聚甲基丙烯酸甲酯-聚甲基丙烯酸两亲性嵌段共聚物的制备及自组装形态的研究

以2-溴异丁酸乙酯为引发剂, 氯化亚铜/联二吡啶为催化剂, 通过原子转移自由基聚合(ATRP)获得分子链末端含一个α-溴原子的聚甲基丙烯酸甲酯(PMMA-Br), 以此为大分子引发剂引发甲基丙烯酸铅[Pb(MA)₂]单体进行ATRP反应, 制得P[MMA-b-Pb(MA)_2]嵌段共聚物, 将此共聚物在盐酸中进行离子交换即得聚甲基丙烯酸甲酯-聚甲基丙烯酸的两亲性嵌段共聚物[P(MMA-b-MAA)]. 用FTIR, GPC, NMR和SEM方法对共聚物进行了表征.     

聚丙烯酸叔丁酯-b-聚(N-异丙基丙烯酰胺)嵌段共聚物的制备及其自组装

以氯化亚铜/N,N,N′,N″,N″-五甲基二乙撑三胺为催化体系、丁酮和异丙醇为混合溶剂,采用原子转移自由基聚合法制备了大分子引发剂聚丙烯酸叔丁酯(PtBA-Cl)和聚丙烯酸叔丁酯-b-聚(N-异丙基丙烯酰胺)(PtBA-b-PNIPAM)两亲性嵌段共聚物.用红外光谱和核磁共振谱表征 PtBA-b-PNIPAM 嵌段共聚物的结构,动态光散射及透射电镜研究嵌段共聚物在溶液中的温度响应性.结果表明:胶束的体积相转变温度在 33℃左右;随着温度的增加,胶柬的粒径逐渐减小.     

两亲性嵌段共聚物的自组装及载药胶束的研究

采用可逆-加成-断裂链转移自由基聚合(RAFT)技术合成了两亲性嵌段共聚物聚苯乙烯-b-聚甲基丙烯酸聚乙二醇单甲醚-b-聚苯乙烯(PSt-b-POEOMA-b-PSt),通过FT-IR、1 HNMR、GPC确定共聚物的结构。将三个具有不同嵌段比的共聚物在水溶液中自组装,通过透射电子显微镜(TEM)观察得到的胶束的形貌,发现随着亲水性嵌段的比例减小,胶束的直径略微减小。通过透析方法,以共聚物作为载体,负载维生素E,TEM观察载药胶束的形貌,仍然为核-壳状的球形胶束。差示扫描量热仪(DSC)测试共聚物载药胶束前后的热性能,发现药物分子在载入内核的过程中,聚苯乙烯的玻璃化转变温度(Tg)有所降低。通过紫外(UV)分析计算得出共聚物的药物负载量(DLC)为70%～80%。     

三嵌段共聚物PAN-b-PEG-b-PAN的合成及其自组装行为的研究

利用原子转移自由基聚合(ATRP)制得了分子量可控、分子量分布窄的聚丙烯腈-b-聚乙二醇-b-聚丙烯腈P(AN-b-PEG-b-PAN)嵌段共聚物. 通过¹H NMR, FTIR, 凝胶渗透色谱(GPC)对所得产物的结构和分子量进行了表征并通过TG和DTA考察了该嵌段共聚物的热稳定性; 运用透射电子显微镜(TEM)、荧光探针技术和动态光散射(DLS)研究了P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇在溶剂水中胶束的形成、结构、形貌和胶束粒径. 结果表明, 三嵌段共聚物P(AN)₂₇-b-P(EG)₄₅-b-P(AN)₂₇的热稳定性较纯聚乙二醇P(EG)好, 且柔性链PEG的引入对嵌段共聚物的放热峰位置没有显著的影响. 当改变此嵌段共聚物溶液浓度时, 该嵌段共聚物会自组装成不同形状的胶束, DLS测量的胶束粒径大于TEM观察的结果, 其临界胶束浓度(cmc)约为4.46×10^－4 g•L^－1.     

机理转移法合成聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)两亲性嵌段共聚物

将活性负离子聚合与原子转移自由基聚合(ATRP)技术相结合,运用机理转移法制备了一种两亲性材料聚丁二烯-b-聚(甲基丙烯酸N,N-二甲氨基乙酯)(PB-b-PDMAEMA)嵌段共聚物.首先通过负离子聚合方法设计合成聚丁二烯,用环氧丙烷封端,2-溴异丁酰溴作酯化剂,合成具有活性端基溴的聚丁二烯大分子引发剂(PB-B r),再用其引发亲水性单体DMAEMA进行原子转移自由基聚合,聚合动力学证实了该聚合反应具有典型的活性/可控自由基聚合的特征.通过差示扫描量热法(DSC)研究嵌段共聚物的微相分离行为.制备的大分子引发剂及两亲性嵌段共聚物经凝胶色谱、红外和核磁表征证实了预定的结构.     

