Starting SCF calculations by superposition of atomic densities

We describe the procedure to start an SCF calculation of the general type from a sum of atomic electron densities, as implemented in GAMESS-UK. Although the procedure is well known for closed-shell calculations and was already suggested when the Direct SCF procedure was proposed, the general procedure is less obvious. For instance, there is no need to converge the corresponding closed-shell Hartree-Fock calculation when dealing with an open-shell species. We describe the various choices and illustrate them with test calculations, showing that the procedure is easier, and on average better, than starting from a converged minimal basis calculation and much better than using a bare nucleus Hamiltonian.     

电极法临床电解质分析仪进样流程的改进

针对目前临床电解质分析仪进样流程存在的问题，提出了新的进样流程，通过实际应用和计算机仿真表明，新的进样流程减少了流路液体残留的影响，提高了测量准确度。     

Avoiding negative populations in explicit Poisson tau-leaping

The explicit tau-leaping procedure attempts to speed up the stochastic simulation of a chemically reacting system by approximating the number of firings of each reaction channel during a chosen time increment tau as a Poisson random variable. Since the Poisson random variable can have arbitrarily large sample values, there is always the possibility that this procedure will cause one or more reaction channels to fire so many times during tau that the population of some reactant species will be driven negative. Two recent papers have shown how that unacceptable occurrence can be avoided by replacing the Poisson random variables with binomial random variables, whose values are naturally bounded. This paper describes a modified Poisson tau-leaping procedure that also avoids negative populations, but is easier to implement than the binomial procedure. The new Poisson procedure also introduces a second control parameter, whose value essentially dials the procedure from the original Poisson tau-leaping at one extreme to the exact stochastic simulation algorithm at the other; therefore, the modified Poisson procedure will generally be more accurate than the original Poisson procedure.     

Speciation of waste water sediments

A sequential extraction procedure for waste water sediments was elaborated based on CO₂ and water extractants using supercritical fluid extraction instrumentation. The procedure gives information on water-soluble, carbonate-bound and mobile organic-bound trace metal fractions. The chemical interpretation of this procedure is comparable with the BCR recommended three-stage sequential extraction. The validation of the proposed procedure requires more detailed investigations.     

Convenient,multicomponent, one-pot synthesis of highly substituted pyridines under solvent-free conditions

Highly substituted pyridine derivatives have been accessed through an efficient, one-pot, multicomponent reaction of aldehydes, malononitrile, and ammonium acetate in the presence of triethylamine as a catalyst under solvent-free conditions. This procedure affords the desired products in high purity and has advantages such as short reaction time, excellent yields, and simple workup procedure. This procedure affords the desired products in moderate to high yields and has such advantages as short reaction time and simple workup procedure.     

Procedures for the preparation of silanols

Two procedures are described for the preparation of silanols and silanediols from the corresponding chlorosilanes. The first procedure, a two-phase hydrolysis-extraction process, is particularly convenient and suited to the preparation of a wide range of mono-silanols. Hydrolysis of dichlorosilanes by this procedure gives varied results depending on the structure of the dichlorosilane and specific reaction conditions. The second procedure, a modification of a published procedure, is especially beneficial for the preparation of silanols and silanediols prone to undergo self-condensation.     

Quantitative analysis of morphine in dried blood spots by using morphine-d3 pre-impregnated dried blood spot cards

Two different internal standard dried blood spot (DBS) pre-impregnation procedures (prior to blood spotting) were investigated. In the first procedure DBS pre-impregnation is performed by immersing the DBS card fully into an internal standard solution. In the second procedure pre-impregnation is performed by pipetting a certain volume of an internal standard solution onto the DBS card. Morphine-d3 was used as the model compound for all experiments. The pre-impregnation procedure by immersing was further investigated with respect to homogeneity of impregnation, influence of different blood spotting techniques and the influence of spotting different blood volumes on the internal standard distribution, calibration and stability of pre-impregnated cards. Finally, the immersing procedure was used for the analysis of morphine in dried blood spots and the results were compared to the conventional procedure in which the internal standard morphine-d3 was added to the extraction solvent. The new pre-impregnated cards couple simplicity of operation and convenient use in the field to results equivalent to the conventional procedure.     

Determination of a platelet activating factor antagonist (CV-3988): methodology and clinical application

A high-performance liquid chromatographic method was developed for determination of the platelet activating factor antagonist CV-3988 in human plasma and urine. After development of a column extraction procedure without an internal standard, a more satisfactory organic extraction procedure was set up with amiodarone as internal standard. Linearity of the calibration curves was found in the range 0.0625-10 micrograms/ml CV-3988. Reproducibility was higher than 10% for the column extraction and lower than 10% for the organic extraction procedure. Recovery of CV-3988 from plasma averaged 81.7% for the column procedure and 40% for the organic extraction. Urine samples could be extracted only by the organic extraction procedure. The organic extraction procedure was applied to the determination of CV-3988 in plasma and urine samples after intravenous administration to normal volunteers.     

