Experimental evidence supporting a CuIII intermediate in cross-coupling reactions of allylic esters with diallylcuprate species

The reaction between an allylic ester and a magnesium diallylcuprate, or an allylic Grignard reagent in combination with a catalytic amount of a copper salt, has been studied. These reactions yield a mixture of homo- and cross-coupled 1,5-diene products. The product ratios obtained are close to those expected for a reaction proceeding via a triallylcopper(III) intermediate consisting of three equivalent allyl groups bound to copper. When the reaction is performed with a stoichiometric amount of a preformed diallylcuprate, a homo-coupling/cross-coupling ratio larger than that predicted for a CuIII intermediate is observed. However, on dilution this ratio decreases and becomes close to the predicted ratio. The deviation from the predicted homo-coupling/cross-coupling ratio was accounted for by an olefin-induced homo-coupling, as demonstrated in control experiments. The possibility of the allylic ligands to coordinate to the metal center in a eta3 or eta1 fashion provides an opportunity for the stabilization of the intermediate CuIII species.     

The nature of the monomer insertion step in the allylnickel(II)-catalyzed 1,4-polymerization of 1,3-butadiene: sigma-allyl-insertion mechanism versus pi-allyl-insertion mechanism

We present a theoretical investigation on the nature of the monomer insertion step in the allylnickel(II)-catalyzed 1,4-polymerization of 1,3-butadiene that employed a gradient-corrected DFT method. We have explored critical elementary steps of the whole polymerization cycle for the trans-1,4 regulating cationic allylnickel(II) [RC3H4NiII(C4H6)L]+ catalyst. These steps are i) cis-butadiene insertion into either the eta 1-sigma-butenyl-NiII bond (sigma-allyl insertion mechanism) or the eta 3-pi-butenyl-NiII bond (pi-allyl insertion mechanism) along with competing pathways for generation of trans-1,4 and cis-1,4 polymer units, and ii) anti-syn isomerization. Based on the analysis of geometric and electronic structures of key species involved and the energetics, we present a detailed insight into the different nature of the monomer insertion step according to the two mechanistic alternatives. An understanding of why the pi-allyl insertion mechanism is favored over the sigma-allyl insertion mechanism is provided. eta 1-sigma-butenyl-NiII Species are predicted to be sparsely populated and also distinctly less reactive than eta 3-pi-butenyl-NiII species. Although they are commonly believed to be reactive intermediates, eta 1-sigma-butenyl-NiII species are, therefore, not likely to be involved along viable pathways for cis-butadiene insertion into the butenyl-NiII bond. The present investigation corroborates our previous conclusion that the pi-allyl insertion mechanism represents the preferred mechanism for the monomer insertion step in the allylnickel(II)-catalyzed 1,4-polymerization of 1,3-butadiene. On the other hand, the suggested alternative sigma-allyl insertion mechanism has to be considered to be not operative, for both thermodynamic and kinetic reasons. Furthermore, the sigma-allyl insertion mechanism would neither provide a rationalization of cis-trans selectivity nor of chemoselectivity in the allylnickel(II)-catalyzed 1,4-polymerization of 1,3-butadiene.     

Stable, chloride-induced monohapto-bonding mode for an allyl ligand in a Pd(II) complex bearing a new bidentate phosphonite-oxazoline ligand

Bidentate ligands can lead to stable eta(1)-allyl complexes of Pd(II). A novel chelating phosphonite-oxazoline P,N ligand, abbreviated NOPO(Me2), has been prepared by reaction of 6-chloro-6H-dibenz[c,e][1,2]oxaphosphorin with the lithium alcoholate derived from 4,4-dimethyl-2-(1-hydroxy-1-methylethyl)-4,5-dihydrooxazole. Its reaction with [Pd(eta(3)-C(3)H(5))(micro-Cl)](2) afforded the new eta(1)-allyl Pd complex [PdCl(eta(1)-C(3)H(5))(NOPO(Me2))] 2 in 91% yield. This constitutes a still rare example of structurally characterized eta(1)-allyl Pd(II) complex. Chloride abstraction led to the corresponding cationic eta(3)-allyl complex [Pd(eta(3)-C(3)H(5))(NOPO(Me2))]PF(6) 3, which has also been characterized by X-ray diffraction. CO insertion into the Pd-C sigma-bond of the eta(1)-allyl ligand of 2 afforded the corresponding 3-butenoyl palladium complex [PdCl[C(O)C(3)H(5)](NOPO(Me2))] 4 under mild conditions, which supports the view that CO insertion into eta(3)-allyl palladium cationic complexes occurs via first coordination of the counterion to form a more reactive eta(1)-allyl intermediate.     

