A NMR, X-ray, and DFT combined study on the regio-chemistry of nucleophilic addition to platinum(II) coordinated terminal olefins

The series of platinum complexes [PtCl(η²-CH₂CH-C₆H₄-X)(tmeda)](ClO₄) (X = H, 1b; 4-OMe, 1c; 3-OMe, 1d; 4-CF₃, 1e; 3-CF₃, 1f; 3-NO₂, 1g; tmeda = N,N,N′,N′-tetramethyl-1,2-ethanediamine) has been considered. In the styrene complex (1b) both solution (NMR) and solid state (X-ray) data indicate a significant difference in the Pt-C bond lengths (the longer bond being that involving the olefin carbon atom carrying the phenyl ring). Such a difference increases when X is an electron donor group (EDG, 1c) and decreases when X is an electron withdrawing group (EWG, 1d-g). The attack of a nucleophile (MeO⁻) to the substituted carbon (Markovnikov type, M) is by far the most favoured in the case of unsubstituted (1b) or EDG-substituted (1c) styrenes. The presence of an EWG (compounds 1d-g) levels off the probability of M and anti-M type of attack. DFT calculations on 1b,c and 1e were also performed. The NLMO analysis reveals the crucial role of the interaction between the filled π orbital of the olefin and the empty d orbital of platinum; the carbon with greater electron density becoming less susceptible of nucleophilic attack.     

Photochemistry of 3,6-bis(styryl)pyridazines in solution and in neat liquid crystalline phase—optical switching and imaging techniques

3,6-Bis(styryl)pyridazines 1a-f with 2-6 alkoxy groups show on irradiation in solution a stereoisomerization which leads to a photostationary state of (E,E)- and (E,Z)-isomer. Sensitizing and quenching experiments reveal that the (E,E)→(E,Z) route is a pure triplet process, whereas the (E,Z)→(E,E) route can have a minor singlet by-reaction.Hexyloxy or dodecyloxy chains on the terminal benzene rings convey the (E,E)-isomers of compounds 1a,b,d-f thermotropic liquid crystalline properties. In particular S_A, S_C, and S_F/I phases were studied with regard to their photochemical behavior. Depending on the system, photodegradation of the smectic phase to the isotropic melt (S→I) or photoinduction of the smectic phase (I→S) can be achieved by alteration of the (E,E)/(E,Z) ratio. These processes represent the basis for imaging techniques (writing and erasing of information).     

Generation of hexahydroazulenes

(Z)-Cyclodec-1-en-6-yne (3) generates three conjugated hexahydroazulenes 3→1k→1c, 1? under FVP conditions, whereas flash vacuum pyrolysis (FVP) of cyclodecyne (2) leads to 1,2,9-decatriene (9). We attribute the different thermal behavior of 2 (ring opening) and 3 (ring closure) to different transannular interactions. Altogether 22 constitutional isomers of hexahydroazulene should exist; three new isomers (1k, 1?, and 1m) are presented here, ten were described earlier, but the reinvestigation of the dehydration route of bicyclic alcohol 11 showed that one of the ten structures has to be revised.     

A new approach to 2,2-disubstituted 1-(methylsulfanyl)vinyl phosphonates via an intermediate thiocarbonyl ylide

The reaction of methyl (diethylphosphoryl)dithioformate (6) with diaryldiazomethanes 7a-d in THF at −60 °C to room temperature followed by desulfurization is shown to be a convenient method for the preparation of 2,2-disubstituted 1-(methylsulfanyl)vinyl phosphonates 8a-d. The analogous reactions with 2-diazoacenaphthen-1-one (7f) or 2-diazocamphor (7g) in refluxing THF yield selectively the corresponding (Z)- and (E)-vinyl phosphonates 8f and 8g, respectively. These products can be easily oxidized to the vinylsulfoxides 13 and vinylsulfones 14. On the other hand, methyl (diethylphosphoryl)dithioformate (6) and 2-diazo-1,2-diphenylethanone (7e) in boiling THF react to give the 1,3-oxathiole 12. All these reactions occur via an intermediate thiocarbonyl ylide 11 followed by 1,3-dipolar electrocyclization and sulfur extrusion or 1,5-dipolar electrocyclization.     

