Synthesis and electrochemical properties of dendrimers containing meta-terphenyl peripheral groups and a 4,4′-bipyridinium core

Fréchet-type poly(arylether) dendrons carrying m-terphenyl peripheral groups were synthesized up to second generation by convergent methodology. Simple quarternisation of 4,4′-bipyridine with the dendritic bromides afforded the corresponding dendrimers containing a 4,4′-bipyridine core. The electrochemical parameters were obtained for all the dendrimers and the half-wave potentials of both the first and second redox processes shift to less-negative values as the dendrimer generation increases.     

Binding of monomeric and dimeric Concanavalin A to mannose-functionalized dendrimers

Because of the central role of Concanavalin A (Con A) in the study of protein-carbohydrate interactions, a thorough understanding of the multivalent functions of Con A is imperative. Here, the association of monomeric and dimeric derivatives of Con A with mannose-functionalized generation two through six PAMAM dendrimers is reported. Hemagglutination assay results indicate relatively low activity of the dendrimers for monomeric Con A, with small increases as the dendrimer generation increases. Isothermal titration microcalorimetry experiments indicate monovalent binding by the dendrimers with monomeric Con A and divalent binding by the dendrimers with dimeric Con A. Continuous (and comparable) but narrowing increases in enthalpy and entropy and the slight increase in association constants with monomeric Con A as the dendrimer generation increases suggest favorable proximity effects on binding. Both the hemagglutination assay and the calorimetry experiments suggest that statistical binding enhancements can be observed with monomeric Con A. The results described here should allow for a more quantitative evaluation of the enhancements that are often observed in protein-carbohydrate interactions for glycosylated frameworks binding to Con A.     

Electrical resistance and heat generation of polypyrrole‐coated polyacrylonitrile nanofibrous and regular fibrous mats

This article reports the effect of fiber diameter on the electrical resistance and heat generation of fibrous polyacrylonitrile (PAN) mats coated with polypyrrole during chemical in situ polymerization. Polypyrrole is one of the important intrinsically conducting polymers that perform similar to semiconductors. The electrical resistance of polypyrrole‐coated mats depends on the fiber diameter, the applied pressure on the surface of the mats, and the mat thickness. The electrical resistance of polypyrrole‐coated PAN fibrous mats decreases as fiber diameter decreases. Moreover, electrical resistance decreases considerably as the mat thickness as well as the applied pressure on it increases. It was also observed that the heat generated in polypyrrole‐coated PAN fibrous mats increases with voltage and duration of the applied voltage. Lower fiber diameter also leads to higher heat generation. Furthermore, electrical current increases rapidly in the initial stages of applying voltage and then shows a marginal increase. Considering their high specific surface area, nanofibers convey considerable improvement in the electrical conductivity as well as heat generation capacity of the mats made from them. Copyright © 2011 John Wiley & Sons, Ltd.     

Photoacid generators (PAGs) based on N-acyl-N-phenylhydroxylamines for carboxylic and sulfonic acids

Simple and efficient photoacid generators (PAGs) for carboxylic and sulfonic acids based on N-acyl-N-phenylhydroxylamines have been demonstrated. Irradiation of o-carboxylates and thermally rearranged o-arenesulfonates of N-acyl-N-phenylhydroxylamines using UV light (≥254 nm) in aqueous methanolic solution resulted in efficient generation of carboxylic and sulfonic acids, respectively. The carboxylic acid generation ability of N-acyl-N-phenylhydroxylamines was found to be dependent on their N-acyl substituents. Further, polymer bearing o-arenesulfonates of N-acyl-N-phenylhydroxylamine was synthesized and demonstrated as PAG for sulfonic acids.     

