富马酸丙酚替诺福韦合成工艺改进

对富马酸丙酚替诺福韦的合成工艺进行了改进,以干燥的替诺福韦为起始原料,与亚磷酸三苯酯反应得到(R)-9-(2-(苯基磷酰基甲氧基)丙基)腺嘌呤（3）; 3被氯化亚砜氯代得(R)-9-(2-(((苯基)(氯代)(磷酰基)甲氧基)丙基)腺嘌呤（4）; 4与L-丙氨酸异丙酯盐酸盐缩合得9-((R)-2-(((S)-((1-(异丙氧基羰基)乙基)氨基)苯氧基磷酰基)甲氧基)丙基)腺嘌呤（5）; 5经析晶纯化得9-((R)-2-(((S)-（((S)-1-(异丙氧基羰基)乙基)氨基)苯氧基磷酰基)甲氧基)丙基)腺嘌呤（丙酚替诺福韦,6）; 6与富马酸成盐得富马酸丙酚替诺福韦,其结构经¹H NMR, ¹³C NMR, MS(ESI),元素分析和XRD确证。按改进工艺进行公斤级规模放大,产品总收率达到32.2%,化学纯度99.92%,非对映异构体纯度99.99%。     

Asymmetric synthesis of aziridines by reduction of N-tert-butanesulfinyl alpha-chloro imines

Reduction of (RS)-N-tert-butanesulfinyl alpha-halo imines afforded chiral aziridines in good to excellent yields. Upon reduction of (RS)-N-tert-butanesulfinyl alpha-halo imines with NaBH4 in THF, in the presence of 10 equiv of MeOH, (RS,S)-beta-halo sulfinamides were formed in excellent yield (up to 98%) with very good stereoselectivity (>98:2). Simple treatment of the latter (RS,S)-beta-halo-tert-butanesulfinamides with KOH afforded the corresponding (RS,S)-N-(tert-butylsulfinyl)aziridines in quantitative yields. On the contrary, its epimer, (RS,R)-N-(tert-butylsulfinyl)aziridine was synthesized by switchover of the reducing agent from NaBH4 to LiBHEt3. (RS,R)-N-(tert-Butylsulfinyl)aziridines were synthesized in good yields (up to 85%) and diastereoselectivity (up to 92:8) by reduction of (RS)-N-tert-butanesulfinyl alpha-halo imines with LiBHEt3 in dry THF and subsequent treatment with KOH. All chiral aziridines were obtained as a single diastereomer after recrystallization (overall yield up to 91%) or after flash chromatography.     

A collaborative study of four methods of assay of benzylpenicillin

The assay of benzylpenicillin by iodimetric titration, spectrophotometry with a mercury(II) chloride—imidazole reagent, titration with mercury(II) nitrate in acetate buffer solution, and titration with mercury(II) perchlorate in aqueous pyridine solution, was examined in four laboratories. The first two methods were applied to two samples (the third one being the reference sample), the mercury(II) nitrate titration to three, and the mercury(II) perchlorate method to two samples. The four methods gave very similar results, but the purity obtained with the mercury(II) perchlorate method was slightly lower, and this procedure is less desirable because pyridine is used as solvent. There were no great differences in the relative standard deviations of the four methods. The titration with mercury(II) nitrate is preferred because it is an absolute method.     

Photochemical activation of ruthenium(II)-pyridylamine complexes having a pyridine-N-oxide pendant toward oxygenation of organic substrates

