A Note on the Removal of Further Breakdowns in Classical Solutions of Laplace"s Equation on Sectorial Regions

This note considers solutions to Laplace"s equation on sectors with varying vertex angles. Under Neumann conditions on the radial boundaries, there are two critical vertex angles for which classical separable solutions break down. These breakdowns have been noted in the literature and resolved. Here Dirichlet and mixed conditions are also treated. For all three boundary conditions in combination, nine further critical angles are identified and valid corresponding solutions found. This revised version was published online in August 2006 with corrections to the Cover Date.     

Symplectic solution system for reissner plate bending

Based on the Hellinger-Reissner variatonal principle for Reissner plate bendingand introducing dual variables, Hamiltonian dual equations for Reissner plate bending werepresented. Therefore Hamiltonian solution system can also be applied to Reissner platebending problem, and the transformation from Euclidian space to symplectic space and fromLagrangian system to Hamiltonian system was realized. So in the symplectic space whichconsists of the original variables and their dual variables, the problem can be solved viaeffective mathematical physics methods such as the method of separation of variables andeigenfunction-vector expansion. All the eigensolutions and Jordan canonical formeigensolutions for zero eigenvalue of the Hamiltonian operator matrix are solved in detail, and their physical meanings are showed clearly. The adjoint symplectic orthonormal relation of the eigenfunction vectors for zero eigenvalue are formed. It is showed that the alleigensolutions for zero eigenvalue are basic solutions of the Saint-Venant problem and theyform a perfect symplectic subspace for zero eigenvalue. And the eigensolutions for nonzeroeigenvalue are covered by the Saint-Venant theorem. The symplectic solution method is notthe same as the classical semi-inverse method and breaks through the limit of the traditional semi-inverse solution. The symplectic solution method will have vast application.     

Stokes’ first problem for a second grade fluid in a porous half-space with heated boundary

Based on a modified Darcy's law, Stokes’ first problem was investigated for a second grade fluid in a porous half-space with a heated flat plate. Exact solutions of the velocity and temperature fields were obtained using Fourier sine transforms. In contrast to the classical Stokes’ first problem, there is a steady-state solution for the second grade fluid in the porous half-space, which is a damping exponential function with respect to the distance from the flat plate. The well-known solutions for Newtonian fluids in non-porous or porous half-space appear in limiting cases of our solutions.     

ANALYTICAL RELATIONS BETWEEN EIGENVALUES OF CIRCULAR PLATE BASED ON VARIOUS PLATE THEORIES

Based on the mathematical similarity of the axisymmetric eigenvalue problems of a circular plate between the classical plate theory(CPT), the first-order shear deformation plate theory(FPT) and the Reddy's third-order shear deformation plate theory (RPT), analytical relations between the eigenvalues of circular plate based on various plate theories are investigated. In the present paper, the eigenvalue problem is transformed to solve an algebra equation. Analytical relationships that are expressed explicitly between various theories are presented. Therefore, from these relationships one can easily obtain the exact RPT and FPT solutions of critical buckling load and natural frequency for a circular plate with CPT solutions. The relationships are useful for engineering application, and can be used to check the validity, convergence and accuracy of numerical results for the eigenvalue problem of plates.     

Bending of annular sectorial Mindlin Plates using Kirchhoff results

This study is concerned with the elastic bending problem of a class of annular sectorial plates whose radial edges are simply supported. Exact bending relationships between the Mindlin plate results and the corresponding Kirchhoff plate solutions have been derived based on the concept of load equivalence. These bending relationships facilitate the deduction of thick (Mindlin) plate results from the corresponding classical thin (Kirchhoff) plate solutions, thus bypassing the need to solve the more complicated governing equations of thick plates. The correctness of the relationships is established by solving the bending problem of annular sectorial plates under a uniformly distributed load and comparing the results with existing thick plate solutions.     

