Trans‐A2B‐corroles Bearing a Coumarin Moiety ‐ From Synthesis to Photophysics

Four dyads comprised of corrole and coumarin units have been synthesised. Three coumarincarboxaldehydes were synthesized and transformed into the corresponding trans‐A₂B‐corroles by reaction with 5‐(pentafluorophenyl)dipyrromethane. It has been proven that this type of direct condensation can lead to the corresponding corroles in moderate yields. The reaction of hydroxybenzaldehydes with vinylphosphonium salts has been identified as the most general method for the preparation of formyl‐coumarins with various patterns of substituents. The dyad consisting of ketobiscoumarin and corrole was synthesized by Sonogashira coupling. Spectroscopic and photophysical investigations revealed that there is an efficient energy transfer from the coumarin moiety to corrole in all four dyads. Energy transfer can be clearly ascribed to a dipole–dipole mechanism (Förster) for all dyads that contain luminescent coumarins and to an electron exchange mechanism (Dexter) for the dyad with the non‐luminescent one. In the case of the dyad that bears coumarin with a hydroxy group at position 5, an electron‐transfer was detected from corrole to coumarin. The latter process is possible because of the suitably low reduction potential of coumarins of this type.     

吩噻嗪-Corrole 镓(III)配合物的合成、荧光及其光断裂DNA性质

合成了吩噻嗪(PTZ)-corrole二元体1-3及其镓(III)配合物4-6.采用稳态吸收与稳态发射及时间分辨的瞬态光谱技术研究了这几种化合物的光物理特性.结合荧光量子产率和荧光寿命计算得到它们的辐射和无辐射速率常数.稳态吸收光谱表明:几种二元体中,corrole镓(III)单元表现出更强的Soret带和Q带.化合物1-3的荧光量子产率分别是0.156、0.134和0.139,辐射速率常数分别为4.02′107、3.47′107和2.89′107s-1.化合物4-6的荧光量子产率分别是0.502、0.443和0.494,辐射速率常数分别为20.90′107、16.78′107和21.11′107s-1.可见,化合物4-6的荧光量子产率和辐射速率常数均高于化合物1-3.然而,化合物4-6的荧光寿命分别是2.40、2.64和2.34ns,低于自由corrole1-3.琼脂糖凝胶电泳实验表明:在光照的条件下,这些吩噻嗪-corrole镓(III)二元体化合物能够把超螺旋DNA(formI)切割成缺刻型DNA(formII).     

Electrochemistry and spectroelectrochemistry of bismanganese porphyrin-corrole dyads

A series of homobimetallic manganese cofacial porphyrin-corrole dyads were synthesized and investigated as to their electrochemistry, spectroelectrochemistry, and ligand binding properties in nonaqueous media. Four dyads were investigated, each of which contained a Mn(III) corrole linked in a face-to-face arrangement with a Mn(III) porphyrin. The main difference between compounds in the series is the type of spacer, 9,9-dimethylxanthene, anthracene, dibenzofuran, or diphenylether, which determines the distance and interaction between the metallomacrocycles. Each redox process of the porphyrin-corrole dyads was assigned on the basis of spectroscopic and electrochemical data and by comparison with reactions and properties of the monocorrole and the monoporphyrin which were examined under the same solution conditions. The Mn(III) porphyrin part of the dyad undergoes two major one-electron reductions in pyridine and benzonitrile, the first of which involves a Mn(III)/Mn(II) process and the second the addition of an electron to the conjugated π-ring system of the macrocycle. The Mn(III) corrole part of the dyads also exhibits two major redox processes, one involving Mn(III)/Mn(II) and the other Mn(III) to Mn(IV) under the same solution conditions. The potentials and reversibility of each electron transfer reaction were shown to depend upon the solvent, type of spacer separating the two macrocycles, and the presence or absence of axial ligation, the latter of which was investigated in detail for the case of acetate ion which was found to bind within the cavity of the dyad to both manganese centers, both before and after the stepwise electroreduction to the Mn(II) forms of the two macrocycles. An intramolecular chloride ion exchange between the porphyrin part of the dyads which contain Mn(III)Cl and the singly oxidized corrole in the dyad is observed after the Mn(III)/Mn(IV) reaction of the corrole, suggesting that chloride is coordinated inside the cavity in the neutral compound.     