Ruthenium(II)-acetonitrile complexes having η(3)-tris(2-pyridylmethyl)amine (TPA) with an uncoordinated pyridine ring and diimine such as 2,2'-bipyridine (bpy) and 2,2'-bipyrimidine (bpm), [Ru(II)(η(3)-TPA)(diimine)(CH(3)CN)](2+), reacted with m-chloroperbenzoic acid to afford corresponding Ru(II)-acetonitrile complexes having an uncoordinated pyridine-N-oxide arm, [Ru(II)(η(3)-TPA-O)(diimine)(CH(3)CN)](2+), with retention of the coordination environment. Photoirradiation of the acetonitrile complexes having diimine and the η(3)-TPA with the uncoordinated pyridine-N-oxide arm afforded a mixture of [Ru(II)(TPA)(diimine)](2+), intermediate-spin (S = 1) Ru(IV)-oxo complex with uncoordinated pyridine arm, and intermediate-spin Ru(IV)-oxo complex with uncoordinated pyridine-N-oxide arm. A Ru(II) complex bearing an oxygen-bound pyridine-N-oxide as a ligand and bpm as a diimine ligand was also obtained, and its crystal structure was determined by X-ray crystallography. Femtosecond laser flash photolysis of the isolated O-coordinated Ru(II)-pyridine-N-oxide complex has been investigated to reveal the photodynamics. The Ru(IV)-oxo complex with an uncoordinated pyridine moiety was alternatively prepared by reaction of the corresponding acetonitrile complex with 2,6-dichloropyridine-N-oxide (Cl(2)py-O) to identify the Ru(IV)-oxo species. The formation of Ru(IV)-oxo complexes was concluded to proceed via intermolecular oxygen atom transfer from the uncoordinated pyridine-N-oxide to a Ru(II) center on the basis of the results of the reaction with Cl(2)py-O and the concentration dependence of the consumption of the starting Ru(II) complexes having the uncoordinated pyridine-N-oxide moiety. Oxygenation reactions of organic substrates by [Ru(II)(η(3)-TPA-O)(diimine)(CH(3)CN)](2+) were examined under irradiation (at 420 ± 5 nm) and showed selective allylic oxygenation of cyclohexene to give cyclohexen-1-ol and cyclohexen-1-one and cumene oxygenation to afford cumyl alcohol and acetophenone.     

Preparation of I2@SWNTs: synthesis and spectroscopic characterization of I2-loaded SWNTs

X-ray photoelectron spectroscopy (XPS) along with inductively coupled plasma analysis (ICP-AE) and Raman spectroscopy have been used to define the location and to quantify the amount of iodine in HiPco SWNT samples loaded with molecular I(2) via sublimation (I(2)-SWNTs). The exterior-adsorbed I(2) can be removed (as I(-)) by reducing the sample of filled nanotubes with Na(0)/THF or by heating the I(2)-SWNTs to 300 degrees C (without reduction), leaving I(2) contained only within the interior of the SWNTs (I(2)@SWNTs) as proven by XPS. These I(2)@SWNTs contain approximately 25 wt % of I(2) and are stable without the loss of I(2) even after exposure to additional reduction with Na(0)/THF or upon heating to ca. 500 degrees C.     

Pseudo Jahn-Teller origin of nonplanarity and rectangular-ring structure of tetrafluorocyclobutadiene

It is shown that the pseudo Jahn-Teller effect (PJTE) in combination with ab initio calculations explains the origin of instability of the planar configuration of tetrafluorocyclobutadiene, C(4)F(4), with respect to a puckered structure and square-to-rectangle distortion of the carbon ring, and rationalizes its difference from the planar-rectangular geometry of C(4)H(4) and nonplanar (puckered) structure of Si(4)H(4). The two types of instability and distortion of the high-symmetry D(4h) configuration in these systems emerge from the PJT coupling of the ground B(2g) state with the excited A(1g) term producing instability along the b(2g) coordinate (elongation of the carbon or silicon square ring), and with the excited E(g) term resulting in e(g) (puckering) distortion. A rhombic distortion b(1g) of the ring is also possible due to the coupling between excited A(1g) and B(1g) terms. For C(4)F(4), ab initio calculations of the energy profiles allowed us to evaluate the PJTE constants and to show that the two instabilities, square-to-tetragonal b(2g) and puckering e(g) coexist, thus explaining the origin of the observed geometry of this system in the ground state. The preferred cis-trans (e(g) type) puckering in C(4)F(4) versus trans-trans puckering (b(2u) distortion) in Si(4)H(4) follows from the differences in the energy gaps to their excited electronic E(g) and A(1u) terms causing different PJTE in these two cases.     

