied. Nitrite, nitrate and ammonium can be determined within the range of 0.02–1.60 μg mL⁻¹, 0.02–1.60 μg mL⁻¹ and 0.05–1.40 μg mL⁻¹, respectively. R.S.D. values (n = 10) were 2.66; 1.41 and 3.58 for nitrate, nitrite and ammonium, respectively. This procedure allows the determination and speciation of inorganic nitrogen species in soils with a single injection in a simple way, and high sampling rate (18 h⁻¹). Detection limits of 0.013, 0.046 and 0.047 μg mL⁻¹were achieved for nitrate, nitrite and ammonium, respectively. In comparison with others methods, the proposed one is more simple, it uses as single chromogenic reagent less injection volume (250 mL in stead of 350 mL) and it has a higher sampling rate.     

Simple flow-injection system for the simultaneous determination of nitrite and nitrate in water samples

A novel spectrophotometric reaction system was developed for the determination of nitrite as well as nitrate in water samples, and was applied to a flow-injection analysis (FIA). The spectrophotometric flow-injection system coupled with a copperised cadmium reductor column was proposed. The detection was based on the nitrosation reaction between nitrite ion and phloroglucinol (1,3,5-trihydroxybenzene), a commercially available phenolic compound. Sample injected into a carrier stream was split into two streams at the Y-shaped connector. One of the streams merged directly and reacted with the reagent stream: nitrite ion in the samples was detected. The other stream was passed through the copperised cadmium reductor column, where the reduction of nitrate to nitrite occurred, and the sample zone was then mixed with the reagent stream and passed through the detector: the sum of nitrate and nitrite was detected. The optimised conditions allow a linear calibration range of 0.03–0.30 μg NO₂⁻-N ml⁻¹ and 0.10–1.00 μg NO₃⁻-N ml⁻¹. The detection limits for nitrite and nitrate, defined as three times the standard deviation of measured blanks are 2.9 ng NO₂⁻-N ml⁻¹ and 2.3 ng NO₃⁻-N ml⁻¹, respectively. Up to 20 samples can be analyzed per hour with a relative standard deviation of less than 1.5%. The proposed method could be applied successfully to the simultaneous determination of nitrite and nitrate in water samples.     

Magnetic hydroxyapatite nanoparticles: An efficient adsorbent for the separation and removal of nitrate and nitrite ions from environmental samples

A novel type of magnetic nanosorbent, hydroxyapatite‐coated Fe₂O₃ nanoparticles was synthesized and used for the adsorption and removal of nitrite and nitrate ions from environmental samples. The properties of synthesized magnetic nanoparticles were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and X‐ray powder diffraction. After the adsorption process, the separation of γ‐Fe₂O₃@hydroxyapatite nanoparticles from the aqueous solution was simply achieved by applying an external magnetic field. The effects of different variables on the adsorption efficiency were studied simultaneously using an experimental design. The variables of interest were amount of magnetic hydroxyapatite nanoparticles, sample volume, pH, stirring rate, adsorption time, and temperature. The experimental parameters were optimized using a Box–Behnken design and response surface methodology after a Plackett–Burman screening design. Under the optimum conditions, the adsorption efficiencies of magnetic hydroxyapatite nanoparticles adsorbents toward NO₃^? and NO₂^? ions (100 mg/L) were in the range of 93–101%. The results revealed that the magnetic hydroxyapatite nanoparticles adsorbent could be used as a simple, efficient, and cost‐effective material for the removal of nitrate and nitrite ions from environmental water and soil samples.