DFT study of CO adsorption on neutral and charged Pd<Subscript>n</Subscript>(n = 1–7) clusters

Density functional calculations have been performed to investigate CO adsorption on neutral, cationic and anionic Pd_n (n=1–7) clusters. From the results, it is observed that the binding of CO molecule to neutral and cationic palladium clusters takes place via 1-, 2- and 3-fold coordination. On the other hand, only terminal adsorption of CO molecule is possible in anionic clusters barring bridging adsorption in Pd₇ ^- cluster.     

DFT studies on the interaction of PtxRuyMz (M = Fe,Ni, Cu,Mo, Sn,x + y + z = 4, x ≥ 1, y ≥ 1) alloy clusters with O2

The reaction mechanism of O₂ dissociation on Pt_xRu_yM_z (M = Fe, Ni, Cu, Mo, Sn, x + y + z = 4, x ≥ 1, y ≥ 1) alloy catalysts have been investigated with density functional theory calculations in this work. For bare alloy clusters, bimetallic clusters are more stable than the ternary alloy clusters. The geometries of the Pt_xRu_yM_z–O₂ system, O–O bond stretching frequency and electronic-structure details have been investigated. The energies of O₂ adsorption on PtRu clusters are slightly higher than those on Pt_xRu_yM_z clusters, and the more charge transfer to O₂ from the metal cluster, the higher O₂ the adsorption energy obtains. The reaction barriers show that the catalytic performance of trimetallic clusters are better than those of bimetallic clusters, and Pt₂RuM clusters exhibit superior catalytic activity for O₂ dissociation. The different performance of these alloy clusters for O₂ dissociation is scrutinised with aid of molecular orbital and natural bond orbital population analysis.     

基于密度泛函理论研究掺杂Pd石墨烯吸附O2及CO

基于第一性原理的密度泛函理论研究了单个O₂和CO气体分子吸附于本征石墨烯和掺杂钯(Pd)的石墨烯的体系, 通过石墨烯掺Pd前后气体分子的吸附能、电荷转移及能带和态密度的计算, 发现掺Pd后气体分子吸附能和电荷转移显著增大, 这是由于Pd的掺杂, 在本征石墨烯能带中引入了杂质能级, 增强了石墨烯和吸附气体分子间的相互作用; 氧化性气体O₂和还原性气体CO吸附对石墨烯体系能带结构和态密度的影响明显不同, 本征石墨烯吸附O₂后, 费米能级附近态密度变大, 掺Pd后在一定程度变小; 吸附还原性的CO后, 石墨烯费米能级附近态密度几乎没有改变, 表明掺杂Pd不会影响石墨烯对CO的气体灵敏度, 但由于CO对石墨烯的吸附能增大, 可以提高石墨烯对还原性气体的气敏响应速度.     

Comparison of O–H and C–H activation of methanol on Ni-based cluster: a DFT investigation

Using the density functional theory, the initial dehydrogenation of methanol on Ni_xM_y (M?=?Ni, Co, Fe, Mn, Cr, x?+?y?=?4, y?=?1, 2) clusters is investigated. Two adsorption and dehydrogenation mechanisms of methanol are studied: one proceeds along the C–H scission and another begins with the breaking of the O-H bond. The adsorption sites of methanol on the Ni or M sites of the Ni_xM_y clusters are considered. The adsorption of methanol on Ni₄ cluster is stronger than those on bimetallic clusters, while the initial dehydrogenation barriers on Ni_xM_y clusters are lower than that on Ni₄ cluster. The comparable energy barriers of two pathways (O–H or C–H dissociation) on Ni-based clusters indicate that these two paths are quite competitive. In addition, the Ni₂M₂ clusters show superior activation performance compared with the Ni₃M clusters, especially for Ni₂Mn₂ and Ni₂Cr₂ clusters. The effects of alloyed metal on the catalytic activity of Ni for methanol initial dehydrogenation, including the adsorption energy, O–H or C–H bond scission barrier and frontier molecular orbital levels, are discussed. It can be concluded that the addition of Co, Fe, Mn and Cr to Ni catalyst is able to enhance the activity of the methanol dehydrogenation reaction.     

Ionic conduction and chemical bonds of Li ion in La4/3−yLi3yTi2O6

The electronic state of La_4/3−yLi_3yTi₂O₆ (y=0.21) was studied by the DV-Xα cluster method. Four model clusters were used to calculate the density of state (DOS), the bond overlap population (BOP) and the net charge (NC). A Li ion in the model cluster was moved from 1b site to another 1b site along the x axis, and the BOP and the NC calculated were discussed. Furthermore, we calculated the potential energy with the movement of the Li ion along the x axis. Paper presented at the Patras Conference on Solid State Ionics - Transport Properties, Patras, Greece, Sept. 14 – 18, 2004.     

