Rational design of the benzothiazole-based fluorescent scaffold for tunable emission

The 2-(2-hydroxyphenyl)-benzothiazole (HBT) fluorophore has attracted considerable attention due to its excited-state intramolecular proton transfer (ESIPT) based emission and its large Stokes shift. However, this fluorophore possesses several disadvantages including low quantum yield and short emission in the blue range. In this study, by coupling HBT at the ortho-, meta-, and para-positions to the hydroxyl group with different heterocycles to extend the conjugation system, we have successfully obtained new fluorophores with tunable emissions both in solution and in the solid-state (409–652?nm). Notably, all of the derivatives demonstrated improved quantum yields compared with the parent HBT structure. Moreover, selected compounds have been shown to shine brightly in live cells, indicating promising potential for bioimaging.     

Synthesis and properties of novel aromatic poly(ester-imide)s bearing 1,5-bis(benzoyloxy)naphthalene units

Two series of new aromatic poly(ester-imide)s were prepared from 1,5-bis(4-aminobenzoyloxy)naphthalene (p-1) and 1,5-bis(3-aminobenzoyloxy)naphthalene (m-1), respectively, with six commercially available aromatic tetracarboxylic dianhydrides via a conventional two-stage synthesis that included ring-opening polyaddition to give poly(amic acid)s followed by chemical imidization to polyimides. The intermediate poly(amic acid)s obtained in the first stage had inherent viscosities of 0.41-0.84 and 0.66-1.37 dl/g, respectively. All the para-series and most of the meta-series poly(ester-imide)s were semicrystalline and showed less solubility. Two of the meta-series poly(ester-imide)s derived from less rigid dianhydrides were amorphous and readily soluble in polar aprotic solvents, and they could be solution-cast into transparent and tough films with good mechanical properties. The meta-series polymers derived from rigid dianhydrides were generally semicrystalline and showed less solubility. Except for one example, the meta-series poly(ester-imide)s displayed discernible T_gs in the range 239-273 °C by DSC. All of these two series poly(ester-imide)s did not show significant decomposition below 450 °C in nitrogen or in air.     

A new cyano-substituted fluorescamine superior to its original form as a fluorescent probe for amino acid detection

Synthesis and spectral study of two new cyano-substituted fluorescamine as the fluorescent probes for amino acid detection have been carried out comparing with the original fluorescamine. Of the three compounds, the derivative with a cyano group at the meta-position on the 4-phenyl group was found to be superior to the original one in the reactivity toward some amino acids as well as the fluorescence intensity of the adducts. The fluorescent amino acid adducts were also applied to the peroxyoxalate chemiluminescence system as the fluorophores, in which the derivative described above was found to be more effective also in chemiluminescence than the original one.     

Synthesis of arylethynylated cyclohexa-m-phenylenes via sixfold Suzuki coupling

A one-step, one-pot assembly of arylethynylated cyclohexa-m-phenylenes from meta-dibromide and meta-diboronic acids has been accomplished using a sixfold Suzuki macrocyclization, without the need for high dilution or slow-addition techniques.     

Multifunctional zig-zag-shaped D-π-A-π-D emitters with high conjugation extent for blue FOLEDs and host for PHOLEDs

We have synthesized zig-zag shaped, meta- and para-linked D-π-A-π-D blue emitters, m-BTPAPy and p-BTPAPy based on a non-symmetrical connection strategy of two identical π-conjugated groups. The phenanthrimidazole moiety coupled to pyridine via naphthyl spacer by para- and meta-linking modes. Both m-BTPAPy (T_d/T_g, °C: 564/281) and p-BTPAPy (T_d/T_g, °C: 502/246) exhibit excellent thermal stability and can form a stable amorphous film. Changing the connection strategy from para to meta mode, m-BTPAPy shows deep blue emission with CIE (0.15, 0.07). The highly twisted m-BTPAPy exhibit higher Photoluminescence quantum yield (PLQY)_s/f of 0.98/0.85 than p-BTPAPy (0.95/0.80) owing to the suppression of intermolecular stacking. The non-doped blue device (BOLEDs) with multifunctional m-BTPAPy/p-BTPAPy show external quantum efficiency (EQE) of 7.12/5.12% with small roll-off efficiency of 1.68/2.14%, power efficiency (PE) of 5.92/5.42 lm/W, the luminance of 58675/76234 cd/m², and current efficiency (CE) of 6.12/5.86 cd/A. The non-doped device using m-BTPAPy/p-BTPAPy as both emitting and electron-transporting material exhibit luminance of 40671/49539 cd/m², CE of 5.01/5.08 cd/A, PE of 4.68/4.76 lm/W, EQE of 6.12/4.81%, roll-off efficiency of 1.63/1.87%, and CIE (0.15, 0.10)/(0.15, 0.11). These bipolar materials with high triplet energy were employed as hosts in green and red PhOLEDs. The green (m-BTPAPy: Ir(ppy)₃)/red device (m-BTPAPy: Ir(MDQ)₂(acac)) exhibit maximum EQE of 29.85/20.09%, luminance of 79523/42412 cd/m², CE of 78.62/27.56 cd/A, and PE of 72.36/23.86 lm/W, and CIE (0.33, 0.60)/(0.65,0.33).     

