NAD(P)H辅酶模型物结构与反应性关系的研究──3-位酰基的电子效应

合成了一系列3酰胺基氮取代的NAD(P)H模型物,测定了其与5硝基异喹啉正离子的二级反应速率常数,并与模型物的氧化还原电势进行了比较.实验结果表明,模型物3位酰基氧一方面可离域二氢吡啶环上N的电子;另一方面负电性的3位酰基氧在反应过渡态中又可引起分子内和分子间的两种静电作用;3位酰基的电子效应对模型物动力学反应性的影响是这两种效应综合作用的结果.     

小波包分析用于重叠分析化学信号的处理

对小波包分析的算法进行了改进,并将此算法成功地应用于多组分重叠色谱信号的解析.结果表明,本文提出的算法解决了MRSD算法的不足,更适合处理分析化学信号,用于重叠信号的解析时不需重构(逆变换),简化了数据处理步骤,加快了数据解析速度,具有较强的解析能力.对于重叠色谱信号的解析,小波包分析比小波分析具有更强的解析能力.     

Surface forces with adsorbed polymers: Direct measurements and model calculations

We Have Measured Directly The Forces Between Two Smooth Solid Surfaces Immersed In Liquid Media In The Range Of Surface Separation 0 ∼ 2000Å. By Measuring The Interactions Both With And Without Polymers Adsorbed Onto The Surfaces From The Solution, We Could Characterize The Effects Due To The Adsorbed Polymers Themselves. This Has Been Done For Several Model Polymer Systems In A Wide Range Of Solvency Conditions: Poor-, Theta- And Good Solvents, As Well As For Charged Polymers In Ionic Media. The Present Paper Describes Two Recent Studies Of Adsorbed Polymers In Theta-Solvent And Good Solvent Conditions, And The Effect Of Polymer Bridging At Low Adsorbance Values. The Experimental Studies Are Extremely Direct, And Can Be Compared With Molecular Models: We Briefly Describe Such A Detailed Comparison For The Case Of Interaction Between Adsorbed Polymer Layers In A poor solvent.     

渣油在加氢处理中的性质和结构变化规律研究

利用渣油加氢处理中试装置,获得了经过脱金属催化剂、脱硫催化剂和脱氮催化剂的系列渣油加氢处理产物,分析了各产物的性质。随加氢深度增加,硫、氮、残炭、镍和钒在渣油加氢产物中的的质量分数降低,总脱除率分别为84.9%、51.3%、62.8%、84.8%和94.0%。各产物的组分分布发生变化,饱和分组分增加,芳香分、胶质、沥青质组分减少,重组分胶质和沥青质组分的转化分别达到了57.5%和73.3%。以核磁共振为基础计算了渣油加氢产物组分的平均结构参数。结果表明,芳香分和胶质组分单元结构芳香环数和环烷环数减少,芳香碳分率fA、环烷碳分率fN和烷基碳分率fP变化不明显;而沥青质分子fA增加,fN和fP降低。从平均结构参数还可以看出,不同加氢产物同一种组分在结构上有其共性,但不同组分有明显区别。     

Study on the Cracking Mechanism of 1,1,2-Trichloro-1,2,2-trimethyldisilane Catalyzed by Aluminum Chloride

The cracking mechanism of 1,1,2-trichloro-l,2,2-trimethyldisilane catalyzed by aluminum chloride is investigated by DFT and MP2 methods. The reactants decompose in two ways, which are competing response. The reaction pathways are both by three steps. And the two reaction channels were both exothermic reaction. The heat of the overall reaction was –293.372 kJ·mol-1. The rate determining steps are the third and first steps, respectively. The Standard Gibbs Free Energy Change is the same, –297.55 kJ·mol-1. The Standard Equilibrium Constant is 1.354 × 1052. The theoretical productivity is high under normal temperature and pressure. The theoretical results agreed well with the experimental data.     

有机锡化合物为中性载体的高选择性硫氰酸根离子电极

使用硫氰化银与硫化银作膜活性物质的固态硫氰酸根离子选择电极,由于受卤素离子如Cl^-、Br^-和I^-干扰很大而限制了应用.以钴(Ⅲ)卟啉或维生素B₁₂衍生物为载体的电极对SCN^-有较高的选择性^[1,2],使SCN-选择电极得到了较大的发展.     