Reaction of sulphoximides with diazomalonate in the presence of Cu-salt : A new synthesis and stereochemistry of optically active oxosulphonium ylides

Sulphoximides (Ia–Ie) were found to react with dimethyl diazomalonate (DDM) in the presence of a catalytic amount of Cu-salts affording the corresponding oxosulphonium ylides in moderate yields. The reaction did not proceed at all under irradiation of UV light. (?)-Methylphenyloxosulphonium bis(methoxycarbonyl)-methylide ((?)-IIb) was obtained from (+)-(S)-methylphenylsulphoximide ((+)-(S)-Ib) together with (?)-(S)-methyl phenyl sulphoxide ((?)-(S)-IIIb) by this reaction. Hydrolysis of (?)-IIb gave (+)-methylphenyloxosulphonium methoxycarbonylmethylide ((+)-IIf) which was converted to (?)-(S)-IIIb upon treatment with dibenzoylethylene. Stereochemical cycle starting from (+)-(S)-Ib to (?)-(S)-IIIb was established and the absolute configurations of both ylides, (?)-IIb and (+)-IIf were assigned as (R)-configuration. The stereochemical courses, namely from (+)-(S)-Ib or (?)-(S)-IIIb to (?)-(R)-IIb or (+)-(R)-IIf to (?)-(S)-IIIb were determined as retention processes. The optical purities of the oxosulphonium ylides obtained from both reactions, (+)-(S)-Ib→(?)-(R)-IIb and (?)-(S)-IIIb→(?)-(R)-IIb, were almost equal. These results indicate that the mechanism of the reaction of sulphoximides with carbenes (or carbenoids) involves the initial formation of the sulphoxides which react subsequently with carbenes to afford the final products.     

Use of a chiral surfactant for enantioselective reduction of a ketone

The influence of a chiral surfactant and a polymer-supported chiral additive on reduction of ketones using sodium borohydride will be described. Initial preparations involved methylation of (S)-leucinol to give (2S)-N , N-dimethyl-2-amino-4-methyl-1-pentanol (1) (67%). The chiral surfactant (2) was synthesized by reacting (1) with bromohexadecane (71%). The functionalized styrene for the polymer-supported chiral additive (5) was synthesized by reacting (1) with 4-vinylbenzyl chloride. Polymerization was carried out with 10% of the functionalized monomer (4), 5% cross-linking agent divinylbenzene, and 85% styrene with AIBN as the initiator. The activity of the chiral surfactant and polymeric additive were examined by using them as additives in a standard reduction of 2-pentanone with sodium borohydride to yield (R)- and (S)-2-pentanol (3) (20%). The resulting alcohol was analyzed by polarimetry (ee 9.5%) and also esterified with (2S)-methylbutyric acid prior to characterization by NMR. 13C NMR indicated an enantiomeric excess of 5.2% when the chiral surfactant was used, and 7% when the polymeric additive was used.     

Investigation of the mechanism of formation of a thiolate-ligated Fe(III)-OOH

Kinetic studies aimed at determining the most probable mechanism for the proton-dependent [Fe(II)(S(Me2)N(4)(tren))](+) (1) promoted reduction of superoxide via a thiolate-ligated hydroperoxo intermediate [Fe(III)(S(Me2)N(4)(tren))(OOH)](+) (2) are described. Rate laws are derived for three proposed mechanisms, and it is shown that they should conceivably be distinguishable by kinetics. For weak proton donors with pK(a(HA)) > pK(a(HO(2))) rates are shown to correlate with proton donor pK(a), and display first-order dependence on iron, and half-order dependence on superoxide and proton donor HA. Proton donors acidic enough to convert O(2)(-) to HO(2) (in tetrahydrofuran, THF), that is, those with pK(a(HA)) < pK(a(HO(2))), are shown to display first-order dependence on both superoxide and iron, and rates which are independent of proton donor concentration. Relative pK(a) values were determined in THF by measuring equilibrium ion pair acidity constants using established methods. Rates of hydroperoxo 2 formation displays no apparent deuterium isotope effect, and bases, such as methoxide, are shown to inhibit the formation of 2. Rate constants for p-substituted phenols are shown to correlate linearly with the Hammett substituent constants σ(-). Activation parameters ((ΔH(++) = 2.8 kcal/mol, ΔS(++) = -31 eu) are shown to be consistent with a low-barrier associative mechanism that does not involve extensive bond cleavage. Together, these data are shown to be most consistent with a mechanism involving the addition of HO(2) to 1 with concomitant oxidation of the metal ion, and reduction of superoxide (an "oxidative addition" of sorts), in the rate-determining step. Activation parameters for MeOH- (ΔH(++) = 13.2 kcal/mol and ΔS(++) = -24.3 eu), and acetic acid- (ΔH(++) = 8.3 kcal/mol and ΔS(++) = -34 eu) promoted release of H(2)O(2) to afford solvent-bound [Fe(III)(S(Me2)N(4)(tren))(OMe)](+) (3) and [Fe(III)(S(Me2)N(4)(tren))(O(H)Me)](+) (4), respectively, are shown to be more consistent with a reaction involving rate-limiting protonation of an Fe(III)-OOH, than with one involving rate-limiting O-O bond cleavage. The observed deuterium isotope effect (k(H)/k(D) = 3.1) is also consistent with this mechanism.     

