A new synthesis of 2-substituted-1,3-dithianes from trichloromethyl compounds

Trichloromethyl compounds are efficiently converted into 1,3-dithianes upon reaction with a disodium 1,3-propanedithiolate-1,3-propanedithiol mixture in DMF solution at 0 °C. This synthesis is limited to those substrates where the substituent attached to the trichloromethyl group is an electron-withdrawing group.     

A novel method for the determination of total 1,3-octanediols in apple juice via 1,3-dioxanes by solid-phase microextraction and high-speed gas chromatography

In this work, a novel, simple and fast method based on solid-phase microextraction (SPME) followed by high-speed gas chromatography (HSGC) was developed for the analysis of total 1,3-octanediols in apple juices by means of derivatization reaction to volatile 1,3-dioxanes. The derivatization reaction, SPME conditions, glycosidically bound fraction and 1,3-nonanediol as a surrogate standard were studied. The formation of 1,3-dioxanes from 1,3-diols was confirmed by GC–MS. The method was validated obtaining a regression coefficient (r²) of 0.9996, precisions between 0.3 and 9.8%, extraction recoveries in the range 94.7–112.2% and LOD of 2.9 μg l⁻¹. Experimental design has been employed in the optimization of extraction factors and robustness assessment. The method was applied to the analysis of 21 Asturian apple varieties finding a double reciprocal relationship between the concentrations of saturated and unsaturated 1,3-octanediol.     

Heteropoly acid-catalyzed highly efficient alkylation of 1,3-dicarbonyl compounds with benzylic and propargylic alcohols

Various 1,3-dicarbonyl compounds reacted readily with benzylic and propargylic alcohols in the presence of 10 mol % of phosphomolybdic acid supported on silica gel (PMA/SiO₂) under mild reaction conditions to produce 2-benzylic- and 2-propargylic-1,3-dicarbonyl compounds in excellent yields and with high selectivity.     

Iodine as a versatile catalyst for the hydroalkylation of vinyl arenes with 1,3-diketones

The vinyl arenes undergo smooth hydroalkylation with 1,3-diketones in the presence of 10 mol % of iodine to afford phenethyl diketones and ketoesters in good yields in short reaction times. The use of inexpensive and readily available molecular iodine makes this method quite simple, more convenient and practical.     

Novel and efficient approach to (Z)-4-trifluoroethylidene-1,3-dioxolane derivatives via (trifluoromethyl)ethynylation of ketones and aldehydes

Perfluoroalkylated 4-trifluoroethylidene-1,3-dioxolanes 2a-p were prepared in quantitative yields from the reaction of new stable (trifluoromethyl)ethynylation reagent 1a with TBAF at −15 °C for 10 min, followed by treatment with phenyl perfluoroalkylated ketones at room temperature. The use of aldehydes under the same reaction condition afforded 1,3-dioxolanes 2q-r in good yields. The reaction of 1a with TBAF, followed by treatment with aldehydes or ketones at −15 °C for 10 min and then with trifluoroacetophenone at room temperature provided 1,3-dioxolane derivatives 2s-t in good yields. Tetrabutylammonium trifluoropropynylide [II] was treated with benzaldehyde derivatives at −15 °C for 10 min, followed by treatment with trifluoroacetophenone, to give the corresponding 1,3-dioxolanes 2u-z and 1,3-dioxines 3u-z with different reaction condition.     

Microwave-assisted rapid electrophilic fluorination of 1,3-dicarbonyl derivatives with Selectfluor

A microwave-assisted fluorination method for 1,3-dicarbonyl compounds using Selectfluor^® has been developed. 2-Monofluorinated products can be obtained in high yield in neutral reaction conditions with addition of 1 eq. of Selectfluor^®. Treatment of 1,3-dicarbonyls with 3 eq. of Selectfluor^® in the presence of tetrabutylammonium hydroxide (TBAH) as the base results in the formation of 2,2-difluorinated derivatives only.     

Tricyclic-isoxazolidine analogues via intramolecular 1,3-dipolar cycloaddition reactions of nitrones

The tricyclic-isoxazolidine analogues tetrahydrothiochromenoisoxazoles, hexahydroisoxazolequinolines and tetrahydroisoxazolepyranopyridines were prepared by an intramolecular 1,3-dipolar cycloaddition reaction of a nitrone with an alkene. For N-alkylated hexahydroisoxazolequinolines, reduction of the reaction time from two days to 40 min was achieved using microwave heating. The cyclization to form tetrahydroisoxazolepyranopyridines only proceeded when the alkene was substituted with an electron withdrawing group.     