Photolysis of <Emphasis Type="Italic">meta</Emphasis>-azidophenol in solutions

The photolysis of meta-azidophenol in various organic solvents and aqueous solutions is studied by IR spectroscopy, electronic absorption spectroscopy, thin-layer chromatography (TLC), and analytical spot-test reactions. The polymeric derivatives of hydroxylamine are formed in organic solvents (benzene, chloroform, acetonitrile) via the interaction of nitrene with the phenol group of a neighboring m-azidophenol molecule. N-(meta-Hydroxyphenyl)hydroxylamine,—the product of the nitrene reaction with water, is formed in ethanol and aqueous solutions.     

Construction of deep-blue AIE luminogens with TPE and oxadiazole units

In this paper, two AIE-active luminogens (Oxa-pTPE and Oxa-mTPE) constructed from tetraphenylethene and oxadiazole units were successfully synthesized and their thermal, optical and electronic properties were investigated. By linking TPE to the oxadiazole core through meta-or para-position, the intramolecular conjugation is effectively controlled. Thanks to the intelligent molecular design and specific AIE feature, when fabricated as emissive layers in non-doped OLEDs, they exhibit blue or deep-blue emission with CIE coordinates of (0.17, 0.23) and (0.15, 0.12), and good efficiencies with ηC, max and ηP, max up to 1.52 cd A-1 and 0.84 Im W-1 , shedding some light on the construction of deep-blue AIE fluorophores.     

Relative sensitization efficiency of fluorescent probes/sensitizers for monitoring and acceleration of cationic photopolymerization of monomers

The performance of a series of 1-amino-2,6-dicyano-3,5-diphenylbenzene derivatives (i.e., meta-terphenyls) as fluorescent molecular probes for monitoring cationic photopolymerization of monomers by the Fluorescence Probe Technique (FPT) was studied. It was found that the m-terphenyls accelerate the cationic photopolymerization initiated with diphenyliodonium photoinitiators at the wavelength where the photoinitiator alone does not work. Consequently, application of the m-terphenyls in a dual role: (a) as fluorescent probes for monitoring the cationic polymerization progress, and (b) as long-wavelength sensitizers for diphenyliodonium photoinitiators is proposed. Next, a precise method for determination of relative sensitization efficiency of the sensitizers has been devised and applied for evaluation of the performance of the m-terphenyl sensitizers in comparison to that of a commercial sensitizer: 2,4-diethyl-9H-thioxanthen-9-one.     

Silver Nanowires and Silanes in Hybrid Functionalization of Aramid Fabrics

New functionalization methods of meta- and para-aramid fabrics with silver nanowires (AgNWs) and two silanes (3-aminopropyltriethoxysilane (APTES)) and diethoxydimethylsilane (DEDMS) were developed: a one-step method (mixture) with AgNWs dispersed in the silane mixture and a two-step method (layer-by-layer) in which the silanes mixture was applied to the previously deposited AgNWs layer. The fabrics were pre-treated in a low-pressure air radio frequency (RF) plasma and subsequently coated with polydopamine. The modified fabrics acquired hydrophobic properties (contact angle Θ_W of 112–125°). The surface free energy for both modified fabrics was approximately 29 mJ/m², while for reference, meta- and para-aramid fabrics have a free energy of 53 mJ/m² and 40 mJ/m², respectively. The electrical surface resistance (R_s) was on the order of 10² Ω and 10⁴ Ω for the two-step and one-step method, respectively. The electrical volume resistance (R_v) for both modified fabrics was on the order of 10² Ω. After UV irradiation, the Rs did not change for the two-step method, and for the one-step method, it increased to the order of 10¹⁰ Ω. The specific strength values were higher by 71% and 63% for the meta-aramid fabric and by 102% and 110% for the para-aramid fabric for the two-step and one-step method, respectively, compared to the unmodified fabrics after UV radiation.     

