A chlorinated non-fullerene acceptor for efficient polymer solar cells

Improving the performance and reducing the manufacturing costs are the main directions for the development of organic solar cells in the future. Here, the strategy that uses chemical structure modification to optimize the photoelectric properties is reported. A new narrow bandgap (1.30 eV) chlorinated non-fullerene electron acceptor (Y15), based on benzo[d][1,2,3] triazole with two 3-undecyl-thieno[2′,3′:4,5] thieno[3,2-b] pyrrole fused -7-heterocyclic ring, with absorption edge extending to the near-infrared (NIR) region, namely A-DA'D-A type structure, is designed and synthesized. Its electrochemical and optoelectronic properties are systematically investigated. Benefitting from its NIR light harvesting, the fabricated photovoltaic devices based on Y15 deliver a high power conversion efficiency (PCE) of 14.13%, when blending with a wide bandgap polymer donor PM6. Our results show that the A-DA'D-A type molecular design and application of near-infrared electron acceptors have the potential to further improve the PCE of polymer solar cells (PSCs).     

含萘并二噻吩小分子受体材料的带隙调控及其在非富勒烯太阳能电池中的应用

By using photovoltaic technology, ambient solar light can be directly converted to electricity. The photovoltaic technology has been regarded as one of the most important and promising strategies to resolve the worldwide energy and pollution problems. As one type of photovoltaic technology, polymer solar cells have attracted increasing interest due to their advantages of solution processing capability, low-cost, feasibility to be fabricated on flexible substrates etc. Not until a few years ago, the fullerene derivatives had been dominated the organic photovoltaic field as the most promising acceptor materials for polymer solar cells. However, fullerene-based polymer solar cells have a power conversion efficiency bottleneck due to the relatively fixed energy levels as well as the fixed bandgaps of fullerene derivatives. Therefore, researchers started to develop nonfullerene acceptors which can be used as alternatives to replace the traditional fullerene derivatives. Compared to the fullerene derivatives, nonfullerene acceptors offer several advantages such as stronger light absorption, tunable bandgaps and frontier molecular orbital energy levels. For nonfullerene acceptors, a ladder-type fused ring is usually used as the central core which is an essential building block to tailor the bandgaps and energy levels. Although many fused ring systems have been explored for efficient nonfullerene acceptors, ladder-type angular-shape dithienonaphthalene is seldom reported as the donor unit for nonfullerene acceptors. Furthermore, the impact of thiophene bridge on the optical and photovoltaic properties of the dithienonaphthalene-based nonfullerene acceptors has never been reported. In this context, we report on the design and synthesis of a dithienonaphthalene-based small-molecule acceptor which contains thiophene bridges in between the acceptor terminals and the fused-ring donor core. Compared to the dithienonaphthalene-based small-molecule without the thiophene bridges, the resulting acceptor (DTNIT) exhibits a reduced bandgap of 1.52 eV which makes it more suitable to be blended with the benchmark large bandgap copolymer, poly[(2, 6-(4, 8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1, 2-b: 4, 5-b']dithiophene))-alt-(5, 5-(1', 3'-di-2-thienyl-5', 7'-bis(2-ethylhexyl)benzo[1', 2'-c:4', 5'-c']dithiophene-4, 8-dione)] (PBDB-T). The reduced band-gap of the resulting nonfullerene acceptor can be attributed to its extended π-conjugation in comparison with the dithienonaphthalene-based acceptor without the thiophene bridges. Inverted polymer solar cells with a device configuration of indium tin oxide/ZnO/PBDB-T:DTNIT/MoO₃/Ag were fabricated and characterized. Polymer solar cells based on PBDB-T:DTNIT showed an open circuit voltage of 0.91 V, an enhanced short circuit current of 14.42 mA∙cm⁻², and a moderate PCE of 7.05% which is comparable to the PCE of 7.12% for the inverted device based on PBDB-T:PC₇₁BM. Our results not only provide a method to synthesize efficient nonfullerene acceptors with reduced bandgaps, but also offer a bandgap modulation strategy for nonfullerene acceptors.     

