Iridodials: enantiospecific synthesis and stereochemical assignment of the pheromone for the golden-eyed lacewing, Chrysopa oculata

1R,2S,5R,8R; 1R,2S,5R,8S; 1S,2S,5R,8R; and 1S,2S,5R,8S-Iridodials have been prepared in five steps from 4aS,7S,7aR and 4aS,7S,7aS-nepetalactones, major components of catnip oil. 1R,2S,5R,8R-Iridodial has been identified as a male-produced male-aggregation pheromone for Chrysopa oculata, the first pheromone of any kind identified for lacewings.     

A model for transitional plane Couette flow

A simplified model of plane Couette flow is derived by means of a cross-stream (y) Galerkin expansion in terms of trigonometric functions appropriate for idealized stress-free boundary conditions at the plates. A set of partial differential equations is obtained, governing the in-plane (x–z) space-dependence of a velocity field taken in the form: u=U₀(x,z,t)+[1+U₁(x,z,t)]sin(πy/2), v=V₁(x,z,t)cos(πy/2), w=W₀(x,z,t)+W₁(x,z,t)sin(πy/2). Beyond Lorenz-like Waleffe's modeling (Waleffe 1997), this Swift–Hohenberg type of approach is expected to give an access to the microscopic mechanism of spatiotemporal intermittency typical of the transition to turbulence in plane Couette flow (Pomeau 1986, Bergé et al. 1998).     

Copper(I) catalysis: Synthesis of N,N′-diarylated and N-aryl,N′-formylated chiral C2-symmetric diamines

Chiral N,N′-diaryl C₂-symmetric diamines and N-aryl,N′-formyl-trans-(1R,2R)-diaminocyclohexane are readily accessed by copper catalyzed N,N′-diarylation and N-aryl,N′-formylation of trans-(1R,2R)-diaminocyclohexane with aryl bromides. N,N′-diarylation using (R)-1,1′-binaphthyl-2,2′-diamine and iodobenzene gave the corresponding (R)-N,N′-diphenyl-1,1′-binaphthyl-2,2′-diamine derivative in 83% yield.     

Biorational synthesis of iridomyrmecin diastereomers from catnip oil

4S,4aS,7S,7aR; 4R,4aS,7S,7aR; 4S,4aS,7S,7aS, and 4R,4aS,7S,7aS diastereomers of iridomyrmecin have been prepared in 5 steps from 4aS,7S,7aR and 4aS,7S,7aS-nepetalactones, major components of catnip oil. 4S,4aS,7S,7aR and 4R,4aS,7S,7aR-iridomyrmecin have been identified as defensive compounds from Iridomyrmex ants.     

Stereoselective synthesis of all stereoisomers of vicinal and distal bis(O-2-aminoethyl)-p-tert-butylthiacalix[4]arene

O,O″- and O,O′-bis(2-aminoethyl)-p-tert-butylthiacalix[4]arenes of anti conformation have been prepared by the reduction of the corresponding O,O″- and O,O′-bis(cyanomethyl) ethers. Their syn-O,O″- and O,O′-counterparts have been prepared by alternative routes via the Mitsunobu reaction of thiacalix[4]arene with N-(2-hydroxyethyl)phthalimide and the reduction of a O,O′-disiloxanediyl-bridged O″,O?-bis(cyanomethyl) ether of 1,2-alternate conformation, respectively. These products are expected to serve as useful precursors of highly elaborated synthetic receptors, including biscalixarenes.     

Semiclassical variational study of size effects in neutral and charged jellium droplets

An analytic expression for the total energy of metallic clusters composed ofN identical atoms of valencev and with net chargeQ is obtained by means of a variational solution of the Thomas-Fermi-Weizsäcker energy density functional within the spherical jellium model. The minimum energy is given as an expansion in decreasing powers of the cluster radiusR=r _s Z ^1/3, withZ=vN andr _s the radius per electron of the bulk metal. The coefficients are obtained as functions ofr _s . Terms of volume (R ³), surface (R ²), curvature (R), constant (R ⁰), (1/R) and (1/R ²) are clearly separated in the formula, as well as the different contributions (kinetic, coulombic and exchange-correlation) to each of them. The asymptotic values (R→∞) for the work functions,W(r _s ), and surface energies σ(r _s ), are compared to analogous semiclassical and Kohn-Sham calculations of jellium-like surfaces and to the experimental values. The size dependent behaviour of chemical potentials, μ(R), electron affinities,AF(R), and ionization potentials,IP(R), are easily obtained for any kind of metallic clusters. In particular we discuss the Coulomb and quantum corrections to the coefficients β, δ in the asymptotic formulae:IP?W+β/R andAF?W+δ/R.     