Electrochemistry, spectroelectrochemistry, chloride binding, and O2 catalytic reactions of free-base porphyrin-cobalt corrole dyads

Three face-to-face linked porphyrin-corrole dyads were investigated as to their electrochemistry, spectroelectrochemistry, and chloride-binding properties in dichloromethane or benzonitrile. The same three compounds were also investigated as to their ability to catalyze the electroreduction of dioxygen in aqueous 1 M HClO4 or HCl when adsorbed on a graphite electrode. The characterized compounds are represented as (PCY)H2Co, where P = a porphyrin dianion; C = a corrole trianion; and Y = a biphenylenyl, 9,9-dimethylxanthenyl, or anthracenyl spacer, which links the two macrocycles in a face-to-face arrangement. An axial binding of one or two Cl- ligands to the cobalt center of the corrole is observed for singly and doubly oxidized (PCY)H2Co, with the exact stoichiometry of the reaction depending upon the spacer size and the concentration of Cl- added to solution. No Cl- binding occurs for the neutral or reduced forms of the dyad, which contrasts with what is seen for the monocorrole, (Me4Ph5Cor)Co, where a single Cl- ligand is added to the Co(III) corrole in PhCN. The Co(III) form of the corrole in (PCY)H2Co also appears to be the catalytically active species in the electroreduction of dioxygen, which occurs at potentials associated with the Co(IV)/Co(III) reaction, that is, 0.35 V in 1 M HClO4 as compared to 0.31-0.42 V for the same three dyads in PhCN and 0.1 M TBAP. The potential for the catalytic electroreduction of O2 in HCl shifts negatively by 60 to 70 mV as compared to E(1/2) values in 1 M HClO4, consistent with the binding of Cl- to the Co(IV) form of the corrole and its rapid dissociation after electroreduction to Co(III) at the electrode surface.     

Corrole-fullerene dyads: formation of long-lived charge-separated states in nonpolar solvents

The first example of covalently linked free-base corrole-fullerene dyads is reported. In the newly synthesized dyads, the free-energy calculations performed by employing the redox and singlet excited-state energy in both polar and nonpolar solvents suggested the possibility of electron transfer from the excited singlet state of corrole to the fullerene entity. Accordingly, steady-state and time-resolved emission studies revealed efficient fluorescence quenching of the corrole entity in the dyads. Further studies involving femtosecond laser flash photolysis and nanosecond transient absorption studies confirmed electron transfer to be the quenching mechanism, in which the electron-transfer product, the fullerene anion radical, was able to be spectrally characterized. The rate of charge separation, kCS, was found to be on the order of 10(10)-10(11) s(-1), suggesting an efficient photoinduced electron-transfer process. Interestingly, the rate of charge recombination, kCR, was slower by 5 orders of magnitude in nonpolar solvents, cyclohexane and toluene, resulting in a radical ion-pair lasting for several microseconds. Careful analysis of the kinetic and thermodynamic data using the Marcus approach revealed that this novel feature is due to appropriately positioning the energy level of the charge-separated state below the triplet states of either of the donor and acceptor entities in both polar and nonpolar solvents, a feature that was not evident in donor-acceptor dyads constructed using symmetric tetrapyrroles as electron donors.     

Ethynyl-bridged porphyrin-corrole dyads and triads: Synthesis,properties and DFT calculations

Ethynyl-bridged porphyrin-corrole dyads and triads were synthesized by using Pd(0) mediated coupling reactions and their structures were characterized by NMR, FT-IR, UV/Vis and fluorescence techniques. Besides spectroscopic techniques, computational studies at B3LYP/6-311G(d,p) level of DFT were also used to elucidate the minimum energy geometries and the molecular orbital characteristics of the new dyads and triads. DFT calculations pointed out the presence of charge separated donor-acceptor property between macrocycles of dyads and triads, and the emission studies indicated an excited state interaction between macrocycles, and energy transfer from the porphyrin to the corrole unit.     

