Hypervalent and binuclear silicon and germanium derivatives from bis-(3,5-di-tert-butyl-2-phenol)-oxamide

The reactions of bis-(3,5-di-tert-butyl-2-phenol)oxamide (1) with Cl₂SiR₂ (Me or Ph) or Cl₂GeR₂ (Me, nBu or Ph) in THF provided binuclear pentacoordinated silicon and germanium compounds: bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-dimethylsilane (2), bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-diphenylsilane (3), bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-dimethylgermane (4), bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-di-n-butylgermane (5) and bis-(3,5-di-tert-butyl-2-oxo-phenyl)-oxamido-bis-diphenylgermane (6). The mono-nuclear tetracoordinated silicon compounds N-acetyl-bis-(3,5-di-tert-butyl-2-oxo-phenyl)-amide-bis-(dimethylsilane) (8) and N-acetyl-bis-(3,5-di-tert-butyl-2-oxo-phenyl)-amide-bis-(diphenylsilane) (9) were synthesized from N-(3,5-di-tert-butyl-2-phenol)acetamide (7) and Cl₂SiR₂ (R = Me and Ph). Comparison of the ²⁹Si NMR chemical shifts of the penta- (2 and 3) and tetracoordinated (8 and 9) silicon compounds provided information about the intramolecular coordination of the carbonyl group to the silicon atom. Compounds 3 and 6 were characterized by single-crystal X-ray analyses. They have planar hexacyclic structures where the central atoms present distorted tbp geometries with one nitrogen and two carbon atoms in equatorial positions and two oxygen atoms in apical positions.     

Synthesis and photochromic properties of quinoxalino[e]-annelated dimethyldihydropyrene with planar chirality

9,10-Diacetyl-2,7-di-tert-butyl-trans-10b,10c-dimethyl-10b,10c-dihydropyrene annelated with a quinoxaline unit (q-DM-DHP, 3) was prepared from 5,13-di-tert-butyl-8,16-dimethyl[2.2]metacyclophane-1,2,9,10-tetraoxide (2) and o-phenylenediamine in two steps. The photochromic isomers of q-DM-DHP 3, closed form 3a and open form 3b, were separated by reverse-phase HPLC, and their isolated UV–visible spectra were estimated. The chiral HPLC analyses of q-DM-DHP 3 indicated their planar chirality, and their CD spectra were measured. The photochromic properties and thermodynamic properties of 3 were also discussed based on their UV–visible, ¹H NMR, CD, and fluorescence spectra.     

Reaction of ferrocenecarboxylic acid with N,N-disubstituted carbodiimides: synthesis, spectroscopic and X-ray crystallographic analysis of N,N-disubstituted N-ferrocenoylureas and identification of a one-pot coupling reagent for the formation of ferrocenecarboxamides in a non-aqueous solvent

N,N^′-dicyclohexyl-N-ferrocenoylurea 2, N,N^′-diisopropyl-N-ferrocenoylurea 3, N,N^′-di-p-tolyl-N-ferrocenoylurea 4 and N,N^′-di-tert-butyl-N-ferrocenoylurea 5 were obtained by reaction of ferrocenecarboxylic acid 1 with N,N^′-dicyclohexylcarbodiimide (DCC), N,N^′-diisopropylcarbodiimide (DIC), N,N^′-di-p-tolylcarbodiimide 10 and N,N^′-di-tert-butylcarbodiimide 11, respectively. Both N-tert-butyl-N^′-ethyl-N-ferrocenoylurea 6 and N^′-tert-butyl-N-ethyl-N-ferrocenoylurea 7 were obtained by reaction of 1 with N-tert-butyl-N^′-ethylcarbodiimide 12. In all cases a small amount of ferrocenecarboxylic anhydride 8 was formed as a by-product. All compounds were characterized by ¹H NMR, ¹³C NMR, IR and MS. Single crystal X-ray structural analyses were made of 2, 3 and 4. From the consistent results, the reaction products of 1 with carbodiimides appear different from those proposed by some earlier workers. With N-(3-dimethylaminopropyl)-N^′-ethylcarbodiimidehydrochloride 9 ferrocenoylurea was not isolated, but the main product was rather 8. The suitability of 8 as acylation reagent was applied by using 9 to obtain N-(3-triethoxysilyl)-propylferrocenecarboxamide in a one-pot reaction from 1 and 3-(triethoxysilyl)-propylamine.     