Selective surface decoration of corannulene

The reaction of corannulene (C(20)H(10)) with 1,2-C(2)H(4)Hal(2) (Hal = Cl or Br) in the presence of AlCl(3) affords stable nonplanar carbocations C(20)H(10)CH(2)CH(2)Hal(+) (Hal = Cl (1) and Br (2)) with an -CH(2)CH(2)Hal moiety attached to the interior carbon atom of the bowl. In the analogous reaction with 1-bromo-2-chloroethane, the selective (up to 98%) abstraction of chloride is observed with the formation of cation 2. The molecular structures of bowl-shaped carbocations 1 and 2 crystallized as salts with AlCl(4)(-) counterions are revealed by single-crystal X-ray diffraction. The reaction of 2 with methanol or ethanol provides further decoration of the nonplanar polyarene upon the nucleophilic addition of alkoxy groups to the exterior carbon atom of the corannulene moiety. The (1)H NMR investigation of the corresponding products, C(20)H(10)(CH(2)CH(2)Br)(OCH(2)R) (R = H (3) and CH(3) (4)), shows the formation of intramolecular H···O and H···Br hydrogen bonds.     

The role of nickelole intermediates in the oligomerization of alkynes

Bis(triphenylphosphine)nickel(II) chloride reacts with E,E,-1,4-dilithio-1,2,3,4-tetraphenylbutadiene to yield a solution of a 2,3,4,5-tetraphenylnickelole complex. This compound reacts promptly with CO to yield tetracyclone, with dimethyl acetylenedicarboxylate to form dimethyl tetraphenylphthalate and catalytically with diphenylacetylene to form hexaphenylbenzene. A similar treatment of (1,2-bis(diphenylphosphino)ethane)nickel(II) chloride with the lithium reagent led to the isolation of (1,2-bis(diphenylphosphino)ethane)bis(2,3,4,5-tetraphenylnickelole), which likewise reacts with dimethyl acetylenedicarboxylate to yield dimethyl tetraphenylphthalate. These results support the interpretation that nickeloles are reactive intermediates in the cyclotrimerization of alkynes by nickel(0) catalysts.     

Synthesis of hexagonal ZnO clubs with opposite faces of unequal dimensions for the photoanode of dye-sensitized solar cells

Novel sub-micro sized hexagonal clubs of ZnO (HC-ZnO), which are coated as a scattering layer (SL) for the photoanode of a DSSC, are synthesized. X-ray diffraction (XRD) patterns of the ZnO clubs show clear peaks corresponding to wurtzite crystal phase of ZnO. Scanning electron microscopic (SEM) images show that each club has two opposite hexagonal faces (parts) of unequal dimensions. High resolution transmission electron microscopic (HR-TEM) image of a single ZnO club reveals that the ZnO is single crystalline and has wurtzite crystal structure; the image indicates a lattice spacing (d) of 0.26 nm; this is ascribed to the (002) planar spacing of the hexagonal ZnO. A solar-to-electricity conversion efficiency (η) of 3.36% is achieved for the cell with the double layer (DL) film, which is 16% higher than that of the cell with only transparent layer (TL) of commercial ZnO (2.89%) and far higher than that of the cell with SL (0.05%). The η of the cell with the DL (3.36%) could further be improved to 4.28% through the modification of the DL surface with TiO(x). Incident photo-to-current conversion efficiency (IPCE) curves, UV-vis absorption spectra, energy dispersive X-ray (EDX) spectra, and electrochemical impedance spectra (EIS) are also used to substantiate the results.     