经两亲嵌段共聚物自组装制备纳米胶束

本文介绍两亲嵌段共聚物的合成,综述了经两亲嵌段共聚物自组装制备纳米胶束的研究进展,并对该领域的发展趋势进行了展望。     

窄分布两亲性嵌段共聚物的合成及其胶束化行为研究

利用原子转移自由基聚合合成了具有两亲性的嵌段聚合物聚苯乙烯-b-聚丙烯酸(PS-b-PAA),用FTIR,¹H NMR,SEC对其进行了表征,并利用荧光探针技术研究了其在水溶液中的胶束化行为.进一步的研究表明,PS-b-PAA胶束可对水中存在的多环芳香化合物芘有效地吸收并进而分离和回收.     

嵌段共聚物溶液自组装制备纳米管状聚集体

作为一种新型材料,具有独特一维空心结构的纳米管受到了越来越多的关注。与研究较为广泛的碳纳米管和两亲性小分子纳米管相比,聚合物纳米管在尺寸范围、内外表面功能化及结构稳定性等方面具有优势。本文总结了嵌段共聚物在选择性溶剂中自组装形成纳米管状聚集体的最新研究进展。根据形成纳米管状结构的嵌段共聚物链段的性质,可将其划分为柔性-柔性嵌段共聚物、刚性-柔性嵌段共聚物,以及具备特殊结构的类嵌段共聚物三大类。针对每一类体系,重点归纳了管状结构的制备方法、结构表征和形成条件等研究现状,并概括总结了制备此类一维空心结构的理论依据。最后,对嵌段共聚物纳米管潜在的应用价值和今后可能的发展方向进行了展望。     

星型两亲性聚己内酯-b-聚甲基丙烯酸(2-羟乙酯)嵌段共聚物的合成和表征

通过开环聚合(ROP)和原子转移自由基聚合(ATRP)制备了一类新型的两亲性嵌段共聚物——六臂星形聚(ε-已内酯)-b-聚甲基丙烯酸(2-羟乙酯)(6sPCL-b-PHEMA).6sPCL-b-PHEMA通过三步反应合成:(1)双季戊四醇开环聚合ε-己内酯的合成6sPCL;(2)以2-溴异丁基酰溴封端星形聚合物制备大分...     

两亲性嵌段共聚物PS-b-PMAA的合成与胶束化行为研究

利用原子转移自由基聚合法(ATRP)得到了分子量可控、分子量分布接近1.1的聚苯乙烯-b-聚甲基丙烯酸叔丁酯(PS-b-PtBMA)嵌段共聚物, 进而在酸性条件下由水解反应得到了两亲性的聚苯乙烯-b-聚甲基丙烯酸 (PS-b-PMAA)嵌段共聚物．用GPC, FTIR和¹H-NMR等对产物的分子量和组成进行了表征．使PS-b-PMAA在选择性溶剂中进行自组装, 通过激光光散射和透射电子显微镜研究了影响其胶束化行为的因素与胶束形态, 并初步探讨了胶束形成的机理, 发现通过控制嵌段共聚物的链段长度之比可得到空心球形的高分子胶束．     

结构规整的高密度两亲性接枝聚合物刷的合成及其自组装研究

大分子单体通过两种可控聚合方法, 即开环易位聚合(ROMP)和原子转移自由基聚合(ATRP)的联用, 合成一种新型两亲性接枝聚合物刷. 具有高环张力的降冰片烯单侧链大分子单体norbornene-graft-poly(ε-caprolactone)/Br (PCL- NBE-Br)首先进行ROMP反应, 生成聚合物主链, 每个单体单元上含有一条PCL链和一个溴官能团; 然后用含溴的ROMP聚合物poly(norbornene)-graft-poly(ε-caprolactone)/Br (PCL-PNBE-Br)作为大分子引发剂引发单体2-(dimethyl- amino)ethyl methacrylate)的ATRP反应, 生成结构明确的高密度两亲性接枝聚合物刷poly(norbornene)-graft-poly(ε- caprolactone)/poly(2-(dimethylamino)ethyl methacrylate) (PCL-PNBE-PDMAEMA), 其主链每个单体单元上均含有一条疏水性PCL接枝链和一条亲水性PDMAEMA接枝链. 最后, 研究此类高密度两亲性接枝聚合物刷的自组装行为, 用动态激光光散射(DLS)研究其在混合溶剂(THF/H2O)中的胶束行为, 考察胶束溶液的浓度以及不同长度的亲水性接枝链对胶束尺寸的影响; 利用透射电镜(TEM)观察胶束为球形, 具有类似线团或草莓状的形态.     

