等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

化学电源制造工程研究生校内实践课程创新性教学探索

如何培养专业硕士的实践和创新能力是高等教育工作者不断探索的问题。本文以哈尔滨工业大学化学电源制造工程实践课程为例,针对该课程存在的问题,从教学手段、教学内容、教师队伍和评价体系四个方面进行课程改革。构建了研究生课内外全方位自主学习的教学体系,对有效利用实践课程提升学生的工程实践、创新及科研能力进行有益的探索。     

化学类应用型专业课“案例贯穿授课过程”教学模式探索

在应用型专业课应用无机化学课程的教学过程中,探索通过一个案例贯穿整个授课过程的CC教学模式,有针对性地培养学生理论联系实际的能力,挖掘将专业知识应用于科学研究的创新潜质。该模式可对专业人才的培养起到积极的作用,并对探索新型的专业课授课模式、提高专业课教学效果具有借鉴意义。     

基于化学的“化学测量学与技术”新工科专业建设建议

The background of the establishment of "chemistry metrology and technology" as an emerging engineering education major based on chemistry is analyzed. Based on the national development strategy, aiming at the urgent demand of interdisciplinary talents for the rapid development of chemistry metrology and technology, the necessity of setting up the major of "chemistry metrology and technology" based on chemistry is demonstrated. Based on the investigation of professional talents in instrument development enterprises and application fields, some suggestions on the program of "chemistry metrology and technology" major including orientation, objectives, graduation requirements and professional training are provided. Some requirements of the curriculum, teaching staff and teaching conditions are put forward.     

药学专业无机化学“课程思政”教学初探

课程思政教学理念有利于发挥高校"立德树人"的根本任务与教师"教书育人"的首要职责。本文通过多个视角梳理无机化学课程所蕴含的思政教育元素,将之融入课堂教学,以实现专业知识教育与思政教育的有机统一。     

基于化学的新工科专业——“智慧分子工程”专业建设思路及建议

According to the construction concept of the "emerging engineering education", ideas and the connotations for constructing "intelligent molecular engineering" are introduced. The necessities of setting up of "intelligent molecular engineering" are discussed and the cultivation demand of professional talents is analyzed. The construction draft of "intelligent molecular engineering" is also expounded, including the cultivation targets and requirements of graduation, the teaching content of curriculum system, teaching staff and teaching conditions. All the statements are significant for guiding the design and construction of "intelligent molecular engineering".     

在《高分子化学》课程中开展互动式教学的实践与探索

通过在"高分子化学"课程中开展师生互动式教学,探讨了运用互联网网站、网上论坛和学生上讲台作学术报告等方式对提高学生学习积极性、促进专业课程教学改革、提高教学质量的作用.介绍了所采用的具体做法,并就互动式教学的开展总结了个人的体会.     

构建“三育”实验教学体系培养民族地区创新性应用型人才

This paper introduced the exploration on the new measures of cultivating innovative and applied talents in minority areas as part of the project in construction of the national demonstration center for experimental chemistry education. Focusing on developing students' experimental skills and innovation abilities, the reform refined the "Three Education" laboratory teaching philosophy of the laboratory culture education, the professional skills education and the innovation ability education, constructed "Three Education" laboratory teaching system, and established the operating mechanism of laboratory teaching of "Four Focuses" and "Five Synergies". For how to play the role of laboratory teaching in the effective cultivation of innovative and applied talents, this article provides a useful exploration and effective practical experience.     

浅谈理论与实际相结合的原则在分析化学教学中的运用

理论与实际相结合是教学工作中必须坚持的一项基本原则,在分析化学教学中,结合学生的专业特点对教学内容进行合理的规划,将教学内容与日常生活、生产实践、新闻事件及学科发展相结合,努力激发学生的学习兴趣,增强教学内容的实用性、时代感和历史感,让学生在掌握分析化学基础知识、基本理论的同时,提高分析、解决问题的能力,也为提高科学素养和创新能力打下良好的基础。     

非化学专业无机及分析化学“讲练考”教学模式改革

This article discussed "teaching-practice-test" teaching mode with teaching practical experience and content matching.Results showed that this mode highlighted the proportion of practice and problem-solving in the process of learning; improved students' ability to solve problems using professional and disciplinary knowledge; changed learning styles from cramming way to autonomous learning step by step and trained students' creativity.     

“化学在抗击新冠肺炎疫情中扮演的重要角色”专题教学

Considering COVID-19 epidemic prevention and control, education materials were excavated and refined, such as chemical disinfectants, typical drugs used in clinical treatment or trial and materials for preparation of medical protective equipment. We have carried out thematic teaching on "The important role of chemistry in the fight against COVID-19 epidemic", and integrated ideological and political education into the thematic teaching. Through thematic teaching, we can make students feel the charm of chemistry subject, stimulate students' interest in learning chemistry, fully mobilize students' learning enthusiasm and initiative, strengthen students' confidence and courage to overcome difficulties, cultivate the students' professional disciplines literacy and scientific literacy, activate students' love for the motherland, the people and the Communist Party of China.