Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

Deactivation and regeneration of the B2O3/TiO2-ZrO2 catalyst in the vapor phase Beckmann rearrangement of cyclohexanone oxime

The deactivation and regeneration of B₂O₃/TiO₂-ZrO₂ catalyst for the vapor phase Beckmann rearrangement of cyclohexanone oxime to -caprolactam were studied. The fresh, deactivated and regenerated catalysts were characterized by using adsorption of nitrogen, X-ray diffraction (XRD), thermogravimetry (TG) and NH₃-temperature-programmed desorption (NH₃-TPD) techniques. The crystal structure and pore size distribution of the catalyst were retained after reaction, but the number of acid sites decreased significantly. There was a relationship between the amount of coke deposited on the catalyst and the decline in catalytic activity. These results suggest that the coke deposition on the surface of catalyst is mainly responsible for the catalyst deactivation. The catalytic activity can be recovered completely after calcining the deactivated catalyst in air flow at 600 °C for 8 h.     

Effects of the preparation methods on the properties of Ni-La2O3-SiO2 catalysts for m -dinitrobenzene hydrogenation

Ni-La₂O₃-SiO₂ catalysts were prepared by wetness impregnation and sol-gel method followed by conventional drying and supercritical drying, respectively. Their physico-chemical properties and activity for the hydrogenation of m-dinitrobenzene to m-phenylenediamine were investigated by BET, XRD, TPR, H₂-TPD and activity tests. The results showed that the structural and catalytic properties of the Ni-La₂O₃-SiO₂ catalysts obviously depended on the preparation method and the drying mode. The catalyst prepared by the sol-gel method in combination with conventional drying exhibited the highest catalytic activity among the catalysts tested, attributable to its well-dispersed nickel particles and larger active nickel surface area.     

可回收Fe3O4@SiO2-Ag磁性纳米微球对染料污染物的快速脱色处理

介绍了一种采用无毒廉价的前驱物制备Fe₃O₄@SiO₂-Ag磁性纳米微球的快捷方法,制备的Fe₃O₄@SiO₂-Ag纳米微球在NaBH₄存在下可以催化还原染料污染物.实验结果表明,Fe₃O₄@SiO₂-Ag磁性纳米粒子保持了Ag纳米粒子和Fe₃O₄纳米粒子的双重优点,不仅对染料罗丹明B和曙红Y具有良好的催化还原效率,而且可以在外加磁场作用下从溶液中快速有效的分离.催化还原反应速率与反应温度及Fe₃O₄@SiO₂-Ag催化剂用量有关,反应体系中表面活性剂和无机盐(Na₂SO₄)的存在也会影响催化剂的催化活性.该Fe₃O₄@SiO₂-Ag磁性纳米粒子在工业染料污染物处理方面具有应用前景.     

合成方法对Rh/CeO2-ZrO2-La2O3催化剂的结构、表面性能及DeNOx活性的影响

用沉积沉淀法合成两种不同系列的CeO2-ZrO2-La2O3混合氧化物(ZrO2和La2O3沉积CeO2粒子(标记为A-x)以及CeO2和La2O3沉积ZrO2粒子(标记为B-x)),并用作Rh催化剂的载体。XRD、拉曼、TPR、XPS和O2脉冲等表征结果显示出不同的沉积顺序将导致不同的结构和氧化还原性能,且B-x具有更高的氧迁移性、储氧能力和表面Ce浓度。当其负载Rh后,Rh/B-x催化剂具有更高的NO和CO转化率及N2选择性,且Ce的最佳含量为50at%。这可能归因于Rh负载于富铈表面形成更多有利于NO分解的表面Ce3+活性位。     

Monolith Manganese-Based Catalyst Supported on ZrO2-TiO2 for NH3-SCR Reaction at Low Temperature

Monolith catalysts were prepared using TiO₂ and ZrO₂-TiO₂ as supports with MnO₂ as active component and Fe₂O₃ as promoter. The catalytic activities at low temperature and stability at high temperature for selective catalytic reduction of NO_x with NH₃ (NH₃-SCR) in the presence of excessive O₂ were studied after the catalysts calcined at different temperatures. The catalysts were characterized by X-ray diffraction (XRD), specific surface area measurements (BET), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results indicated that the catalyst supported on ZrO₂-TiO₂ had excellent stability at high temperature, and possessed high specific surface area and oxygen storage capacity, and had strong redox property. The results of the catalytic activities indicated that the monolith manganese-based catalyst using ZrO₂-TiO₂ as support had evidently improved the activity of NH₃-SCR reduction reaction at low temperature, and it showed great potential for practical application.     