A rigid triangular inclusion partially bonded in an elastic matrix

The two-dimensional problem of a rigid rounded-off angle triangular inclusion partially bonded in an infinite elastic plate is studied. The unbonded part of the inclusion boundary forms an interfacial crack. Based on the complex variable method for curvilinear boundaries, the problem is reduced to a non-homogeneous Hilbert problem and the stress and displacement fields in the plate are obtained in closed form. Special attention is paid in the investigation of the stress field in the vicinity of the crack tip. It is found that the stresses present an oscillatory singularity and the general equations for the local stresses are derived. The singular stress field is coupled with the maximum circumferential stress and the minimum strain energy density criteria to study the fracture characteristics of the composite plate. Results are given for the complex stress intensity factors, the local stresses, the crack extension angles and the critical applied loads for unstable crack growth from its more vulnerable tip or two types of interfacial cracks along the inclusion boundary.     

Ultrasonic field modeling in plates immersed in fluid

Distributed Point Source Method (DPSM) is a semi-analytical technique that can be used to calculate the ultrasonic field (pressure, velocity and displacement fields in a fluid, or stress and displacement fields in a solid) generated by ultrasonic transducers. So far the technique has been used to model ultrasonic fields in homogeneous and multilayered fluid structures, and near a fluid–solid interface when a solid half-space is immersed in a fluid. In this paper, the method is extended to model the ultrasonic field generated in a homogeneous isotropic solid plate immersed in a fluid. The objective of this study is to model the generation of guided waves in a solid plate when ultrasonic beams from transducers of finite dimension strike the plate at different critical angles. DPSM results for a solid half-space problem are compared with the finite element predictions to show the superiority of the DPSM technique. The predicted results are also compared with the experimental visualization of the mode patterns of Lamb waves propagating in a glass plate obtained from stroboscopic photoelastic method. Experimental and theoretical results show good qualitative agreement. The DPSM technique is then applied to study the mode patterns in aluminum plates immersed in water.     

The critical angle of the anisotropic elastic wedge subject to uniform tractions

The classical solution for an isotropic elastic wedge loaded by a uniform pressure on one side of the wedge becomes infinite when the wedge angle 2₀ satisfies the equation tan 2₀ = 2₀. This is the critical wedge angle which also renders infinite solutions for other types of loadings. In this paper, we study the associated problem for the anisotropic elastic wedge. We first present uniform stress solutions which are possible for symmetric loadings. For antisymmetric loadings, a uniform stress solution is in general not possible and we present a non-uniform stress solution in which the stress depends on but not on r. The non-uniform stress solution breaks down at a critical angle. We present an equation for the critical angle which depends on the elastic constants. The Stroh formalism is employed in the analysis. An integral representation of the solution is obtained by using new identities which are derived in the paper.     

On canonical bending relationships for plates

In recent years, a series of papers have appeared on algebraic relationships between the solutions (e.g., deflections, buckling loads and frequencies) of a given higher-order plate theory and the classical plate theory. The bending relationships, for example, can be used to generate the transverse deflection of a plate according to the particular higher-order theory from the known deflection of the same problem according to the classical plate theory. In the present study relationships between the bending solutions of several higher-order plate theories and the classical plate theory are obtained in a canonical form (i.e., one set of relationships contain several theories and they can be specialized to a specific theory by assigning values to the constants appearing in the relationships). Numerical examples of bending solutions for rectangular plates with various boundary conditions are presented to show how the relations can be used to determine the deflections and bending moments for various theories. The relationships are validated by comparing the numerical results obtained using the relationships for the Mindlin plate theory against those computed using the ABAQUS finite element program.     