Thermodynamic and kinetic control in selective ligand transfer in conjugate addition of mixed organocuprate Me(X)CuLi

Since the proposal of the dummy ligand concept by Corey, it has been widely accepted that the ligand transfer selectivity of a mixed organocuprate (Me(X)CuLi) depends on the Cu-X bond strength. The present B3LYP density functional studies on the Me(2)(X)Cu(III).OMe(2), pi-allyl Cu(III), and Me(X)Cu(III)LiCl.LiCl reacting with acrolein showed that the ligand transfer selectivity of the conjugate addition depends on two factors, thermodynamic stability (X = tert-butyl, ethynyl, cyano, and thiomethyl groups) and kinetic reactivity ((trimethylsilyl)methyl and vinyl groups) of the Cu(III) intermediate formed by complexation of the cuprate and the alpha,beta-unsaturated carbonyl compound. For the typical dummy ligands (X = alkynyl, cyano, and heteroatom ligands), the trans effect and the strong Li-X affinity are the reasons why these ligands stay on the copper atom. In contrast, for the (trimethylsilyl)methyl and vinyl groups, the selectivity depends on the kinetics of reductive elimination of the Cu(III) intermediate. The (trimethylsilyl)methyl transfer is retarded by repulsive four-electron interaction between the lone pair Cu 3d(xy)() orbital and the C-Si sigma-orbital.     

Palladium-catalyzed coupling of allylboronic acids with iodobenzenes. Selective formation of the branched allylic product in the absence of directing groups

Palladium-catalyzed coupling reactions of functionalized allylboronic acids with iodobenzenes were achieved under standard Suzuki-Miyaura coupling conditions. The coupling reactions afforded selectively the branched allylic products in high to excellent yields. In contrast to palladium-catalyzed nucleophilic substitution reactions proceeding via (eta3-allyl)palladium intermediates, this process does not require directing groups in the allyl moiety to achieve substitution at the congested allylic terminus. The regioselectivity of the process was largely unaffected by the substituent effects of the iodobenzenes and the allylic substrates.     

Origin of the regio- and stereoselectivity in palladium-catalyzed electrophilic substitution via bis(allyl)palladium complexes

Palladium-catalyzed allylic substitution of aryl allyl chlorides with aromatic and heteroaromatic aldehydes was performed in the presence of hexamethylditin. This procedure involves palladium-catalyzed formation of transient allylstannanes followed by generation of a bis(allyl)palladium intermediate, which subsequently reacts with the aldehyde electrophile. The catalytic substitution reaction proceeds with high regio- and stereoselectivity. The stereoselectivity is affected by the steric and electronic properties of the allylic substituents. Various functionalities including NO(2), COCH(3), Br, and F groups are tolerated under the applied catalytic conditions. Density functional calculations at the B3PW91/DZ+P level of theory were applied to study the steric and electronic effects controlling the regio- and stereoselectivity of the electrophilic addition. The development of the selectivity was studied by modeling the various bis(allyl)palladium species occurring in the palladium-catalyzed substitution of cinnamyl chloride with benzaldehyde. It was found that the electrophilic attack proceeds via a six-membered cyclic transition state, which has a pronounced chair conformation. The regioselectivity of the reaction is controlled by the location of the phenyl group on the eta(1)-allyl moiety of the complex. The stereoselectivity of the addition process is determined by the relative configuration of the phenyl substituents across the developing carbon-carbon bond. The lowest energy path corresponds to the formation of the branched allylic isomer with the phenyl groups in anti configuration, which is in excellent agreement with the experimental findings.     