Hyperfine structure and isotope shift of some even parity levels in the YbI spectrum

Using laser induced fluorescence spectroscopy the hyperfine structure of the even parity levels 4f ¹⁴6s6d ³ D ₁, 4f ¹⁴ 6s8s ³ S ₁ and 4f ¹³ 5d6s6p (7/2, 5/2)J=1,2,3 as well as of the odd parity level 4f ¹⁴ 6s6p ³ P ₂ in neutral ytterbium has been investigated. The isotope shift of the transitions 4f ¹⁴6s6p ³ P ₀ → 4f ¹⁴ 6s6p ³ D ₁ and 4f ¹⁴ 6s6p ³ P ₂ → 4f ¹⁴ 6s8s ³ S ₁, 4f ¹³ 5d6s6p (7/2, 5/2)J=1,2,3 could be measured with high accuracy. The results for the 4f ¹⁴ 6s6p ³ D ₁ level show a considerable influence of second order effects of the hyperfine interaction. The isotope shifts of the 4f ¹⁴ 6s8s ³ S ₁ and 4f ¹³ 5d6s6p (7/2, 5/2)J=1 levels indicate a possible configuration mixing for these levels.     

Theoretical and experimental analysis of the fine structure and hyperfine structure in the configurations 5p6s and 5p6p of the antimony II spectrum

From 17 transitions in the singly ionized Sb II spectrum the hyperfine structure (A andB splitting constants) of the complete excited configurations 5p6s and 5p6p were determined by means of optical interference spectroscopy. In addition, a theoretical analysis both of the fine structure and also of the hyperfine structure was carried out (in the case of 5p6p of the general typenpn′p for the first time in literature). For the 3 levels 5p6p ³ P ₁, 5p7p ³ D ₂ and 5p6p ¹ P ₁ a different classification was found and consistent values for the fine structure parameters, mixing coefficients and single electron hyperfine structure splitting parametersa _nl ^ik andb _nl ^ik were obtained. The three new determinations in Sb II of the quadrupole moment (in barn) of¹²¹Sb (Q(5p6s)=?0.55(5);Q(5p6p)=?0.57(5) from the 5p-electron andQ(5p6p)=?0.7(2) from the 6p-electron) are well agreeing with each other but differ to former values from SbI. The core polarization and isotope shift of the lines, however, are compatible with our former results in SbI.     

Numerical method of non-isothermal curve analysis by means of electrical resistance measurement during cooling

The temperature-dependence of the electrical resistance of Al-Zn 78 wt.% was measured during linear cooling of the samples in the range of eutectoidal decomposition. The resulting resistancevs. temperature curves were analysed by:

deriving the temperature-dependence of the volume fractionx(T) of theη precipitate;

fitting the theoretical functionx(T)=x _h (T)+x _c (T) following from numerical integration of the reaction rate equations for the simultaneously occurring homogeneous (H) and cellular (C) precipitation processes.

As a result, the activation energiesE _h andE _c , the JMA exponentsn _h andn _c , the rate constantsk _h andk _c , and the critical temperaturesT _o of the two processes were estimated.     

Apparent molar volumes and apparent molar heat capacities of aqueous potassium hydrogen phthalate (KHP) and potassium sodium phthalate (KNaP) at temperatures fromT = 278.15 K toT = 393.15 K at the pressure 0.35 MPa