Synthesis of D-A copolymers based on thiadiazole and thiazolothiazole acceptor units and their applications in ternary polymer solar cells

We have designed and synthesized two wide bandgap new donor-acceptor (D-A) copolymers consisting of the same alkylthiazole-substituted benzo[1,2-b;4,5-b′]dithiophene (BDTTz) donor unit and but different acceptor units, i.e., thiazolo[5,4-d]thiazole (TT_Z) ( P122 ) and 1,3,-4 thiadiazole (TDz) ( P123 ) and investigated their optical and electrochemical properties. We have employed these copolymers as donor and fullerene (PC ₇₁ BM) and narrow bandgap non-fullerene (Y6) as acceptor, to fabricate binary and ternary bulk heterojunction polymer solar cells (PSCs). The overall power conversion efficiency (PCE) of optimized binary bulk heterojunction PSCs based on P122 :Y6 and P123 :Y6 is 12.60% and 13.16%, respectively. The higher PCE for PSCs based on P123 than P122 counterparts may be associated with the broader absorption profile of the P123 and more charge carrier mobilities than that for the P122 active layer. With the incorporation of small amount of PC₇₁BM into either P122 :Y6 or P123 :Y6 binary blend, the corresponding ternary PSCs showed an overall PCE of 14.89% and 15.52%, respectively, which is higher than the binary counterparts using either Y6 or PC₇₁BM as acceptor. Incorporating the PC₇₁BM in the binary host blend increases the absorption in the 300–500 nm wavelength region, generating more excitons in the active ternary layer and helping to dissociate the excitons into free charge carriers more effectively. The more appropriate nanoscale phase separation in the active ternary layer than the binary counterpart may be one of the reasons for higher PCE.     

聚3-己基噻吩：非富勒烯太阳能电池中的量子效率损失和电压损失

聚3-己基噻吩(P3HT)以其合成工艺简单、成本低廉的优势,成为有机光伏领域中最具吸引力的电子给体材料之一。然而,目前P3HT: 非富勒烯太阳能电池的光伏性能仍然较差。在本工作中,我们证明了与P3HT: 富勒烯太阳能电池相比,较快的电荷转移态的非辐射衰减速率(K_nr)是导致P3HT: 非富勒烯太阳能电池中较低的量子效率和较高的电压损失的原因。然后,我们研究了基于非富勒烯受体ZY-4Cl的太阳能电池的工作机理。研究结果表明与P3HT: 非富勒烯体系相比,P3HT: ZY-4Cl中K_nr的降低改善了器件的量子效率,同时降低了电压损失。K_nr降低的原因可以部分归因于电荷转移态能量的增加。此外,给体分子和受体分子之间的距离(DA间距)的增大也是K_nr减少的重要原因。因此,我们得出结论：为了提高P3HT太阳能电池的性能,需进一步降低器件的K_nr,这可通过增加活性层中的DA间距来实现。     

Ternary solvent-processed efficient organic solar cells based on a new A-DA'D-A acceptor derivative employing the 3rd-position branching side chains on pyrroles

Recent advances in non-fullerene acceptors(NFAs),typically Y6,have driven power conversion efficiency(PCE) of single-junction orga nic solar cells(OSCs) over 16%.Mea nwhile,it becomes essential to know how to adopt simple strategies to further improve device performance.In this work,a new A-DA'D-A acceptor derivative,Y19-N3 employing 3-ethylheptyl branched at the 3^rd-position instead of 2-ethylhexyl on the pyrroles of Y19 is reported.The selection of an appropriate solvent in casting device is implemented to maximize the photovoltaic performance.PBDB-T:Y19-N3-based OSCs treated with a ternary solvent of CF/CB(1:3,v/v) and 0.8% DIO exhibit the optimal PCE of 13.77% here,with the significantly improved V_oc(0.78 V) and FF(0.72) as well as the high J_sc(24.46 mA/cm²).Further characterizations indicate that this ternary solvent-treated PBDB-T/Y19-N3 film exhibits the more appropriate morphological features with the highly efficient charge generation and collection as well as the more balanced electron and hole mobilities.This work combines molecular design and device engineering to improve the photovoltaic properties,which is important to the development of OSCs.     