Unexpected reactivity of 1-amine-2-methylenenorbornane hydrochlorides with m-CPBA

Two different 1-amino-3,3-dimethyl-2-methylenenorbornane hydrochlorides, a primary ammonium chloride and a tertiary one, react unexpectedly with m-CPBA (meta-chloroperbenzoic acid) according to two different paths. The primary ammonium chloride gives place to a diastereomeric mixture of the corresponding spiranic 1-nitronorbornane-based epoxides, whereas the tertiary derivative undergoes a skeleton rearrangement giving 10-chlorocamphor. The results are interpreted in terms of competitive reaction pathways controlled by the nitrogenated group located at the C1 norbornane position.     

Preparation,characterization of new Co(II) and Cu(II) phthalocyanines and their catalytic performances in aerobic oxidation of substituted phenols

The host–guest inclusion complex of meta-cresol (m-cresol, liquid at room temperature, guest molecule) is synthesized with β-cyclodextrin (β-CD, host molecule). The inclusion complex is characterized by various techniques like nuclear magnetic resonance, powder X-ray diffraction, field emission scanning electron microscopy and spectroscopic (steady state as well as time-resolved) techniques. To the best of our knowledge, no literature data is available on the photophysical properties (especially fluorescence upon photoexcitation) of m-cresol in liquid media till date. Our spectroscopic studies exhibit some interesting photophysical properties of m-cresol and its inclusion complex with β-CD in different liquid media. The present work is important in view of the various potential applications of m-cresol in science, technology and medicine.     

Opposite ESIPT characteristic of two AIE-active isomers with different linkage sites

In this work, we report two isomers composed of 1-phenyl-1H-phenanthro[9,10-d]imidazole (PI), hydroxyl and tetraphenylethylene (TPE), abbreviated as m-PITPE and p-PITPE. It is found that they exhibit similar aggregation-induced emission (AIE) behavior but totally different excited-state intramolecular proton transfer (ESIPT) characteristic, as a result of the different linkage sites of PI on TPE moiety. Theoretical calculations and their different experimental responses to F^? demonstrate that only the para-linkage isomer displays ESIPT. In m-PITPE with meta-linkage, the electron cloud distribution only locates at the TPE part in the singlet excited (S₁) states, which results in the localized excited state without ESIPT characteristic.     

m-Aminobenzoic acid inserted β-turn in acyclic tripeptides: a peptidomimetic design

X-ray diffraction studies show that peptides Boc-Leu-Aib-m-ABA-OMe (I) (Aib, α-aminoisobutyric acid; m-ABA, meta-aminobenzoic acid) and Boc-Phe-Aib-m-ABA-OMe (II) adopt a type-II β-turn conformation, solely stabilized by co-operative steric interactions amongst the amino acid residues. This type of β-turn without any intramolecular hydrogen bonding is generally referred to as an open turn. Although there are some examples of constrained cyclic peptides in which o-substituted benzenes have been inserted to mimic the turn region of the neurotrophin, a nerve growth factor, peptides I and II present novel two examples where m-aminobenzoic acid has been incorporated in the β-turn of acyclic tripeptides. The result also demonstrates the first crystallographic evidence of a β-turn structure containing an inserted m-aminobenzoic acid, which can be considered as a rigid γ-aminobutyric acid with an all-trans extended configuration.     

Tuning the Cell Uptake and Subcellular Distribution in BODIPY–Carboranyl Dyads: An Experimental and Theoretical Study

A set of BODIPY-carboranyl dyads synthesized by a Sonogashira cross-coupling reaction, where different C-substituted ortho- and meta-carboranyl fragments have been linked to a BODIPY fluorophore is described. Chemical, photophysical and physicochemical analyses are presented, including NMR and single XRD experiments, optical absorption/emission studies and partition coefficient (log P) measurements. These studies, supported by DFT computations (M06-2X/6-31G**), provide an explanation to the largely divergent cell income that these fluorescent carboranyl-based fluorophores display, for which a structural or physicochemical explanation remains elusive. By studying the cell uptake efficiency and subcellular localization for our set of dyads on living HeLa cells, we tracked the origins of these differences to significant variations in their static dipole moments and partition coefficients, which tune their ability to interact with lipophilic microenvironments in cells. Remarkably, m-carboranyl-BODIPY derivatives with a higher lipophilicity are much better internalised by cells than their homologous with o-carborane, suggesting that m-isomers are potentially better theranostic agents for in vitro bioimaging and boron carriers for boron neutron capture therapy.     

One-pot synthesis of (Z)-β-sulfonyl enoates from ethyl propiolate

β-Sulfonyl enoates may be synthesized through a one-pot two-step sequence from ethyl propiolate with good to excellent selectivity for the Z isomer. Trialkylamines catalyze thioconjugate additions of aryl thiols, and alkoxides catalyze the addition of aliphatic thiols. Addition of meta-chloroperbenzoic acid (mCPBA) and LiClO₄ to the reaction mixture provides rapid access to the sulfonyl enoates. Yields of the pure Z isomer range from 51-90%.     