Binuclear Salan borate compounds with three-coordinate boron atoms

A series of binuclear boron compounds supported by Salan(^tBu)H₄ ligands have been prepared. They are of the general formula Salan(^tBu)[B(OR)]₂. The compounds are Salean(^tBu)(BOR)₂ [Salean(^tBu) = (N,N′-ethylenebis(3,5-di-tert-butyl-salicylamine)), R = Me (1), SiMe₃ (4)], Salban(^tBu)(BOR)₂[Salban(^tBu) = (N,N′-butylenebis(3,5-di-tert-butyl-salicylamine)), R = Me (2), SiMe₃ (5)], and Salhan(^tBu)(BOR)₂ [Salhan(^tBu) = (N,N′-hexylenebis(3,5-di-tert-butyl-salicylamine)), R = Me (3)]. All of the compounds were characterized by spectroscopic (¹H NMR, ¹¹B NMR, IR) and physical (mp, EA) techniques. Also, 1, 2 and 4 were structurally characterized by single crystal X-ray diffraction studies.     

Synthesis and redox properties of novel ferrocenes with redox active 2,6-di-tert-butylphenol fragments: The first example of 2,6-di-tert-butylphenoxyl radicals in ferrocene system

Novel Schiff bases of ferrocenecarboxaldehyde bearing 2,6-di-tert-butyphenol fragments N-(3,5-di-tert-butyl-4-hydroxyphenyl)iminomethylferrocene (1) and N-(3,5-di-tert-butyl-4-hydroxybenzyl)iminomethylferrocene (2) have been synthesized and characterized. The oxidation of the compounds 1 and 2 by PbO₂ in solution leads to the formation of stable phenoxyl radicals 1′ and 2′ studied by EPR spectroscopy. The redox properties of ferrocenes 1 and 2 were studied using cyclic voltammetry.     

Functionalised linear and cross-linked polystyrenes from chloromethylated polymers through their organolithium derivatives

The lithiation of soluble (linear) and insoluble (cross-linked) chloromethylated polystyrene (1 and 15, respectively) with lithium and a catalytic amount of 4,4′-di-tert-butylbiphenyl (DTBB, 10 mol%) followed by reaction with different electrophiles leads to the formation, after final hydrolysis, of the corresponding functionalised polymers 2-12 and 16-32, respectively.     

Enantioselective synthesis of (1S,2S)-1,2-di-tert-butyl and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamines

An enantioselective synthesis of sterically congested 1,2-di-tert-butyl and 1,2-di-(1-adamantyl)ethylenediamines has been developed. Thus, diastereomerically pure trans-1-apocamphanecarbonyl-4,5-dimethoxy-2-imidazolidinones 6 and 7 were successfully prepared by optical resolution of (±)-trans-4,5-dimethoxy-2-imidazolidinone using apocamphanecarbonyl chloride (MAC-Cl) followed by stereospecific and stepwise substitution of the dimethoxyl groups using tert-butyl or 1-adamantyl cuprates to provide (4S,5S)-4,5-di-tert-butyl and (4R,5R)-4,5-di-(1-adamantyl)-2-imidazolidinones 12 and 15, respectively. Furthermore, N-acetyl 4,5-di-tert-butyl and 4,5-di-(1-adamantyl)-2-imidazolidinones 16a,b were enantioselectively deacetylated using a catalytic oxazaborolidine system to provide enantiopure 1-p-tolylsulfonyl-4,5-di-tert-butyl-2-imidazolidinones 12 and 19 and 1-p-tolylsulfonyl-4,5-di-(1-adamantyl)-2-imidazolidinones 18 and 20, respectively. Finally, N-p-tolylsulfonyl-2-imidazolidinones 12 and 15 were treated with 30 equiv of Ba(OH)₂·8H₂O to achieve ring cleavage and to provide (1S,2S)-1,2-di-tert-butylethylenediamine 3 and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamine 4.     