Improving the Photoinduced Charge Separation Parameters in Corrole–Perylene Carboximide Dyads by Tuning the Redox and Spectroscopic Properties of the Components

A couple of corrole–perylene carboximide dyads ( C2‐PIa and C2‐PIx ) have been synthesized and their photoreactivity has been evaluated. We aimed at obtaining better performances for photoinduced charge separation, both in terms of efficiency and in terms of lifetime, with respect to formerly studied systems. The energy level of the charge‐separated state was tuned by selecting perylene and corrole components with diverse redox and spectroscopic properties. High spectroscopic energy levels of the perylene carboximide derivatives (PIs) allow a fast charge separation to be maintained in competition with an energy‐transfer process from the PI to the corrole unit. Yields and lifetimes of charge separation in toluene are, respectively, 75 % and 2.5 μs for C2‐PIa and 65 % and 24 ns for C2‐PIx . The results and the effect of solvent polarity are discussed in the framework of current energy‐ and electron‐transfer theories.     

New and efficient arrays for photoinduced charge separation based on perylene bisimide and corroles

The bichromophoric systems C2-PI, C3-PI, and C3-PPI consisting of corrole and perylene bisimide units and representing one of the rare cases of elaborate structures based on corrole, have been synthesized. Corroles C2 and C3 are, respectively, meso-substituted corroles with 2,6-dichlorophenyl and pentafluorophenyl substituents at the 5 and 15 positions. The three dyads were prepared by divergent strategy with the corrole-forming reaction as the last step of the sequence. C2-PI and C3-PI differ in the nature of the corroles, whereas C3-PI differs from C3-PPI in the presence of a further phenyl unit in the linker between photoactive units. The dyads display spectroscopic properties which are the superposition of the component spectra, indicating a very weak electronic coupling. Excitation of the corrole unit leads to charge separation with a rate which decreases from 2.4 x 10(10), to 5.0 x 10(9), and to 4.9 x 10(7) s(-1) for C2-PI, C3-PI, and C3-PPI, respectively, where the reaction is characterized by a delta G degrees >0. Excitation of the perylene bisimide unit is followed by competing reactions of: 1) energy transfer to the corrole unit, which subsequently deactivates to the charge-separated state and; 2) electron transfer to directly form the charge-separated state. The ratio of electron-to-energy-transfer rates is 9:1 and 1:1 for C3-PI and C3-PPI, respectively. The yield of charge separation is essentially 100 % for C2-PI and C3-PI, and approximately 50 % (excitation of peryleneimide) or 15 % (excitation of the corrole) for C3-PPI. The lifetime of the charge-separated state, observed for the first time in corrole-based structures, is 540 ps for C2-PI, 2.5 ns for C3-PI, and 24 ns for C3-PPI, respectively. This is in agreement with an inverted behavior, according to Marcus theory.     

Alkyl- and aryl-substituted corroles. 5. Synthesis, physicochemical properties, and X-ray structural characterization of copper biscorroles and porphyrin-corrole dyads

