等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Core-shell lipid-polymer nanoparticles as a promising ocular drug delivery system to treat glaucoma

Nowadays,tremendous researches have been focused on the core-shell lipid-polymer nanoparticles(LPNs) due to the advantages of both liposomes and polymer nanoparticles.In this work,LPNs were applied to encapsulate brinzolamide(Brz-LPNs) for achieving sustained drug release,improving drug corneal permeation and enhancing drug topical therapeutic effect.The structure of Brz-LPNs was composed of poly(lactic-co-glycolic) acid(PLGA) nanocore which encapsulated Brz(Brz-NPs) and lipid shell around the core.Brz-LPNs were prepared by a modified thin-film dispersion method.With the parameters optimization of Brz-LPNs,optimal Brz-LPNs showed an average particle size of151.23±1.64 nm with a high encapsulation efficiency(EE) of 86.7%±2.28%.The core-shell structure of Brz-LPNs were confirmed by transmission electronic microscopy(TEM).Fourier transformed infrared spectra(FTIR) analysis proved that Brz was successfully entrapped into Brz-LPNs.Brz-LPNs exhibited obvious sustained release of Brz,compared with AZOPT^■ and Brz-LPs.Furthermore,the corneal accumulative permeability of Brz-LPNs significantly increased compared to the commercial available formulation(AZOPT^■) in vitro.Moreover,Brz-LPNs(1 mg/mL Brz) showed a more sustained and effective intraocular pressure(IOP) reduction than Brz-LPs(1 mg/mL) and AZOPT^■(10 mg/mL Brz) in vivo.In conclusion,Brz-LPNs,as promising ocular drug delivery systems,are well worth developing in the future for glaucoma treatment.     

从能源产业发展和人才需求浅谈“能源化学”新工科改造

Based on building emerging engineering education of "energy chemistry", we investigated the state key petro-chemical enterprises according to the industrial development and the demand of professional talents. The research report summarizes, analyzes and discusses the current priority development fields of industry, the talent training status, curriculum structure and education program of the chemistry and chemical engineering in universities. The ideas on emerging engineering education of "energy chemistry" have been proposed, and it will be beneficial to building a novel education program for talents training, which integrates the principle of chemistry, energy conversion and information science, etc.     

哈工大材料与化工(化学工程领域)专业硕士研究生培养的探索与实践

The status and main problems in the cultivation of master degree graduate training in materials and chemical engineering (chemical engineering field) of Harbin Institute of Technology were analyzed by applying the concept of engineering education paradigm. Combined with the professional directions of chemical engineering discipline in HIT, i.e. "one field" (new chemical material field) and "two industries" (electrochemical engineering and polymer material engineering), the revision of training program, the course constructions and the measures for engineering practice ability and innovation ability training were explored and practiced with the purpose of the cultivation of industry leaders and high-level talents in chemical engineering filed.     

“双一流”背景下高等农业院校有机化学基础课程教学新模式的构建及实践

The crop science of Sichuan Agricultural University is an authorized first-class discipline. As the strategic supporting department for innovative talent cultivation in agriculture and forestry major, we are facing a long-term challenge in reforming the teaching mode for basic course-organic chemistry and cultivating talented students with solid basic knowledge and strong sense of innovation. Herein a thorough survey was performing to establish the executable teaching programs for this course during the "Double-First Class Universities Plan" period. A multidimensional teaching resource library for organic chemistry course was also constructed. The new classroom teaching mode "Interest cultivation-Creative thought development-Autonomous and Cooperative learning", along with a stepwise practice teaching mode "Foundation skills-Integrated application-Innovative trial" was proposed and practiced among thirty-five majors including agriculture, forestry and veterinary, to improve the quality for innovative talent cultivation and support our first-class discipline construction. This research could probably serve as a reference for congeneric agricultural university.     

新工科背景下应用化学专业人才培养模式创新研究与实践——以青岛农业大学应用化学专业为例

In the light of the new requirements of emerging engineering education for talent cultivation, this paper firstly analyzes the difficulties and deficiencies in the construction of applied chemistry major in Qingdao Agricultural University. This paper also introduces the practice in adapting to the regional economy and society development and the needs of students' growth, innovating the talent training mode, optimizing the talent training program, reconstructing the curriculum system, and strongly promoting the education and teaching reform based on the project. A new idea is provided for constructing the application-oriented talent training mode of industry-university-research for local agricultural colleges and universities in the background of the emerging engineering education.     