Naphthyridines. Part 3: First example of the polyfunctionally substituted 1,2,4-triazolo[1,5-g][1,6]naphthyridines ring system

Treatment of 1,2,4-triazoles (1) with diethylmalonate in bromobenzene gave 1,2,4-triazolo-[1,5-a]pyridines 2. Chlorination of 2 using POCl₃/DMF (Vilsmeier reagent) led to the isolation of 7-chloro-6-formyl-1,2,4-triazolo[1,5-a]pyridine derivative 4, which reacted with the stabilized ylid 5 to afford 6-ethoxycarbonylvinyl-1,2,4-triazolo[1,5-a]-pyridines 6. Azidation of 6 yielded the corresponding azido compound 7, (Scheme 2). Reduction of 7 with Na₂S₂O₄ gave the corresponding 7-amino compound 8, which cyclized in boiling DMF to give the novel 1,2,4-triazolo[1,5-g][1,6]naphthyridines 9. On the other hand, reacting 7 with one equivalent of PPh₃ (aza-Wittig reaction) in CH₂Cl₂ gave 7-imino-phosphorane derivative 10, and subsequent cyclization in boiling DMF afforded the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 11 (Scheme 3). However, treatment of 10 with phenyl isothiocyanate in 1,2-dichlorobenzene at reflux temperature gave the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 14 (Scheme 4). Refluxing 6 with excess of a primary amines 15a,b in absolute. EtOH yielded the corresponding 7-alkyl-amino-1,2,4-triazolo[1,5-a]pyridines 16a,b. These obtained amines 16a,b underwent intramolecular heterocyclization in boiling DMF to give the novel 9-alkyl-1,2,4-triazolo[1,5-g][1,6]-naphthyridines 17a,b, in excellent yields (Scheme 5).     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Half-sandwich η-arene–ruthenium(II) complexes bearing 1-alkyl(benzyl)-imidazo[4,5-f][1,10]-phenanthroline (IP) derivatives: the effect of alkyl chain length of ligands to catalytic activity

The reaction of bromoalkanes (R–Br; (3), R=C_nH_2n+1, n=4 (a), 8 (b), 12 (c),18 (d)) and bromobenzyl derivatives (R′–Br; (4), R′=CH₂C₆H₂(CH₃)₃-2,4,6 (a); CH₂C₆H(CH₃)₄-2,3,5,6 (b); CH₂C₆(CH₃)₅ (c)) with 1H-imidazo[4,5-f][1,10]-phenanthroline (IP)(L₂) gave the corresponding 1-R-imidazo[4,5-f][1,10]-phenanthroline (IPR)(L_3a–d) and 1-R′-imidazo[4,5-f][1,10]-phenanthroline(IPR')(L_4a–c) ligands, respectively. Treatment of L_3a–d and L_4a–d with [Ru(p-cymene)Cl₂]₂ led to the formation of [Ru(p-cymene)(IPR)Cl]Cl (RuL_3a–d) and [Ru(p-cymene)(IPR′)Cl]Cl (RuL_4a–c). New ruthenium(II) complexes RuL_3a–d and RuL_4a–c were characterized by elemental analysis, FTIR, UV–visible and NMR spectroscopy. In order to understand effects of these changes on the N-substituent of imidazol on IP and how they translate to catalytic activity, these new RuL₂, RuL_3a–d and RuL_4a–c were applied in the transfer hydrogenation of ketones by 2-propanol in presence of potassium hydroxide. The activities of the catalysts were monitored by NMR and GC analysis.     