A Variational Approach for the Navier–Stokes System

We introduce a variational approach to treat the regularity of the Navier–Stokes equations both in dimensions 2 and 3. Though the method allows the full treatment in dimension 2, we seek to precisely stress where it breaks down for dimension 3. The basic feature of the procedure is to look directly for strong solutions, by minimizing a suitable error functional that measures the departure of feasible fields from being a solution of the problem. By considering the divergence-free property as part of feasibility, we are able to avoid the explicit analysis of the pressure. Two main points in our analysis are:

Torsion of a square isotropic plate by forces applied at the corners and by distributed torques

We consider the classical problem of the theory of elastic plates, namely, the problem on the torsion of a square isotropic plane by forces applied at the corners. The traditional solution of this problem based on the classical theory of plates and Kirchhoff and Thomson–Tait transformations is compared with the solution obtained in the improved theory of plates and with experimental results. The solution, which does not exist in the classical theory of plates, of the problem on the torsion of a plate by torques uniformly distributed over the plate contour is presented as well.     

Bending Solutions for Inhomogeneous and Laminated Elastic Plates

A procedure has been developed in previous papers for constructing exact solutions of the equations of linear elasticity in a thick plate of inhomogeneous isotropic linearly elastic material in which the elastic moduli depend in any specified manner on a coordinate normal to the plane of the plate. The essential idea is that any solution of the classical thin plate or classical laminate theory equations (which are two-dimensional theories) generates, by straightforward substitutions, a solution of the three-dimensional elasticity equations for the homogeneous material. Recently this theory has been formulated in terms of functions of a complex variable. It was shown that the displacement and stress fields in the inhomogeneous material could be expressed in terms of four complex potentials that are analytic functions of the complex variable ζ = x + iy in the mid-plane of the plate. However, the analysis performed so far applies only to the case of a plate with traction-free upper and lower faces. The present paper extends these solutions to the case where the plate is bent by a pressure distribution applied to a face.     

Three-dimensional elasticity solution for bending of transversely isotropic functionally graded plates

This paper presents a three-dimensional elasticity solution for a simply supported, transversely isotropic functionally graded plate subjected to transverse loading, with Young’s moduli and the shear modulus varying exponentially through the thickness and Poisson’s ratios being constant. The approach makes use of the recently developed displacement functions for inhomogeneous transversely isotropic media. Dependence of stress and displacement fields in the plate on the inhomogeneity ratio, geometry and degree of anisotropy is examined and discussed. The developed three-dimensional solution for transversely isotropic functionally graded plate is validated through comparison with the available three-dimensional solutions for isotropic functionally graded plates, as well as the classical and higher-order plate theories.     

Bucklewaves

Motivated by a selection of results on the plastic buckling of column members within a sandwich plate core where one face of the sandwich is subject to an intense impulse, the problem addressed is one where lateral buckling takes place simultaneously as a compressive axial wave propagates down the member. The bucklewave problem is modeled as an infinitely long column (or wide plate) which is clamped against lateral deflection at the end where velocity is imposed and has a moving clamped condition coinciding with the front of the plastic compression wave. The model reveals that a column or plate suddenly compressed into the plastic range is dynamically stabilized against lateral buckling for lengths that are significantly longer than the corresponding length at which the member would buckle quasi-statically. This stabilization has significant implications for energy absorption under intense dynamic loading. The analysis method is benchmarked against a simpler, but mathematically analogous problem, for which closed form solutions are available: the dynamics of a guitar string lengthening at constant velocity.     

Inclusions and inhomogeneities in strain gradient elasticity with couple stresses and related problems

At small length scales and/or in presence of large field gradients, the implicit long wavelength assumption of classical elasticity breaks down. Postulating a form of second gradient elasticity with couple stresses as a suitable phenomenological model for small-scale elastic phenomena, we herein extend Eshelby’s classical formulation for inclusions and inhomogeneities. While the modified size-dependent Eshelby’s tensor and hence the complete elastic state of inclusions containing transformation strains or eigenstrains is explicitly derived, the corresponding inhomogeneity problem leads to integrals equations which do not appear to have closed-form solutions. To that end, Eshelby’s equivalent inclusion method is extended to the present framework in form of a perturbation series that then can be used to approximate the elastic state of inhomogeneities. The approximate scheme for inhomogeneities also serves as the basis for establishing expressions for the effective properties of composites in second gradient elasticity with couple stresses. The present work is expected to find application towards nano-inclusions and certain types of composites in addition to being the basis for subsequent non-linear homogenization schemes.     