The synthesis and characterization of cofacial copper biscorroles and porphyrin-corroles linked by a biphenylenyl or anthracenyl spacer are described. The investigated compounds are represented as (BCA)Cu(2) and (BCB)Cu(2) in the case of the biscorrole (BC) derivatives and (PCA)Cu(2) and (PCB)Cu(2) in the case of porphyrin (P)-corrole (C) dyads, where A and B represent the anthracenyl and biphenylenyl bridges, respectively. A related monomeric corrole (Me(4)Ph(5)Cor)Cu and monomeric porphyrin (Me(2)Et(6)PhP)Cu that comprise the two halves of the porphyrin-corrole dyads were also studied. Electron spin resonance (ESR), (1)H NMR, and magnetic measurements data demonstrate that the copper corrole macrocycle, when linked to another copper corrole or copper(II) porphyrin, can be considered to be a Cu(III) complex in equilibrium with a Cu(II) radical species, copper(III) corrole being the main oxidation state of the corrole species at all temperatures. The cofacial orientation of (BCB)Cu(2), (BCA)Cu(2), and (PCB)Cu(2) was confirmed by X-ray crystallography. Structural data: (BCB)Cu(2)(C(110)H(82)N(8)Cu(2).3CDCl(3)), triclinic, space group P, a = 10.2550(2) A, b = 16.3890(3) A, c = 29.7910(8) A, alpha = 74.792(1) degrees , beta = 81.681(1) degrees , gamma = 72.504(2) degrees , Z = 2; (BCA)Cu(2)(C(112)H(84)N(8)Cu(2).C(7)H(8).1.5H(2)O), monoclinic, space group P 2(1)/c, a = 16.0870(4) A, b = 35.109(2) A, c = 19.1390(8) A, beta = 95.183(3) degrees , Z = 4; (PCB)Cu(2)(C(89)H(71)N(8)Cu(2).CHCl(3)), monoclinic, space group P2(1)/n, a = 16.7071(3) A, b = 10.6719(2) A, c = 40.8555(8) A, beta = 100.870(1) degrees , Z = 4. The two cofacial biscorroles, (BCA)Cu(2) and (BCB)Cu(2), both show three electrooxidations under the same solution conditions. The reduction of (BCA)Cu(2) involves a reversible electron addition to each macrocycle at the same potential of E(1/2) = -0.20 V although (BCB)Cu(2) is reversibly reduced in two steps to give first [(BCB)Cu(2)](-) and then [(BCB)Cu(2)](2)(-), each of which was characterized by ESR spectroscopy as containing a Cu(II) center. These latter electrode reactions occur at E(1/2) = -0.36 and -0.51 V versus a saturated calomel reference electrode. The half-reduced and fully reduced (BCB)Cu(2) show similar Cu(II) ESR spectra, and no evidence of a triplet signal is observed. The two well-separated reductions of (BCB)Cu(2) to give [(BCB)Cu(2)](2)(-) can be attributed to a stronger pi-pi interaction between the two macrocycles of this dimer as compared to those of (BCA)Cu(2). The copper porphyrin-corrole dyads, (PCA)Cu(2) and (PCB)Cu(2), show five reversible oxidations and two reversible reductions, and these potentials are compared with corresponding values for electrochemical reactions of the porphyrin and corrole monomers under the same solution conditions.     

Synthesis of an anthracenyl bridged porphyrin–corrole bismacrocycle. Physicochemical and electrochemical characterisation of the biscobalt μ-superoxo derivative

Dicobalt or heterobimetallic cofacial bisporphyrins are up till now amongst the very few molecular electrocatalysts able to promote the direct reduction of dioxygen to water via a four-electron process in acidic medium. Numerous studies have been devoted to elucidate the key steps of this catalytic reaction and an important result has revealed an unexpected high dioxygen affinity for a mixed valence Co(II)/Co(III) cofacial porphyrin, the key intermediate complex being a μ-superoxo derivative. At the same time, the great importance assumed by ‘Pacman’ porphyrins and the recent developments in corrole chemistry have provided the stimulation to synthesise porphyrin–corrole dyads which might also transport and/or activate dioxygen. In the present paper, we report the stepwise synthesis and characterisation of a cofacial porphyrin–corrole bearing an anthracenyl bridge, (PCA)H₅ where PCA is the pentaanion of 1-(13,17-diethyl-2,3,7,8,12,18-hexamethylporphyrin–5-yl)-8-(7,8,12,13-tetramethyl-2,3,17,18-tetraphenylcorrol-10-yl) anthracene. The synthesis and characterisation of the μ-superoxo Co(III)/Co(III) complex 〚(PCA)Co₂Im₂〛(μ-O₂) is also described.     

Porphyrin dyads bearing carbon tethers for studies of high-density molecular charge storage on silicon surfaces

Redox-active molecules that afford high charge density upon attachment to an electroactive surface are of interest for use in molecular-based information-storage applications. One strategy for increasing charge density is to covalently link a second redox center to the first in an architecture that uses the vertical dimension in essentially the same molecular footprint. Toward this end, a set of four new porphyrin dyads have been prepared and characterized. Each dyad consists of two zinc porphyrins, an intervening linker (p-phenylene or 4,4'-diphenylethyne), and a surface attachment group (ethynyl or triallyl group). The porphyrin dyads were attached to an electroactive Si(100) surface and interrogated via electrochemical and FTIR techniques. The charge density obtainable for the ethynyl-functionalized porphyrin dyads is approximately double that observed for an analogously functionalized monomer, whereas that for the triallyl-functionalized dyads is at most 40% larger. These results indicate that the molecular footprint of the former dyads is similar to that of a monomer while that of the latter dyads is larger. For both the ethynyl- and triallyl-functionalized porphyrin dyads, higher charge densities (smaller molecular footprints) are obtained for the molecules containing the 4,4'-diphenylethyne versus the p-phenylene linker. This feature is attributed to the enhanced torsional flexibility of the former linker compared with that of the latter, which affords better packed monolayers. The FTIR studies indicate that the adsorption geometry of all the dyads is qualitatively similar and similar to that of monomers. However, the dyads containing the 4,4'-diphenylethyne linker sit somewhat more upright on the surface than those containing the p-phenylene linker, generally consistent with the smaller molecular footprint for the former dyads. Collectively, the high surface charge density (34-58 muC.cm(-)(2)) of the porphyrin dyads makes these constructs viable candidates for molecular-information-storage applications.     