Emulsion‐Induced Ordered Microporous Films Based on Micelles of Amphiphilic Poly(ethylene oxide)‐block‐Poly(methyl methacrylate) Diblock Copolymers

Well‐defined PEO‐b‐PMMA was prepared, initiated by macroinitiator PEO‐Br, by means of ATRP, where esterification of the terminal hydroxyl group of PEO with 2‐bromoisobutyryl bromide yielded a macroinitiator PEO‐Br. Highly ordered microporous films (hexagonal pattern) were constructed by emulsion micelles of such amphiphilic diblock copolymer formed from a solution with CHCl₃/H₂O/THF = 100:5:10 (v/v). We also constructed the microporous films using diblock copolymer by the current water‐assisted method.

     

Synthesis of poly(di[methylamine]ethyl methacrylate)‐b‐poly(cyclohexyl methacrylate)‐b‐poly(di[methylamine]ethyl methacrylate) amphiphilic triblock copolymers by ATRP: Condensed‐phase and solution properties

The synthesis of amphiphilic triblock copolymers, poly(di[methylamine]ethyl methacrylate)‐b‐poly(cyclohexyl methacrylate)‐b‐poly(di[methylamine]ethyl methacrylate) PDMAE‐b‐PCH‐b‐PDMAE, has been performed by atom transfer radical polymerisation. Those have been obtained in a well‐controlled manner in terms of molecular weight and polydispersity index. The triblock copolymer characterisation has been made in condensed state and in solution. The existence of microphase separation has been confirmed by differential scanning calorimetry. However, the domains of both inner and outer blocks seem not to be ordered for one another from small‐angle X‐ray scattering (SAXS) measurements using synchrotron radiation. The micelle formation in dilute methanol solutions has been confirmed for all triblock copolymers by dynamic light scattering analyses. The size of these micelles has been demonstrated to be dependent on the molecular weight. Similar observations have been made in concentrate methanol solutions by using SAXS experiments, pointed also out that an increment of the intermicelle interactions is produced as the concentration increases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 85–92, 2008     

Preparation and Characterization of pH-Sensitive Microgels of Poly((2-dimethylamino) ethyl methacrylate)

Summary: pH-sensitive microgels of poly((2-dimethylamino) ethyl methacrylate) (PDMAEMA) were prepared by dispersion polymerization of 2-dimethylamino ethyl methacrylate in a mixed solvent of water/ethanol. ¹HNMR, FTIR and SEM were used to confirm the chemical structure and morphological properties of the resulting microgels. Dynamic Light Scattering (DLS) was used to measure the hydrodynamic diameter of the particles. SEM micrographs showed that the microgel particles have a diameter of about 100–200 nm in dry state. Mean hydrodynamic diameter of the particles at their collapsed state at pH = 9.5 was found to be about 150 nm. DLS measurements at various pH values showed that the prepared microgels have a volume phase transition around pH = 8 at which the hydrodynamic diameter decreased from about 470 nm to around 150 nm corresponding to a 32 fold change in the mean volume of a microgel particle.     

Poly(2-(dimethylamino)ethyl methacrylate)-b-poly(hydroxypropyl methacrylate) copolymers/bovine serum albumin complexes in aqueous solutions

Complexation ability of poly(2-(dimethylamino)ethyl methacrylate)-b-poly(hydroxy propyl methacrylate) (PDMAEMA-b-PHPMA) amphiphilic doubly thermo-responsive block copolymers, and their quaternized counterparts QPDMAEMA-b-PHPMA, toward bovine serum albumin (BSA) is studied in aqueous solutions. The PDMAEMA-b-PHPMA amphiphilic block copolymers self-assemble in nanostructured aggregates with PDMAEMA coronas having different inner structure and micro-polarity depending on the solubilization protocol utilized when inserted in aqueous media. By incorporating different BSA concentrations, we investigate the copolymer–protein interactions by light scattering measurements in aqueous solutions in a broad temperature range, utilizing different solubilization protocols for the copolymers. Fluorescence spectroscopy and ζ-potential measurements were also utilized to investigate the structure and properties of the copolymer/protein complexes formed in each case. Such knowledge may lead to a better understanding of the inner structure and micro polarity of the nanostructured aggregates formed by the novel (Q)PDMAEMA-b-PHPMA copolymers, along with their potential abilities in nanocarrier formation, protein complexation, stabilization, and delivery.     