A vibrating-tube densimeter (DMA 512P, Anton Paar, Austria) was used to investigate the densities and volumetric properties of aqueous potassium hydrogen phthalate (KHP) and potassium sodium phthalate (KNaP). Measurements were made at molalities m from (0.006 to 0.66)mol · kg ^− 1, at temperatures from 278.15 K to 368.15 K and at the pressure 0.35 MPa. The densimeter was calibrated through measurements on pure water and on 1.0 mol · kg ^− 1NaCl(aq). We also used a twin fixed-cell, power-compensation, differential-output, temperature-scanning calorimeter (NanoDSC 6100, Calorimetry Sciences Corporation, Spanish Fork, UT, U.S.A.) to measure solution heat capacities. This was accomplished by scanning temperature and comparing the heat capacities of the unknown solutions to the heat capacity of water. Apparent molar volumes V_φand apparent molar heat capacities C_{p, φ}of the solutions were calculated and fit by regression to equations that describe the surfaces (V_φ, T, m) and (C_{p, φ}, T, m). Standard state partial molar volumesV₂^o and heat capacities C_p,2^owere estimated by extrapolation to the m =  0 plane of the fitted surfaces. Previously determinedC_{p, φ} for HCl(aq) and NaCl(aq) were used to obtain (Δ_rC_{p, m}, T, m) for the proton dissociation reaction of aqueous hydrogen phthalate. This (Δ_rC_p,m, T, m) surface was created by subtracting C_p,φfor KHP(aq) and for NaCl(aq) from the sum of C_p,φfor KNaP(aq) and for HCl(aq). Surfaces representing (Δ_rH_m, T, m) and (pQ_a, T, m), where pQ_adenotes the molality equilibrium quotient, were created by integration of our (Δ_rC_p,m, T, m) surface using values for (Δ_rH_m, m) and (pK_a, m) at T =  308.15 K from the literature as integration constants.     

Kinetic model of the evaporation process of benzylbutyl phthalate from plasticized poly(vinyl chloride)

The kinetic model of the physical process of evaporation of plasticizer from plasticized PVC foils was developed from the results of isothermal thermogravimetric investigation of evaporation of benzyl-butyl phthalate in the temperature range 120-150 °C under nitrogen flow. The kinetic parameters were estimated by integral method of analysis. Mathematical modeling of the kinetic of plasticizers evaporation was performed on the basis of function c=f(T,t) and kinetic equation of evaporation −dc/dt=f(T,c₀,c(t)). The developed mathematical model was described by the general kinetic equation . The differential quotients δ(−dc/dt)/δT=f(T,c₀,c(t))=f(T,c₀,t) and δ(−dc/dt)/δc₀=f(T,c(t))=f(T,c₀,t) were performed, and mathematical definition of the changes of the evaporation rate constant with the change of temperature and the change of the initial plasticized concentration were discussed.     

Synthesis and properties of S,R-alternating octinaphthalenes

(S,R,S,R,S,R,S)- and (S,R,S,S,S,R,S)-octinaphthalenes were synthesized by oxidative coupling of (S,R,S)-quaternaphthalene, and differences due to axis chirality of (S,R,S,R,S,R,S)-, (S,R,S,S,S,R,S)-, (S,S,S,R,S,S,S)-, and (S,S,S,S,S,S,S)-octinaphthalenes were compared using the R_f values on TLC, specific optical rotations, ¹H NMR chemical shifts of the hydroxy groups, and CD spectra. A clear CD additivity was found in the Δ? values of the ¹L_a transition around 290 nm, which are proportional to the difference between the numbers of S and R binaphthalene units.     

Solid-state structure determination and solution-state NMR characterization of the (2R,4R)/(2S,4S)- and (2R,4S)/(2S,4R)-diastereomers of the agricultural fungicide propiconazole,the (2R,4S)/(2S,4R)-symmetrical triazole constitutional isomer,and a ditriazole analogue

Single-crystal X-ray diffraction analysis was used to determine the structure of a racemic diastereomer of the agricultural fungicide propiconazole [1-(2-(2,4-dichlorophenyl)-4-n-propyl-1,3-dioxolane-2-yl-methyl)-1-H-1,2,4-triazole] and of two by-products (a symmetrical 1,3,4-triazole racemic-constitutional isomer and a propiconazole ditriazole analogue). All three crystalline racemic-diastereomers had (2R,4S)/(2S,4R)-stereochemistry in which then-propyl group was observed in atrans-to-phenyl disposition. Propiconazole (2R,4S)/(2S,4R)-diastereomer gives crystals belonging to the monoclinic space group P2₁,/a, and, at 293 K,a=8.1192(3),b=18.9769(6),c=10.7137(4) å,Β=99.765(3)?,V=1626.8(1) å³, Z=4,R(F)=0.060, andR _w(F)=0.058. The constitutional isomer by-product (2R,4S)/(2S,4R)-1-(2-(2,4-dichlorophenyl)-4-n-pro-pyl-1,3-dioxolane-2-yl-methyl)-1-H-1,3,4-triazole gives crystals belonging to the monoclinic space group P2₁/n, and, at 293 K,a=11.1763(6),b=10.7716(4),c=14.5804(8) å,Β=107.445(4)?,V=1674.6(1) å³, Z=4,R(F)=0.043, andR _w(F)=0.043. The ditriazole byproduct (2R,4S)/(2S,4R)-1-(2-(2-chloro-4-(1,2,4-triazole-1-yl)phenyl)-4-n-propyl-1,3-dioxolane-2-yl-methyl)-1-H-1,2,4-triazole gives crystals belonging to the triclinic space groupP¯ 1, and, at 193 K,a=5.3329(8),b=8.3738(7),c=20.240(2) å, α=84.213(6)?,Β=87.20(1)?,γ=86.23(1)?,V=896.5(2) å³, Z=2,R(F)=0.046, andR _w(F)=0.051. The presence of both propiconazole (2R.4S)- and (2S,4R)-enantiomers enables the formation of a crystalline racemic modification, while the diastereomeric propiconazole (2R,4R)- and (2S,4S)-enantiomers are viscous oils. In the absence of its enantiomorphic partner, the propiconazole (2R,4S)- or (2S,4R)-enantiomers remain as viscous oils rather than form chiral crystals.     