First-principles study of small palladium clusters on NiAl(1 1 0) alloy surface

Theoretical calculations focused on the geometry, stability, electronic and magnetic properties of small palladium clusters Pd_n (n=1–5) adsorbed on the NiAl(1 1 0) alloy surface were carried out within the framework of density functional theory (DFT). In agreement with the experimental observations, both Ni-bridge and Al-bridge sites are preferential for the adsorption of single palladium atom, with an adsorption energy difference of 0.04 eV. Among the possible structures considered for Pd_n (n=1–5) clusters adsorbed on NiAl(1 1 0) surface, Pd atoms tend to form one-dimensional (1D) chain structure at low coverage (from Pd₁ to Pd₃) and two-dimensional (2D) structures are more stable than three-dimensional (3D) structures for Pd₄ and Pd₅. Furthermore, metal-substrate bonding prevails over metal–metal bonding for Pd cluster adsorbed on NiAl(1 1 0) surface. The density of states for Pd atoms of Pd/NiAl(1 1 0) system are strongly affected by their chemical environment. The magnetic feature emerged upon the adsorption of Pd clusters on NiAl(1 1 0) surface was due to the charge transfer between Pd atoms and the substrate. These findings may shade light on the understanding of the growth of Pd metal clusters on alloy surface and the construction of nanoscale devices.     

Molecular orbital study of germanium,germanium-gallium and germanium-arsenic clusters

The quasirelativistic INDO/1 method has been used to generate molecular orbitals for some {Ge _x }, doped {Ge _x Ga _y } and {Ge _x As _y } clusters. These one-electron energy levels predefine the density of states (DOS) and/or hole functions. The effect of the cluster size (x=24, 56, 92) and that of dopants on the DOS profiles are discussed. The calculations are compared with those generated by periodic crystal orbitals of the EHT quality.     

The catalytic activity of chemisorbed oxygen and carbon monoxide species on palladium and related metals investigated using SCF-Xα-SW calculations

Theoretical calculations of the electronic structure of small clusters modelling the adsorption of carbon monoxide on nickel and palladium and the adsorption of oxygen on palladium and platinum have been carried out using the SCF-Xα-SW method. Our results for the carbon monoxide-nickel clusters are in good agreement with earlier work. Comparing the carbon monoxide-nickel with the carbon monoxide-palladium results, suggests that the ordering of CO-derived cluster orbitals is the same in both cases but that the relative shifts are much different. In addition, the oxygen atom participates more significantly in the cluster containing palladium. An analysis of optical transition energies for Ni₅CO and Pd₅CO clusters is given and discussed in terms of experimental data regarding photodesorption of carbon monoxide. In the case of oxygen atoms in platinum and palldium clusters, we have used two different M₅O geometries: one in which the five metal atoms are in a single plane and oxygen is directly over a single metal atom (Type A) and a second in which the oxygen atom is coordinated to four sur face metal atoms and is directly over a metal atom in the second layer (Type B). The levels calculated for the Pd50 type B cluster are in good agreement with available UPS data. Significant differences in type A and type B clusters are noted for palladium. The results can be correlated with experimental Auger spectroscopic and kinetic data. In particular, the type A oxygen cor relates well with an experimentally observed very reactive species, while type B oxygen cor relates well with a quite unreactive species. These two types also correlate with two species observed by Auger spectroscopy.     

Density functional theory analysis of reactivity of PtxPdy alloy clusters

We investigate the reactivity of various Pt_xPd_y combinations (with x + y = 10 and various x:y ratios) towards the adsorption of specific intermediates of the oxygen reduction, using the B3PW91 hybrid density functional theory. The reactivity is shown to be not only sensitive to the composition of the cluster, but also to the atomic distribution. The calculations indicate that two different ensembles: one ordered and one randomly mixed, with overall composition Pt₃Pd₇ are thermodynamically more favorable than pure Pt₁₀ for the oxygen reduction reaction. The reasons for this behavior are clearly explained in terms of the atomic and electronic distribution, which makes the Pd atoms to act as electron donors both to Pt atoms and to the adsorbates, thus the reactivity of the Pd atoms in such environment becomes intermediate between Pt and Pd. Moreover, it is found that in a mixed Pt₃Pd₇ state the electronic distribution makes the average atom more similar to Pt than to Pd, whereas in an ordered Pt₃Pd₇ cluster, the average atom is more similar to Pd than to Pt.     