Palladium-catalyzed synthesis of 2,3-dihydro-2-ylidene-1,4-benzodioxins

Palladium-catalyzed condensation of benzene-1,2-diol with various propargylic carbonates afforded regio- and stereoselectively 2,3-dihydro-2-ylidene-1,4-benzodioxins. The reaction is suggested to proceed by the formation of a (sigma-allenyl)palladium complex, followed by the intermolecular attack of the phenoxide ion on this complex to generate a new (sigma-allyl)palladium complex in equilibrium with the corresponding (eta(3)-allyl)palladium complex. Intramolecular attack of the phenoxide ion afforded the corresponding benzodioxan compound. This last attack occurs predominantly at the more electrophilic end of the (eta(3)-allyl)palladium intermediate. The Z- or E-stereochemistry of the products was established by (1)H NMR and proton NOE measurements and also by X-ray analysis on an example. The Z-stereochemistry generally observed is in agreement with the formation of this (eta(3)-allyl)palladium intermediate. However, in the case of tertiary propargylic carbonates, the E-stereochemistry generally observed could be explained by an intramolecular attack of the phenoxide ion on the intermediate (sigma-allyl)palladium complex, in slow equilibrium with the (eta(3)-allyl)palladium complex.     

Rate and mechanism of the reversible formation of cationic (eta3-allyl)-palladium complexes in the oxidative addition of allylic acetate to palladium(0) complexes ligated by diphosphanes

The oxidative addition of the allylic acetate, CH2=CH-CH2-OAc, to the palladium(o) complex [Pd0(P,P)], generated from the reaction of [Pd(dba)2, with one equivalent of P,P (P,P = dppb = 1,4-bis(diphenylphosphanyl)butane, and P,P = dppf = 1,1'-bis(diphenylphosphanyl)ferrocene), gives a cationic (eta3-allyl)palladium(II) complex, [(eta3-C3H5)Pd(P,P)+]. with AcO as the counter anion. This reaction is reversible and proceeds through two successive equilibria. The overall equilibrium constants have been determined in DMF. Compared with PPh3, the overall equilibrium lies more in favor of the cationic (eta3-allyl)palladium(II) complex when bidentate P,P ligands are considered in the order: dppb > dppf > PPh3. The reaction proceeds via a neutral intermediate complex [(eta2-CH=CH-CHCH2-OAc)Pd0(P,P)], which has been kinetically detected. The rate constants of the successive steps have been determined in DMF by UV spectroscopy and conductivity measurements. The overall complexation step of the Pd0 by the allylic acetate C=C bond is faster than the oxidative addition/ionization step which gives the cationic (eta3-allyl)palladium(II) complex.     

Modular bis(oxazoline) ligands for palladium catalyzed allylic alkylation: unprecedented conformational behaviour of a bis(oxazoline) palladium eta3-1,3-diphenylallyl complex

New families of enantiopure bis(oxazolines) with 4,5-trans (5 a-g) or 4,5-cis (6 c) stereochemistry at the individual rings have been prepared in high yield. Their eta(3)-allyl palladium complexes (8 a-g, 9 c and 10) have been used as catalytic precursors in allylic alkylation reactions with excellent enantioselectivities (up to 96 %) for the trans oxazoline derivatives, while Pd/6 c system was inactive. NMR studies on palladium eta(3)-1,3-diphenylallyl intermediates (11 a, c and e) showed the presence of syn/syn- and syn/anti-allyl isomers in solution; this resembles the first example of eta(3)-eta(1)-eta(3) isomerism in Pd allylic complexes containing bis(oxazolines) derived from malonic acid.     