Rigid Nonfullerene Acceptors Based on Triptycene–Perylene Dye for Organic Solar Cells

Three kinds of nonconjugated rigid perylene bisimide (PBI) derivatives based on a triptycene core were designed, synthesized and characterized. The unique three‐dimensional (3D) conformation of triptycene could enable formation of polymer with the favorable morphology for organic polymer solar cells (PSCs) by relieving the self‐aggregation of rigid PBI units. The low‐lying LUMO energy levels of these compounds demonstrated that they are very suitable for use as acceptors in organic solar cells. A higher power conversion efficiency (PCE) of 6.15 % was obtained for the blend film using the compound with two PBI units ( T‐2 ) as the acceptor and commercial poly[[4,8‐bis[5‐(2‐ethylhexyl)thiophene‐2‐yl]benzo[1,2‐b :4,5‐b ′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)‐carbonyl]thieno[3,4‐b ]thiophenediyl]] (PCE‐10) as the electron donor.     

Thiadiazoloquinoxaline and benzodithiophene bearing polymers for electrochromic and organic photovoltaic applications

Abstract

Two novel thiadiazoloquinoxaline and benzodithiophene (BDT) bearing copolymers were designed and synthesized. Different BDT units (alkoxy and thiophene substituted) were used as donor materials and the effect of alkoxy and thiophene substitution on the electrochemical, spectroelectrochemical and photovoltaic properties were investigated. Both polymers exhibited low oxidation potentials at around 0.90 V and low optical band gaps at around 1.00?eV due to the insertion of electron poor thiadiazoloquinoxaline unit into the polymer backbone. Both P1 (poly-6,7-bis(3,4-bis(decyloxy)phenyl)-4-(4,8-bis(nonan-3-yloxy)benzo[1,2-b:4,5-b']dithiophen-2-yl)-[1, 2, 5]thiadiazolo[3,4-g]quinoxaline) and P2 (poly- 4-(4,8-bis(5-(nonan-3-yl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophen-2-yl)-6,7-bis(3,4-bis(decyloxy)phenyl)-[1, 2, 5]thiadiazolo[3,4-g]quinoxaline) exhibited multichromic behavior with different tones of greenish yellow and gray in the neutral and fully oxidized states, respectively. In addition, both polymers revealed very high optical contrasts (～87%) in the NIR region which make these promising polymers good candidates for NIR applications. Finally, in order to explore the organic photovoltaic performances, P1 and P2 were mixed with PC₇₁BM in the active layer of organic solar cells (OSCs) by conventional device structure. As a result P1 and P2 based devices revealed power conversion efficiencies (PCEs) of 0.33% and 0.60% respectively. However, the additive treatment enhanced PCE from 0.49 to 0.73% for P2 based devices.     

Photovoltaic polymers based on difluoroqinoxaline units with deep HOMO levels

We report the synthesis of low bandgap polymers with a difluoroquinoxaline unit by Stille polymerization for use in polymer solar cells (PSCs). A new series of copolymers with 2,3‐didodecyl‐6,7‐difluoro quinoxaline as the electron‐deficient unit and alkyloxybenzo[1,2‐b:4,5‐b′]dithiophene and thiophene as the electron‐rich unit were synthesized. The photovoltaic properties of the devices based on the synthesized polymers revealed that the fluorine atoms at the quinoxaline units aid in decreasing the highest occupied molecular orbital (HOMO) energy levels; this in turn increased the open circuit voltage of the devices. The polymers with long alkyl chains exhibited good solubility that increased their molecular weight, but the power conversion efficiency was low. Efficient polymer solar cells were fabricated by blending the synthesized copolymers with PC₇₁BM, and the PCE increased up to 5.11% under 100 mW cm⁻² AM 1.5 illumination. These results demonstrate that the importance of having a control polymer to be synthesized and characterized side by side with the fluorine analogues. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1489–1497     

