等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

Relationship between Chemical Characteristics and Sensory Evaluation of Koikuchi Soy Sauce

Understanding the effect of chemical characteristics on sensory evaluation elucidates the classification of soy sauce quality. In this work, 16 koikuchi soy sauces (the major form of Japanese soy sauce) from the Akita Prefectural Miso and Soy Sauce Products Committee were comprehensively studied. The results suggested that good quality soy sauce should possess a color with relatively high +a* and +b* values. Moreover, the ratio between the +L* value and +C* value had a negative influence on the external appearance. Furthermore, the soluble salt-free solids content of high-ranking soy sauce was much higher than that of low-ranking soy sauce, especially in the top three ranked soy sauces (at greater than 40%). The salt content not only negatively affect the soy sauce taste, but also played an essential role in improving the soy sauce flavor. Further study of the amino acid content showed that the glutamic acid content in high-ranking soy sauces was significantly lower than that in low-ranking soy sauces. In particular, the interaction between proline and glucose was also observed to improve soy sauce aroma. Finally, the principal component analysis was performed to reconfirm the main attributes for the sensory classification.     

酿造酱油、配制酱油及酿造食醋、配制食醋的鉴别

乙酰丙酸是配制酱油的特有成分，在硫酸溶液中，乙酰丙酸可与香草醛反应而呈现蓝绿色。掺有尿素的酱油在与丁二酮肟、磷酸混合后，加热煮沸会呈现红色。用酱色、食盐等配制的劣质酱油可用测定氨基酸态氮和酱色含量的方法进行鉴别。酿造食醋和配制食醋的常用鉴别方法是碘液法和高锰酸钾法。     

液液萃取-场放大进样-毛细管电泳非接触式电导分离检测酱油中的安赛蜜

采用场放大进样(FASI)-毛细管电泳非接触式电导检测法(CE-C⁴D),结合液液萃取(LLE)的样品净化预处理技术,分离检测了酱油中人工合成甜味剂安赛蜜。酱油样品经酸化后,用乙酸乙酯作为萃取剂,成功地消除了酱油中含有的大量无机盐等复杂基体对微量安赛蜜的干扰。实验对影响LLE萃取效率和FASI-CE-C⁴D分离检测的关键因素进行了讨论,特别是对样品净化前处理过程中萃取剂及用量、样品酸化pH值、萃取时间、萃取温度等条件进行了优化。结果表明,酱油中的安赛蜜可获得良好分离和灵敏检测,检出限和定量限分别为0.15 mg/kg和0.48 mg/kg。对市售酱油样品进行安赛蜜的加标回收测定,得到加标回收率为92.3%～108.1%,相对标准偏差<8.0%。该法具有简单快速、灵敏高效、分析成本低的优点,能满足酱油中安赛蜜的分析检测要求。     

Method development and validation for the determination of biogenic amines in soy sauce using supercritical fluid chromatography coupled with single quadrupole mass spectrometry

Biogenic amines have been reported in many foods such as fish, meat, and soy sauce. The consumption of foods containing high concentrations of biogenic amines has been associated with health hazards. In this study, a green and efficient method using supercritical fluid chromatography coupled with single quadrupole mass spectrometry was developed for determination of biogenic amines in soy sauce. The chromatographic and mass spectrometry conditions were systematically optimized in terms of selectivity and peak shape. Nine biogenic amines were well separated within 25 min on a Cosmosil 5HP column using 5% (v/v) water and 0.2% (v/v) ammonia solution in methanol as mobile phase additives at a backpressure of 120 bar and temperature of 40°C. The established method was fully validated regarding the linearity, sensitivity, precision, and accuracy. The limits of detection and limits of quantification ranged from 0.03 to 10.50 μg/mL and 0.10 to 23.1 μg/mL, respectively. The relative standard deviations for intra‐ and interday precisions were all lower than 9.36% and the recoveries ranged from 75.82 to 99.63% and 80.10 to 99.89% for two levels of standards spiked in soy sauce, respectively. Finally, the established method was successfully applied to the quantitative analysis of biogenic amines in soy sauce.     

微波消解凯氏定氮法快速测定酱油中全氮

研究了凯氏定氮法测定酱油中全氮时样品的微波消解方法,进行了微波消解条件的选择及消解结果精密度试验,并与国家标准方法对比,验证了方法的准确度。试验结果表明,消解完全仪需20min,相对标准偏差均小于2%（n=7）,回收率范围为96%～103%,经t检验,微波溶样法与国家标准凯氏定氮法的测定结果无显著性差异。     

分散固相萃取结合气相色谱-高分辨质谱快速筛查酱油中多种氯丙醇

建立了酱油中1，3-二氯-2-丙醇、2，3-二氯-1-丙醇、3-氯-1，2-丙二醇和2-氯-1，3-丙二醇的分散固相萃取-气相色谱-高分辨质谱快速筛查检测方法。样品采用乙酸乙酯提取，提取液浓缩后经N-丙基乙二胺净化，气相色谱-高分辨质谱测定，内标法定量。结果表明，该方法对于酱油中4种氯丙醇的定量限为0.5~10 μg/kg。在3个浓度水平下的加标回收率为78%~103%；相对标准偏差均不大于8.8%。该方法快速、简便、准确、灵敏，可作为酱油中4种氯丙醇的有效检测方法。     