电感耦合等离子体原子发射光谱法测定钛合金中钨、铌、钽

采用电感耦合等离子体原子发射光谱法（ICP-AES）法测定钛合金中W,Nb,Ta元素的含量。样品采用盐酸、氢氟酸和硝酸溶解,并对仪器工作参数和试验条件进行了优化试验,确定了仪器最佳工作条件,考察了钛合金基体和共存元素对待测元素的影响,确定了各待测元素谱线为W207．911nm,Nb309．418nm,Ta240．063nm。选定的待测元素分析线不受合金基体和共存元素的干扰,通过基体匹配消除基体的影响。加标回收率在98％104％之间,测定结果的相对标准偏差为0．3％～2．4％（n=8）,方法的检出限为0．003-0．013μg／mL。进行了标准物质对照试验,试验结果与标准值相符。     

松香改性酚醛环氧树脂的合成与表征

以松香,环氧氯丙烷,甲醛及苯酚等为主要原料,合成了一种新型的环氧树脂。通过正交实验法确定了环氧化反应的最佳实验条件,即环氧化温度90℃,碱用量13 g,催化剂为cat 1,其最佳用量为0.018 mol,环氧氯丙烷的用量为50 g,碱浓度为30%(以上数值均以松香用量为70 g时计)。在最佳实验条件下合成得到了松香改性酚醛环氧树脂(简称RAPE),并用HPLC、FT-IR、NMR对其进行结构表征。结果表明,得到的RAPE其环氧值为0.28 mol/100g,平均聚合度约为3.4,酚羟基和树脂酸上的羧基基本反应完全,得到一种新型的缩水甘油醚型和缩水甘油酯型的环氧树脂。     

大口径毛细管气相色谱法测定罂粟壳中的生物碱

摘要：采用超声提取大口径毛细管气相色谱法同时测定罂粟壳中可待因、吗啡、蒂巴因、罂粟碱和那可汀的质量比,用HP-1（5m×0.53mm×2.65μm）毛细管柱,GC-FID测定,结果表明,可待因、吗啡、蒂巴因、罂粟碱和那可汀的平均回收率分别为94.0％,96.5％,93.8％,91.0％,91.4％,RSD=0.92％～2.75％。     

二氧化硅/聚苯乙烯复合微球的制备及作为固相萃取填料的研究

以分散聚合法制备了二氧化硅/聚苯乙烯单分散复合微球,以红外光谱、透射电镜(TEM)、扫描电镜(SEM)等手段对其进行了表征。以合成的二氧化硅/聚苯乙烯作为固相萃取填料制作固相萃取小柱。通过固相萃取与液相色谱联用,测定了水中邻硝基酚、间硝基酚、对硝基酚和辛基酚、壬基酚,考察了固相萃取条件对固相萃取柱性能的影响,选择了最佳的色谱分离条件。结果表明,自制固相萃取小柱对水中硝基酚、烷基酚的萃取率高,与HPLC联用测定结果重现性好,邻硝基酚、间硝基酚、对硝基酚、辛基酚、壬基酚的最低检出限分别为0.90、0.72、0.62、0.38和0.41μg/L。     

脉冲不分流进样气相色谱-质谱法分析血浆中的10种镇静催眠药

采用脉冲不分流进样技术建立了血浆中10种镇静催眠药(巴比妥、异戊巴比妥、苯巴比妥、奥沙西泮、地西泮、硝西泮、氯硝西泮、艾司唑仑、阿普唑仑、三唑仑)的气相色谱-质谱(GC-MS)快速定性定量分析方法.血浆样品经0.1 mol/L 氢氧化钠溶液碱化后,用乙酸乙酯萃取;萃取液经氮气吹干,用乙酸乙酯溶解后进行GC-MS分析,所...     

水中氟化物国际标准检验方法的验证及其比较

介绍水中氟化物国际标准检验方法的验证结果,其中包括了干扰实验、标准曲线、准确度、精密度、检出限等.并将本方法测定结果与国标同类方法进行了比较.结果表明,该方法抗干扰性好,测量精度高,其标准曲线范围宽,点数设计合理,优于国标中的同类方法.应加以采纳和推广.     

Use of oxide minerals to abate fluoride from water

The removal of fluoride from aqueous solutions has been investigated using various oxide ores such as refractory grade bauxite, feed bauxite, manganese ore, and hydrated oxides of manganese ores (WAD). The refractory grade bauxite showed promising results. The studies were carried out as functions of contact time, pH, concentration of adsorbents, concentration of adsorbate, and temperature. The adsorption was rapid during the initial 5 min but equilibrium was attained within 120 min. The adsorption followed first-order kinetics. The present system followed the Langmuir adsorption isotherm model. Various thermodynamic parameters such as free energy, enthalpy, entropy, and equilibrium constants were calculated. The isosteric heat calculations showed that the adsorption process followed a heterogeneous model.     

质子型离子液体N,N-二甲基乙醇胺丙酸盐的密度、粘度及电导率

在283.15-333.15 K温度范围内, 测量了质子型离子液体N,N-二甲基乙醇胺丙酸盐(DMEOAP)的密度、粘度及电导率. 讨论了温度对密度、粘度和电导率等物理化学参数的影响. 通过经验和半经验方程得到了该离子液体的热膨胀系数、分子体积、标准摩尔熵及晶格能等热力学性质参数. 由电导率和密度计算出了该离子液体的摩尔电导率. 利用Vogel-Fulcher-Tamman (VFT)方程, 将测量的动力粘度和电导率对温度拟合, 得到了动力粘度和电导率随温度变化方程式.并通过Walden规则, 建立了粘度与摩尔电导率之间的联系.     

