Acidic ionic liquid [NMP]H2PO4 as dual solvent-catalyst for synthesis of β-alkoxyketones by the oxa-Michael addition reactions

Acidic ionic liquid N-methyl-2-pyrrolidonium dihydrogen phosphate [NMP]H₂PO₄ was prepared and used as efficient catalyst and reaction medium to synthesize β-alkoxyketones by the oxa-Michael addition reactions for the first time. The effect of anions and cations, amount of ionic liquid on the reaction was investigated. Various alcohols and phenols proceeded smoothly and led to corresponding β-alkoxyketones with high yields under mild reaction conditions, O-selectivity addition of aminoethanols was also achieved in this paper. Compared with traditional imidazolium ionic liquids, [NMP]H₂PO₄ gave the better results. The ionic liquid was stable and could be reused at least five times with a slight loss of activity.     

Development of sequential type iron salt-catalyzed Nazarov/Michael reaction in an ionic liquid solvent system

Sequential type one pot Nazarov/Michael reaction of pyrrole derivatives has been demonstrated using 5 mol% Fe(ClO4)3·Al2O as catalyst in an ionic liquid as solvent. We succeeded in obtaining 4,5-dihydrocyclopenta[b]pyrrol-6(1H)-one derivative in good yield for five repetitions of the reactions without any addition of the catalyst using an ionic liquid, [bmim][NTf2], as solvent system.     

Ionic liquid promoted synthesis of heterocycle-fused pyrimidine-2,4(1H,3H)-diones utilising CO2

An efficient ionic liquid system was developed for the preparation of various heterocycle-fused pyrimidine-2, 4(1H,3H)-diones in moderate to excellent yields (52–95%). It was found that [HDBN⁺][TFE^?], a simple and easily prepared ionic liquid, could act as both the solvent and reaction promoter, and that the reactions could be efficiently carried out at atmospheric pressures of CO₂.     

An efficient protocol for synthesis of novel polyheterocyclic chromeno pyrimido[1,2-b]indazolone derivatives using [Et3NH][HSO4] as a reusable catalyst under solvent-free conditions

A convenient and highly efficient method for the synthesis of novel polyheterocyclic chromeno pyrimido[1,2-b]indazolone derivatives via a three-component condensation of 1H-indazol-3-amine, aldehydes and 4-hydroxycoumarin catalyzed by Bronsted acid ionic liquid [Et₃NH][HSO₄] under solvent-free reaction conditions is presented. This ionic liquid is air and water stable and easy to prepare from amine and acid. The main advantages of this protocol includes short reaction time, excellent yield, easy work-up, operational simplicity, a wide range of functional group tolerance and column chromatography-free method. The catalyst can be recovered and reused for at least four runs without any significant impact on the product yields.     

Bi(TFA)3-[nbp]FeCl4: a new, efficient and reusable promoter system for the synthesis of 4(3H)-quinazolinone derivatives

4(3H)-Quinazolinones have been synthesized in high to excellent yields through the one-pot condensation of anthranilic acid, trimethyl orthoformate and primary amines in the presence of 5 mol % of Bi(TFA)₃ immobilized on [nbp]FeCl₄ as a room temperature ionic liquid.     

Catalytic Conversion of Glucose into Levulinic Acid Using 2-Phenyl-2-Imidazoline Based Ionic Liquid Catalyst

Levulinic acid (LA) is an industrially important product that can be catalytically valorized into important value-added chemicals. In this study, hydrothermal conversion of glucose into levulinic acid was attempted using Brønsted acidic ionic liquid catalyst synthesized using 2-phenyl-2-imidazoline, and 2-phenyl-2-imidazoline-based ionic liquid catalyst used in this study was synthesized in the laboratory using different anions (NO₃, H₂PO₄, and Cl) and characterized using ¹H NMR, TGA, and FT-IR spectroscopic techniques. The activity trend of the Brønsted acidic ionic liquid catalysts synthesized in the laboratory was found in the following order: [C₄SO₃HPhim][Cl] > [C₄SO₃HPhim][NO₃] > [C₄SO₃HPhim][H₂PO₄]. A maximum 63% yield of the levulinic acid was obtained with 98% glucose conversion at 180 °C and 3 h reaction time using [C₄SO₃HPhim][Cl] ionic liquid catalyst. The effect of different reaction conditions such as reaction time, temperature, ionic liquid catalyst structures, catalyst amount, and solvents on the LA yield were investigated. Reusability of [C₄SO₃HPhim][Cl] catalyst up to four cycles was observed. This study demonstrates the potential of the 2-phenyl-2-imidazoline-based ionic liquid for the conversion of glucose into the important platform chemical levulinic acid.     

A novel ionic liquids-based scrubbing process for efficient CO2 capture

A novel alkanolamine-based ionic liquid, N-methyl-diethanolammonium tetrafluoroborate ([MDEA][BF₄]), was synthesized in our laboratory. The ionic liquid-based composite solution consisting of N-methyl-diethanolamine (MDEA), [MDEA][BF₄], piperazine (PZ) and H₂O was investigated for CO₂ capture. The optimal performance for CO₂ capture was found at 45 °C, 1.50 MPa, probably due to a synergistic action of the reaction and the transport. No apparent corrosion was found on stainless and carbon steel with the above composite solution. This finding is very significant to the promotion of its engineering application.     