聚3-己基噻吩：非富勒烯太阳能电池中的量子效率损失和电压损失

From the industrial perspective, poly(3-hexylthiophene) (P3HT) is one of the most attractive donor materials in organic photovoltaics. The large bandgap in P3HT makes it particularly promising for efficient indoor light harvesting, a unique advantage of organic photovoltaic (PV) devices, and this has started to gain considerable attention in the field of PV technology. In addition, the up-scalability and long material stability associated with the simple chemical structure make P3HT one of the most promising materials for the mass production of organic solar cells. However, the solar cells based on P3HT has a low power conversion efficiency (PCE), which is less than 11%, mainly due to significant voltage losses. In this study, we identified the origin of the high quantum efficiency and voltage losses in the P3HT: non-fullerene based solar cells, and we proposed a strategy to reduce the losses. More specifically, we observed that: 1) the non-radiative decay rate of the charge transfer (CT) states formed at the donor–acceptor interfaces was much higher for the P3HT: non-fullerene solar cells than that for the P3HT: fullerene solar cells, which was the main reason for the more severely limited photovoltage; 2) the origin of the high non-radiative decay rate in the P3HT: non-fullerene solar cell could be ascribed to the short packing distance between the P3HT and non-fullerene acceptor molecules at the donor–acceptor interfaces (DA distance), which is a rarely studied interfacial structural property, highly important in determining the decay rate of CT states; 3) the lower voltage loss in the state-of-the-art P3HT solar cell based on the 2, 2'-((12, 13-bis(2-butyldecyl)-3, 9-diundecyl-12, 13-dihydro-[1, 2, 5]-thiadiazolo[3, 4-e]thieno[2', 3': 4', 5']thieno[2', 3': 4, 5]p-yrolo[3, 2-g]thieno[2', 3': 4, 5]thieno[3, 2-b]indole-2, 10-diyl)bis(methanelylidene))bis(5, 6-dichloro-1H-indene-1, 3(2H)-dion-e) (ZY-4Cl) acceptor could be associated with the better alignment of the energy levels of the active materials and the longer DA distance, compared to those based on the commonly used acceptors. However, the DA distance was still very short, limiting the device voltage. Thus, improving the performance of the P3HT based solar cells requires a further increase in the DA distance. Our findings are expected to pave the way for breaking the performance bottleneck of the P3HT based solar cells.     

Enhanced Charge Transfer,Transport and Photovoltaic Efficiency in All‐Polymer Organic Solar Cells by Polymer Backbone Fluorination

We successfully designed and synthesized two BDT‐BT‐T (BDT=benzo[1,2‐b:4,5‐b']dithiophene, BT‐T=4,7‐dithien‐2‐yl‐2,1,3‐benzothiadiazole) based polymers as the electron donor for application in all‐polymer solar cells (all‐PSCs). By adopting N2200 as the electron acceptor, we systematically investigated the impact of fluorination on the charge transfer, transport, blend morphology and photovoltaic properties of the relevant all‐PSCs. A best power conversion efficiency (PCE) of 3.4% was obtained for fluorinated PT‐BT2F/N2200 (BT2F=difluorobenzo[c][1,2,5]thiadiazole) all‐PSCs in comparison with that of 2.7% in non‐fluorinated PT‐BT/N2200 (BT=benzothiadiazole) based device. Herein, all‐polymers blends adopting either non‐fluorinated PT‐BT or fluorinated PT‐BT2F exhibit similar morphology features. In depth optical spectrum measurements demonstrate that molecular fluorination can further enhance charge transfer between donor and acceptor polymer. Moreover, all‐polymer blends exhibit improved hole mobilities and more balanced carriers transport when adopting fluorinated donor polymer PT‐BT2F. Therefore, although the PCE is relatively low, our findings may become important in understanding how subtle changes in molecular structure impact relevant optoelectronic properties and further improve the performance of all‐PSCSs.     