Molecular modeling simulations of the morphology of polyphenylene dendrimers

Three polyphenylene dendrimers were studied by molecular modeling techniques with the goal of better defining the notion of shape persistence often associated with these molecules. We show that despite the rigidity of the monomers, a large variety of dendrimer morphologies is accessible, in large part due to the asymmetrical branching pattern of the monomers (they have nodes in meta and para positions with respect to their anchor point). The folding ability of a branch depends on the number and sequence of the meta and para nodes it contains: while some of the branches are always straight, others can fold back, and the amplitude of that folding increases with generation. As a result, the range of accessible morphologies increases with the generation, from a dense-shell model in low generation to a model intermediate between a dense shell and a dense core in high generation. When the typical A2B monomer is replaced by an A4B monomer, the dense packing limit is reached as early as the second generation because of a higher density and the presence of nodes in the ortho position, which are oriented backward.     

树形聚酰胺胺与 Cu2＋的络合作用

合成了4.0代聚酰胺胺 (PAMAM)树形分子 ,并合成出端基为羟基的PAMAM树形分子衍生物。用分光光度法研究了4.0代PAMAM树形分子及其衍生物与Cu2 的络合作用。结果表明当存在树形聚酰胺胺分子时 ,Cu2 水溶液的最大吸收波长显著紫移 ,随n(Cu2 )/n(PAMAM)增加 ,最大吸收波长红移 ;PAMAM树形分子与Cu2 的络合作用有多种形式 ,对端胺基树形分子主要存在Cu -N4 和Cu -N2 两种配位方式 ;对端羟基树形分子主要存在Cu -N2 的配位方式 ;随Cu2 的加入 ,络合形式和各种络合形式的相对比例发生变化 ;pH对络合形式有较大影响;随代数的增加 ,树形分子所能络合Cu2 的最大数目不断增加 ,但理论值与实验值有一定的误差     

2,4,6-Tris(4-iodophenoxy)-1,3,5-triazine as a new recyclable “iodoarene” for in situ generation of hypervalent iodine(III) reagent for α-tosyloxylation of enolizable ketones

The synthesis of 2,4,6-tris[(4-iodo)phenoxy)]-1,3,5-triazine 6, as a new recyclable nonpolymeric analogue of iodobenzene is achieved using the reaction of 2,4,6-trichloro-1,3,5-triazine with 4-iodophenol in the presence of KOH. The application of 6 as a recyclable ‘iodoarene’ is demonstrated for α-tosyloxylation of enolizable ketones via in situ generation of hypervalent iodine(III) species using PTSA and MCPBA as the terminal oxidant. The recyclability of the reagent 6 was possible owing to the facile recovery and reuse from the reaction mixture due to its near insolubility in methanol.     

Nanodiamonds as photocatalysts for reduction of water and graphene oxide

Detonated nanodiamonds (NDs) exhibit remarkable photocatalytic activity towards the hydrogen gas generation upon 532 nm laser pulse irradiation. Hydrogenation dramatically increases the quantum yield, suggesting that hydrogen-terminated sites work as electron reservoirs. NDs can also be used as effective photocatalysts to reduce graphene oxide. The resulting composites exhibit high and stable photocurrent generation upon visible light irradiation.     

Short, stereoselective synthesis of C-glycosyl asparagines via an olefin cross-metathesis

The Grubbs second generation ruthenium catalyst was employed for the cross metathesis between α- and β-C-allyl glycosides and suitably protected l-vinyl glycines to furnish olefinic products in 57-94% yields. Hydrogenation afforded the C-glycosyl asparagines in high yield.     

掺硼金刚石膜电极表面产生羟基自由基的原位ESR研究

建立了原位电化学-电子顺磁共振(ESR)方法,系统研究了掺硼金刚石(BDD)膜电极表面在水溶液中的羟基自由基(·OH)产生规律.结果表明,在高于析氧电位时,·OH的生成速率随着阳极电位的升高、电流密度的增加而增大,增加速率逐渐减缓.与此同时,与氢终端的BDD膜电极相比,氧终端的BDD膜电极表面因具有较好的亲水性而具有更高的·OH产生能力.在电化学氧化处理有机废水的过程中,电极表面处于氧终端的状态,有利于·OH产生并保持较高的活性.溶液pH值也在一定程度上影响·OH生成反应,酸性溶液中,BDD膜电极表面的·OH产生能力强于在中性或碱性溶液中.进一步研究发现,BDD膜电极表面还可能生成O3-·0自由基.本研究为深入探索BDD膜电极表面·OH的产生机制提供了研究手段,为阐述BDD膜电极电极在污染物处理中高效性的本质提供了有效的证据.     