Selective uranyl ion detection by polymeric ion-selective electrodes based on salphenH2 derivatives

The new ion-selective electrodes (ISEs) based on salphenH₂ derivatives such as N,N′-(propylenedioxy)benzenebis(salicylideneimine) L¹ and N,N′-4,5-(propylenedioxy)benzenebis(3,5-di-tert-butylsalicylideneimine) L² as cation carriers are developed for a uranyl ion. The combination of these new ionophores with tris(2-ethylhexyl)phosphate (TEHP) as a plasticizer particularly shows near Nernstian slope in the wide concentration range (1.0 × 10⁻⁶ to 1.0 × 10⁻² M) of UO₂²⁺ and is observed well in the pH range from 1.0 to 5.0 with a response time less than 20 s. Since the employed ionophores were confirmed to form well-defined stable 1:1 complexes with UO₂²⁺, the observed high selectivity for a uranyl ion over the other cations was attributed to the selective complexation as well as the lipophilic behavior of these ligands especially for L². The proposed electrodes offered practically low detection limit of 6.5 × 10⁻⁷ M and reasonably good end-points within experimental error were obtained when the sensor was used as an indicator electrode for the potentiometric titration.     

Synthesis, structural, spectroscopic and reactivity properties of a new N-2,3,4-trifluorophenyl-3,5-di-tert-butylsalicylaldimine ligand and its Cu(II) and Pd(II) complexes

A new N-2,3,4-trifluorophenyl-3,5-di-tert-butylsalicylaldimine (1) complexes with Cu(II) (2) and Pd(II) (3) have been synthesized and characterized by X-ray crystallography, UV-Vis, IR, ¹H NMR and EPR spectroscopic techniques. The X-ray crystal structure of complex 2 reveals tetrahedrally distorted square-planar coordination geometry around Cu(II). The UV/Vis and EPR results indicate that the solid state geometry of 2 remains unchanged in solutions. Chemical oxidation of 3 with Ce(IV) in CHCl₃ generates relatively stable Pd(II)-phenoxyl radical complex (g = 2.0073). The results related with the chemical oxidation of 2 and 3 as well as the catalytic activity of 3 in the hydrogenation of PhNO₂ are presented.     

Synthesis,characterization and catalytic activity of halo-methyl-bis(salicylaldehyde)ethylenediamine cobalt(II) complexes

The synthesis, characterization and catalytic activity of a series of tetra-halo-dimethyl salen and di-halo-tetramethyl-salen ligands are reported in this paper: α,α′-dimethyl-Salen (dMeSalen) (L¹); 3,3′,5,5′-tetrachloro-α,α′-dimethyl-Salen, (tCldMeSalen) (L²); 3,3′-dibromo-5,5′-dichloro-α,α′-dimethyl-Salen, (dCldBrdMeSalen) (L³); 3,3′,5,5′-tetrabromo-α,α′-dimethyl-Salen, (tBrdMeSalen) (L⁴); 3,3′,5,5′-tetraiodo-α,α′-dimethyl-salen, (tIdMeSalen) (L⁵); 3,3′-dichloro-5,5′,α,α′-tetramethyl-Salen (dCltMeSalen) (L⁶); 3,3′-dibromo-5,5′,α,α′-tetramethyl-Salen (dBrtMeSalen) (L⁷); and 3,3′-diiodo-5,5′,α,α′-tetramethyl-Salen (dItMeSalen) (L⁸) (Salen = bis(salicylaldehyde)ethylenediamine). Upon reaction with Co(II) ions, these ligands form complexes with square planar geometry that have been characterized by elemental analysis, cyclic voltammetry, UV–Vis, IR and EPR spectroscopies. In the presence of pyridine the obtained Co(II) complexes were found able to bind reversibly O₂, which was shown by EPR spectroscopy and cyclic voltammetry. They were also found able to catalyze the oxidation of 2,6-di-tert-butylphenol (DtBuP) (9) with formation of 2,6-di-tert-butyl-1,4-benzoquinone (DtBuQ) (10) and 2,6,2′,6′-tetra-tert-butyl-1,1′-diphenobenzoquinone (TtBuDQ) (11). These properties are first influenced by the coordination of pyridine in axial position of the Co(II) ion that causes an increase of the electronic density on the cobalt ion and as a consequence a decrease in the E_1/2 value and an increase of the reducing power of the Co(II) complex. It is noteworthy that, under those conditions the complexes also show a remarkable quasi-reversible behaviour. Second, complex properties are also influenced by the substituents (methyl and halogen) grafted on the aromatic ring and on the azomethynic groups. The donating methyl substituent on the azomethynic groups causes a decrease in the E_1/2 value, whereas the halogen substituents on the aromatic rings have two effects: a mesomeric donating effect that tends to lower the redox potential of the complex, and a steric effect that tends to decrease the conjugation of the ligand and then to increase the redox potential of the Co(II) complex. In pyridine, the steric effect predominates, which causes both an increase of the redox potential and a decrease of the selectivity of the oxidation of phenol 9. As a result of all these effects, it then appears that the best catalysts to realize the selective oxidation of 2,6-di-tert-butyl-phenol (9) by O₂ are the Co complexes of ligands bearing CH₃ donating substituents, Co(dMeSalen) 1 (2CH₃ substituents), and Co-di-halo-tetra-methyl-salen complexes 6, 7 and 8 (4CH₃ substituents), in the presence of pyridine.     

