Fractionation analysis of iodine in bovine milk by preconcentration neutron activation analysis

Iodine is an essential trace element for human beings. The main source of iodine is generally food items such as fish and milk. Either the lack or the excess of iodine can cause health problems. There exists an increasing interest in the determination of total iodine as well as various species of iodine in milk. We have developed an epithermal neutron activation analysis method with a Compton suppression (ENAA-CS) counting system for the determination of ng mL⁻¹ levels of iodine. We have also employed chemical separation methods prior to ENAA-CS to measure the fraction-specific concentrations of iodine in bovine milk. We have measured the following iodine concentrations in homogenized milk (3.25%milk fat): 0.48 ± 0.02 μg mL⁻¹ of total iodine, 0.020 ± 0.003 μg mL⁻¹ of lipid-bound iodine, 0.039 ± 0.002, 0.019 ± 0.002 and 0.021 ± 0.004 μg mL⁻¹ of protein-bound iodine depending on the protein separation method and 0.45 ± 0.02 μg mL⁻¹ of inorganic species.     

Microwave-assisted alkaline digestion combined with microwave-assisted distillation for the determination of iodide and total iodine in edible seaweed by catalytic spectrophotometry

Microwave energy has been novelty applied to speed up a tetramethylammonium hydroxide (TMAH) alkaline digestion of seaweed samples and to assist distillation of iodine from seaweed alkaline digests. Iodide in the alkaline digests from seaweed and distilled iodine, reduced back to iodine in a hydroxylamine hydrochloride solution, was determined by a catalytic spectrophotometric method based on the catalytic effect of iodide on the oxidation of As(III) by Ce(IV) in H₂SO₄/HCl medium (Sandell-Kolthoff reaction). The determination of iodide was directly performed in the alkaline digests, while total iodine was assessed by analyzing the hydroxylamine hydrochloride solution after the distillation process. Microwave-assisted alkaline digestion was performed using 7.5 mL of TMAH and irradiating samples at 670 W for two 5.5 min steps. Microwave-assisted distillation was carried out using 4.0 mL of the alkaline digest and 3 mL of a 2.2 M hydrochloric acid and 0.05% (m/v) sodium nitrite solution, with a microwave power at 670 W for two 90 s steps. The distillate (iodine vapor) was bubbled in 10 mL of a 500 μg mL⁻¹ hydroxylamine hydrochloride solution (accepting solution). The linear calibration ranges were 0.30-20.0 and 0.40-20.0 μg L⁻¹ for iodide determination and total iodine determination, respectively. The limit of detection was 9.2 μg g⁻¹ for iodide and 28.5 μg g⁻¹ for total iodine. Repeatability of the overall procedures, expressed as R.S.D. for 11 determinations, was 2.6% for 196.3 μg g⁻¹ of iodide measured after microwave-assisted alkaline digestion, and 5.8% for 954.3 μg g⁻¹ of total iodine by microwave-assisted alkaline digestion followed by microwave-assisted distillation. Finally, accuracy of the methods was assessed by analyzing the NIST-09 (Sargasso) certified reference material and the methods were applied to the determination of iodide and total iodine in different Atlantic edible seaweed samples with satisfactory results.     

Highly diastereoselective allylation of lactols and their ethers using molecular iodine

Lactols and their ethers undergo smooth allylation with allyltrimethylsilane in the presence of 5 mol % iodine in dichloromethane at −78 °C to afford C-allylfuranosides in good yields and with high diastereoselectivity. The use of iodine makes this method simple, convenient and practical. This is the first report on the allylation of lactols with allyltrimethylsilane using molecular iodine as a catalyst. Enhanced diastereoselectivity is the key feature of this protocol.     

Spectrophotometric analysis of iodide oxidation by chlorine in highly mineralized solutions

A spectrophotometric method for determining the concentrations of various iodine compounds (I⁻: initial compound, I₃⁻: under-oxidized iodine form, I₂ and I₂Cl⁻: target iodine forms and ICl₂⁻: over-oxidized iodine form) in their joint presence has been developed in order to study iodine processing from underground brines in Turkmenistan which are characterized by considerably higher mineralization and lower iodide content compared than those in Japan and USA. It was found that solutions with constant iodine concentrations and variable chloride concentrations had an isosbestic point at 474 nm with a molar absorbtivity of I₂ plus I₂Cl⁻ of 610.2 l mol⁻¹ cm⁻¹, while the absorbance of other iodine forms at this wavelength was negligible. This allowed us to use an absorbance at 474 nm for calculating the iodine concentration in solutions of variable chloride concentration. For calculating concentrations of other iodine compounds, absorbances at other wavelengths were used: 225 nm (I⁻ and ICl₂⁻), 248 nm (I₂Cl⁻) and 350 nm (I₃⁻). Beer’s law was valid for all iodine compounds in solutions with constant salt concentrations at all wavelengths. The authors have also developed a detailed algorithm for calculating the concentrations of the various iodine forms in their joint presence. The method was applied to solutions with various chloride concentrations and additions of microcomponents of natural solutions (bromide and iron ions, naphthenic acid and hydrogen sulfide). The overall precision for calculating the concentrations of various iodine compounds was <5% for solutions with an oxidant excess of <2-fold, and with chloride concentrations of <5 mol l⁻¹.     