An inverse problem for a functionally graded elliptical plate with large deflection and slightly disturbed boundary

This paper deals with the inverse problem of a functionally graded material (FGM) elliptical plate with large deflection and disturbed boundary under uniform load. The properties of functionally graded material are assumed to vary continuously through the thickness of the plate, and obey a simple power law expression based on the volume fraction of the constituents. Based on the classical nonlinear von Karman plate theory, the governing equations of a thin plate with large deflection were derived. In order to solve this non-classical problem, a perturbation technique was employed on displacement terms in conjunction with Taylor series expansion of the disturbed boundary conditions. The displacements of in-plane and transverse are obtained in a non-dimensional series expansion form with respect to center deflection of the plate. The approximate solutions of displacements are solved for the first three terms, and the corresponding internal stresses can also be obtained.     

数学规划加权残值法分析薄板与薄壳的几何非线性问题

使用数学规划加权残值涯分析了薄板大挠度及薄壳的非线性稳定问题。在两者应变协调方程严格满足的情况下,论证并利用平衡方程的单调性,建立数学规划问题,首先得到无布载荷四边简支方板中心挠度的最小上界及最大下界,经典Ｌｅｖｙ解位基其间。     

On the anti-plane shear of an elliptic nano inhomogeneity

The elastic field of an elliptic nano inhomogeneity embedded in an infinite matrix under anti-plane shear is studied with the complex variable method. The interface stress effects of the nano inhomogeneity are accounted for with the Gurtin–Murdoch model. The conformal mapping method is then applied to solve the formulated boundary value problem. The obtained numerical results are compared with the existing closed form solutions for a circular nano inhomogeneity and a traditional elliptic inhomogeneity under anti-plane. It shows that the proposed semi-analytic method is effective and accurate. The stress fields inside the inhomogeneity and matrix are then systematically studied for different interfacial and geometrical parameters. It is found that the stress field inside the elliptic nano inhomogeneity is no longer uniform due to the interface effects. The shear stress distributions inside the inhomogeneity and matrix are size dependent when the size of the inhomogeneity is on the order of nanometers. The numerical results also show that the interface effects are highly influenced by the local curvature of the interface. The elastic field around an elliptic nano hole is also investigated in this paper. It is found that the traction free boundary condition breaks down at the elliptic nano hole surface. As the aspect ratio of the elliptic hole increases, it can be seen as a Mode-III blunt crack. Even for long blunt cracks, the surface effects can still be significant around the blunt crack tip. Finally, the equivalence between the uniform eigenstrain inside the inhomogeneity and the remote loading is discussed.     

Effect of the source term on steady free convection boundary layer flows over a vertical plate in a porous medium. Part II

The problem of steady free convection boundary layer over a vertical isothermal impermeable flat plate which is embedded in a fluid-saturated porous medium with volumetric heat generation or absorption is studied in this paper using the Darcy equation model. The case of the externally prescribed source terms S = S(x,y) is considered in this paper. It is shown that the corresponding boundary value problem depends on the sign of the plate temperature, which implies that the source term breaks the usual upflow or downflow symmetry of the free convection problem. Looking for similarity solutions, analytical and numerical solutions of the transformed boundary value problem are obtained for several values of the problem parameters. It is also shown that, contrary to the widely spread opinion, the exponential form of the internal heat generation term is not a necessary requirement of similarity reduction.     

非保守圆薄板的轴对称振动和稳定性

建立了受切向均布随从力作用的圆薄板在面内周边可移、不可移两种情况下的轴对称控制方程，用打靶法直接导出求解变系数常微分方程特征值问题数值解的计算式．通过数值计算，给出了周边可移、不可移的简支、固支圆板自振频率和临界载荷的特征曲线以及相应的临界发散载荷，并分析了泊松比对圆板自振频率和临界载荷的影响．