"Lego" chemistry for the straightforward synthesis of dendrimers

A new straightforward method of synthesis of dendrimers, using two branched monomers (CA(2) and DB(2)), is described. Each generation is obtained in a single quantitative step, with only N(2) or H(2)O as byproducts; generation 4 is obtained in only four steps. The end groups are alternatively phosphines and hydrazines; their versatile reactivity is illustrated by the reaction of generation 4 with a branched CD(5) monomer, which increases the number of end groups in a single step from 48 to 250.     

不同代数超支化聚胺酯的制备及其在钕纳米粒子制备中的应用

以N，N-二羟乙基-3-胺基丙酸甲酯单体和季戊四醇（核）为原料，采用“准一步法”合成了具有端羟基的超支化聚胺酯（HPAE）。采用凝胶色谱、红外光谱、核磁共振和热重分析等对其进行了结构表征及性能探究。再以HPAE封装稀土粒子钕（Nd），制备出Nd复合纳米粒子，透射电镜（TEM）分析结果表明：随着HPAE代数增大，Nd纳米颗粒粒径越均匀，分散度越好。     

Morphological studies and ionic transport properties of partially sulfonated diblock copolymers

The morphological behavior of partially sulfonated polystyrene-block-poly(ethylene-alt-propylene) (PS-PEP) membranes cast from tetrahydrofuran (THF) solutions were investigated by small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM).The uptakes of methanol and water increase as the sulfonation degree increases, the methanol uptake being overwhelmingly greater than the water uptake. The conductivity increases almost exponentially with increasing sulfonation degree of polystyrene units. Clusters of sulfonated units that are formed in the solution used for casting membranes persist in the solid state after evaporation. In contact with water, swelling of the membranes proceeds predominantly in these clusters. The original lamellar morphology of the diblock copolymer is progressively deformed with increasing degree of sulfonation by the presence of the clusters containing ion-rich sequences of sulfonated polystyrene blocks.     

The changes in particle charge distribution during rapid growth of particles in the plasma reactor

The changes in particle charging were investigated during the rapid growth of particles in the plasma reactor by the discrete-sectional model and the Gaussian charge distribution function. The particle size distribution becomes bimodal in the plasma reactor and most of the large particles are charged negatively, but some fractions of small particles are in a neutral state or even charged positively. As the particles accumulate in the plasma reactor, the amount of electrons absorbed onto the particles increases, while the electron concentration in the plasma decreases. As the mass generation rate of small particles (monomers) decreases or as the initial electron concentration increases, the electron concentration in the plasmas increases and the particle charge distribution is shifted in the negative direction and the fraction of particles charged negatively and the average number of electrons per particle increase. With the decrease in monomer diameter, the electron concentration decreases in the beginning of plasma discharge, but, later, increases. For high mass generation rate of monomers or for low initial electron concentration or for small monomer diameter, the fraction of particles in a neutral state increases and the particle size distribution becomes broader.     

The use of N-sulfenylimines in the β-lactam synthon method: Staudinger reaction, oxidation of the cycloadducts and ring opening of β-lactams

Selected N-sulfenylimines act as good nucleophilic partners in the Staudinger reaction with methoxy- and benzyloxy-ketenes. The choice of diisopropylethylamine as a non-nucleophilic Lewis base for the generation of ketenes from acid chlorides is a determining factor for the success of the reaction. N-Sulfenyl-β-lactams are obtained in good to excellent yields and with moderate cis/trans diastereoselectivity. Then, they are quantitatively and selectively transformed to N-sulfinyl- or N-sulfonyl-β-lactams, by adjusting the oxidation state of the sulfur atom. The oxidation process induces an inversion of polarity of the nitrogen atom's substituent and allows a subsequent smooth ring opening by reaction of N-thiolated-β-lactams with various nucleophiles. The overall sequence provides straightforward and efficient route to highly functionalized-β-amino acid derivatives.     