Gas-phase formation of SiSe in IR laser-co-decomposition of dimethyl selenide and 1,3-disilacyclobutane

A LIF excitation spectrum of SiSe obtained upon IR laser irradiation of gaseous mixture of 1,3-disilacyclobutane and dimethyl selenide reveals that the previously reported infrared multiple photon co-decomposition of both compounds involves formation of SiSe. The SiSe formation is explained in terms of reaction of Se atoms with RHSi: silylenes (R = CH₃, H) and silene, and elimination of RH from silaneselones (RHSiSe, R = CH₃, H).     

Orthogonal synthesis of pyrroles and 1,2,3-triazoles from vinyl azides and 1,3-dicarbonyl compounds

Tri- and tetrasubstituted N-H pyrroles were prepared by the simple treatment of vinyl azides with 1,3-dicarbonyl compounds in toluene at 100 °C via 2H-azirine intermediates generated in situ. When the reactions of vinyl azides and 1,3-dicarbonyl compounds were performed in DMF in the presence of a catalytic amount of K₂CO₃, 1-vinyl-1,2,3-triazoles were obtained via 1,3-dipolar cycloaddition. These methodologies exploited orthogonal modes of chemical reactivity of vinyl azides, which could be achieved by slight modification of the reaction conditions.     

FeCl3-catalyzed alkylation of indoles with 1,3-dicarbonyl compounds: an expedient synthesis of 3-substituted indoles

Indoles undergo smooth alkylation at the 3-position with 1,3-dicarbonyl compounds in the presence of 20 mol % of FeCl₃ under mild reaction conditions to produce a wide range of 3-substituted indoles in excellent yields and with high E-selectivity.     

Synthesis of non-aggregating chlorins and isobacteriochlorins from meso-tetrakis(pentafluorophenyl)porphyrin: a study using 1,3-dipolar cycloadditions under mild conditions

The 1,3-dipolar cycloaddition of meso-tetrakis(pentafluorophenyl)porphyrin and its nickel complex, with the bulky azomethine ylide dipole was studied under mild conditions, and yielded chlorin and isobacteriochlorin derivatives self-prevented from aggregation. The reactions were performed at room temperature or 0 °C, and we were able to establish a set of reaction conditions to obtain only the chlorin or the isobacteriochlorin. These compounds were evaluated in solution, and no aggregation was observed at less than 25 mM (∼30 mg mL⁻¹) using ¹H NMR experiments.     

ZnO nanoparticles: a green efficient catalyst for the room temperature synthesis of biologically active 2-aryl-1,3-benzothiazole and 1,3-benzoxazole derivatives

A facile synthetic protocol for the synthesis of 2-aryl-1,3-benzothiazoles and 1,3-benzoxazoles has been demonstrated using ZnO nanoparticles as a mild and efficient heterogeneous catalyst. The reactions using ZnO nanoparticles were very fast (<8 min) and provided excellent yields (>90%) of the products. The catalyst was recycled and reused up to eight times without significant loss of catalytic activity. The potential application of 2-(4-hydroxyphenyl)-1,3-benzothiazole as new acid–base indicator has also been demonstrated in this Letter.     

Two distinct manganese(II) complexes with hexadentate 1,3-propanediaminetetraacetate ligand: The ability of metal(II) complexes with 1,3-pdta ligand to form solid solutions

The ability of Mn(II) ion to form two distinctly different complexes with 1,3-propanediaminetetraacetate (1,3-pdta) ligand has been demonstrated by performing X-ray analyses of their crystalline Mg(II) salts. The two types of Mn(II) complexes have been obtained by different synthetic routes and their crystals constitute, respectively, the solid solution of the composition [Mg(H₂O)₆][Mg_0.5Mn_0.5(1,3-pdta)] · 2H₂O (1) and the ordered crystals of the composition [Mg(H₂O)₆][Mn(1,3-pdta)(H₂O)] · 2H₂O (2). In both, six- 1 and seven-coordinated 2 Mn(II) complexes the 1,3-pdta ligand acts as a hexadentate. As 2 makes the second example of the seven-coordinated 1,3-pdta complex with divalent transition metal ion, the other being the [Mg(H₂O)₆][Cd(1,3-pdta)(H₂O)] · 2H₂O (3) complex, the paper reports the results of X-ray investigations of both of these complexes at 130 K.     

Proline-catalyzed aldol reactions of acyl cyanides with acetone: an efficient and convenient synthesis of 1,3-diketones

The aldol-type addition of acetone towards (un)substituted benzoyl, heteroarylcarbonyl or α,β-unsaturated acyl cyanides was efficiently catalyzed by l-proline (30 mol %) to give 2-hydroxy-4-oxo-2-substituted pentanenitriles. Upon the treatment with sodium hydroxide, the adducts transformed to 1,3-diketones in good-to-excellent yield, furnishing an efficient and convenient method for the regioselective synthesis of 1,3-diketones.     