Synthesis of new tetracyclic 7-oxo-pyrido[3,2,1-de]acridine derivatives

A series of (±)3-hydroxyl- and 2,3-dihydroxy-2,3-dihydro-7-oxopyrido[3,2,1-de]acridines were synthesized for antitumor evaluation. These agents can be considered as analogues of glyfoline or (±)1,2-dihydroxyacronycine derivatives. The key intermediates, 3,7-dioxopyrido[3,2,1-de]acridines (15a,b or 24a,b), for constructing the target compounds were synthesized either from 3-(N,N-diphenylamino)propionic acid (14a,b) by treating with Eaton’s reagent (P₂O₅/MsOH) (Method 1) or from (9-oxo-9H-acridin-10-yl)propionic acid (23a-c) via ring cyclization under the same reaction conditions (Method 2). Compounds 15a,b and 24a,b were converted into (±)3-hydroxy derivatives (25a-d), which were then further transformed into pyrido[3,2,1-de]acridin-7-one (28a-d) by treating with methanesulfonic anhydride in pyridine via dehydration. 1,2-Dihydroxylation of 28a-d afforded (±)cis-2,3-dihydroxy-7-oxopyrido[3,2,1-de]acridine (29a-d). Derivatives of (±)3-hydroxy (25a,b) and (±)cis-2,3-dihydroxy (29a-d) were further converted into their O-acetyl congeners 26a,b and 30a-d, respectively. We also synthesized 2,3-cyclic carbonate (31, 32, and 33) from 29a-c. The anti-proliferative study revealed that these agents exhibited low cytotoxicity in inhibiting human lymphoblastic leukemia CCRF-CEM cell growth in culture.     

Synthesis and reactivity of new functionalized Pd(II) cyclometallated complexes with boronic esters

Treatment of the functionalized Schiff base ligands with boronic esters 1a, 1b, 1c and 1d with palladium (II) acetate in toluene gave the polynuclear cyclometallated complexes 2a, 2b, 2c and 2d, respectively, as air-stable solids, with the ligand as a terdentate [C,N,O] moiety after deprotonation of the -OH group. Reaction of 1j with palladium (II) acetate in toluene gave the dinuclear cyclometallated complex 5j. Reaction of the cyclometallated complexes with triphenylphosphine gave the mononuclear species 3a, 3b, 3c, 3d and 6j with cleavage of the polynuclear structure. Treatment of 2c with the diphosphine Ph₂PC₅H₄FeC₅H₄PPh₂ (dppf) in 1:2 molar ratio gave the dinuclear cyclometallated complex 4c as an air-stable solid.Deprotection of the boronic ester can be easily achieved; thus, by stirring the cyclometallated complex 3a in a mixture of acetone/water, 3e is obtained in good yield. Reaction of the tetrameric complex 2a with cis-1,2-cyclopentanediol in chloroform gave complex 2c after a transesterification reaction. Under similar conditions complexes 3a and 3d behaved similarly: with cis-1,2-cyclopentanediol, pinacol or diethanolamine complexes 3c, 3b, 3g and 3f, were obtained. The pinacol derivatives 3b and 3g experiment the Petasis reaction with glyoxylic acid and morpholine in dichloromethane to give complexes 3h, and 3i, respectively.     

X-ray diffraction studies of two azametallatranes. Peculiarities of structures of N,N′,N″-tris(trimethylsilyl)azametallatranes using DFT calculations

Single crystal structures of N(CH₂CH₂NSiMe₃)₃Si-Vinyl (1) and N(CH₂CH₂NSiMe₃)₃Si-n-Butyl (2) were determined by X-ray diffraction studies: both compounds show weak transannular N_ax→M interactions (1, d(N_ax→Si)=2.712(1) Å, 2, d(N_ax→Ge)=2.743(3) Å). General trends for molecular structures of the group 14 elements (Si, Ge, Sn) azametallatranes are discussed with also included DFT calculations data.     