Iodine and creatinine testing in urine dried on filter paper

Iodine deficiency is a world-wide health problem. A simple, convenient, and inexpensive method to monitor urine iodine levels would have enormous benefit in determining an individual's recent iodine intake or in identifying populations at risk for iodine deficiency or excess. Current methods used to monitor iodine levels require collection of a large volume of urine and its transport to a testing laboratory, both of which are inconvenient and impractical in parts of the world lacking refrigerated storage and transportation. To circumvent these limitations we developed and validated methods to collect and measure iodine and creatinine in urine dried on filter paper strips. We tested liquid urine and liquid-extracted dried urine for iodine and creatinine in a 96-well format using Sandell–Kolthoff and Jaffe reactions, respectively. Our modified dried urine iodine and creatinine assays correlated well with established liquid urine methods (iodine: R² = 0.9483; creatinine: R² = 0.9782). Results demonstrate that the dried urine iodine and creatinine assays are ideal for testing the iodine status of individuals and for wide scale application in iodine screening programs.     

Headspace single-drop microextraction coupled to microvolume UV-vis spectrophotometry for iodine determination

Headspace single-drop microextraction has been combined with microvolume UV-vis spectrophotometry for iodine determination. Matrix separation and preconcentration of iodide following in situ volatile iodine generation and extraction into a microdrop of N,N′-dimethylformamide is performed. An exhaustive characterization of the microextraction system and the experimental variables affecting iodine generation from iodide was carried out. The procedure employed consisted of exposing 2.5 μL of N,N′-dimethylformamide to the headspace of a 10 mL acidic (H₂SO₄ 2 mol L⁻¹) aqueous solution containing 1.7 mol L⁻¹ Na₂SO₄ for 7 min. Addition of 1 mL of H₂O₂ 1 mol L⁻¹ for in situ iodine generation was performed. The limit of detection was determined as 0.69 μg L⁻¹. The repeatability, expressed as relative standard deviation, was 4.7% (n = 6). The calibration working range was from 5 to 200 μg L⁻¹ (r² = 0.9991). The large preconcentration factor obtained, ca. 623 in only 7 min, compensate for the 10-fold loss in sensitivity caused by the decreased optical path, which results in improved detection limits as compared to spectrophotometric measurements carried out with conventional sample cells. The method was successfully applied to the determination of iodine in water, pharmaceutical and food samples.     

Conjugated carbazole dimer as fluorescence carrier for preparation of iodine-sensitive chemical sensor

The carbazole derivative, 9-ethyl-3-carbazylidene carbazole hydrazone (ECCH) with two conjugated carbazole rings have been applied as a fluorescence carrier for preparation of an iodine sensitive optical chemical sensor. The response of the sensor is based on quenching of the fluorescence of ECCH by iodine. The conjugated carbazole dimer based sensor shows a linear response toward iodine in the concentration range 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹, with a detection limit of 8.0 × 10⁻⁷ mol L⁻¹ at pH of 7.0. The effect of composition of the sensor membrane was studied, and the experimental conditions were optimized. Most commonly coexisting ions do not interfer with the iodine assay. The sensor shows sufficient repeatability, selectivity, operational lifetime of two months and a fast response of less then 50 s. The sensor has been used for determination of iodine in water samples.     

Iodine-catalyzed intermolecular hydroamination of vinyl arenes

The vinyl arenes undergo smooth hydroamination with sulfonamides in the presence of 10 mol % of iodine to furnish tosyl and mesyl-protected secondary amines in excellent yields in short reaction times. The use of inexpensive and readily available molecular iodine makes this method quite simple, more convenient, and practical.     

The first example of alkynylation of propargylic alcohols with alkynylsilanes catalyzed by molecular iodine

Aryl propargyl alcohols undergo smooth alkynylation with alkynylsilanes in the presence of 10 mol % of iodine under mild and neutral conditions to produce 1,4-diynes in excellent yields with high selectivity. The use of readily available molecular iodine makes this method simple, convenient, cost-effective and practical.     