Electronic structure of high-valent transition metal corrolazine complexes. The young and innocent?

This is a first quantum chemical study of corrolazine complexes. DFT calculations suggest that despite their extremely contracted central cavities, compared with porphyrins, a variety of corrolazine complexes may be expected to exist as stable compounds. The calculations also indicate that corrolazine complexes may be regarded as strongly electron-deficient analogues of corrole complexes. Thus, the calculated valence ionization potentials of P(V) and Cu(III) corrolazine derivatives are dramatically higher than those of analogous corrole derivatives. In addition, DFT calculations on Fe(IV) and Mn(IV) corrole and corrolazine derivatives suggest that compared with the often noninnocent corrole ligands, corrolazines are electronically more innocent and stabilize "purer" high-valent states of transition metal ions.     

Ultrafast Photoinduced Charge Separation Leading to High‐Energy Radical Ion‐Pairs in Directly Linked Corrole–C60 and Triphenylamine–Corrole‐C60 Donor–Acceptor Conjugates

Closely positioned donor–acceptor pairs facilitate electron‐ and energy‐transfer events, relevant to light energy conversion. Here, a triad system TPACor‐C₆₀ , possessing a free‐base corrole as central unit that linked the energy donor triphenylamine ( TPA ) at the meso position and an electron acceptor fullerene (C₆₀) at the β‐pyrrole position was newly synthesized, as were the component dyads TPA‐Cor and Cor‐C₆₀ . Spectroscopic, electrochemical, and DFT studies confirmed the molecular integrity and existence of a moderate level of intramolecular interactions between the components. Steady‐state fluorescence studies showed efficient energy transfer from ¹ TPA* to the corrole and subsequent electron transfer from ¹corrole* to fullerene. Further studies involving femtosecond and nanosecond laser flash photolysis confirmed electron transfer to be the quenching mechanism of corrole emission, in which the electron‐transfer products, the corrole radical cation ( Cor^?+ in Cor‐C₆₀ and TPA‐Cor^?+ in TPACor‐C₆₀ ) and fullerene radical anion (C₆₀^??), could be spectrally characterized. Owing to the close proximity of the donor and acceptor entities in the dyad and triad, the rate of charge separation, k_CS, was found to be about 10¹¹ s^?1, suggesting the occurrence of an ultrafast charge‐separation process. Interestingly, although an order of magnitude slower than k_CS, the rate of charge recombination, k_CR, was also found to be rapid (k_CR≈10¹⁰ s^?1), and both processes followed the solvent polarity trend DMF>benzonitrile>THF>toluene. The charge‐separated species relaxed directly to the ground state in polar solvents while in toluene, formation of ³corrole* was observed, thus implying that the energy of the charge‐separated state in a nonpolar solvent is higher than the energy of ³corrole* being about 1.52 eV. That is, ultrafast formation of a high‐energy charge‐separated state in toluene has been achieved in these closely spaced corrole–fullerene donor–acceptor conjugates.     