Structural, electronic and vibrational properties of indium oxide clusters

Geometric, electronic and vibrational properties of the most stable and energetically favourable configurations of indium oxide clusters In_mO_n (1≤m, n≤4) are investigated using density functional theory. The lowest energy geometries prefer the planar arrangement of the constituent atoms with a trend to maximize the number of ionic In-O bonds. Due to the charge transfer from In to O atoms, the electrostatic repulsion occurs between the atoms with the same kind of charge. The minimization of electrostatic repulsion and the maximization of In-O bond number compete between each other and determine the location of the isometric total energy. The most stable linear In-O-In-O structure of In₂O₂ cluster is attributed to the reduced electrostatic repulsive energy at the expense of In-O bond number, while the lowest energy rhombus-like structure of In₂O₃ cluster reflects the maximized number of In-O bonds. Furthermore, the vibrational frequencies of the lowest energy clusters are calculated and compared with the available experimental results. The energy gap and the charge density distribution for clusters with varying oxygen/indium ratio are also discussed.     

Study of (Al2O3)n(Ox) clusters with n = 16 and x = 0, 1, 2 from first principles calculations

The ionic and electronic structure of (Al₂O₃)_n(O_x) clusters with n 16 and x = 0, 1, 2 is studied by means of first principles density functional calculations, norm-conserving pseudopotentials and a numerical atomic basis set. The equilibrium geometries have been determined by total energy minimization, starting with several initial geometries for each cluster size. The trends obtained for the atomic arrangements (structural isomers, coordination numbers, disordered versus ordered structures, etc.) and the electronic properties (binding energies, Homo-Lumo gap and dipole moments) are discussed. For most of the oxidized clusters studied here we find that the Homo-Lumo gap and the magnitude of dipole moment of isomeric species can vary drastically.     

Composition dependent self‐regenerative property of perovskite‐type oxides

The self‐regenerative property of LaCo_{1–x –y}Pd_x Zn_y O_3±δ and LaFe_{1–x –y}Pd_x Zn_y O_3±δ solid solutions with monometallic Pd or bimetallic Pd/Zn substituents for Co or Fe is studied under a redox cycle by high angular annular dark‐field scanning transmission electron microscopy (STEM‐HAADF) and energy dispersive X‐ray spectroscopy (EDX) and X‐ray diffraction (XRD). These results reveal that the composition of perovskites determines the self‐regenerative property that occurs largely in LaCo_{1–x –y}Pd_x Zn_y O_3±δ but is limited greatly in LaFe_{1–x –y}Pd_x Zn_y O_3±δ. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Size-dependent oxidation of Pdn (n 13) on alumina/NiAl(110): Correlation with Pd core level binding energies

Small Pd clusters Pd_n (n = 1, 4, 7, 10, 13) deposited on alumina/NiAl(110) at room temperature were examined by X-ray photoelectron spectroscopy (XPS), as-deposited and after exposure to O₂ at temperatures ranging from 100 to 500 K. After O₂ exposure at 100 K, the Pd clusters showed XPS shifts indicative of oxidation. The exception was Pd₄, which did not oxidize under any conditions. The inertness of Pd₄/alumina/NiAl(110) appears to be correlated with a significantly higher-than-expected Pd 3d binding energy, which we attribute to a particularly stable valence shell. None of the clusters examined oxidized during O₂ exposures at 300 K or above, but He⁺ scattering showed that oxygen was bound on the cluster surfaces. Upon heating, all the oxygen associated with these small clusters appeared to spill over and react with the alumina/NiAl(110) support.     

Effect of γ-Al2O3 substrate on NO2 interaction with supported BaO clusters

BaO oxide is the main storage component of the NO_x storage and reduction catalysts. Herein, the interactions between the NO₂ molecule and the unsupported as well as γ-Al₂O₃ supported BaO clusters have been studied using the first principle density functional theory calculation. Our results indicated that there is a strong synergetic effect involving both the BaO clusters and the surface of the γ-Al₂O₃ substrate toward NO₂ adsorption. The interfacial region between the monodispersed BaO cluster and the substrate surface that allows NO₂ to bond with the cluster and the surface simultaneously was shown to be optimal for NO₂ adsorption.     

Electronic structure of high-temperature superconductors I. Y-Ba-Cu-O systems

The electronic structure of high-T _c copper based superconductors has been studied using the quasirelativistic INDO molecular orbital method. Model clusters of YBa₂Cu₃O _y systems have been investigated fory ranging between 6·0 and 7·0. Monomeric units [Ba₈Cu₃O _x ] ^q and [Y₄Ba₈Cu₄O _x ] ^q , dimeric units [Ba₁₂Cu₆O _x ] ^q and [Y₆Ba₁₂Cu₈O _x ] ^q as well as tetrameric units [Ba₁₈Cu₁₂O _x ] ^q over 300 valence orbitals have been studied. From the set of occupied molecular orbitals the density of states (DOS) function has been calculated along with its d-orbital projection. The highest occupied molecular orbitals cover the oxygen p-band whereas the copper d-band lies at lower energies. Superconducting phase models (y=6·75 to 7·0) have a higher d-DOS function at higher energies with respect to the non-superconducting phase (y=6·0).     