Synthesis of naturally occurring diene and trienes by Te/Li exchange on (1Z,3Z)-butyltelluro-4-methoxy-1,3-butadiene

(1Z,3Z)-Butyltelluro-4-methoxy-1,3-butadiene 2 was obtained by the hydrotelluration of (Z)-1-methoxy-but-1-en-3-ynes 1. The butadienyllithium 3 obtained by the Te/Li exchange reaction in the (1Z,3Z)-1-butyltelluro-4-methoxy-1,3-butadiene 2 reacted with aldehydes to form the corresponding alcohols 4a-d with total retention of configuration. The alcohols formed undergo hydrolysis, resulting in the α,β,γ,δ-unsaturated aldehydes of (E,E) configuration, which are precursors of trienes obtained from natural sources. The products of this reaction were employed in the synthesis of methyl-(2E,4E)-decadienoate 7, which is a component of the flavor principles of ripe Bartlett pears. Performing the Wittig reaction of the methyl triphenylphosphorane with the deca-(2E,4E)-dienal 5a, we were able to synthesize the undeca-(1,3E,5E)-triene 6a. This compound is a sex-pheromone component of the marine brown algae Fucus serratus, Dictyopteris plagiograma, and Dictyopteris australis. Performing the Wittig reaction of methyl triphenylphosphorane with the octa-(2E,4E)-dienal 5c, the nona-(1,3E,5E)-triene 6b was synthesized. The compound obtained is a sex-pheromone component of the marine brown alga Sargassum horneri. The octa-(1,3E,5E)-triene 6c was easily obtained from hepta-(2E,4E)-dienal 5d by the Wittig reaction with methyl triphenylphophorane. This compound is a sex-pheromone component of the marine brown alga Fucus serratus.     

Palladium(II) and palladium(0)-cocatalyzed ring opening and oxidation reactions of 2-(arylmethylene)cyclopropylcarbinols

In the presence of Pd(II) acetate and triethylamine as well as triphenylphosphine, 2-(arylmethylene)cyclopropylcarbinols 1 underwent ring opening and oxidation reactions smoothly to deliver (2E,4E)-5-arylpenta-2,4-dienals 2 in toluene at 60 °C in moderate to good yields under ambient atmosphere. Mechanisms involved with an in situ generated Pd(0) species from Pd(II) and Et₃N or PPh₃ catalyzed isomerization of 1 to provide (E,E)-5-arylpenta-2,4-dien-1-ols 3 and following a Pd(II) catalyzed aerobic oxidation of 3 have been proposed on the basis of control and deuterium labeling experiments.     

Efficient and regioselective chromium(0)-catalyzed reaction of 2-substituted furans with diazo compounds: stereoselective synthesis of (2E,4Z)-2-aryl-hexadienedioic acid diesters

Pentacarbonyl(η²-cis-cyclooctene)chromium(0) (1) catalyzes efficiently reactions of diazo compounds with electron-rich furans. The reaction of 2-methoxyfuran (2) with alkyl α-diazoarylacetate (3a-g) furnishes the (2E,4Z)-2-aryl-hexadienedioic acid diesters (4a-g) in excellent yields. These reactions are highly regioselective. The cyclopropanation intermediates formed from 1 and diazo compounds 3a-g always arise from a carbene addition to the less substituted CC bond of 2. The resulting cyclopropanation product undergoes a ring opening reaction to form the corresponding (2E,4Z)-2-aryl-hexadienedioic acid diesters (4a-g). The pentacarbonylchromium(0)-catalyzed reactions of 2-alkylfuran (5a-b) with ethyl α-diazophenylacetate (3a) and 9-diazo-9H-fluorene (3h) produce the 1(E),3(E)-butadienes (6a-d) in very good yields.     