Synthesis and characterization of three new thermally stable N-heterocyclic germylenes

Three new stable germylenes, rac-1,3-di-tert-butyl-4,5-dimethyl-1,3-diaza-2-germacyclopentane-2-ylide (1), 1,3-di-tert-butyl-4,4-dimethyl-1,3-diaza-2-germacyclopentane-2-ylide (2), and rac-1,3,4-tri-tert-butyl-1,3-diaza-2-germacyclopentane-2-ylide (3) have been synthesized by the reaction of their corresponding germyl dichlorides with elemental lithium. Full synthetic procedures and characterizations are described.     

Synthesis of aluminium complexes bearing a piperazine-based ligand system

Aluminium complexes bearing the N,N-chelating ligand 1,4-bis(2-hydroxy-3,5-di-tert-butyl)piperazine (1) have been synthesised. Both monometallic and bimetallic aluminium methyl complexes (2 and 3, respectively) were prepared by treatment of 1 with the appropriate amount of AlMe₃. Complex 2 can be converted to 3 by addition of excess AlMe₃. Bimetallic aluminium-ethyl complex 4 was also prepared. Treatment of 1 with AlEt₂Cl afforded the monometallic chloride complex 5. Treatment of this latter complex with potassium alkoxides (KOR, R = Me, Et, ⁱPr, ^tBu) or AgOTf afforded the corresponding aluminium alkoxide complexes (6, R = Et; 7, R = Me; 8, R = ⁱPr; 9, R = ^tBu; 10, R = OTf) in good yields. Aluminium ethoxide complex 6 was also synthesised by treatment of 1 with AlEt₂OEt. All of these complexes were tested as potential catalysts in the ring-opening polymerisation of rac-lactide and caprolactone with limited success.     

Oxidative addition reaction of o-quinones to triphenylantimony: novel triphenylantimony catecholate complexes

New catecholate Sb(V) complexes triphenyl(3,6-di-tert-butylcatecholato)antimony(V) Ph₃Sb(3,6-DBCat) (1) and triphenyl(perchloroxanthrenecatecholato)antimony(V) Ph₃Sb(^OXCat_Cl) (2) were synthesized by the oxidative addition reaction of corresponding o-quinones (3,6-di-tert-butyl-o-benzoquinone and perchloroxanthrenequinone-2,3) with triphenylantimony. Catecholates 1 and 2 can alternatively be synthesized by reacting the appropriate thallium catecholate with triphenylantimony dichloride. The oxidative addition reaction of an equimolar ratio of 4,4′-di-(3-methyl-6-tert-butyl-o-benzoquinone) and triphenylantimony yielded 4-(2-methyl-5-tert-butyl-cyclohexadien-1,5-dion-3,4-yl)-(3-methyl-6-tert-butyl-catecholato)triphenylantimony(V) Ph₃Sb(Cat-Q) (3); in the case of a 1:2 molar ratio, complex 4,4′-di-[(3-methyl-6-tert-butyl-catecholato)triphenylantimony(V)] Ph₃Sb(Cat-Cat)SbPh₃ (4) resulted. Complexes 1-4 were characterized by IR- and ¹H NMR spectroscopy. Molecular structures of 1, 2 and 4 were determined by X-ray crystallography to be a distorted tetragonal-pyramidal.     