The Direct catalytic asymmetric cross-Mannich reaction: a highly enantioselective route to 3-amino alcohols and alpha-amino acid derivatives

The first proline-catalyzed direct catalytic asymmetric one-pot, three-component cross-Mannich reaction has been developed. The highly chemoselective reactions between two different unmodified aldehydes and one aromatic amine are new routes to 3-amino aldehydes with dr>19:1 and up to >99 % ee. The asymmetric cross-Mannich reactions are highly syn-selective and in several cases the two new carbon centers are formed with absolute stereocontrol. The reaction does not display nonlinear effects and therefore only one proline molecule is involved in the transition state. The reaction was also catalyzed with good selectivity by other proline derivatives. The Mannich products were converted into 3-amino alcohols and 2-aminobutane-1,4-diols with up to >99 % ee. The first one-pot, three-component, direct catalytic asymmetric cross-Mannich reactions between unmodified aldehydes, p-anisidine, and ethyl glyoxylate have been developed. The novel cross-Mannich reaction furnishes either enantiomer of unnatural alpha-amino acid derivatives in high yield and up to >99 % ee. The one-pot, three-component, direct catalytic asymmetric reactions were readily scaled up, operationally simple, and conductible in environmentally benign and wet solvents. The mechanism and stereochemistry of the proline-catalyzed, one-pot, three-component, asymmetric cross-Mannich reaction are also discussed.     

光电发射光谱法分析钛合金中的主要合金元素

依据光电发射光谱仪光源激发机理,结合钛合金的材料性能,选用火花放电激励光源和时间分解脉冲分布测光法,绘制钛合金中主要合金元素的工作曲线,对A l、V、Fe、S i、C、Mn、Cu、Mo、Sn、Zr、N i、Cr等元素进行光谱直接测定。测定结果与化学法测定结果基本一致,测定结果的相对标准偏差为0.72%~4.27%(n=11)。     

Co/ZrO2催化剂的结构及TPR性能研究

采用XRD和TPR技术研究了CoZrO体系催化剂的物相结构及还原性能,并以CO氧化反应为探针考察了催化剂的氧化活性.结果表明,钴的存在会阻止tZrO₂→混合相→mZrO₂的转变和ZrO₂颗粒的增长;高温焙烧后,部分钴氧化物与载体ZrO₂形成固溶体.Co/ZrO₂催化剂中的钴以Co₃O₄的形式存在,钴锆之间的相互作用有利于钴的分散.随着Co负载量增加,催化剂的CO氧化活性提高.     

Explicit finite difference simulations for accelerating cross diffusion flow over a perpendicular shield with parabolic motion

The heat transfer phenomenon subject to thermos-diffusion effects convey important applications in the heating processes, extrusion systems, chemical processes and various engineering systems. The objective of current work is to observe the contribution of Soret and Dufour effects in oscillating shield for cross diffusion flow. The perpendicular shield with oscillating motion induced the flow. The magnitude of oscillations is assumed to be small so that laminar flow due to oscillating shield has been resulted. The motivations for addressing the thermos-diffusion phenomenon due to oscillating of shield are due to applications in oscillatory pumps, moving surface, metal detectors, power systems etc. The dimensionless problem is obtained via introducing the appropriate set of variables. The numerical outcomes are suggested by using the most interesting explicit finite difference scheme. The physical illustration for flow parameters is presented. Moreover, the aspect of physical quantities involving the flow are graphically reported.     

Effect of Bee Pollen on the Mechanical and Thermal Properties of Starch Films

The use of casein, starch and bee pollen as biodegradable materials has been promise. The objective of this work was the development and characterization of films containing casein, pollen and starch. The films were obtained by casting process and the solvent evaporation was performed at 40 °C/24 h. The films characterization was carried out by microscopy, thermal analysis, opacity test, mechanical properties and barrier methods. The starch films presented heterogeneous on microscopy analysis. The thermal behaviors of pollen films were similar. The formulation containing only pollen 3% was unable to form film. The introduction of pollen in starch film formulation improved the mechanical characteristic and thermal stability of films.     

Three types of reactions with intramolecular five-membered ring compounds in organic synthesis

There are three types of reactions with intramolecular five-membered ring compounds in organic syntheses: The first type is reactions involving intramolecular five-membered ring compounds which are utilized for the ease of synthesis of these compounds and the stability of the products. The second is reactions performed via intramolecular five-membered ring intermediates, because such intermediates are very reactive and labile compounds. The third is the metal-catalyzed reactions with the intramolecular five-membered ring compounds because these metal compounds have catalytic activities. The third type reactions involving intramolecular five-membered ring pincer compounds are also provided.The first type reactions include carbonylations, alkenylations, alkynylations, acylations, isocyanations, Diels-Alder reactions, etc. The second type reactions include carbonylations, cross-coupling reactions, hydroacylations, ring expansion reactions, carbocyclizations, etc. The third type reactions include cross-coupling reactions, rearrangements, metatheses, reductions, Michael reactions, dehydrogenations, Diels-Alder reactions, etc.