Ag3PO4/Ag2S/g-C3N4复合光催化剂的制备与性能

通过沉积法和离子交换法成功地制备了Ag_3PO_4/Ag_2S/g-C_3N_4复合型光催化剂。利用X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、N_2吸附-脱附等温线、紫外-可见漫反射光谱、荧光光谱等手段对样品进行了表征。通过降解罗丹明B考察其可见光催化活性及稳定性,研究了硫化钠与磷酸银物质的量的比值(n_(Na_2S)/n_(Ag_3PO_4))、g-C_3N_4添加量对所制备复合光催化材料性能的影响,同时对光催化机理进行了探讨。结果表明,随着n_(Na2S)/n_(Ag3PO4)的增加,所得复合催化材料活性先增加后降低;当n_(Na2S)/n_(Ag_3PO_4)为1.5%、g-C_3N_4与Ag_3PO_4的质量比为3∶7时制备的催化剂ASC1.5的光催化活性最好,在可见光照射下,40 min内可将罗丹明B完全降解,且5次循环使用后仍保持较高的催化活性。和Ag_3PO_4相比,Ag_3PO_4/Ag_2S/g-C_3N_4复合型光催化材料的活性与稳定性都得到明显提高,这主要归因于复合催化剂比表面积和孔结构的增加,载流子分离效率的提高。光催化机理研究表明,空穴(h~+)、超氧阴离子自由基(·O~(2-))和羟基自由基(·OH)都是光催化过程中的主要活性物种。三者作用大小依次为:h~+·O~(2-)·OH。     

国产航空煤油裂解催化剂Pt/ZrxTixAl1-2xO2的性能

采用共沉淀法制备了一系列Zr_xTi_xAl_1-2xO₂复合氧化物载体材料,考察了其作为裂解催化剂载体对航空煤油裂解反应的影响.?采用全自动吸附仪、X射线衍射、扫描电镜/能谱仪联用、NH₃-程序升温脱附等手段对催化剂进行了表征.?结果表明,当ZrO₂：TiO₂：Al₂O₃质量比为1：1：3时催化剂具有最大的比表面积和孔容;具有最强的表面酸性和最集中的强酸中心密度,且具有良好的再生功能.?实验结果表明,载体ZrO₂：TiO₂：Al₂O₃质量比为1：1：3时催化剂上650?℃裂解产气量较热裂解提高了2.1倍,700?℃时提高1.4倍.?另外,该系列载体材料经1000?℃焙烧5?h后,所制得的催化剂几乎失去了催化活性.     

Effect of La2O3 on Catalytic Performance of Au/TiO2 for CO Oxidation

Pure TiO₂ and La-doped TiO₂ were prepared by the sol-gel method. Au was supported on TiO₂ by the deposition-precipitation (DP) method, and its catalytic activity for CO oxidation was tested. The results showed that doping La in Au/TiO₂ could improve its catalytic activity obviously for CO oxidation. The analyses of X-ray diffraction (XRD), temperature-programmed desorption (TPD), and Brunauer-Emmett-Teller (BET) surface area further showed that the presence of La in TiO₂ not only increased its surface area and restrained the growth of TiO₂ crystallites, but could also enhance the microstrain of TiO₂. In terms of O₂-TPD, a new adsorbed species O⁻ appeared on the surface of La-doped TiO₂. The results of in-situ Fourier transform-infrared (FT-IR) spectroscopy illustrated that the high activity of Au/La₂O₃-TiO₂ was attributed to the presence of La promoting the reactivity of CO adsorbed on the Au site and the formation of the second active site on the surface of TiO₂     

复合催化剂上CO2加氢合成C2烃类

介绍了由CO₂+H₂合成C2⁺烃的几种复合催化剂体系的研究进展，比较和评价了复合催化剂体系的活性和选择性及对C2⁺烃类生成的影响。着重于复合催化剂体系对C4⁺烃的生成及产物分布的影响并简述反应机理。     