Triphenylpyrylium salt-sensitized photoreactions of 1,4-diaryl-2,3-dioxabicyclo[2.2.2]octanes through competitive single electron-transfer pathway and proton-catalyzed pathway

2,4,6-Triphenylpyrylium tetrafluoroborate (TPPBF₄)-sensitized photoinduced electron-transfer (PET) reactions of 1,4-diaryl-2,3-dioxabicyclo[2.2.2]octanes 5 (a: Ar¹ = Ar² = p-MeOC₆H₄, b: Ar¹ = Ar² = p-MeC₆H₄, c: Ar¹ = Ar² = Ph) underwent novel fragmentation through their radical cations to give 1,4-diarylbutan-1,4-diones 6 accompanied by elimination of ethylene. On the other hand, 4-aryl-cyclohex-3-en-1-ones 7, p-substituted phenols 8, and 4-aryl-4-aryloxycyclohexanones 9 were produced through proton-catalyzed pathways when the PET reactions of 5 were performed in the absence of a certain base such as 2,6-di-tert-butylpyridine (DTBP). Particularly, the formation of 9 is consistent with the novel cationic rearrangement involving nucleophilic O-1,2-aryl shifts and C-1,4-aryl shifts.     

EPR study of mono-o-iminobenzosemiquinonato nickel(II) complexes with Ni-C σ-bond

New square-planar (Ph₃P)Ni^II(o-Tol)(ISQ-Prⁱ) (1), (Ph₃P)Ni^II(o-Tol)(ISQ-Me) (2), (Ph₃P)Ni^II(o-Tol)(ISQ-Bu^t) (3) nickel complexes (where ISQ-Prⁱ = 4,6-di-tert-butyl-N-(2,6-di-iso-propylphenyl)-o-iminobenzosemiquinonate, ISQ-Me = 4,6-di-tert-butyl-N-(2,6-di-methylphenyl)-o-iminobenzosemiquinonate, ISQ-Bu^t = 4,6-di-tert-butyl-N-(2,5-di-tert-butylphenyl)-o-iminobenzosemiquinonate, o-Tol = o-tolyl ligand) have been synthesized. Complexes contain σ-bound o-tolyl and neutral donor ligand Ph₃P. The sterical hindrances of N-aryl in o-iminobenzosemiquinonate ligands lead to the tetrahedral distortion of square-planar configurations of complexes as it was established using EPR spectroscopy.     

Synthesis and applications of tert-alkoxysiloxane linkers in solid-phase chemistry

Straightforward syntheses of two tert-alkoxysilyl chloride functionalised resins 3 and 31 that allow facile attachment of 1°, 2°, 3° alcohols and phenols to the solid-phase have been achieved. Resin 3 displayed useful loading levels (0.7 mmol/g), and it was stable to storage in activated form. Siloxanes from reaction of 3 with alcohols and phenols were compatible with a variety of reaction conditions commonly used in solid-phase synthesis.     

Salen and half-salen palladium(II) complexes: synthesis, characteriztion and catalytic activity toward Suzuki-Miyaura reaction

Salen and half-salen palladium(II) complexes (salden)Pd (1, salden=N,N′-bis(3,5-di- tert-butylsalicylidene)-1,2-dimethylethylenediamine), (hsalph)PdCl (2, hsalph=3,5-di-tert- butylsalicylidene-1-iminophenylene-2-amine), and (salph)Pd (4, salph=N,N′-bis(3,5-di-tert- butylsalicylidene)-1,2-phenylenediamine) were prepared and structurally characterized by X-ray crystallography. Complex 2 proved to exhibit high catalytic activity toward Suzuki-Miyaura reaction. Polyaromatic C₃-symmetric derivatives and various fluorinated biphenyl derivatives were readily achieved in good yields using Suzuki-Miyaura reaction catalyzed by complex 2.     