Polyfluorinated arylnitrosamines

N-Methyl-, N-n-butyl-, N-t-butylperfluoroarylamines undergo nitrosation with nitrous acid to give the corresponding N-nitroso derivatives. Perfluoroaryl groups were selected from the benzene, indane, biphenyl, naphthalene and pyridine series. According to ¹H and ¹⁹F NMR spectra, N-nitroso-N-methyl derivatives of polyfluoroarenes consist of E and Z isomers with the former prevailing. The more bulky n-butyl group promotes an increase in the formation of Z isomers. Only Z isomers have been obtained from N-t-butyl derivatives of perfluorinated 4-toluidine and 4-aminopyridine. The structure of the Z isomer of N-nitroso-N-methylperfluoro-4-toluidine is confirmed by X-ray data.     

Studies towards the synthesis of (1R,2S)- and (1S,2S)-1,2-epoxy-3-hydroxypropylphosphonates and (1S,2S)- and (1R,2S)-2,3-epoxy-1-hydroxypropylphosphonates

The trans-configured fosfomycin analogue, diethyl (1S,2S)-1,2-epoxy-3-hydroxypropylphosphonate, was synthesised by the intramolecular Williamson reaction of diethyl (1S,2R)-1,3-dihydroxy-2-mesyloxypropylphosphonate. The cis-analogue was obtained as O-ethyl or O,O-diethyl (1R,2S)-1,2-epoxy-3-hydroxypropylphosphonates, when (1R,2R)-1,3-dihydroxy-2-mesyloxypropylphosphonate or its 3-O-trityl derivative were used as starting materials, respectively. The intramolecular Williamson cyclisations of diethyl (1S,2R)- and (1R,2S)-1-benzyloxy-3-hydroxy-2-mesyloxypropylphosphonates led to diethyl (1S,2S)- and (1R,2S)-2,3-epoxy-1-benzyloxypropylphosphonates, respectively, with the concomitant formation of diethyl (E)-1-benzyloxy-3-hydroxyprop-1-en-1-phosphonate. From diethyl (1S,2S)- and (1R,2S)-2,3-epoxy-1-benzyloxypropylphosphonates, enantiomerically pure diethyl (1S,2S)- and (1R,2S)-1,2-dihydroxypropylphosphonates were obtained by catalytic hydrogenation, while diethyl (1S,2S)- and (1R,2S)-3-acetamido-1,2-dihydroxypropylphosphonates were produced after epoxide ring opening with dibenzylamine, acetylation and hydrogenolysis.     

Molar excess volumes of ternary mixtures of nonelectrolytes

Molar excess volumes V^E_ijk of methylenebromide i + pyridine j + β-picoline (k, cyclohexane (i) + pyridine (j) + β-picoline(K), benzene(i)+toluene(j)+1,2-dichloroethane(k), benzene(i) + 0-xylene(j) + 1,2-dichloroethane(k) and benzene(i) + p-xylene(j) + 1,2-dichloroethane(k) mixtures have been determined dilatometrically at 298.15 K. The data have been examined in terms of Sanchez and Lacombe theory and the graph-theoretical approach, and it is found that they are described well by the latter. Self- and cross-volume interaction coefficients V_jk, V_jjk and V_jkk, etc., have also been evaluated and the values utilised to study molecular interactions between the jth and kth molecular species in the presence of the ith in these i + j + k mixtures.     