Self-aggregation of binary mixtures of alkyltriphenylphosphonium bromides: a critical assessment in favor of more than one kind of micelle formation

The micellization behavior of binary combinations of alkyltriphenylphosphonium bromides (ATPBs) with alkyl chain carbons 10, 12, 14, and 16 has been studied by conductometry and calorimetry. The combinations C(10)-C(12), C(10)-C(14), C(10)-C(16), C(12)-C(14), C(12)-C(16), and C(14)-C(16) were found to form two cmc's by both the methods, with good agreement, except C(14)-C(16)TPB, which has evidenced only a single cmc by calorimetry for all combinations. The combinations C(10)-C(12) (for both cmc(1) and cmc(2)) and C(10)-C(14)TPB (for cmc(2)) formed ideal mixtures, whereas the rest were nonideal. In the nonideal binary mixtures, the ATPB components showed antagonistic interaction with each other. The cmc, interaction parameter (beta), mixed micellar composition, extent of counterion binding, and thermodynamic parameters for the micellization process have been reported and discussed. The enthalpy of mixed micelle formation has been found to have a fair correlation with a Clint-type relation applicable to ideal binary mixtures of surfactants.     

Sigma-borane complexes of iridium: synthesis and structural characterization

Reaction of NaBH4 with (tBuPOCOP)IrHCl affords the previously reported complex (tBuPOCOP)IrH2(BH3) (1) (tBuPOCOP = kappa(3)-C6H3-1,3-[OP(tBu)2]2). The structure of 1 determined from neutron diffraction data contains a B-H sigma-bond to iridium with an elongated B-H bond distance of 1.45(5) A. Compound 1 crystallizes in the space group P1 (Z = 2) with a = 8.262 (5) A, b = 12.264 (5) A, c = 13.394 (4) A, and V = 1256.2 (1) A(3) (30 K). Complex 1 can also be prepared by reaction of BH3 x THF with (tBuPOCOP)IrH2. Reaction of (tBuPOCOP)IrH2 with pinacol borane gave initially complex 2, which is assigned a structure analogous to that of 1 based on spectroscopic measurements. Complex 2 evolves H2 at room temperature leading to the borane complex 3, which is formed cleanly when 2 is subjected to dynamic vacuum. The structure of 3 has been determined by X-ray diffraction and consists of the (tBuPOCOP)Ir core with a sigma-bound pinacol borane ligand in an approximately square planar complex. Compound 3 crystallizes in the space group C2/c (Z = 4) with a = 41.2238 (2) A, b = 11.1233 (2) A, c = 14.6122 (3) A, and V = 6700.21 (19) A(3) (130 K). Reaction of (tBuPOCOP)IrH2 with 9-borobicyclononane (9-BBN) affords complex 4. Complex 4 displays (1)H NMR resonances analogous to 1 and exists in equilibrium with (tBuPOCOP)IrH2 in THF solutions.     

Synthesis of phthalide derivatives using nickel-catalyzed cyclization of o-haloesters with aldehydes

The reaction of o-bromobenzoate (1 b) with benzaldehyde (2 a) in the presence of [NiBr(2)(dppe)] (dppe=1,2-bis(diphenylphosphino)ethane) and zinc powder in THF (24 hours, reflux temperature), afforded 3-phenyl-3H-isobenzofuran-1-one (3 a) in an 86 % yield. Similarly, o-iodobenzoate reacts with 2 a to give 3 a, but in a lower yield (50 %). A series of substituted aromatic and aliphatic aldehydes (2 b, 4-MeC(6)H(4)CHO; 2 c, 4-MeOC(6)H(4)CHO; 2 d, 3-MeOC(6)H(4)CHO; 2 e, 2-MeOC(6)H(4)CHO; 2 f, 4-CNC(6)H(4)CHO; 2 g, 4-(Me)(3)CC(6)H(4)CHO; 2 h, 4-C(6)H(5)C(6)H(4)CHO; 2 i, 4-ClC(6)H(4)CHO; 2 j, 4-CF(3)C(6)H(4)CHO; 2 k, CH(3)(CH(2))(5)CHO; 2 l, CH(3)(CH(2))(2)CHO) also underwent cyclization with o-bromobenzoate (1 b) producing the corresponding phthalide derivatives in moderate to excellent yields and with high chemoselectivity. Like 1 b, methyl 2-bromo-4,5-dimethoxybenzoate (1 c) reacts with tolualdehyde (2 b) to give the corresponding substituted phthalide 3 m in a 71 % yield. The methodology can be further applied to the synthesis of six-membered lactones. The reaction of methyl 2-(2-bromophenyl)acetate (1 d) with benzaldehyde under similar reaction conditions afforded six-membered lactone 3 o in a 68 % yield. A possible catalytic mechanism for this cyclization is also proposed.     