An efficient synthesis of (+)-prelactone B

An enantioselective synthesis of (+)-prelactone B 1 has been achieved on a multigram scale starting from a known bicyclic precursor 2. The key feature of the strategy is the generation of 3-stereogenic centres from a single bicyclic precursor, which has been utilized as a chiral building block for the synthesis of various natural products.     

New regio-selective method of combinatorial synthesis of substituted thiophenes,thieno[3,2-b]pyridines and other heterocycles via combination of ‘domino’-type reactions

We present a novel combinatorial multicomponent regio-selective approach towards the synthesis of thieno[3,2-b]pyridines and pyridine pyrans. The methodology is based on the ‘domino’-type reaction. The high regio-selectivity in this reaction is gained by the in situ generation of the mono-potassium salt of 2-cyano-1-mercaptoethenethiolate. We also demonstrate that the use of ethyl 2-cyanoacetate in this reaction as a CH-acid leads to the termination of the domino sequence at the Dieckmann condensation step and yields novel ethyl 3-(4-cyano-3-hydroxy-5-(alkylthio)thiophen-2-yl)-3-oxopropanoate.     

Novel protocol for the generation of β-branched Baylis-Hillman adducts from ethyl sorbate and aryl aldehydes

A novel protocol for the generation of β-branched Baylis-Hillman adducts in moderate yields (52-68%) as E/Z mixtures from commercially available dienoates such as ethyl sorbate and aryl aldehydes catalyzed by DABCO in DMSO is reported.     

Headspace sampling with in situ carbodiimide-mediated derivatization for the determination of ibuprofen in water samples

A method using headspace generation and in situ derivatization with water soluble EDC (1-[3-(dimethylamino)propyl]-3-ethylcarbodiimide) and TFEA (2,2,2-trifluoroethylamine) has been optimized for the determination of ibuprofen (2-(p-isobutylphenyl)propionic acid), one of the most common non-steroid anti-inflammatory drug (NSAIDs) residues in surface and wastewater samples. Derivatization was carried out in the vial of the headspace sampler (HS) in only 15 min, after which instrumental measurements were made with gas chromatography-mass spectrometry (GC-MS). As the injection system, a programmed temperature vaporizer (PTV) in the solvent-vent injection mode is proposed in order to increase the sensitivity of the measurements. The effects of the variables affecting HS generation, the derivatization reaction, and the instrumental PTV conditions were studied. A limit of quantification as low as 32 ng/L was achieved, and repeatability values were below 10%. Accuracy of the method was evaluated using spiked ultrapure water at three concentration levels, obtaining apparent recoveries between 96% and 104%. The proposed method was applied to the quantification of ibuprofen in sea water and urban wastewater samples.     

荧光猝灭研究芳醚树枝形聚合物构象

本工作分别合成了外围修饰一个芘基团和核心修饰一个芘基团两个系列的芳醚树枝形聚合物Py-Gn-OH和Gn-CH₂-Py(n=1~4)。Py-Gn-OH和Gn-CH₂-Py的发光随代数增加而增强,荧光寿命增加。荧光猝灭实验结果表明,树枝形聚合物Py-Gn-OH和Gn-CH₂-Py的双分子猝灭速率常数均随代数增加而减小,表明树枝形聚合物发生了构象折叠,位于核心和外围的芘基团均被树枝形聚合物骨架包裹,随代数增加树枝形聚合物骨架增大,对芘基团包裹作用增强,导致猝灭剂接近芘基团的位阻增大。Gn-CH₂-Py体系的双分子猝灭速率常数均比相应代数Py-Gn-OH体系略小,说明树枝形聚合物骨架对连接在核心的芘基团的包裹程度比对连接在外围的芘基团略强。本工作为新型功能芳醚树枝形聚合物设计和应用提供了参考。