Ag/Ag2MoO4/Bi2MoO6复合光催化剂的制备及其光催化性能

采用水热、化学沉积和原位光还原的方法成功制备了新型Ag/Ag₂MoO₄/Bi₂MoO₆三元复合光催化剂。通过X射线粉末衍射（XRD）、扫描电子显微镜（SEM）、X射线光电子能谱（XPS）和紫外可见漫反射光谱（UV-Vis DRS）等技术对材料的组成、形貌、光吸收特性和光电化学性能等进行系统分析。以四环素为目标污染物,研究Ag/Ag₂MoO₄/Bi₂MoO₆在可见光下的光催化性能。研究结果表明,相比于纯Ag₂MoO₄和Bi₂MoO₆,Ag的表面等离子体共振（SPR）效应显著拓宽了催化体系对可见光的吸收能力及响应范围。当Ag₂MoO₄理论负载量（质量分数）为24.6%时,Ag/Ag₂MoO₄/Bi₂MoO₆复合材料在20 min内可将四环素完全降解,且5次循环使用后仍保持较高的催化活性,表现出良好的循环稳定性。     

Catalytic oxidation of no to NO2 over Cr/TiO2 and Cu/TiO2 under oxidizing atmosphere

The catalytic activity of Cr/TiO₂ and Cu/TiO₂ for the oxidation of NO under an oxidizing atmosphere has been examined. Both catalysts had excellent ability for the oxidation of NO to NO₂ in the temperature range of 350–400°C.     

Ag/Ag2MoO4/Bi2MoO6复合光催化剂的制备及其光催化性能

采用水热、化学沉积和原位光还原的方法成功制备了新型Ag/Ag₂MoO₄/Bi₂MoO₆三元复合光催化剂。通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)和紫外可见漫反射光谱(UV-Vis DRS)等技术对材料的组成、形貌、光吸收特性和光电化学性能等进行系统分析。以四环素为目标污染物,研究Ag/Ag₂MoO₄/Bi₂MoO₆在可见光下的光催化性能。研究结果表明,相比于纯Ag₂MoO₄和Bi₂MoO₆,Ag的表面等离子体共振(SPR)效应显著拓宽了催化体系对可见光的吸收能力及响应范围。当Ag₂MoO₄理论负载量(质量分数)为24.6%时,Ag/Ag₂MoO₄/Bi₂MoO₆复合材料在20 min内可将四环素完全降解,且5次循环使用后仍保持较高的催化活性,表现出良好的循环稳定性。     

g-C3N4/双钙钛矿复合材料的制备及氧催化性能

通过溶胶-凝胶法制备出不同Ni掺杂比例的双钙钛矿Sr_2Ni_xCo_(2-x)O_6(x=0.2,0.4,0.6,0.8),通过热分解法制备出具有层状结构的纳米颗粒g-C_3N_4,并制备其复合物催化剂。将双钙钛矿和g-C_3N_4分别制备成双功能电极片,用于测试其对氧还原(ORR)和氧析出(OER)的催化活性,然后选取具有最佳氧催化活性的Ni掺杂比例x=0.4的双钙钛矿与一定重量比例的g-C_3N_4进行复合,测试复合催化剂的氧催化活性。结果表明,复合后的催化剂催化效果明显优于单一催化剂,当g-C_3N_4添加量占双钙钛矿的30%(w/w)时复合催化剂催化氧还原反应的最大电流密度为395.7 mA·cm~(-2)(-0.6 V vs Hg/HgO),氧析出反应的最大电流密度为372.0mA·cm~(-2)(1 V vs Hg/HgO),这表明g-C_3N_4与Sr_2Ni_(0.4)Co_(1.6)O_6复合后协同催化能够提高双钙钛矿的氧催化活性。     

超临界流体干燥法制备纳米TiO2-SnO2-SiO2复合光催化剂及其光催化性能研究

半导体多相光催化法作为一种污染治理新技术越来越受到人们的重视,在所使用的半导体光催化剂中,TiO2以无毒,催化活性高,价廉,无污染等特点,成为最具有前途的绿色环保型催化剂之一[1],但其自身具有局限性,如禁带宽度大,需在近紫外光下才能激发产生电子空穴对,对太阳光的利用率仅     

The Al2O3-Fe2O3 Mixed Oxidic System, II. Catalytic Decomposition of N2O

N₂O decomposition was examined over a series of Al₂O₃-Fe₂O₃ mixed oxidic solids with composition ranging from 0 to 100% of Fe₂O₃. The catalytic activity of the solids runs parallel to the number of atoms of iron in the Al_2−x Fe_xO₃ solid solution phase. Two compensation effects are present. The first corresponds to catalysts rich in alumina, and the second one to catalysts rich in hematite. This revised version was published online in June 2006 with corrections to the Cover Date.     