Influence of multidentate N-donor ligands on highly electrophilic zinc initiator for the ring-opening polymerization of epoxides

A set of multidentate ligands have been synthesized and used to stabilize the putative highly electrophilic zinc species initiating ring-opening polymerization (ROP) of cyclohexene oxide (CHO) and propylene oxide (PO). Reaction of the bidentate C₂-chiral bis(oxazoline) ligand (^R2,R3BOX: R₂ = (4S)-tBu, R₃ = H (a); R₂ = (4S)-Ph, R₃ = H (b); R₂ = (4R)-Ph, R₃ = (5S)-Ph (c)) with Zn(R₁)₂ (R₁ = Et (1), Me (2)) led to the heteroleptic three-coordinate complexes (^R2,R3BOX)ZnR₁, 1a-c and 2a, which were isolated in 92-96% yield. Next, two pyridinyl-functionalized N-heterocyclic carbene (NHC) ligands have been designed and synthesized: the 1,3-bis(2-pyridylmethyl)imidazolinium salt (d) and the protected NHC adduct 2-(2,3,4,5,6-pentafluorophenyl)-1,3-bis(2-pyridylmethyl)imidazolidine (e). The reaction of ligands d and e with ZnEt₂ led directly to the formation of (NHC)ZnEt(Cl) 3d complex with ethane elimination and the adduct (NHC-C₆F₅(H))ZnEt₂4e, respectively, in high yield. In situ combinations of selected complexes 1a-c, 3d and 4e with B(C₆F₅)₃ (1 or 2 equivalents) give active systems for ROP, with high productivity (3.3-5.9 10⁶ g_polym. mol_Zn⁻¹ h⁻¹) and high molecular weight (M_n up to 132 10³ g mol⁻¹) for CHO polymerization. Although the in situ B(C₆F₅)₃-activated zinc species were not isolated, the sterically demanding BOX ligands (1c > 1b > 1a) and functionalized NHC ligands seem to enhance the stability of highly electrophilic zinc complexes over ligand redistribution, allowing a better control of the cationic ROP as reflected particularly for 3d and 4e complexes by their respective efficiency (42-88%).     

Alternative synthesis of cystothiazole A

Palladium-catalyzed methoxycarbonylation of (−)-(2R,3S)-1-tert-butyldimethylsiloxy-3-methyl-2-methoxypenta-4-yne 9 derived from (2R,3S)-epoxy butanoate 5 gave the acetylenic ester 10, which was treated with MeOH in the presence of Bu₃P to afford selectively (Z)-β-methoxy acrylate congener 11 in 86% yield. Treatment of (Z)-11 with 99.8% enrichment of CDCl₃ followed by consecutive desilylation and oxidation afforded the left-half aldehyde (+)-2. The overall yield (10 steps from 5; 23%) of (+)-2 via the present route was improved in comparison to that (10 steps from 5; 10%) of the previously reported route. By applying the modified Julia's coupling method, selectivity (E/Z=14:1) of the (E)-form (cystothiazole A 1) against the (Z)-form was improved in comparison to the Wittig method (E/Z=4:1 to 6.9:1).     

Synthesis of Methylenecyclopropane Analogues of Antiviral Nucleoside Phosphonates

Synthesis of methylenecyclopropane analogues of nucleoside phosphonates 6a, 6b, 7a and 7b is described. Cyclopropyl phosphonate 8 was transformed in four steps to methylenecyclopropane phosphonate 16. The latter intermediate was converted in seven steps to the key Z- and E-methylenecyclopropane alcohols 23 and 24 separated by chromatography. Selenoxide eliminations (15→16 and 22→23+24) were instrumental in the synthesis. The Z- and E-isomers 23 and 24 were transformed to bromides 25a and 25b, which were used for alkylation of adenine and 2-amino-6-chloropurine to give intermediates 26a, 26b, 26c and 26d. Acid hydrolysis provided the adenine and guanine analogues 6a, 6b, 7a and 7b. Phosphonates 6b and 7b are potent inhibitors of replication of Epstein-Barr virus (EBV).     