Application of extraction chromatography to the separation of thorium and uranium dissolved in a solution of high salt concentration

Extraction chromatography with commercially available UTEVA resin (for uranium and tetravalent actinide) was applied for the separation of Th and U from control solutions prepared from a multi-element control solution and from sample solutions of solidified simulated waste. Thorium and U in control solutions with 1-5mol/dm(3) HNO(3) were extracted with UTEVA resin and recovered with a solution containing 0.1mol/dm(3) HNO(3) and 0.05mol/dm(3) oxalic acid to be separated from the other metallic elements. Extraction behavior of U in the sample solutions was similar to that in the control solutions, but extraction of Th was dependent on the concentration of HNO(3). Thorium was extracted from 5mol/dm(3) HNO(3) sample solutions but not from 1mol/dm(3) HNO(3) sample solutions. We conjecture that thorium fluoride formation interferes with extraction of Th. Addition of Al(NO(3))(3) and Fe(NO(3))(3), which have higher stability constant with fluoride ion than Th, does improve extractability of Th from 1mol/dm(3) HNO(3) sample solution.     

Accelerating and decelerating effects of metal ions on electron-transfer reduction of quinones as a function of temperature and binding modes of metal ions to semiquinone radical anions

The accelerating effect of Sc(3+) on the electron-transfer (ET) reduction of the p-benzoquinone derivative 1-(p-tolylsulfinyl)-2,5-benzoquinone (TolSQ) by 10,10'-dimethyl-9,9'-biacridine ((AcrH)(2)) at 233 K changes to a decelerating effect with increasing reaction temperature; the observed second-order rate constant k(et) decreases with increasing Sc(3+) concentration at high concentrations of Sc(3+) at 298 K. At 263 K the k(et) value remains constant with increasing Sc(3+) concentration. Such a remarkable difference with regard to dependence of k(et) on [Sc(3+)] between low and high temperatures results from the difference in relative activity of two ET pathways that depend on temperature, one of which affords 1:1 complex TolSQ*(-)-Sc(3+), and the other 1:2 complex TolSQ*(-)-(Sc(3+))(2) with additional binding of Sc(3+) to TolSQ*(-)-Sc(3+). The formation of TolSQ*(-)-Sc(3+) and TolSQ*(-)-(Sc(3+))(2) complexes was confirmed by EPR spectroscopy in the ET reduction of TolSQ in the presence of low and high concentrations of Sc(3+), respectively. The effects of metal ions on other ET reactions of quinones to afford 1:1 and 1:2 complexes between semiquinone radical anions and metal ions are also reported. The ET pathway affording the 1:2 complexes has smaller activation enthalpies DeltaH( not equal) and more negative activation entropies DeltaS( not equal) because of stronger binding of metal ions and more restricted geometries of the ET transition states as compared with the ET pathway to afford the 1:1 complexes.     