Enantioselective iridium-catalyzed carbonyl allylation from the alcohol or aldehyde oxidation level via transfer hydrogenative coupling of allyl acetate: departure from chirally modified allyl metal reagents in carbonyl addition

Under the conditions of transfer hydrogenation employing an iridium catalyst generated in situ from [Ir(cod)Cl]2, chiral phosphine ligand (R)-BINAP or (R)-Cl,MeO-BIPHEP, and m-nitrobenzoic acid, allyl acetate couples to allylic alcohols 1a-c, aliphatic alcohols 1d-l, and benzylic alcohols 1m-u to furnish products of carbonyl allylation 3a-u with exceptional levels of asymmetric induction. The very same set of optically enriched carbonyl allylation products 3a-u are accessible from enals 2a-c, aliphatic aldehydes 2d-l, and aryl aldehydes 2m-u, using iridium catalysts ligated by (-)-TMBTP or (R)-Cl,MeO-BIPHEP under identical conditions, but employing isopropanol as a hydrogen donor. A catalytically active cyclometallated complex V, which arises upon ortho-C-H insertion of iridium onto m-nitrobenzoic acid, was characterized by single-crystal X-ray diffraction. The results of isotopic labeling are consistent with intervention of symmetric iridium pi-allyl intermediates or rapid interconversion of sigma-allyl haptomers through the agency of a symmetric pi-allyl. Competition experiments demonstrate rapid and reversible hydrogenation-dehydrogenation of the carbonyl partner in advance of C-C coupling. However, the coupling products, which are homoallylic alcohols, experience very little erosion of optical purity by way of redox equilibration under the coupling conditions, although isopropanol, a secondary alcohol, may serve as terminal reductant. A plausible catalytic mechanism accounting for these observations is proposed, along with a stereochemical model that accounts for the observed sense of absolute stereoinduction. This protocol for asymmetric carbonyl allylation transcends the barriers imposed by oxidation level and the use of preformed allyl metal reagents.     

Mechanism and regioselectivity of reductive elimination of pi-allylcopper (III) intermediates

Reductive elimination of a pi-allylcopper(III) compound leading to the formation of a C-C bond on an allylic terminal has been considered to occur via the corresponding sigma-allylcopper(III) species. The present B3LYP density functional study has shown however that the C-C bond formation occurs directly from the pi-allyl complex via an enyl[sigma+pi]-type transition state, which has structural features different from a simple sigma-allylcopper(III) intermediate. In the case of unsymmetrically substituted pi-allylcopper(III) compound that has a partial sigma-allylcopper(III) structure, the reductive elimination occurs preferentially at the sigma-bonded allylic terminal since, in this way, the copper atom can recover most effectively its d-electrons shared with the allyl system. The regioselectivity of the reductive elimination of a substituted pi-allylcopper(III) intermediate is mainly controlled by the electronic effect, and correlated well to the Hammett sigma(p)(+) constant. The analyses revealed mechanistic kinship between the allylic substitution and the conjugate addition reaction of organocopper reagents.     

Solid-phase synthesis of （Z）-allyl iodides from 3-acetoxy-2-methylene-alkanoates with recyclable polymer-supported selenium bromide

Reaction of polystyrene-supported lithium selenide with 3-acetoxy-2-methylene-alkanoates afforded the corresponding allyl selenide resins and subsequent cleavage from the polymer by treating with methyl iodide to furnish(Z)-allyl iodides in good yields and high purities.The polymeric selenium reagent can be regenerated and reused.So it is a environmentally benign reagent.     

Unusual reactivity of a sterically hindered diphosphazane ligand, EtN{P(OR)(2)}(2), (R = C(6)H(3)(Pr(I))(2)-2,6) towards (eta(3)-allyl)palladium precursors