Enthalpic and entropic contributions to substituent effects for the ionization of meta- and para-hydroxybenzoic acids in water—dimethylsulfoxide mixtures at 25°C

Separate enthalpic and entropic contributions to substituent effects on the dissociation of m-hydroxybenzoic acid in water—dimethylsulfoxide mixtures ranging from 0.0 to 0.57 mole fraction of DMSO are presented. The effect of the medium on the reaction constant is explained in terms of solute—solvent interactions. The entropy reaction constant values ?_s of the meta-hydroxy compound are much greater than those of the meta-chloro and nitro compounds in the examined mole fraction range.For the para-hydroxy isomer only a trend of σ_s and ?_s values can be calculated. This fact is due to the electron-releasing resonance effect which overlaps and prevails over the inductive effect.     

Polymethylations of bis(cyanomethyl)benzenes

o-, m- and p-bis(cyanomethyl)benzene were reacted with various quantities of methyllithium and methyliodide. Di and tetra methylations can be easily obtained in the cases of the meta and para isomers. Di and tri methylations were obtained in the reactions of the ortho isomer. The product from tri methylation of the ortho isomer cyclizes under the reaction conditions to a 3-indanone derivative.     

Anion binding by meta ureido-substituted thiacalix[4]arenes

The regioselective nitration of 25,26,27,28-tetrapropoxythiacalix[4]arene (1,3-alternate) led to the formation of mono- and dinitro derivatives bearing NO₂ groups in the meta positions at the same side of the molecule. Their reduction and subsequent condensation with arylisocyanates gave the new types of anion receptors with a so far unknown meta-substitution pattern. In a highly HB-competitive solvent like DMSO, the novel ligands showed good complexation abilities. Moreover, as can be documented by higher complexation constants, achiral receptors 9a, 9b are better preorganized for anion binding than corresponding stereoisomers 10a, 10b. Our results indicate that anion receptors based on meta-substituted thiacalixarenes possess complexation abilities fully comparable with common para-substituted analogues.     

Site-selective coupling of remote C(sp3)–H/meta-C(sp2)–H bonds enabled by Ru/photoredox dual catalysis and mechanistic studies

Construction of C(sp²)–C(sp³) bonds via regioselective coupling of C(sp²)–H/C(sp³)–H bonds is challenging due to the low reactivity and regioselectivity of C–H bonds. Here, a novel photoinduced Ru/photocatalyst-cocatalyzed regioselective cross-dehydrogenative coupling of dual remote C–H bonds, including inert γ-C(sp³)–H bonds in amides and meta-C(sp²)–H bonds in arenes, to construct meta-alkylated arenes has been accomplished. This metallaphotoredox-enabled site-selective coupling between remote inert C(sp³)–H bonds and meta-C(sp²)–H bonds is characterized by its unique site-selectivity, redox-neutral conditions, broad substrate scope and wide use of late-stage functionalization of bioactive molecules. Moreover, this reaction represents a novel case of regioselective cross-dehydrogenative coupling of unactivated alkanes and arenes via a new catalytic process and provides a new strategy for meta-functionalized arenes under mild reaction conditions. Density functional theory (DFT) calculations and control experiments explained the site-selectivity and the detailed mechanism of this reaction.

A novel photoinduced Ru/photocatalyst-cocatalyzed regioselective cross-dehydrogenative coupling of dual remote C–H bonds, including inert γ-C(sp³)–H bonds in amides and meta-C(sp²)–H bonds in arenes, to construct meta-alkylated arenes has been accomplished.     

An efficient material via meta-position connection as thermally activated delayed fluorescence emitter for organic light-emitting diodes

A novel compound was designed and synthesized by connecting a dicyanobenzene acceptor and two 9,9-dimethyl-9,10-dihydroacridine donors to the 1,3,5-position of a phenyl ring by meta-position connection. This compound, which is a novel emitter for OLED devices, exhibits preferable heat stability. Moreover, the energy gap between its singlet and triplet states is as small as 0.04 eV, resulting in this molecule possesses thermally activated delayed fluorescence. Therefore, the corresponding device showed efficient electroluminescent performances. The maximum external quantum efficiency, maximum current efficiency, maximum power efficiency and maximum luminance were 16.5%, 40.8 cd A^?1, 45.8 lm W^?1 and 5120 cd m^?2, respectively. In addition, the CIE_x,y only changed from (0.22, 0.38) to (0.22, 0.39) over the entire operating voltage range, which confirms that the device possesses highly stable chromaticity with respect to the current density. Based on these experimental results, meta-connected type structures may provide a new approach for developing high-performance TADF emitters for OLED applications.