Harvesting solar energy using conjugated metallopolyyne donors containing electron-rich phenothiazine-oligothiophene moieties

A new family of soluble, solution-processable metallopolyynes of platinum(II) functionalized with electron-rich phenothiazine-oligothiophene rings and their corresponding dinuclear model complexes were synthesized and characterized. The organometallic polymers show different degrees of absorption capabilities in the solar spectral region, rendering some of them good electron donors for fabricating bulk heterojunction polymer solar cells by blending with a methanofullerene electron acceptor. The influence of the number of thienyl rings along the polymer chain on the optical and photovoltaic properties of these metallopolymers was studied. At the same donor:acceptor blend ratio of 1:4 or 1:5, the light-harvesting capability and solar cell efficiency notably increase as the number of thienyl rings is doubled. Photoexcitation of the polymer solar cells results in a photoinduced electron transfer from the π-conjugated metallopolyyne to [6,6]-phenyl C₆₁-butyric acid methyl ester and the best-performing polymer showed a power conversion efficiency (PCE) up to ∼1.3% with a corresponding peak external quantum efficiency of 63% under air mass (AM1.5) simulated solar illumination even at shorter absorption wavelength regime. The power dependencies of the solar cell parameters (including the short-circuit current density, open-circuit voltage, fill-factor and PCE) were also tested in detail.     

Synthesis, characterization and photovoltaic properties of a low-bandgap platinum(II) polyyne functionalized with a 3,4-ethylenedioxythiophene-benzothiadiazole hybrid spacer

The synthesis, characterization and optical spectroscopy of a deep blue platinum(II) polyyne functionalized with the (3,4-ethylenedioxythiophene)-benzothiadiazole hybrid spacer (P1) and its dinuclear platinum molecular model complex (M1) are described. This metalated polymer P1 exhibits good thermal stability and possesses a narrow bandgap of 1.76 eV. Optical spectroscopic measurements of these materials reveal a substantial donor-acceptor interaction along the rigid backbone of the organometallic polyynes through the interaction of metal center and the conjugated tricyclic ligand. Preliminary study shows that P1: methanofullerene acceptor blend can be used as an active layer of bulk-heterojunction polymer solar cells. Photoexcitation of this blend layer in some yet-to-be optimized cells results in a photo-induced electron transfer from the π-conjugated metallopolyyne electron donor to [6,6]-phenyl C₆₁-butyric acid methyl ester with a power conversion efficiency (PCE) close to 0.30% under air mass (AM1.5) simulated solar illumination. The power dependencies of the solar cell parameters (including the short-circuit current density, open-circuit voltage, fill-factor and PCE) were also studied.     

Enhanced efficiency of ternary organic solar cells by doping a polymer material in P3HT:PC61BM

Doping a low‐bandgap polymer material (PDTBDT‐DTNT) as a complementary electron donor in poly(3‐hexylthiophene) (P3HT) and [6,6]‐phenyl‐C₆₁‐butyricacid methyl ester (PC₆₁BM) blend is experimented to improve the power conversion efficiency (PCE) of organic solar cells (OSCs). The PCE of OSCs was increased from 3.19% to 3.75% by doping 10 wt% PDTBDT‐DTNT, which was 17.55% higher than that of the OSCs based on binary blend of P3HT:PC₆₁BM (host cells). The short‐circuit current density (J_sc) was increased to 10.11 mA·cm⁻² compared with the host cells. Although the PCE improvement could partly be attributed to more photon harvest for complementary absorption of 2 donors by doping appropriate PDTBDT‐DTNT, the promotion of charge separation and transport as well as the suppression of charge recombination due to a matrix of cascade energy levels is also important. And the better morphology of the active layer films is beneficial to the optimized performance of ternary devices.     

A Non‐Fullerene Acceptor with Chlorinated Thienyl Conjugated Side Chains for High‐Performance Polymer Solar Cells via Toluene Processing

Small molecular acceptors (SMAs) BTC‐2F and BTH‐2F, based on heptacyclic benzodi(cyclopentadithiophene) electron‐donating core (CBT) with chlorinated‐thienyl conjugated and thienyl conjugated side chains, respectively, are designed and synthesized. Compared with non‐chlorine acceptor BTH‐2F, BTC‐2F exhibits slightly blue‐shifted absorption spectra, similar the lowest unoccupied molecular orbital (LUMO) (–3.91 eV), deeper highest occupied molecular orbital (HOMO) energy level and higher electron mobility than that of BTH‐2F. PM6, a wide bandgap polymer, is selected as the donor material to construct bulk heterojunction polymer solar cells processed with nonhalogenated solvent toluene. The optimized PM6:BTC‐2F‐based device presents a 12.9% power conversion efficiency (PCE), while the PCE of PM6:BTH‐2F‐based device is only 11.3%. The results suggest that it is an effective strategy to optimize the photoelectric properties of SMAs by incorporating chlorine atom into the conjugated side chains.     