Geometries,stabilities, electronic and magnetic properties of small PdnIr (n = 1–8) clusters from first-principles calculations

The geometrical structures, relative stabilities, electronic and magnetic properties of small Pd_nIr (n = 1–8) clusters have been systematically investigated using density functional theory at the B3PW91 level. The optimised geometries show that the lowest-energy structures of Pd_nIr clusters prefer a three-dimensional configuration. The relative stability of these clusters was examined by analysis of the binding energies per atom, fragmentation energies, the second-order difference of energies and the HOMO–LUMO energy gaps as a function of cluster size. The obtained results exhibit that the Pd₂Ir, Pd₃Ir and Pd₅Ir clusters are more stable than their neighbouring clusters. The energy gap of the Pd₂Ir cluster is the largest of all the clusters (2.258 eV). In addition, the charge transfers, vertical ionisation potentials, vertical electron affinities and chemical hardness were calculated and discussed. The magnetism calculations indicate that the total magnetic moment of Pd_nIr clusters is mainly localised on the iridium atom for Pd_1–6Ir clusters. Meanwhile, the 5d orbital plays the key role in the magnetic moment of the iridium atom.     

Experimental and Theoretical Studies on the Interaction between Isonicotinic Acid Molecules and Silver Nanoclusters

The present paper describes the studies on the adsorption behavior and charge transfer from isonicotinic acid to silver nanoparticles with experiment and theory. Compared with UV–Visible adsorption spectrum, the adsorption spectrum of Ih-Ag₁₃ cluster was quite good agreed with that of silver colloidal nanoparticle. So that one Ag₁₃ cluster as a substrate was used to simulate Raman frequencies of the adsorption configuration. Here, it is demonstrated the calculated Raman spectra are in good agreement with experimental results. The analysis of Mulliken charge was obtained by density functional theory, which indicated the charge characteristics of Ag₁₃ nanoparticle. Once isonicotinic acid molecules were adsorbed on sliver clusters, the charges transfer from isonicotinic acid to silver clusters, so that the surface charges of silver clusters are uneven.     

Observation of self-regulating response in LixMyMn2−yO4 (M=Mn, Ni): A study using density functional theory

Density functional theory is used to understand the response of the transition metal-oxygen octahedra in Li_xMn₂O₄ and Li_xNi_0.5Mn_1.5O₄ to lithium intercalation and de-intercalation. Electronic structure computations on these compounds for x=0, 0.5 and 1 indicate that the 3d DOS of Mn is almost unaffected to variations in x. On the other hand, the oxygen 2p-DOS and to a lesser extent Ni 3d DOS are found to be sensitive to perturbation. The observations are explained on the grounds of self-regulating response, characteristic of systems having localized d states that communicate with a covalent manifold.     

Size-dependent oxidation of Pdn (n ? 13) on alumina/NiAl(110): Correlation with Pd core level binding energies

Small Pd clusters Pd_n (n = 1, 4, 7, 10, 13) deposited on alumina/NiAl(110) at room temperature were examined by X-ray photoelectron spectroscopy (XPS), as-deposited and after exposure to O₂ at temperatures ranging from 100 to 500 K. After O₂ exposure at 100 K, the Pd clusters showed XPS shifts indicative of oxidation. The exception was Pd₄, which did not oxidize under any conditions. The inertness of Pd₄/alumina/NiAl(110) appears to be correlated with a significantly higher-than-expected Pd 3d binding energy, which we attribute to a particularly stable valence shell. None of the clusters examined oxidized during O₂ exposures at 300 K or above, but He⁺ scattering showed that oxygen was bound on the cluster surfaces. Upon heating, all the oxygen associated with these small clusters appeared to spill over and react with the alumina/NiAl(110) support.     

Hybrid-DFT study for the initial oxidation steps on silicon cluster surface

We performed a hybrid density functional theory calculation for the successive adsorption of nitrous oxide (N₂O) on Si(1 0 0)-Si₉H₁₂O_x (x = 0 and 1) cluster surfaces to elucidate N₂O decomposition and the subsequent surface oxidation processes. N₂O decomposed into N₂ and O fragments, and the latter fragment inserted into either surface-dimer bonds or back-bonds with similar activation barriers on both the clean and partially oxidized Si surfaces. The Si₉H₁₂ cluster surface was eventually oxidized to five distinct structures of Si₉H₁₂O₂.