中国政治学40年：议题设置与政治发展

1979年邓小平同志提出“补课说”以来,政治学作为一门独立的学科得以恢复。在40年的发展中,中国政治学在院系建设、人才培养、成果译介、本土研究、国际交流合作和学术共同体培育等方面取得了长足进步。中国政治学发展与改革开放的进程相辅相成,改革实践为政治学研究提供了重大的课题,政治学的研究成果也助力改革攻坚克难向前推进。随着新时代的到来,一种以全组织和强技术为载体的新国家形态浮现出来,必将成为政治学研究的首要问题。     

新工科背景下应用型院校化工类工程教育体系探索*——以北京理工大学珠海学院为例

以北京理工大学珠海学院为例,围绕新工科背景下应用型地方院校化工类工科教育体系改革思路及措施进行阐述,分别从培养目标确立及教学管理体系改革、教学过程质量控制、课程体系结构改革、人才培育模式改革等4个方面展开分析,构建适用于新工科背景下应用型地方院校的工科培养体系。重点叙述了完全学分制教学管理模式、IEET认证对教学质量提升的保障及应用型特色人才教学模式的构建,并给出具体的改革举措,希望为同类型高校提供借鉴。     

基于化学的新工科专业——“智慧分子工程”专业建设思路及建议

According to the construction concept of the "emerging engineering education", ideas and the connotations for constructing "intelligent molecular engineering" are introduced. The necessities of setting up of "intelligent molecular engineering" are discussed and the cultivation demand of professional talents is analyzed. The construction draft of "intelligent molecular engineering" is also expounded, including the cultivation targets and requirements of graduation, the teaching content of curriculum system, teaching staff and teaching conditions. All the statements are significant for guiding the design and construction of "intelligent molecular engineering".     

应用化学"113"人才培养体系的探索

In order to bridge the gap between the supply and the demand of talent cultivation, the existing talent cultivation system of applied chemistry specialty is reformed and a new "113" talent cultivation system is guided by Outcome-Based Education (OBE) education. The advanced engineering education mode is adopted to provide students with an engineering education based on the background environment of the conceptual-design-implementation-operation (CDIO) process. The characteristic "three modernizations" education mechanism, namely, cooperative education, family training and personalized guidance, are implemented. By building a new system of "113" talents training, an engineering talent training environment is formed, which takes the family as a unit, the enterprise as the background, and the project as the carrier. The problem of separating the supply from the demand of talents training for applied chemistry specialty will be fundamentally solved.     

构建虚实结合、线上线下的制药工程专业实验项目——以湖北大学制药工程专业实验改革为例

To effectively solve the problem of insufficient engineering ability in the experimental teaching of pharmaceutical engineering major, the engineering integrated experimental device was designed and developed based on the idea of "one main body and two wings". On the basis of this device, the "virtual and real combination, online and offline" laboratory teaching project of production simulation and unit operation engineering simulation for anti-cough drug levodropropizine was implemented. It is expected to enhance students' engineering awareness and enhance the engineering ability to meet the new requirements of the "new engineering discipline" for professional laboratory teaching.     

“Polymer Materials Science and Engineering”在线课程建设体会

全英文课程建设是拓展国际化办学领域的一个新举措,是提高留学生质量的一个重要方面。高分子材料科学与工程专业课程内容涉及面广,包括高分子化学、高分子物理、聚合物制备工程、聚合物加工工程、材料研究方法、模具设计等多方面的知识。"Polymer Materials Science and Engineering"在线课程,将上述内容中的共性问题进行提升凝练,综合了高分子物理、高分子化学、聚合物加工等核心专业课程的精华,面向硕士研究生和留学生开设,特别是针对国际学生的公共选修课程进行建设,采用全英文授课,对核心内容进行了弹性设计。本文介绍了"Polymer Materials Science and Engineering"在线课程建设过程中的体会以及课程特点、实施过程、教学效果及经验体会。