The reactivity of (eta(3)-allyl)palladium chloro dimers [(1-R-eta(3)-C(3)H(4))PdCl](2) (R = H or Me) towards a sterically hindered diphosphazane ligand [EtN{P(OR)(2)}(2)] (R = C(6)H(3)(Pr(i))(2)-2,6), has been investigated under different reaction conditions. When the reaction is carried out using NH(4)PF(6) as the halide scavenger, the cationic complex [(1-R-eta(3)-C(3)H(4))Pd{EtN(P(OR)(2))(2)}]PF(6) (R = H or Me) is formed as the sole product. In the absence of NH(4)PF(6), the initially formed cationic complex, [(eta(3)-C(3)H(5))Pd{EtN(P(OR)(2))(2)}]Cl, is transformed into a mixture of chloro bridged complexes over a period of 4 days. The dinuclear complexes, [(eta(3)-C(3)H(5))Pd(2)(mu-Cl)(2){P(O)(OR)(2)}{P(OR)(2)(NHEt)}] and [Pd(mu-Cl){P(O)(OR)(2)}{P(OR)(2)(NHEt)}](2) are formed by P-N bond hydrolysis, whereas the octa-palladium complex [(eta(3)-C(3)H(5))(2-Cl-eta(3)-C(3)H(4))Pd(4)(mu-Cl)(4)(mu-EtN{P(OR)(2)}(2))](2), is formed as a result of nucleophilic substitution by a chloride ligand at the central carbon of an allyl fragment. The reaction of [EtN{P(OR)(2)}(2)] with [(eta(3)-C(3)H(5))PdCl](2) in the presence of K(2)CO(3) yields a stable dinuclear (eta(3)-allyl)palladium(I) diphosphazane complex, [(eta(3)-C(3)H(5))[mu-EtN{P(OR)(2)}(2)Pd(2)Cl] which contains a coordinatively unsaturated T-shaped palladium center. This complex exhibits high catalytic activity and high TON's in the catalytic hydrophenylation of norbornene.     

New [Mo(eta3-allyl)(CO)2L3]+ complexes with monodentate or tridentate nitrogen-donor ligands

Cationic complexes [Mo(eta(3)-allyl)(CO)2L3]+ (L3 = either nitrogen-donor tridentate ligand or three monodentate ligands) were prepared in high yield and under mild conditions using as precursors either the triflato complex [Mo(eta(3)-allyl)(OTf)(CO)2(NCMe)2] or the combination of the chloro complex [Mo(eta(3)-allyl)Cl(CO)2(NCMe)2] and the salt NaBAr'(4)(Ar'= 3,5-bis(trifluoromethyl)phenyl). The tridentate ligands employed were 2,2':6',2'-terpyridine (terpy) and cis,cis-1,3,5-cyclohexanetriamine (CHTA), whereas the monodentate ligands imidazole (im) and 3,5-dimethylpyrazole (dmpz) were chosen. In order to stabilize the labile intermediates, an excess of acetonitrile was used in most of the syntheses. However, the pyrazole complex was prepared through a nitrile-free route to avoid reactions at the coordinated nitrile. The solid state structures of [Mo(eta(3)-methallyl)(CO)2(terpy)]OTf (2), [Mo(eta(3)-methallyl)(CO)2(CHTA)]BAr'4 (3), [Mo(eta(3)-methallyl)(CO)2(NCMe)3]BAr'4 (4), [Mo(eta(3)-allyl)(CO)2(im)3]OTf (5) and [Mo(eta(3)-allyl)(CO)2(dmpz)3]BAr'4 (6) were determined by means of single-crystal X-ray diffraction.     

DFT studies on the mechanism of allylative dearomatization catalyzed by palladium

The reaction mechanism of the Pd-catalyzed benzyl/allyl coupling of benzyl chloride with allyltributylstannan, resulting in the dearomatization of the benzyl group, was studied using density functional theory calculations at the B3LYP level. The calculations indicate that the intermediate (eta(3)-benzyl)(eta(1)-allyl)Pd(PH(3)) is responsible for the formation of the kinetically favored dearomatic product. Reductive elimination of the dearomatic product from the intermediate occurs by coupling the C-3 terminus of the eta(1)-allyl ligand and the para-carbon of the eta(3)-benzyl ligand in (eta(3)-benzyl)(eta(1)-allyl)Pd(PH(3)). For comparison, various C-C coupling reaction pathways have also been examined.     