Unprecedented two-step synthesis of symmetrical diarylamines from 2-alkyl-1,3-dinitropropanes

This letter reports a new, two-step synthesis of symmetrical diarylamines from 1,3-dinitropropanes, by their reaction with acrolein under basic conditions (Al₂O₃, neat), followed by aromatisation of the obtained 2,4-dinitrocyclohexanols, through their treatment with four equivalents of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), in acetonitrile as a solvent, and warming overnight at 60 °C.     

Computational study of reaction pathways in the course of interaction of deactivated silylenes with buta-1,3-diene

The PESs of systems including deactivated silylenes (SiHHal, SiHal₂, Hal = F, Cl, and 2-silaimidazol-2-ylidene, SiN₂H₂C₂H₂) and buta-1,3-diene have been studied using G3(MP2)//B3LYP method. Two major reaction channels, (2 + 1) and (4 + 1) cycloaddition reactions, leading to 2-vinylsiliranes and silacyclopent-3-enes, respectively, as well as [1,3]-sigmatropic rearrangements between 2-vinylsiliranes and the corresponding silacyclopent-3-enes, have been considered in detail. Reactivity of silylenes toward buta-1,3-diene decreases in the following series: SiHHal > SiHal₂ > SiN₂H₂C₂H₂, which is reflected in increase of the reaction barriers for both cycloaddition reactions and in decrease of exothermicity of the formation of the corresponding products. The (4 + 1) cycloaddition is preferable for SiHal₂ and SiN₂H₂C₂H₂ and can compete with (2 + 1) cycloaddition for SiHHal. [1,3]-Sigmatropic rearrangement is important for isomerization of 2-vinylsiliranes to the corresponding silacyclopent-3-enes for all systems studied, except the SiCl₂ system.     

The [F]2-Fluoro-1,3-thiazolyl Moiety - an Easily-Accessible Structural Motif for Prospective Molecular Imaging Radiotracers

2-Fluoro-1,3-thiazoles were rapidly and efficiently labeled with no-carrier-added fluorine-18 (t_1/2 = 109.7 min) by treatment of readily prepared 2-halo precursors with cyclotron-produced [¹⁸F]fluoride ion. The [¹⁸F]2-fluoro-1,3-thiazolyl moiety constitutes a new and easily-labeled structural motif for prospective molecular imaging radiotracers.     

New Approach to the Synthesis of 1,3-Chloroisothiocyanatoalkanes. Synthesis of Tetrahydro-1,3-thiazine-2-thiones and 2-Alkylamino-5,6-dihydro-1,3-thiazines

A method was developed to prepare 1,3-chloroisothiocyanatoalkanes by reducing 1,3-isothiocyanato ketones using sodium borohydride at pH ~7 and subsequent treatment of the resultant 1,3-isothiocyanato alcohols with thionyl chloride. The reaction of 1,3-chloroisothiocyanatoalkanes with sodium hydrosulfide or amines gives substituted tetrahydro-1,3-thiazine-2-thiones or 2-amino-5,6-dihydro-1,3-thiazines.     

Brönsted acid ionic liquid-catalyzed direct benzylation, allylation and propargylation of 1,3-dicarbonyl compounds with alcohols as well as one-pot synthesis of 4H-chromenes

Recyclable ionic Brönsted acid was prepared in nearly quantitative yield by reacting 1-butylimidazole with an equimolar amount of 1,3-propanesultone, followed by treatment with an equimolar amount of trifluoromethanesulfonic acid. The ionic Brönsted acid-catalyzed direct benzylation, allylation and propargylation of 1,3-dicarbonyl compounds with various alcohols in ionic liquid [N-ethyl-N-methyl imidazolium trifluoromethanesulfonate (EMIOTf)], at 100 °C for 3 h proceeded smoothly to give the corresponding products in good to excellent yields without the use of any hazardous or volatile solvents and without any by-product such as salts. Furthermore, tandem benzylation-cyclization-dehydration of 1,3-dicarbonyl compounds to give functionalized 4H-chromenes was also achieved in this catalytic reaction.     

Synthesis of new polyazines by 1,4 photochemical or anionic polymerization of 1,2-diaza-1,3-butadienes

Photochemical and anionic polymerizations of 1,2-diaza-1,3-butadienes are described. Photochemical polymerization was smoothly performed by irradiation of some 1-aminocarbonyl-1,2-diaza-1,3-butadienes with high pressure mercury arc (λ = 300 nm) in the presence of allyltributylstannane. Molecular weights (M_w) in the range 14.6-559 × 10² g/mol were obtained. The TGA curve revealed a first weight loss starting at about 200 °C of some 85%, and a second starting at about 300 °C. The DSC showed the glass transition (T_g) at about −34 °C. Anionic polymerization was performed by treatment of some 1-alkoxycarbonyl-1,2-diaza-1,3-butadienes with n-butyllithium. Molecular weights (M_w) in the range 8.44-242 × 10² g/mol were obtained.