铜物种对Cu/Fe2O3水煤气变换反应催化剂性能的影响

采用共沉淀法制备了系列铜负载量不同的Cu/Fe₂O₃水煤气变换(WGS)催化剂,并考察了铜负载量对催化剂结构和水煤气变换反应性能的影响. 结果表明,Cu/Fe₂O₃催化剂呈现出良好的水煤气反应性能,当CuO质量分数为20%时,催化剂的WGS性能最优,250 ℃时CO转化率高达97.2%,同时热稳定性也最好. 运用X射线粉末衍射(XRD)、N₂物理吸脱附和H₂程序升温还原(H₂-TPR)等手段对Cu/Fe₂O₃催化剂的物相、织构特征及还原性能进行了表征,结果表明,CuFe₂O₄物种的存在极大地改善了催化剂的还原性能和WGS反应活性. 这是由于CuFe₂O₄特殊的尖晶石结构有利于Cu微晶的稳定;同时,CuFe₂O₄在低温下即被还原为单质铜,有利于促进催化剂体系中电子的转移. 此外,通过(NH₄)₂CO₃溶液处理,研究了独立相CuO对Cu/Fe₂O₃催化剂WGS反应性能的影响,结果发现,独立相CuO的存在,有利于H原子在各组分传递,从而促进催化剂的CuFe₂O₄的还原,改善Cu/Fe₂O₃催化剂的WGS反应性能.     

Comparative study of LaNiO3 and La2NiO4 catalysts for partial oxidation of methane

The catalytic activity and stability of LaNiO₃ and La₂NiO₄, prepared using a citric acid complex method, have been investigated for partial oxidation of methane (POM) to synthesis gas. The catalysts were characterized by thermo-gravimetric analysis (TG), temperature-programmed reduction (TPR) and temperature-programmed desorption of ammonia (NH₃-TPD). The results show that the catalytic activity and stability of La₂NiO₄ are higher than those of LaNiO₃, due to the stronger interactions between Ni and La₂O₃ in La₂NiO₄ and to its lower acidity as demonstrated by TPR and NH₃-TPD. TG result indicates that carbon deposition occurs on both catalysts, and the carbon species deposited on La₂NiO₄ are mainly metal carbides, while on LaNiO₃ are mainly graphite.     

Influence of Pd precursors on the catalytic performance of Pd–H4SiW12O40/SiO2 in the direct oxidation of ethylene to acetic acid

The effects of palladium precursors (PdCl₂, (NH₄)₂PdCl₄, Pd(NH₃)₂Cl₂, Pd(NO₃)₂ and Pd(CH₃COO)₂) on the catalytic properties in the selective oxidation of ethylene to acetic acid have been investigated for 1.0 wt% Pd–30 wt% H₄SiW₁₂O₄₀/SiO₂. The structures of the catalysts were characterized using X-ray diffraction, N₂ adsorption, H₂-pulse chemical adsorption, infrared spectrometry of the adsorbed pyridine, H₂ temperature-programmed reduction and X-ray photoelectron spectroscopy. The present study demonstrates that the different palladium precursors can lead to the significant changes in the dispersion of palladium. It is found that Pd dispersion decreases as follows: PdCl₂ > (NH₄)₂PdCl₄ > Pd(NO₃)₂ > Pd(NH₃)₂Cl₂ > Pd(C₂H₃O₂)₂, which is nearly identical to the catalytic activity. This indicates that the dispersion of palladium plays an important role in the catalytic activity. Furthermore, density of Lewis (L) and Brönsted (B) acid sites are also strongly dependent on the palladium precursors. It is also demonstrated that an effective catalyst should possess a well combination of Brönsted acid sites with dispersion of palladium.     

Bi2Ti2O7/TiO2复合纤维：原位水热合成及光催化性能

采用静电纺丝技术制备的TiO2纤维作为模板和反应物,通过原位水热合成了具有异质结构的Bi2Ti2O7/TiO2复合纤维。利用X射线衍射(XRD)、扫描电镜(SEM)、能量散射光谱(EDS)、高分辨透射电镜(HRTEM)和紫外可见吸收光谱(UV-Vis)等分析测试手段对样品的结构和形貌进行表征。以罗丹明B为模拟有机污染物进行光催化降解实验。结果表明:花状Bi2Ti2O7纳米结构均匀地生长在TiO2纤维上,制备了Bi2Ti2O7与TiO2相复合的光催化材料,其光谱响应范围拓宽至可见光区,与纯TiO2纤维相比可见光催化活性显著提高,且易于分离、回收和循环使用。初步探讨了Bi2Ti2O7/TiO2异质结的生长机制和光催化活性提高机理。