Liquid Chromatographic Analysis of Ciprofloxacin and Ciprofloxacin Metabolites in Body Fluids

Abstract

An isocratic HPLC assay procedure for analysis of ciprofloxacin and three metabolites was developed. The procedure requires only dilution of bile, saliva, and urine samples prior to reverse-phase chromatography on a polystyrene-divinylbenzene (PSDVB) column; analysis of serum samples requires a cleanup step on a PSDVB cartridge prior to chromatography. The dependence of chromatographic efficiency on flow rate and temperature was investigated and the accuracy, precision, selectivity, and sensitivity of the procedure were evaluated. The developed procedure was also compared to a modified version of a published ciprofloxacin procedure that requires an octadecyl-silane (ODS) column for chromatographic separation. Similar efficiency, precision, and accuracy were observed with both procedures and both were used for analysis of clinical samples. However, the procedures were used for different purposes. The PSDVB procedure, because of more favorable column selectivity, was used to assay ciprofloxacin and its metabolites in bile, urine and saliva samples. The ODS procedure, because of a simpler serum preparation step, was used t o assay ciprofloxacin in serum samples.     

The Determination of Methenamine and its Salts in Tablet Dosage Forms Using Ion-Pair Extraction

Abstract

This paper reports a simple, accurate, reproducible, stability-indicating procedure which may be used to quantitatively determine methenamine base, methenamine mandelate or methenamine hippurate in tablet dosage forms. The procedure initially involves the separation of methenamine from the dosage form and from formaldehyde, the decomposition product, by a cartridge ion-pair extraction process. The methenamine may then be assayed by a number of methods. In this paper the methenamine was hydrolyzed to formaldehyde and the formaldehyde determined by the Nash procedure. The method compares favorably with the USP XXI procedure for methenamine tablets. Advantages of the procedure include the ability to use a single method for the base and salt forms of the drug and the potential application to stability and quality control studies of methenamine dosage forms.     

The mitochondria from beef heart as biosensors for the selective monitoring of phenols

We propose a simple and rapid procedure which allows for the selective monitoring in solution of toxic compounds which behave as uncouplers of the oxidative phosphorylation. Since all phenols, are uncouplers of the oxidative phosphorylation, the procedure allows for the selective monitoring in solution of phenols even in presence of other toxic compounds. The biological sensor are the mitochondria from beef heart. This biosensor is easily available without a stabular and therefore the biosensor and the whole procedure is very simple and not expensive. By linear regression analysis, it results that the procedure well predicts the response of the standard fish method to phenols. Therefore the procedure can be utilized as prescreening analysis for the monitoring the phenols in aqueous samples.     

Prediction of protein retention at gradient elution conditions in ion-exchange chromatography.

This work presents a prediction procedure for protein retention in ion-exchange chromatography, where two linear gradient experiments of different length give the protein retention time at other linear gradients. The procedure predicts the retention time of early and late eluting proteins with similar precision and predictions by extrapolation deviate approximately 3% or less from the experimental retention times. By using the ionic strength, this procedure predicts protein retention times obtained with divalent ions in the eluent more accurately than a well-established procedure that uses the protein co-ion concentration.     

Time versus temperature rescaling for coarse grain molecular dynamics simulations

Coarse graining procedures are intended to well reproduce the structure of a material while increasing the simulations efficiency. However, the dynamics usually accelerates with coarse graining and a scaling procedure has to be used for dynamical data calculations. Most often a simple time-scaling coefficient is used for this purpose. However, for low temperature liquids this simple scaling procedure is questionable. Because supercooled liquids in their approach to the glass transition temperature do not follow a simple dynamics. In order to test if this scaling procedure is still pertinent at low temperature, we use molecular dynamics simulations of a coarse grain model of the methylmethacrylate molecule compared to simulations with the All atom model. We compare two different rescaling procedures, a time rescale and a temperature rescale procedure. Using these two procedures we compare the behaviors of the mean square displacements, the incoherent scattering functions, the self and distinct part of the Van Hove correlation functions and the non-Gaussian parameters. Results show that the temperature rescaling procedure reproduces well the All atom dynamical data at low temperatures, while the time rescaling procedure is correct only in the Brownian regime. We also find that the melting and the glass-transition temperatures are relatively well reproduced with the temperature rescaling procedure.     