Asymmetric hydrogenation of aromatic ketones catalyzed by achiral monophosphine TPPTS-stabilized Ru in ionic liquids

Achiral monophosphine TPPTS [TPPTS: P(m-C₆H₄SO₃Na)₃]-stabilized Ru was synthesized by reduction of RuCl₃·3H₂O with hydrogen in ethanol using TPPTS as the stabilizer. The catalytic asymmetric hydrogenation of aromatic ketones using TPPTS-stabilized Ru modified by a chiral diamine (1R,2R)-DPENDS [disodium salt of sulfonated (1R,2R)-1,2-diphenyl-1,2-ethylene-diamine] was investigated in hydrophilic ionic liquid [RMIM]Ts (1-alkyl-3-methylimidazolium p-methylphenylsulfonates, R = ethyl, butyl, octyl, dodecyl, hexadecyl). Hundred percent conversion and 85.1% ee were obtained for acetophenone under optimized conditions. The resulting products can be easily separated from the catalyst immobilized in ionic liquid by simple extraction with n-hexane, and the catalyst can be reused several times without a significant loss of ee value or conversion. In particular, the addition of water can improve the catalyst performance.     

Ambient synthesis of spiro[4H-pyran-oxindole] derivatives under [BMIm]BF4 catalysis

A simple and efficient one-pot approach for assembling some fused spiro[4H-pyran-oxindole] heterocycles by means of three-component reactions between isatins, malononitrile or ethyl cyano-acetate, and 1,3-dicarbonyl compounds is reported. The combinatorial syntheses were achieved for the first time without applying extra activation energy at ambient temperature while making use of [BMIm]BF₄ as an ionic liquid catalyst. Good functional group tolerance and broad scope of usable substrates are other prominent features of the present methodology.     

[bmim]BF4/[Cu(Im12)2]CuCl2 as a novel catalytic reaction medium for click cyclization

Herein, a new application of an ionic liquid containing copper (I), ([Cu(Im¹²)₂]CuCl₂), is introduced. This ionic liquid was used as an efficient catalyst for the click cyclization between organic azides and terminal alkynes in various solvents. Then, the mixture of [bmim]BF₄/[Cu(Im¹²)₂]CuCl₂ was used as a green catalytic medium for the multicomponent click synthesis of 1,4-disubstituted-1H-1,2,3-triazoles from α-halo ketones. The reactions were performed efficiently in this mixture and excellent yields were obtained in all cases. This catalytic reaction medium was recycled five times without significant loss of activity.     

ZnO/MgO containing ZnO nanoparticles as a highly effective heterogeneous base catalyst for the synthesis of 4H-pyrans and coumarins in [bmim]BF4

4H-Pyrans and coumarins were synthesized through one-pot reactions using ZnO/MgO solid sample containing ZnO nanoparticles as an efficient reusable catalyst in ionic liquid, [bmim]BF₄. The catalyst is inexpensive and readily available, stable and storable, easily recycled and reused for several cycles with consistent activity. The procedure offers advantages in terms of high yields, short reaction times, and mild solvent-free reaction conditions.     

Asymmetric hydrogenation of α,β-unsaturated ketones catalyzed by Ru–TPPTS–(S,S)-DPENDS complex in ionic liquids

The asymmetric hydrogenation of α,β-unsaturated ketones catalyzed by the achiral ruthenium monophosphine complex RuCl₂(TPPTS)₂ [TPPTS: P(m-C₆H₄SO₃Na)₃] modified by (S,S)-DPENDS [disodium salt of sulfonated (S,S)-1,2-diphenyl-1,2-ethylene-diamine] was investigated in ionic liquid [RMIM]Ts (1-alkyl-3-methylimidazolium p-methylphenylsulfonates, R = ethyl, butyl, octyl, dodecyl). Chemoselectivity of 100% and 75.9% ee were obtained for benzalacetone under the optimized conditions. The resulting products can be easily separated from the catalyst immobilized in ionic liquid [EMIM]Ts by extraction with n-hexane, while the catalyst can be reused seven times without the loss of catalytic activity and enantioselectivity. Especially, the addition of water can improve the performance of the catalyst.     