Flow injection system with in-line Winkler's procedure using 16-way valve and spectrofluorimetric determination of dissolved oxygen in environmental waters

Flow injection spectrofluorimetry with in-line Winklers procedure was developed for the dissolved oxygen (DO) determination. 2-Thionaphthol reacted with iodine produced by Winkler’s method to form fluorescence inactive disulfide compound. To automate the process completely, a 5-channel flow system with a newly designed 16-way valve was assembled. The system consisted of a dispersion coil (DC), a precipitate formation coil (PFC), a precipitate dissolving coil (PDC), and extraction coil (EC). A calibration can be constructed by using a standard iodine solution for dissolved oxygen. The calibration graph was linear over the range 1.2×10⁻⁴∼6.0×10⁻⁴ mol l⁻¹ iodine (1.96∼9.80 mg O l⁻¹)). The relative standard deviation (n=6) was below 0.3% for the 4×10⁻⁴ mol l⁻¹ iodine (6.27 mg O l⁻¹) determination. The sample throughput was 12/h.     

Iodine-catalyzed 1,4-addition of 2-(trimethylsilyloxy)furan to α,β-unsaturated ketones: a facile synthesis of γ-butenolides

The α,β-unsaturated compounds undergo smooth conjugate addition with 2-(trimethylsilyloxy)furan (TMSF) in the presence of 10 mol % of iodine under mild and neutral conditions to afford the corresponding γ-substituted butenolides in high yields and with good diastereoselectivity. The use of iodine makes this procedure simple, convenient and cost effective.     

New fluorinated polymers bearing pendant phosphonic groups for fuel cell membranes: Part 1 synthesis and characterizations of the fluorinated polymeric backbone

Radical copolymerizations of chlorotrifluoroethylene (CTFE) with vinyl ethers such as 2-chloroethyl vinyl ether (CEVE) and ethyl vinyl ether (EVE) were performed at 75 °C in the presence of peroxide initiator. Three copolymers were obtained and characterized by means of both NMR and elemental analysis. Then, the chlorine atoms in the side chains were converted into iodine atoms by nucleophilic substitution, which was monitored by ¹H NMR spectroscopy. A series of five copolymers with different amounts of iodine atoms in the side chains were thus obtained. These copolymers exhibited molecular weight values of about 25,000 g mol⁻¹, and the thermal analysis of the copolymers showed a starting degradation from about 220 °C. The T_g values were in the range of 34-41 °C and showed a linear dependence versus the content of iodine atoms.     

Iodine/Et3SiH: a novel reagent system for the synthesis of 3-aryl-1H-indenes from 1,3-diaryl propargyl alcohols

1,3-Diaryl propargyl alcohols undergo smooth intramolecular Friedel-Crafts cyclization with triethylsilane in the presence of 10 mol % iodine 3-aryl-1H-indene derivatives in good yields in short reaction times. This is the first example on the synthesis of substituted indenes from 1,3-diaryl propargyl alcohols. The use of inexpensive and readily available molecular iodine makes this method quite simple, more convenient, and practical.     

Pervaporation-flow injection with chemiluminescence detection for determination of iodide in multivitamin tablets

This paper describes the use of a pervaporation (PV) technique in a flow injection (FI) system for selective improvement in iodide analysis. Iodide in the sample zone is oxidized to iodine, which permeates through a hydrophobic membrane. Detection of the diffused iodine is achieved using the chemiluminescent (CL) emission at 425 nm that results from the reaction between iodine and luminol. The method was applied for the analysis of some pharmaceutical products, such as nuclear emergency tablets and multivitamin tablets. Ascorbic acid present in multivitamin samples interfered seriously with the analysis, and off-line sample treatment using anion exchange resin was employed to successfully remove ascorbic acid before the analysis. Ascorbic acid was flushed from the column using 0.4 M sodium nitrate followed by elution of iodide with 2 M sodium nitrate. The detection limit (3S.D.) of the system was 0.5 mg l⁻¹, with reproducibility of 5.2% R.S.D. at 5 mg l⁻¹. Sample throughput was determined as 30 injections h⁻¹. There was good agreement between iodide concentrations from extracted samples determined using four different methods, i.e., PV-FI, gas diffusion-flow injection, potentiometry and ICP-MS. A comparison of the analytical features of the developed pervaporation system with these of the previously reported chemiluminescence gas diffusion-flow injection previously reported is also described.     

Iodine as a mild and efficient catalyst for the diastereoselective synthesis of δ-silyloxy-γ-lactones

Aldehydes undergo smooth nucleophilic addition with 2-trimethylsilyloxyfuran in the presence of 10 mol % of iodine under mild and neutral conditions to produce the corresponding δ-silyloxy-α,β-unsaturated-γ-lactones in high yields and with moderate diastereoselectivity. ortho-Substituted benzaldehydes afford the syn-isomer predominantly. The use of iodine makes this procedure quite simple, more convenient and cost-effective.     