Origin of the regio- and stereoselectivity of allylic substitution of organocopper reagents

The origin of the contrasting regioselectivities in allylic substitution found for a heterocuprate MeCu(CN)Li and a homocuprate Me2CuLi was studied using density functional calculations. The gamma-selectivity of MeCu(CN)Li is determined at the oxidative addition stage of the reaction, where the different degree of trans effect of the Me and the CN groups dictates the relative orientation of the methyl group and the leaving acetate group. As the result, the transition state where the acetate group leaves trans to the Me group on the copper atom is favored, and the gamma-selectivity results. The homocuprate Me2CuLi is symmetrical by nature and does not show such regioselectivity.     

Self-adaptable catalysts: substrate-dependent ligand configuration

Pd(II) allyl and Pd(0) olefin complexes containing the configurationally labile ligand 1,2-bis-[4,5-dihydro-3H-dibenzo[c-e]azepino]ethane were studied as models for intermediates in Pd-catalyzed allylic alkylations. According to NMR and DFT studies, the ligand prefers C(s) conformation in both eta3-1,3-diphenylpropenyl and eta3-cyclohexenyl Pd(II) complexes, whereas in Pd(0) olefin complexes it adopts different conformations in complexes derived from the two types of allyl systems in both solution and, as verified by X-ray crystallography, in the solid state. These results demonstrate that the Pd complex is capable of adapting its structure to the reacting substrate. The different structural preferences also provide an explanation for the behavior of 1,3-diphenyl-2-propenyl acetate and 2-cyclohexenyl acetate in Pd-catalyzed allylic alkylations using pseudo-C2 and pseudo-C(s) symmetric ligands.     

On the nature of the intermediates and the role of chloride ions in Pd-catalyzed allylic alkylations: added insight from density functional theory

The reactivity of intermediates in palladium-catalyzed allylic alkylation was investigated using DFT (B3LYP) calculations including a PB-SCRF solvation model. In the presence of both phosphine and chloride ligands, the allyl intermediate is in equilibrium between a cationic eta(3)-allylPd complex with two phosphine ligands, the corresponding neutral complex with one phosphine and one chloride ligand, and a neutral eta(1)-allylPd complex with one chloride and two phosphine ligands. The eta(1)-complex is unreactive toward nucleophiles. The cationic eta(3)-complex is the intermediate most frequently invoked in the title reaction, but in the presence of halides, the neutral, unsymmetrically substituted eta(3)-complex will be formed rapidly from anionic Pd(0) complexes in solution. Since the latter will prefer both leaving group ionization and reaction with nucleophiles in the position trans to phosphorus, it can rationalize the observed "memory effect" (a regioretention) in the title reaction, even in the absence of chiral ligands.     

Me(2)CuLi*LiCN in diethyl ether prefers a homodimeric core structure [Me(2)CuLi](2) and not a heterodimeric one [Me(2)CuLi*LiCN]: (1)H, (6)Li HOE and (1)H, (1)H NOE studies by NMR

H-Li distances and (1)H-(1)H dipolar interactions in Me(2)CuLiLiCN and Me(2)CuLi in diethyl ether (Et(2)O), obtained by NMR spectroscopy, were used to gain structural information about the contact ion pair of the salt-containing organocuprate Me(2)CuLiLiCN in this solvent. The H-Li distances of Me(2)CuLiLiCN and Me(2)CuLi in Et(2)O, resulting from the initial buildup rates in conjunction with the motional correlation times, are almost identical, indicating a similar homodimeric core structure [Me(2)CuLi](2) for both samples. However, the H-Li distances obtained for Me(2)CuLiLiCN do not rigorously exclude a heterodimeric structure [Me(2)CuLiLiCN] as proposed by ab initio calculations. Therefore, (1)H-(1)H dipolar interactions were investigated by SYM-BREAK-NOE/ROE-HSQC experiments, which allow for the observation of NOEs between equivalent protons. Since these experiments showed similar (1)H-(1)H dipolar interactions of Me(2)CuLiLiCN and Me(2)CuLi, we propose that for Me(2)CuLiLiCN a homodimeric core structure [Me(2)CuLi](2) indeed is predominant in Et(2)O.