Spectrophotometric determination of aliphatic aldehyde 2,4-dinitrophenylhydrazones with 3-methyl-2-benzothiazolinone hydrazone

A sensitive new spectrophotometric procedure is described for the analysis of aliphatic aldehyde 2,4-dinitrophenylhydrazones. The chromogens formed in the procedure absorb at 667 mμ and are approximately three times as intense at this band as the starting aldehyde derivatives are in neutral and alkaline solvent at their wavelength maxima. With further improvement the procedure is capable of even greater sensitivity. Other aliphatic aldehyde derivatives also should be analyzable by this procedure, but 2,4-dinitrophenylhydrazones of ketones do not react.     

Potential methods in pattern recognition : Part 3. Feature selection with ALLOC

The feature selection procedure of ALLOC is compared with the SELECT procedure in the ARTHUR software package and with a procedure based on statistical tests in the SPSS software package. Since ALLOC classification is very sensitive to redundant variables, feature selection is necessary. This is not a disadvantage because detection of redundant variables is always desirable. The ALLOC selection procedure performs very well in the two applications considered here, i.e., differentiation of milk samples and characterization of thyroid function.     

Using coomassie blue to stabilize H2O2-guaiacol stained peroxidases on polyacrylamide gels.

Shimoni and Reuveni [1] have reported a procedure which uses Coomassie Brilliant Blue R-250 staining and destaining to stabilize H2O2-guaiacol stained peroxidases on polyacrylamide gels and at the same time detects nonspecific protein bands. The procedure has the advantage that the otherwise orange and unstable peroxidase bands are visualized as blue bands and it, therefore, facilitates laser densitometry of electrophoretically separated peroxidases. In the modification of the procedure reported here, the Coomassie staining reagent was adjusted and the destaining step was eliminated. The modified procedure has added advantages: it simplifies the procedure, increases the consistency of the results across gels, prevents or reduces the staining of nonspecific proteins, and still gives excellent resolution of stable bands which can be used to quantify peroxidase activity.     

An improved radiochemical procedure for low-level measurements of americium in environmental matrices

The chemical yield and accuracy of measurements of (241)Am at low levels in marine environmental matrices have been substantially improved by applying the extraction procedure with DDCP (dibutyl-N,N-diethylcarbamylphosphonate). The improved procedure is described, and its advantages over the conventional procedure are discussed.     

Preparation of cellulose samples for size-exclusion chromatography analyses in studies of paper degradation

Hydrolytic degradation of cellulose was shown to take place during the activation procedure in distilled water during the dissolution procedure of cellulose samples from papers for size-exclusion chromatography analyses in the lithium chloride-N,N-dimethylacetamide (DMAc) solution system. The use of dilute aqueous sodium hydroxide solution in the activation procedure prevents hydrolytic degradation of cellulose during the dissolution procedure, especially in the case of samples of aged papers with low pH. The use of the freeze-drying technique provides samples of cellulose ready-made for dissolution in lithium chloride-N,N-dimethylacetamide solution.     

Application of sequential extraction with supercritical CO(2), subcritical H(2)O,and an H(2)O/CO(2) mixture for estimation of environmentally mobile heavy metal fractions in sediments

Results from use of a new isolation procedure based on sequential extraction with supercritical CO(2), subcritical H(2)O, and an H(2)O/CO(2) mixture in the same supercritical fluid extractor have been compared with results from the BCR-recommended three-step sequential extraction procedure. The new procedure gives more detailed information about environmentally mobile fractions (water-soluble, bicarbonate-forming), and in less time (5-6 h), than the BCR procedure.     

非还原脲变性蛋白溶菌酶稀释复性过程中集聚现象的研究

用十二烷基硫酸钠-聚丙烯酰胺凝胶电泳、阴极聚丙烯酰胺凝胶电泳和高效凝胶排阻色谱法, 研究了非还原脲变性蛋白溶菌酶在稀释复性过程中的集聚现象. 实验发现, 在整个稀释复性过程中, 没有蛋白溶菌酶集聚体沉淀产生. 当最终复性液中蛋白溶菌酶浓度小于4.0 mg/mL时, 复性过程中不会形成蛋白溶菌酶分子集聚体; 当最终复性液中蛋白溶菌酶浓度介于4.0～8.0 mg/mL时, 复性过程中会形成由非共价相互作用所引起的蛋白溶菌酶二分子和三分子集聚体; 而当最终复性液中蛋白溶菌酶浓度大于8.0 mg/mL时, 复性过程中除了会形成二分子和三分子蛋白溶菌酶集聚体外, 还会形成四分子蛋白溶菌酶集聚体. 在此基础上, 结合文献, 对非还原脲变性蛋白溶菌酶的稀释复性过程进行了描述.