Substituted six-membered ring carbenes: the effects of amino and cyclopropyl groups through DFT calculations

DFT calculations are employed to compare and contrast six-membered ring carbenes including 1,3-dimethyltetrahydropyrimidin-2-ylidene (1a), 1-methyl-3-cyclopropyltetrahydropyridine-2-ylidene (2a), and 1,3-dicyclopropylcyclohexane-2-ylidene (3a) as well as their unsaturated analogues 1b, 2b, 3b, and 2c. The amino groups exert singlet-triplet energy separation (?E_s−t) of 60.9 kcal/mol to 1a while cyclopropyls induce a ?E_s−t of 14.8 kcal/mol to 3a. The simultaneous presence of amino and cyclopropyl in 2a leads to a ?E_s−t of 43.3 kcal/mol. Unsaturation slightly increases the ?E_s−t of 1a and 3a but not that of 2a. Our thermodynamic, kinetic, and reactivity results are compared with those of synthetic five-membered ring N-heterocyclic carbenes.     

Oxazoline Chemistry. Part 11: Syntheses of natural and synthetic isoflavones, stilbenes and related species via C-C bond formation promoted by a Pd-oxazoline complex

The complex trans-[PdCl₂(2-ethyl-2-oxazoline-κ¹N)₂] (1) is shown to be an active and oxidatively robust catalyst for C-C bond forming reactions (Heck, Sonogashira, Ullmann, Miyaura-Suzuki, etc.). These reactions can be carried out in air without rigorous solvent/substrate purification and in the absence of additional free ligand. The general methodology described above has been applied to the high yield and regio-selective formation, via Miyaura-Suzuki coupling, of natural and synthetic isoflavones (i.e., isoflavone, 2′-methylisoflavone [7b], 3′-methylisoflavone [7c] and 3′,4′-benzoisoflavone: [7d]). Compounds 7c and 7d are previously unknown. In addition, the synthesis of (E)-tris-O-methylresveratrol and (E)-3,5-dimethoxystilbene is also described; the former is a recognized anti-cancer agent while the latter is a biologically active extract from the bark of the conifer species Pinus armandii. Both of these latter products are produced as a result of a Heck coupling reaction promoted by 1.     

Convenient syntheses of fluorous phenols of the formula HOC6H5−n((CH2)3(CF2)7CF3)n (n=1, 2) and the corresponding triarylphosphites

The aldehydic benzyl ethers PhCH₂OC₆H₄CHO (2; a/b = para/meta series) are readily available from the corresponding phenols and react with Wittig reagents derived from [Ph₃PCH₂CH₂R_f8]⁺I⁻ (R_f8=(CF₂)₇CF₃) to give PhCH₂OC₆H₄CHCHCH₂R_f8 (86-93%, Z major). Reactions with H₂ over Pd/C give the fluorous phenols HOC₆H₄(CH₂)₃R_f8(4a,b; 87-91%). Condensations with PCl₃ and NEt₃ (3.0:1.0:3.3 mol ratio) give the fluorous phosphites P[OC₆H₄(CH₂)₃R_f8]₃(5a,b; 92-94%), but traces of 4a,b are difficult to remove. The phthalate-based benzyl ethers PhCH₂OC₆H₃(COOR)₂ (7; ,5/3,4 OC₆H₃-3,n-(R)₂ series) are easily accessed and reduced with LiAlH₄ to the diols PhCH₂OC₆H₃(CH₂OH)₂(8c,d; 89-90%). Diol 8c and the Dess-Martin periodinane react to give the dialdehyde PhCH₂OC₆H₃(CHO)₂ (9c; 95%). This is elaborated by a sequence analogous to 2→4→5 to the fluorous phenol HOC₆H₃((CH₂)₃R_f8)₂ (11c; 97%/96%, two steps) and phosphite P[OC₆H₃((CH₂)₃R_f8)₂]₃ (12c, 92%), from which traces of 11c are difficult to remove. Diol 8d can be similarly elaborated to 11d, but the dialdehyde 9d is labile and the combined yield of the Dess-Martin/Wittig steps is 32%. The CF₃C₆F₁₁/toluene partition coefficients of 11c,d, and 12c (two pony tails; 70:30, 72:28, 92:8) are much higher than those of 4a and b (one pony tail; 12:88, 14:86).