Fine structure of the 1s5f and 1s5g levels of He I

The fine structure of the 1s5f and 1s5g levels of He I was measured using microwave spectroscopy. The helium atoms were excited by ion impact, and the eleven allowed 1s5f ^2S+1 F _J –1s5g ^2S′+1 G _J , transitions near ν≈15 GHz were induced and detected by measuring the 1s4d–1s2p or 1s3d–1s2p spectral-line intensities of the impact radiation as a function of the microwave frequency. The measured transition frequencies are in accord with theoretical values and, except for one transition frequency, with earlier experimental data. The existing discrepancy between these earlier data and theory could be solved.     

Fluorsilylsubstituierte N,N- und N,O-bis(trimethylsilyl)-hydroxylamine

Fluoro- und aminofluoro-silanes react with the lithium salt of N,O-bis(trimethylsilyl)hydroxylamine under LiF elimination and substitution. Alkyl- and amino-fluorosilanes give O-fluorosilyl-N,N-bis(trimethylsilyl)hydroxylamines, arylfluorosilanes give N-fluorosilyl-N,O-bis(trimethylsilyl)hydroxylamines. By the further reaction of O-difluorosilyl-N,N-bis(trimethylsilyl)hydroxylamine with the lithiated hydroxylamine, O,O′-fluoromethylsilyldi[N,N-bis(trimethylsilyl)hydroxylamine] is formed. On heating N-difluorophenylsilyl-N,O-bis(trimethylsilyl)hydroxylamine di[fluorophenylsilyl(methyl)amino]pentamethylsiloxane is formed by methyl group migration. The NMR and mass spectra of the compounds are reported.     

Antibacterial activity of N-quaternary chitosan derivatives: Synthesis, characterization and structure activity relationship (SAR) investigations

Quaternary N-(2-(N,N,N-tri-alkyl ammoniumyl and 2-pyridiniumyl) acetyl) derivatives of chitosan polymer, chitooligomer, and glucosamine (monomer) were synthesized for the purpose of investigating the structure activity relationship (SAR) for the antibacterial effect. Novel methods were used in the synthesis. The final chitosan and chitooligomer derivatives could thus be obtained in two steps without prior protection of the hydroxyl groups. However, in order to obtain chitosan derivatives with the bulky N,N-dimethyl-N-dodecyl- and N,N-dimethyl-N-butyl side chains three steps were needed, starting from 3,6-O-di-tert-butyldimethylsilyl chitosan (3,6-O-di-TBDMS chitosan) as the key intermediate. The quaternary ammoniumyl acetyl derivatives of glucosamine were synthesized from glucosamine or tetra-O-acetylglucosamine. N,N,N-trimethyl chitosan (TMC) was used as reference compound for investigation of antibacterial activity. Clinical Laboratory Standard Institute (CLSI) protocols were used to determine MIC and MLC for activity against clinically important Gram-positive strains Staphylococcus aureus (ATCC 25923), and S. aureus (MRSA) (ATCC 43300), and Gram-negative strains of Escherichia coli (ATCC 25922), P. aeriginosa (ATCC 27853) and Enterococcus facialis (ATCC 29212). The MIC values for the compounds ranged from 8 to ?8192 mg/L. In general the N-(2-(N,N-dimethyl-N-dodecyl ammoniumyl) acetyl) derivatives of chitooligomer and glucosamine monomer were more active against bacteria than derivatives with shorter alkyl chains. In contrast the N-(2-(N,N-dimethyl-N-dodecyl ammoniumyl) acetyl) derivatives of chitosan were less active than derivatives with N-(2-N,N,N-trimetylammoniumyl) acetyl or N-(2-(N-pyridiniumyl) acetyl) quaternary moiety. N,N,N-trimethyl chitosan (TMC) was the most active compound in this study.     

Conversion-time curves in the diffusion-controlled free radical polymerization of styrene

In order to calculate conversion-time curve in radical polymerization, the termination rate constant for interacting polymer radicals with chain lengths n and s is written as: k_t,ns = k(ζ_n + ζ_s) where k ∝ exp(−0.40/v_f) (v_f: free volume), and ζ = 1 at n ⩽ n_c and ζ = (n_c/n)^1,5 at n ⩾ n_c + 1 (n_c: a critical chain length of polymer moving by reptation). The curves are applicable to the experimental data obtained from 20°C to 154°C in the thermal polymerization of styrene. Further, it is shown that the curves can be applied to the experimental data for polymerization in the presence of initiator.