Synthesis of coil‐comb block copolymers containing polystyrene coil and poly(methyl methacrylate) side chains via atom transfer radical polymerization

A series of polystyrene‐b‐(poly(2‐(2‐bromopropionyloxy) styrene)‐g‐poly(methyl methacrylate)) (PS‐b‐(PBPS‐g‐PMMA)) and polystyrene‐b‐(poly(2‐(2‐bromopropionyloxy)ethyl acrylate)‐g‐poly(methyl methacrylate)) (PS‐b‐(PBPEA‐g‐PMMA)) as new coil‐comb block copolymers (CCBCPs) were synthesized by atom transfer radical polymerization (ATRP). The linear diblock copolymer polystyrene‐b‐poly(4‐acetoxystyrene) and polystyrene‐b‐poly(2‐(trimethylsilyloxy)ethyl acrylate) PS‐b‐P(HEA‐TMS) were obtained by combining ATRP and activators regenerated by electron transfer (ARGET) ATRP. Secondary bromide‐initiating sites for ATRP were introduced by liberation of hydroxyl groups via deprotection and subsequent esterification reaction with 2‐bromopropionyl bromide. Grafting of PMMA onto either the PBPS block or the PBPEA block via ATRP yielded the desired PS‐b‐(PBPS‐g‐PMMA) or PS‐b‐(PBPEA‐g‐PMMA). ¹H nuclear magnetic resonance spectroscopy and gel permeation chromatography data indicated the target CCBCPs were successfully synthesized. Preliminary investigation on selected CCBCPs suggests that they can form ordered nanostructures via microphase separation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2971–2983     

柱状相聚苯乙烯-b-聚乳酸的合成及引导组装

设计并合成了2种柱状相结构的聚苯乙烯-b-聚乳酸(PS-b-PLA)两嵌段共聚物,并表征了它们在化学图案上的引导自组装行为。在辛酸亚锡(Sn(Oct)_2)催化下,采用羟基官能化的聚苯乙烯(PS-OH)大分子引发剂分别引发外消旋丙交酯(rac-LA)和左旋丙交酯(L-LA)开环聚合,制备了两个相对分子质量相近但构型不同的PS-b-PLA:PS-b-PDLLA和PS-b-PLLA。通过核磁共振波谱仪(NMR)、凝胶渗透色谱仪(GPC)、示差扫描量热仪(DSC)、热重分析仪(TGA)、小角X射线衍射仪(SAXS)等测试手段对两个嵌段共聚物的性质进行了表征。然后,将PS-b-PDLLA和PS-b-PLLA薄膜在六方点阵化学图案模板上加热引导自组装,得到长程有序排列的六方柱状相结构。相对于柱状相的PS-b-PLLA,柱状相的PS-b-PDLLA具有较大的拉伸比例,可以在更大的周期范围内组装出规整的六方结构。这一结果与层状相PS-b-PDLLA和PS-b-PLLA薄膜在线性化学图案上组装的结果相似。     

Synthesis of Comblike Poly（methyl methacrylate） by Atom Transfer Radical Polymerization with Poly（ethyl 2-bromoacrylate） as Macroinitiator

Comblike poly(methyl methacrylate) was synthesized by atom transfer radical polymerization of methyl methacrylate with poly(ethyl 2-bromoacrylate) as a macroinitiator, which was prepared by conventional free radical polymerization of ethyl 2-bromoacrylate. The obtained comblike polymers were characterized by GPC and ^1H NMR.     

Facile Synthesis of Multicompartment Micelles Based on Biocompatible Poly(3‐hydroxyalkanoate)

In this paper, a straightforward method to produce poly(3‐hydroxyalkanoate)‐based multicompartment micelles (MCMs) is presented. Thiol‐ene addition is used to graft sequentially perfluorooctyl chains and poly(ethylene glycol) oligomers onto poly(3‐hydroxyoctanoate‐co‐hydroxyundecenoate) oligomers backbone. Well‐defined copolymers are obtained as shown by ¹H NMR and size‐exclusion chromatography. After nanoprecipitation in water, novel PHA‐based MCMs are evidenced by cryo‐transmission electron microscopy. Moreover, the cytocompatibility of MCMs is demonstrated in vitro via cell viability assay.     

Synthesis of Poly(methyl methacrylate) Labeled with Fluorescein Moieties via Atom Transfer Radical Polymerization

Fluorescein chromophore‐labeled poly(methyl methacrylate) (PMMA) was prepared via atom transfer radical polymerization (ATRP) with two novel bromine‐containing fluorescein derivatives, 3,6‐bi(2′‐bromo‐2′‐methyl‐propionic acid) fluorescein ester (Fla‐Br) and 3‐(2′‐bromo‐2′‐methyl‐propionic acid) fluorescein ester (Flb‐Br), as the functional initiators, and CuBr/PMDETA as the catalyst, respectively. The above mentioned fluorescein containing bromine were synthesized in our lab. The ATRP of PMMA was proved in a controlled fashion. The resultant PMMA with narrow molecular weight distribution was endowed with the fluorescein chromophore incorporated into the polymer backbone. The presence of the fluorescein labeling of the polymers was confirmed by ¹H‐NMR and GPC trace under UV detector. The UV spectroscopy and fluorescence measurements of the resultant polymer gave further evidence of the functionality of the fluorescein labeling.