FTIR spectroscopic study of titanium-containing mesoporous silicate materials

The surface acidity of different mesoporous titanium-silicates, such as well-organized hexagonally packed Ti-MMM, Ti-MMM-2, Ti-SBA-15, and amorphous TiO(2)-SiO(2) mixed oxides (aerogels and xerogels), was studied by means of FTIR spectroscopy of CO adsorbed at 80 K and CD(3)CN adsorbed at 293 K. The surface hydroxyl groups of mesoporous titanium-silicates with 2-7 wt % Ti revealed a Br?nsted acidity slightly higher to that of pure silicate. TiO(2)-SiO(2) xerogels revealed the highest Br?nsted acidity among the titanium-silicates studied. CO adsorption revealed two additional sites on the surface in comparison to pure silicate, characterized by nu(CO) from 2185 (high pressure) to 2178 (low pressure) cm(-1) and from 2174 (high pressure) to 2170 (low pressure) cm(-1). These bands are due to CO adsorbed on isolated titanium cations in the silica surrounding or having one Ti(4+) cation in their second coordination sphere and due to CO interactions with Ti-OH groups, respectively. CD(3)CN adsorption similarly revealed the existence of two additional sites, which were not detected for pure silicate: at 2289 cm(-1) due to CD(3)CN interaction with titanol groups and from 2306 (low pressure) to 2300 (high pressure) cm(-1) due to acetonitrile interaction with isolated framework titanium cations with probably one Ti(4+) cation in their second coordination shell. The spectroscopic results are compared with computational data obtained on cluster models of titanium-silicate with different titanium content. According to the IR data, the Ti accessibility on the surfaces for mesoporous titanium-silicates with similar Ti loading (2 wt %) was found to fall in the order TiO(2)-SiO(2) aerogel approximately TiO(2)-SiO(2) xerogel > Ti-MMM approximately Ti-MMM-2 > Ti-SBA-15. This order (except TiO(2)-SiO(2) xerogel) correlates with the catalytic activity found previously for titanium-silicates in 2,3,6-trimethylphenol oxidation with H(2)O(2).     

Determination of oxygen triple isotope ratios of silicates without cryogenic separation of NF3- technique with application to analyses of technical O2 gas and meteorite classification

A novel technique is described to determine Delta'(17)O(TFL) with high accuracy and precision by using infrared (IR) laser fluorination with F(2) as the reaction gas. The technique includes precise monitoring of the intensity ratio of the (14)NF(2)+ (m/z 52) to O(2) signals. The correlation between the intensity of (14)NF(2) + and positive error in delta(17)O(VSMOW) allows correction of measured data to obtain reliable Delta'(17)O(TFL) values. The resultant error in Delta'(17)O(TFL) of a single measurement after correction is in the range of +/-0.06 per thousand, i.e. sufficiently small to permit the technique to be useful for meteorite classification. Our data for technical O(2), in combination with literature data, suggest a negative anomaly of tropospheric air O(2) with Delta'(17)O(TFL) = -0.344 +/- 0.015 per thousand (1sigma).     

Collective mechanical behavior of multilayer colloidal arrays of hollow nanoparticles

The collective mechanical behavior of multilayer colloidal arrays of hollow silica nanoparticles (HSNP) is explored under spherical nanoindentation through a combination of experimental, numerical, and theoretical approaches. The effective indentation modulus E(ind) is found to decrease with an increasing number of layers in a nonlinear manner. The indentation force versus penetration depth behavior for multilayer hollow particle arrays is predicted by an approximate analytical model based on the spring stiffness of the individual particles and the multipoint, multiparticle interactions as well as force transmission between the layers. The model is in good agreement with experiments and with detailed finite element simulations. The ability to tune the effective indentation modulus, E(ind), of the multilayer arrays by manipulating particle geometry and layering is revealed through the model, where E(ind) = (0.725m(-3/2) + 0.275)E(mon) and E(mon) is the monolayer modulus and m is number of layers. E(ind) is seen to plateau with increasing m to E(ind_plateau) = 0.275E(mon) and E(mon) scales with (t/R)(2), t being the particle shell thickness and R being the particle radius. The scaling law governing the nonlinear decrease in indentation modulus with an increase in layer number (E(ind) scaling with m(-3/2)) is found to be similar to that governing the indentation modulus of thin solid films E(ind_solid) on a stiff substrate (where E(ind_solid) scales with h(-1.4) and also decreases until reaching a plateau value) which also decreases with an increase in film thickness h. However, the mechanisms underlying this trend for the colloidal array are clearly different, where discrete particle-to-particle interactions govern the colloidal array behavior in contrast to the substrate constraint on deformation, which governs the thickness dependence of the continuous thin film indentation modulus.