Alkyl and aryl substituted corroles. 3. Reactions of cofacial cobalt biscorroles and porphyrin-corroles with pyridine and carbon monoxide

The synthesis and characterization of three new cofacial biscorroles and three new linked Co(II) porphyrins and Co(III) corroles with the same face to face orientation are described. The biscorroles are represented as (BCS)Co(2), (BCO)Co(2), (BCX)Co(2) while the porphyrin-corrole dyads are represented as (PCA)Co(2), (PCB)Co(2), (PCO)Co(2) where BC represents the Co(III) cofacial biscorroles and PC represents the porphyrin-corrole complexes which are linked to each other by a dibenzothiophene (S), dibenzofuran (O), or 9,9-dimethylxanthene (X) bridge in the case of the corroles and an anthracene (A), biphenylene (B), or dibenzofuran (O) bridge in the case of the mixed macrocycle derivatives. The electrochemical and spectroscopic data on these new bismacrocycles are compared to those of previously reported biscorroles of the type (BCA)Co(2) and (BCB)Co(2). The CO and/or pyridine binding properties of each biscorrole and porphyrin-corrole in CH(2)Cl(2) are also presented. Only one CO ligand is bound axially to each corrole unit of the bismacrocycle but five- and six-coordinate pyridine complexes can be generated for the same compounds, with the exact stoichiometry depending upon the concentration of pyridine in solution. In all cases, the six-coordinate bispyridine corrole complex can be unambiguously identified by a strong diagnostic marker band located at 598-601 nm. The formation constants for pyridine binding to the biscorroles range from log K(1) = 3.14 to 5.08 while log K(2) ranges from 1.10 to 2.61 depending upon the specific spacer. Carbon monoxide binding constants range from log K = 3.6 to 4.0 in the case of the biscorroles and from log K = 3.4 to 4.1 in the case of the porphyrin-corrole dyads. These values also depend on the specific spacer in the complex and, like the pyridine binding constants, decrease in the order BCO > BCA > BCB for the biscorroles and PCO > PCA > PCB for the porphyrin-corrole complexes.     

DNA binding and nuclease activity of cationic iron(IV) and manganese(III) corrole complexes

Cationic meso(4‐N‐methylpyridyl)‐based metallocorroles, μ‐oxo iron corrole dimer ( 1b ) and manganese corrole monomer ( 2b ), were synthesized and characterized. The interactions of these two metal corrole complexes with CT‐DNA were studied by UV–visible, fluorescence and circular dichroism spectroscopic methods, as well as by viscosity measurements. The results revealed that 1b interacts with CT‐DNA in a difunctional binding mode, i.e. non‐classical intercalation and outside groove binding with H‐aggregation, while 2b can interact with CT‐DNA via an outside groove binding mode only. The binding constants K_b of 1b and 2b were 4.71 × 10⁵ m ^?1 and 2.17 × 10⁵ m ^?1, respectively, indicating that 1b can bind more tightly to CT‐DNA than 2b . Furthermore, both complexes may cleave the supercoiled plasmid DNA efficiently in the presence of hydrogen peroxide or tert‐butyl hydroperoxide (TBHP), albeit 1b exhibited a little higher efficiency. The inhibitor tests suggested that singlet oxygen and high‐valent (oxo)iron(VI) corrole or (oxo)manganese(V) corrole might be the active intermediates responsible for the oxidative DNA scission. Copyright © 2014 John Wiley & Sons, Ltd.     

meso-meso-Linked corrole dimers with modified cores: synthesis, characterization, and properties

The synthesis and characterization of the first examples of core-modified corrole dimers linked through the meso positions are described. The dimers are obtained by a simple Ag(I)- or Fe(III)-catalyzed coupling reaction in near-quantitative yields. The corroles obtained are metalated with metal ions, such as Cu(II) and Ni(II). The electronic-absorption spectral studies reveal weak electronic interaction between the two subunits and the exciton coupling observed for the free-base corrole dimer (1717 cm(-1)) is lower than that for the corresponding protonated derivative (4081 cm(-1)). The solution-state structure derived from (1)H and two-dimensional NMR spectral studies reveals a noncoplanar arrangement of two corrole units. Geometry optimization at the B3LYP-631G level also confirms the noncoplanar arrangement of corroles with a dihedral angle of 64.8 degrees between two corrole planes. The electron paramagnetic resonance (EPR) and magnetic characterization studies on the paramagnetic copper-metalated dimer indicate that both copper ions behave as independent spins without any noticeable interaction. Results of fluorescence studies reveal a bathochromic shift of about 60 nm upon dimerization. The first hyperpolarizability (beta) measured by using the hyper Rayleigh scattering (HRS) method reveals doubling of the beta values on progressing from monomer to dimer, attributed to enhanced pi conjugation. The use of copper dimers in the photocleavage of DNA is also explored. It is shown that the bimetallic copper dimer selectively cleaves the nucleic acids without affecting the proteins, suggesting a possible application of the copper complex in the removal of nucleic acid contaminants from protein extracts through a simple photolytic pathway.     