基于无规三元共聚物的非卤溶液加工型高效聚合物太阳能电池

在本工作中,我们以烷硫基噻吩基取代的苯并二噻吩(BDTT-S)为给体单元、5, 6-二氟取代苯并三唑(FBTz)和噻唑并噻唑(TTz)为弱吸收电子受体单元,设计合成了一系列宽带隙的无规三元共聚物给体材料。通过改变两个受体单元FBTz和TTz在聚合物中的摩尔比,有效调节了聚合物的光学、电化学、分子排列以及电荷传输性能。最终,使用非卤溶剂为加工溶剂,以三元共聚物PSBTZ-60为给体、ITIC为非富勒烯受体的聚合物太阳能电池(PSCs)获得了10.3%的能量转换效率(PCE),其中开路电压为0.91 V,短路电流为18.0 mA·cm⁻²,填充因子为62.7%;与之相比,在相同的器件制备条件下,基于PSTZ:ITIC的PSCs仅获得8.5%的PCE,基于PSBZ:ITIC的PSCs也仅获得8.1%的PCE。这些结果表明：三元无规共聚能够作为一种简单且实用的策略去设计、合成高性能聚合物光伏材料。     

基于侧链不对称喹喔啉聚合物的高效非富勒烯太阳电池

喹喔啉衍生物由于合成简单,易功能化,成本较低等特点在众多领域都有广泛应用。其自身具有平面刚性结构,也是构建光电聚合物的重要单体。基于喹喔啉单元的有机分子化学结构和电子结构可修饰性强,通过骨架、侧链和取代基等修饰,易于调控分子的能级和吸光光谱,因此,当使用喹喔啉体系的共轭给体与球形富勒烯受体(如PCBM)及弱结晶性非富勒烯受体(如ITIC)均可表现出优异的光伏性能。在本工作中,基于结晶性较强的非富勒烯受体(o-IDTBR),我们首次制备出侧链不对称喹喔啉(简称：不对称喹喔啉)基聚合物(TPQ-1)与之匹配。相比于侧链对称性喹喔啉(简称：对称喹喔啉)(HFQx-T)与o-IDTBR组合,“弱结晶给体-强结晶受体”组合能表现出更佳均匀的相分离尺度,从而获得更高的短路电流及能量转换效率。TPQ-1与o-IDTBR共混后器件效率为8.6%,加入15%的TB7-Th后,器件效率达到9.6%。     

Donor-acceptor conjugated polymer based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for high-performance polymer solar cells

Donor-acceptor conjugated polymers PBDT-DTBT and PBDT-DTNT, based on 2,1,3-benzothiadiazole (BT) and naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole (NT), have been designed and synthesized for polymer solar cells. NT contains two fused 1,2,5-thiadiazole rings that lower the band gap, enhance the interchain packing, and improve the charge mobility of the resulting polymer. Consequently, the NT-based polymer PBDT-DTNT exhibited considerably better photovoltaic performance with a power conversion efficiency (PCE) of 6.00% when compared with the BT-based polymer PBDT-DTBT, which gave a PCE of 2.11% under identical device configurations.     