The potential of Raman spectroscopy for characterisation of the fatty acid unsaturation of salmon

Raman spectroscopy has been evaluated for characterisation of the degree of fatty acid unsaturation (iodine value) of salmon (Salmo salar). The Norwegian Quality Cuts from 50 salmon samples were obtained, and the samples provided an iodine value range of 147.8-170.0 g I₂/100 g fat, reflecting a normal variation of farmed salmon. Raman measurements were performed both on different spots of the intact salmon muscle, on ground salmon samples as well as on oil extracts, and partial least squares regression (PLSR) was utilised for calibration. The oil spectra provided better iodine value predictions than the other data sets, and a correlation coefficient of 0.87 with a root mean square error of cross-validation of 2.5 g I₂/100 g fat was achieved using only one PLSR component. The ground samples provided comparable results, but at least two PLSR components were needed. Higher prediction errors were obtained from Raman spectra of intact salmon muscle, and this may partly be explained by sampling uncertainties in the relation between Raman measurements and reference analysis. All PLSR models obtained were based on chemically sound regression coefficients, and thus information regarding fatty acid unsaturation is readily available from Raman spectra even in systems with high contents of protein and water. The accuracy, the robustness and the low complexity of the PLSR models obtained suggest Raman spectroscopy as a promising method for rapid in-process control of the degree of unsaturation in salmon samples.     

A simple indirect automatic method to determine total iodine in milk products by flame atomic absorption spectrometry

A simple, precise and accurate automatic method for the determination of total iodine in milk products by indirect atomic absorption spectrometry is proposed. Iodide in solutions resulting from alkaline ashing of samples is precipitated with silver ion in a precipitation-dissolution flow manifold, which allows performing on-line the retention of the silver iodide precipitate formed on a filter, its wash with diluted ammonia and its dissolution with a diluted thiosulfate solution. Dissolved silver is also determined on-line by flame atomic absorption, and the achieved amount of this metal is proportional to that of iodine in the sample. The proposed method is very selective, avoids interferences from anions present in the samples, which can be also precipitated with silver, because these silver compounds are dissolved with ammonia at the washing step. This method allows the determination of iodine in the range 0.011-0.35 μg mL⁻¹ with a relative standard deviation between 1.3 and 6.8% at a rate of ca. 17 samples h⁻¹.     

Iodine-catalyzed Michael addition of mercaptans to α,β-unsaturated ketones under solvent-free conditions

A simple and efficient method for the Michael reaction between various mercaptans and α,β-unsaturated ketones using a catalytic amount of iodine (5 mol %) to generate the 1,4-adduct has been reported. The significant features of the iodine catalyzed Michael addition are (a) operational simplicity, (b) inexpensive reagents, (c) high yields of products, (d) the use of relatively low or nontoxic reagents and (e) solvent-free conditions.     

Iodine-catalyzed one-pot three-component synthesis of homoallyl benzyl ethers from aldehydes

Iodine has been found to be an effective catalyst for one-pot synthesis of homoallyl benzyl ethers under mild reaction conditions. Various homoallyl benzyl ethers were synthesized in moderate to high yield by three-component condensation of aldehydes, benzyloxytrimethylsilane, and allyltrimethylsilane in presence of iodine (10 mol %) in dichloromethane at 0 °C.     

Liquid-phase microextraction and GC for the determination of primary, secondary and tertiary aromatic amines as their iodo-derivatives

Presence of iodine in aromatic amines, introduced by their reaction with iodine, and other electron withdrawing substituents such as chlorine and nitro, has been found to afford excellent liquid-phase microextraction (LPME) in toluene and separation by gas chromatography in the determination of primary, secondary and tertiary aromatic amines. The effect is due to decreased basic nature of amines when electronegative substituents are present. Single drop microextraction (SDME) of the amines in 2 μl of toluene and injection of the whole extract into GC, or LPME into 50 μl of toluene and injection of 2 μl of extract, were used. LPME has been found more robust and to give better extraction in shorter period than SDME. In SDME-GC-FID, the average correlation coefficient was 0.9939 and average limit of detection 25 μg l⁻¹ (range 12-61 μg l⁻¹) whereas the corresponding values in LPME-GC-MS were, respectively, 0.9953 and 33 ng l⁻¹ (range 18-60 ng l⁻¹). The method has been applied to determine aromatic amines in river water, dye factory effluents and food dye stuffs. The LPME was found as robust, rugged and simple extraction method.