Heterobimetallic complexes of cobalt(IV) porphyrin-corrole dyads. Synthesis, physicochemical properties, and X-ray structural characterization

The synthesis of a novel family of heterobinuclear cofacial biphenylene (B), anthracene (A), 9,9-dimethylxanthene (X), or dibenzofuran (O) bridged porphyrin-corrole complexes, (PCY)MClCoCl, is reported, M being either an iron(III) or manganese(III) ion. Each complex was characterized by electrochemistry, mass spectrometry, UV-vis, IR, and electron spin resonance spectroscopy. Unlike previously examined biscobalt porphyrin-corrole dyads, the cobalt ion of the corrole moiety is present in a high-valence +4 oxidation state, as proven by electrochemistry, spectroelectrochemistry, and an X-ray diffraction study of (PCB)FeClCoCl, which shows the presence of a bound Cl- anion on the cobalt corrole. Structural data: (PCB)FeClCoCl x 0.5(C7H16) x 0.5(CH2Cl2) x 2H2O, triclinic, space group P1, a = 13.8463(3) A, b = 16.8164(5) A, c = 17.9072(6) A, alpha = 93.780(1) degrees, beta = 111.143(1) degrees, gamma = 97.463(2) degrees, Z = 2.     

Case synthesis of a β-chloro bulky bis-pocket corrole: Crystallographic characterization and photophysical properties

A new bulky 2-chloro-5,10,15-tris(2,4,6-triphenylphenyl)-corrole was casually synthesized and the effect of mono-β-chlorination on its photophysical, electrochemical properties and light-induced singlet oxygen generation was investigated.     

Stable meso–meso‐Linked 2NH‐Corrole Radical Dimers as a Key Intermediate to Corrole Tape

While oxidation of 5,5′,15,15′‐tetramesityl‐10‐10′‐linked 3NH‐corrole dimer with DDQ gave the corresponding triply linked 2NH‐corrole tape, the use of an equimolar amount of p‐chloranil as a milder oxidant resulted in the formation of a 10‐10′‐linked neutral 2NH‐corrole radical dimer as a stable product. The stability of this peculiar product is ascribed largely to strong antiferromagnetic interaction of the two spins. Further oxidation of this diradical produced corrole tape, suggesting its involvement as a reaction intermediate to the corrole tape. Oxidation of 10‐10′‐linked bis‐pyridine‐coordinated Co^III corrole dimer with DDQ produced a cobalt corrole radical dimer and a doubly linked corrole dimer both as stable compounds bearing pyridine and cyanide axial ligands. This type of oxidative transformation involving neutral diradical intermediates is a unique reaction mechanism specific for corrole dimers.     

meso‐Free Corroles: Syntheses,Structures, Properties,and Chemical Reactivities

5,10‐Bis(pentafluorophenyl)corrole ( 5 ) and 5,15‐bis(pentafluorophenyl)corrole ( 9 ) have been synthesized as meso‐free corroles by rational synthetic routes. Both the structures of these corroles have been unambiguously revealed by X‐ray diffraction analysis and their optical and electrochemical properties have been studied. Chlorination and oxidative dimerization of 5 and 9 have been explored, which revealed a marked different reactivity of the free meso‐positions in 5 and 9 . 10‐Chlorinated corrole 11 was effectively prepared by the reaction of 9 with Palau‘chlor in the presence of 1 % pyridine whereas 5‐chlorinated corrole 12 was obtained in a trace amount from similar chlorination of 5 . 5,5′‐Linked corrole dimer 13 was produced by reaction of 5 with AgNO₂ in a good yield, whereas 10,10′‐linked corrole dimer 14 was formed in a moderate yield by the reaction of 9 with [bis(trifluoroacetoxy)iodo]benzene. Observed large electronic interaction between the two corroles in 13 as compared with that in 14 has been ascribed mainly to conformational flexibility of the former, which allows more coplanar conformation.