以三聚茚为核的星型电子受体材料的合成、 表征与光伏性能

以高度平面共轭的烷基取代三聚茚为中心核, 以噻吩基团桥联, 在末端连接氰基茚酮作为拉电子基团, 设计合成了一类星型受体分子2,2',2″-{[(5,5,10,10,15,15-己基-10,15-二氢-5H-二茚[1,2-a：1',2'-c]芴-2,7,12-三基)三(噻吩-5,2-二基)]三(亚甲基)}三(3-氧杂-2,3-二氢-1H-茚-2,1-二叉)三丙二腈(NFT-C6)和2,2',2″-{[(5,5,10,10,15,15-癸基-10,15-二氢-5H-二茚[1,2-a：1',2'-c]芴-2,7,12-三基)三(噻吩-5,2-二基)]三(亚甲基)}三(3-氧杂-2,3-二氢-1H-茚-2,1-二叉)三丙二腈(NFT-C10). NFT-C6和NFT-C10的最高占据轨道(HOMO)和最低未占轨道(LUMO)分别位于-5.66和-3.75 eV. 其薄膜在400~700 nm范围内具有较大的吸收强度, 最大吸收峰分别位于606和586 nm. 以聚[(2,6-{4,8-二[5-(2-乙基己基)噻吩-2-基]-苯并[1,2-b：4,5-b']二噻吩})-{5,5-(1',3'-二-2-噻吩基-5',7'-二(2-乙基己基)苯并[1',2'-c：4',5'-c']二噻吩-4,8-二酮)}](PBDB-T)为给体材料, 以NFT-C6或NFT-C10为受体材料制备了太阳能电池器件, 器件在300~700 nm之间具有较宽的响应光谱, 其光电转换效率(PCE)分别达到1.09%和5.23%. 原子力显微镜(AFM)结果表明, PBDB-T和NFT-C10共混制备的光伏器件活性层具有合适的相分离尺寸, 有利于激子的有效解离, 而PBDB-T: NFT-C6器件的活性层相分离尺寸过大, 增加了激子复合的几率, 使器件的短路电流、 填充因子和PCE降低. 研究结果表明, 基于三聚茚的星型光伏材料具有一定的应用前景.     

Thieno[3,4‐b]pyrazine‐based low bandgap photovoltaic copolymers: Turning the properties by different aza‐heteroaromatic donors

A new series of low‐bandgap copolymers based on electron‐accepting thieno[3,4‐b]pyrazine (TPZ) and different electron‐donating aza‐heteroaromatic units, such as carbazole (CZ), dithieno[3,2‐b:2′,3′‐d]pyrrole (TPR) and dithieno[3,2‐b:2′,3′‐e]pyridine (TPY), have been synthesized by Suzuki or Stille coupling polymerization. The resulting copolymers were characterized by NMR, elemental analysis, gel permeation chromatography, thermogravimetric analysis, and differential scanning calorimetry. UV–vis absorption and cyclic voltammetry measurements show that TPZ‐based copolymer with TPR has the best absorption due to the strongest intramolecular charge transfer effect and smallest bandgap. The basic electronic structure of D‐A model compounds of these copolymers were also studied by density functional theory (DFT) calculations. The conclusion of calculation agreed also well with the experimental results. The polymer solar cells (PSCs) based on these copolymers were fabricated with a typical structure of ITO/PEDOT:PSS/copolymer:PC₇₁BM/Ca/Al under the illumination of AM 1.5G, 100 mW cm^?2. The performance results showed that TPZ‐based copolymer with TPR donor segments showed highest efficiency of 1.55% due to enhanced short‐circuit current density. The present results indicate that good electronic, optical, and photovoltaic properties of TPZ‐based copolymers can be achieved by just fine‐tuning the structures of aza‐heteroaromatic donor segments for their application in PSCs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thieno[3,4‐c]pyrrole‐4,6‐dione‐3,4‐difluorothiophene Polymer Acceptors for Efficient All‐Polymer Bulk Heterojunction Solar Cells

Branched‐alkyl‐substituted poly(thieno[3,4‐c]pyrrole‐4,6‐dione‐alt‐3,4‐difluorothiophene) (PTPD[2F]T) can be used as a polymer acceptor in bulk heterojunction (BHJ) solar cells with a low‐band‐gap polymer donor (PCE10) commonly used with fullerenes. The “all‐polymer” BHJ devices made with PTPD[2F]T achieve efficiencies of up to 4.4 %. While, to date, most efficient polymer acceptors are based on perylenediimide or naphthalenediimide motifs, our study of PTPD[2F]T polymers shows that linear, all‐thiophene systems with adequately substituted main chains can also be conducive to efficient BHJ solar cells with polymer donors.