Synthesis and characterization of cyclopentadienyl/alkoxo titanium dichlorides: structural analysis of monocyclopentadienyl titanium dichlorides with ligands derived from menthol and borneol

A variety of monocyclopentadienyl alkoxo titanium dichloride and bisalkoxo titanium dichloride complexes have been prepared and characterized by spectroscopic techniques. The titanium derivatives containing both cyclopentadienyl and various alkoxo ligands [Ti(η⁵-C₅H₅)(OR)Cl₂] (1-5) have been synthesized from the reaction of [Ti(η⁵-C₅H₅)Cl₃] with 1 equivalent of the corresponding alcohol in THF in the presence of triethylamine (ROH = Adamantanol, 1R,2S,5R-(−)-menthol, 1S-endo-(−)-borneol, cis-1,3-(−)-benzylideneglycerol, 1,2:3,4-di-O-isopropylidene-α-d-galactopyranose). The bisalkoxo titanium dichloride derivatives [TiCl₂(OR)₂] (6-10) have been prepared by a redistribution reaction between Ti(OR)₄ and TiCl₄ compounds 6-8 (OR = Adamantanoxy, (1R,2S,5R)-(−)menthoxy, (1S-endo)-(−)-borneoxy) and by reaction of [Ti(OR)₂(OPrⁱ)₂]₂ with CH₃COCl compounds 9 and 10 (OR = 1,2:3,4-di-O-isopropylidene-α-d-galactopyranoxy, and 1,2:5,6-di-O-isopropylidene-α-d-glucofuranoxy). The molecular structures of 2 and 3 have been determined by single crystal X-ray diffraction studies.     

Reactions of [(Me3Si)3CAlMe2] with substituted benzoic acids. Isolation of a rare organoalumoxane carboxylate

The reactivity of bulky tris(trimethylsilyl)methyl group substituted aluminum trialkyl [(Me₃Si)₃CAlMe₂·THF] (1) with a series of substituted benzoic acid derivatives has been investigated. An equimolar reaction of 4-methyl benzoic acid or 4-tert-butyl benzoic acid with 1 in toluene at 50 °C leads to the formation of cyclic dimeric aluminum carboxylates [(Me₃Si)₃CAl(Me)(μ-O₂CC₆H₄R)]₂ (R = Me 2; ^tBu 3). Reaction of 3,5-di-iso-propylsalicylic acid (H₂dipsa) with 1 leads to the exclusive isolation of a trimeric organoaluminum carboxylate [(Me₃Si)₃CAl(μ-dipsa)]₃ (4), in which each aluminum is bound to two carboxylates, a phenoxide, and an alkyl group and produce a 12-membered macrocycle. Deliberate, but controlled, introduction of water in the form of 3,5-di-tert-butyl salicylic acid monohydrate (H₂dtbsa·H₂O) in the reaction with 1 in toluene leads to the isolation of carboxylate [(Me₃Si)₃CAl(μ-O)(μ-Hdtbsa)}₂] (5) with a bicyclic structure. Compound 5 represents a rare example of an organoalumoxane carboxylate that simultaneously possesses alkyl, oxo, and carboxylate moieties on aluminum.     

New organobimetallic compounds containing catecholate and o-semiquinolate ligands

New organobimetallic compounds CatSn[CpM(CO)_n]₂ (2-4) were obtained by the insertion of CatSn(II) (1) into the metal-metal bond of [CpM(CO)_n]₂ (Cat - 3,6-di-tert-butylcatecholate dianion; M = Fe (2), n = 2; M = Mo (3), W (4), n = 3). The structure of CatSn[CpMo(CO)₃]₂ was determined by X-ray analysis. The oxidation of compounds 2-4 with silver(I) triflate was found to produce stable paramagnetic o-semiquinolate derivatives which keep both Sn-M bonds. New paramagnetic tin(IV) complexes were investigated by EPR spectroscopy.