离子色谱-积分脉冲安培检测法同时测定酱油中20种氨基酸和6种糖

建立了梯度淋洗-离子色谱-积分脉冲安培检测法同时测定酱油中20种氨基酸和6种糖的方法，通过对色谱柱温度、pH值、放置时间等实验影响因素的考察，探索出了适合26种组分测定的多级梯度淋洗条件。结果表明，当流速为0.25 mL/min，pH值在5.2~6.7，柱温在35℃时，26种组分在各自的浓度范围内具有良好的线性关系（r² ≥ 0.995）。除了谷氨酰胺、亮氨酸、异亮氨酸、蛋氨酸外，其他22种组分的检出限均小于0.03 mg/L；在0.20、0.50、2.00 mg/L 3个添加水平下，回收率为84.2%~109%，RSD为2.7%~7.8%。该方法高效、简便、灵敏、准确，可用于酱油中多种氨基酸和糖的同时测定以及掺假辨别技术研究。     

Modeling of the permeate flux decline during MF and UF cross-flow filtration of soy sauce lees

Cross-flow ultrafiltration and microfiltration have been used to recover refined soy sauce from soy sauce lees for over 25 years. The precise mechanism which dominated the permeate flux during batch cross-flow filtration has not been clarified. In the present study, we proposed a modified analytical method incorporated with the concept of deadend filtration to determine the initial flux of cross-flow filtration and carried out the permeate recycle and batch cross-flow filtration experiments using soy sauce lees. We used UF and MF flat membrane (0.006 m² polysulfone) module under different transmembrane pressures (TMP) and cross-flow velocities. The modified analysis provided an accurate prediction of permeate flux during the filtration of soy sauce lees, because this model can consider the change in J₀ at initial stage of filtration which was caused by the pore constriction and plugging inside membrane, and these changes may not proceed when the cake was formed on the membrane surface. Mean specific resistance of the cake increased with TMP due to the compaction of the cake and decreased with cross-flow velocity due to the change of deposited particle size, but less depended on the membrane in the present study. These results indicate that the value of J₀ determined by modified method was relevant to exclude the effects of the initial membrane fouling by pore constriction due to protein adsorption and plugging with small particles. The modified analytical method for the cake filtration developed in the present study was considered to be capable of selecting an appropriate operating conditions for many cross-flow filtration systems with UF, MF membranes.     

顶空固相微萃取-气相色谱-质谱法快速测定酱油中的挥发性风味成分

建立了一种快速简便地测定酱油中挥发性风味成分的顶空固相微萃取（HS-SPME）-气相色谱-质谱法(GC-MS)。以2-辛醇为内标,考察了萃取头、萃取时间、离子强度、萃取温度对酱油样品中挥发性风味物质萃取的影响。该方法对酱油中常见挥发性风味成分的测定有良好的重复性和回收率,对常见挥发性物质的定量比较准确。优化的HS-SPME条件为：涂层厚度为85 μm聚丙烯酸酯(PA)萃取纤维头,于45 ℃、NaCl质量浓度为250 g/L下对酱油样品顶空吸附40 min,于250 ℃下解吸2 min后进行GC-MS分离鉴定。酱油样品的分析结果表明,其挥发性风味物质中含量较高的是醇、酸、酯和酚类,此外还有一些羰基化合物和杂环化合物。     

Simultaneous analysis of 2‐methylimidazole, 4‐methylimidazole,and 5‐hydroxymethylfurfural potentially formed in fermented soy sauce by “quick,easy, cheap,effective, rugged,and safe” purification and UHPLC with tandem mass spectrometry

2‐Methylimidazole, 4‐methylimidazole and 5‐hydroxymethylfurfural are harmful by‐products potentially formed via Maillard reaction in fermented soy sauce. The present study proposed a new method based on “quick, easy, cheap, effective, rugged, and safe” purification and ultra high performance liquid chromatography with tandem mass spectrometry for the simultaneous analysis of 2‐methylimidazole, 4‐methylimidazole and 5‐hydroxymethylfurfural in fermented soy sauce. The sample was dissolved in water after addition of internal standard 4‐methylimidazole‐d₆ and extracted with acetonitrile. After dehydration, it was centrifuged and the supernatant was subsequently purified using two sorbents namely primary‐secondary amine and multi‐walled carbon nanotube. Three target analytes were separated by gradient elution and determined under multiple reactions monitoring mode. The limit of detection, matrix effect, recovery and precision of the developed method were investigated. Results found that three target analytes displayed excellent linearity in concentration range of 1–250 μg/L. Limit of detection was in the range of 0.3–1 μg/kg for three target analytes. The mean recoveries for fermented soy sauce samples at three spiked concentrations were in the range of 91.2–112.5%, and the intra‐ and interday precision were in the ranges of 3.6–9.2 and 7.1–10.8%, respectively. This validated method was successfully applied to determine 2‐methylimidazole, 4‐methylimidazole and 5‐hydroxymethylfurfural concentrations in fermented soy sauce.