Olefin epoxidations in the ionic liquid [C4mim][PF6] catalysed by oxodiperoxomolybdenum species in situ generated from molybdenum trioxide and urea–hydrogen peroxide: The synthesis and molecular structure of [Mo(O)(O2)2(4-MepyO)2]·H2O

Commercially available molybdenum(VI) compounds, including molybdenum trioxide, were successfully employed as catalyst precursors in the epoxidation of olefins with urea–hydrogen peroxide adduct (UHP) in the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate, [C₄mim][PF₆]. After oxidation, the corresponding epoxides were isolated by extraction with diethyl ether. Additionally the ionic liquid–catalyst mixture was recycled and reused in further catalytic cycles. The catalytic species is assumed to be an oxodiperoxomolybdenum species which forms in situ. A representative complex of this type was thus isolated and characterised. Reaction of excess 4-methylpyridine-1-oxide (4-MepyO) with MoO₃ dissolved in aqueous hydrogen peroxide afforded [Mo(O)(O₂)₂(4-MepyO)₂]·H₂O (1) as yellow crystals. Compound 1, an active epoxidation catalyst, was subsequently characterised and its structure determined by X-ray crystallography.     

3-exo-tet Cyclization of 2,2-disubstituted 1,3-dihalopropanes with indium in aqueous and ionic liquid solvent system

The 3-exo-tet cyclization of 2,2-disubstituted 1,3-dihalopropanes with In powder in THF solution of 20% H₂O, dioxane solution of 20% H₂O, and ionic liquids, such as [bmim]Br, [bmim]Cl, and [bmin]BF₄, respectively, was efficiently carried out to form the corresponding 1,1-disubstituted cyclopropanes in good yields. The cyclopropanation of 2,2-disubstituted 1,3-dihalopropanes with In powder in ionic liquids, such as [bmim]Br, [bmim]Cl, and [bmin]BF₄, was markedly accelerated compared with that in a THF solution of 20% H₂O and a dioxane solution of 20% H₂O. The mechanism was proposed to involve the radical 3-exo-tet cyclization of the formed 3-halopropyl radical.     

Efficient one-pot three-component synthesis of 3,4-dihydro-12-phenyl-2H-benzo[b] xanthene-1,6,11(12H)-trione derivatives in ionic liquid

A series of 3,4-dihydro-12-phenyl-2H-benzo[b]xanthene-1,6,11(12H)-trione derivatives have been synthesized in high yields in the presence of ionic liquid [bmim⁺]Br^?. The reaction work-up is simple and the ionic liquid can be easily separated from the product and reused.     

Ionic liquid-catalyzed and microwave-assisted syntheses of pyrrolizine- and indolizinedione derivatives

3H-Pyrrolo[2,1-a]isoindole-2,5-diones and isoindolo[2,1-a]quinoline-5,11-diones were synthesized by intramolecular cyclization of N-[2-oxo-3-(triphenyl-??⁵-phosphanylidene)propyl]- and N-[2-(triphenyl-??⁵-phosphanylidene)acetyl]phthalimides, respectively, in the presence of ionic liquid ([bmim][BF₄], 10 mol %) as catalyst or under microwave irradiation.     

Environmentally benign and one-pot synthesis of 14-aryl-14H-dibenzo[a,j]xanthenes catalyzed by acyclic Brønsted acidic ionic liquid [H-NMP][HSO4] under green conditions

A convenient and efficient direct protocol for the preparation of 14-aryl-14H-dibenzo[a,j]-xanthenes was described. The condensation of 2-naphthol with various aromatic aldehydes in the presence of a catalytic amount of [H-NMP][HSO₄] as a Brønsted acidic ionic liquid under solvent-free conditions at 110 °C was described. This method has the following advantages: the reaction workup is very easy, and the catalyst is smoothly recycled to catalyze the preparation of 14-aryl-14H-dibenzo[a,j]xanthenes with high yields through a green and one-pot procedure. The corresponding products have been obtained in excellent yields, with high purity, and in short reaction times.     

磷钼杂多酸离子液体催化氧化脱硫

 合成了新型的磷钼杂多酸离子液体 [hmim]3PMo12O40, 并将其用于室温离子液体 1-甲基咪唑四氟硼酸盐 ([hmim]BF4) 为溶剂的模拟油品氧化脱硫反应. 结果表明, 在温和的反应条件下, 过氧化氢与硫摩尔比为 4:1 时, 二苯并噻吩脱硫率为 90%, 二苯硫醚、苯甲硫醚和二乙硫醚的脱除率可达 100%. 离子液体催化体系循环使用 4 次后, 脱硫率没有明显下降.     

A novel and green synthesis of kojic acid derivatives in ionic liquid [bmim]BF4

A series of 3-(3-hydroxy-6-methyl-4-oxo-4H-pyran-2-yl)-3-phenylpropanamide derivatives were synthesized efficiently by one-pot condensation of aromatic aldehydes, meldrum’s acid, allomaltol, and ammonium acetate in ionic liquid [bmim]BF₄. The novel synthesis method offers the advantage of operational simplicity, mild reaction conditions, short reaction time, higher yields, and environmental friendliness.     

离子液体中13-芳基-5,7,12,14-四氢二苯并[b, i]氧杂蒽5,7,12,14(13H)-四酮衍生物的绿色高效合成

在离子液体[bmim+][BF4-]中高产率的合成了一系列13-芳基-5,7,12,14-四氢二苯并[b, i]氧杂蒽-5,7,12,14(13H)-四酮类化合物。该反应操作步骤简单,离子液体易于与产物分离,并且离子液体可以循环使用。