Detection of OH radical and O atom during triboluminescence of hydrated cerium/terbium sulfates

Triboluminescence of Се₂(SO₄)₃·8H₂O and Tb₂(SO₄)₃·8H₂O crystals has been studied. For the first time spectral evidence for a contribution of light-emitting products OH^? (283 and 290 nm maxima, 1–0 transition; 308.4 and 309.6 nm, 0–0 transition) and excited oxygen atom O^? (777 nm, 3P⁵P—3S⁵S) produced via mechano-chemical decomposition of H₂O and O₂ molecules in the destruction of crystal hydrates of the salts to the gas-phase component of triboluminescence has been obtained.     

Chemical diffusion of water in the double perovskites Ba4Ca2Nb2O11 and Sr6Ta2O11

The mechanism and kinetics of water incorporation in the double perovskites Ва₄Ca₂Nb₂O₁₁ and Sr₆Ta₂O₁₁ has been investigated (T = 300÷500 °C and aH₂O = 1 · 10^− 3÷2.2 · 10^− 2). The formation of hydration products Ba₄Ca₂Nb₂O₁₁·xH₂O and Sr₆Ta₂O₁₁·xH₂O (0.2 < x < 0.50) was limited by the diffusion of H₂O. It has been found that the concentration dependences of D˜_H2O are the same for both samples: small increasing of D˜_H2O with increasing x. The temperature dependences of the chemical diffusion coefficients of water for compositions of Ba₄Ca₂Nb₂O₁₁·0.35H₂O and Sr₆Ta₂O₁₁·0.35H₂O could be described with close activation energies of E_a = 0.38 ± 0.03 eV and E_a = 0.49 ± 0.03 eV, respectively. The chemical diffusion coefficients of water are nearly one order of magnitude smaller for tantalate Sr₆Ta₂O₁₁. This result correlates with lower oxygen and proton conductivities in Sr₆Ta₂O₁₁ as the consequence of lower mobilities.     

Preparation via solid-state reaction at room temperature and characterization of layered nanocrystalline NH4MnPO4·H2O

The layered nanocrystalline NH₄MnPO₄·H₂O was obtained by grinding MnSO₄·H₂O and (NH₄)₃PO₄·3H₂O in the presence of surfactant PEG-400 via a solid-state reaction at room temperature, maintaining the mixture at room temperature for 12 h, washing the mixture with water, and drying at 60 °C. The resulting NH₄MnPO₄·H₂O and its products of thermal decomposition were characterized using thermogravimetry and differential thermal analyses (TG/DTA), IR, X-ray powder diffraction (XRD), scanning electron microscopy (SEM), UV–vis, and magnetic susceptibility. The data showed that when dried at 60 °C for 5 h, highly crystallized orthorhombic NH₄MnPO₄·H₂O (space group Pmnm(59)) was obtained with an average particle size of 45 nm and an average interlayer distance of 0.8701 nm. On the other hand, monoclinic nanocrystalline Mn₂P₂O₇ with space group C2/m(12) was obtained when the product was calcined at 600 °C for 3 h. Magnetic susceptibility measurements from room temperature to 2.5 K point to ferrimagnetic ordering at T_N～17 K.     

CO and H2O adsorption and reaction on Au(310)

We have studied desorption of ¹³CO and H₂O and desorption and reaction of coadsorbed, ¹³CO and H₂O on Au(310). From the clean surface, CO desorbs mainly in, two peaks centered near 140 and 200 K. A complete analysis of desorption spectra, yields average binding energies of 21 ± 2 and 37 ± 4 kJ/mol, respectively. Additional desorption states are observed near 95 K and 110 K. Post-adsorption of H₂O displaces part of CO pre-adsorbed at step sites, but does not lead to CO oxidation or significant shifts in binding energies. However, in combination with electron irradiation, ¹³CO₂ is formed during H₂O desorption. Results suggest that electron-induced decomposition products of H₂O are sheltered by hydration from direct reaction with CO.     

Novel clays: Solid-state synthesis,characterization and cation exchange selectivity

Several novel swelling mica-type clays have been synthesized by solid-state processes. Synthetic clays of ideal compositions such as Na₂Si₆Al₂Mg₆O₂₀F₄ · xH₂O (Na-2-mica), Na₃Si₅Al₃Mg₆O₂₀F₄ · xH₂O (Na-3-mica) and Na₄Si₄Al₄Mg₆O₂₀F₄ · xH₂O (Na-4-mica) have been prepared and characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and ²⁷Al and ²⁹Si solid-state magic angle spinning nuclear magnetic resonance (MASNMR) spectroscopy. Powder XRD showed that all syntheses yielded water swollen micas with c-axis spacing of ∼1.2 nm except in the case of Na-2-mica which also showed a small peak of anhydrous mica phase with a c-axis spacing of 0.96 nm. Solid-state ²⁷Al MASNMR spectroscopy revealed that almost all the Al is present in the tetrahedral environment of the different micas. Solid-state ²⁹Si MASNMR spectroscopy revealed different Si (Al) nearest neighbor environments depending upon the composition of the various micas. Selective cation exchange studies were performed on the various micas using 0.5 N NaCl solution containing 12.9 ppm Sr²⁺ or 8.12 ppm of La³⁺. The results showed, for the first time, that Na-3-mica has a high selectivity for the trivalent cation tested. The previously reported high selectivity of these synthetic micas for the divalent cations has been confirmed. These selective cation exchange studies are of relevance in cation separations from drinking and waste waters.     

Drastic effects of fast neutrons and γ-irradiation on the DC conductivity of Co-, Ni-, Mn- and Ag-gelatin doped films

The effect of fast neutron fluencies and γ-rays on the DC conductivity, ln(σ), for pure gelatin and that doped with 5, 10, and 15 wt% of CoCl₂ · 6H₂O, and 5 wt% of NiCl₂ · 6H₂O, MnCl₂ · 2H₂O and AgNO₃ has been respectively investigated at different temperatures. Fast neutron fluencies and γ-rays doses are set from 7.60 × 10⁵ to 0.50 × 10⁹ N/cm², and 0.25 up to 1.50 Gy, respectively. The calculated values of activation energies (E_a) are found to be dependent on the radiation doses. The conductivity of gelatin samples shows an interesting behavior, which depends on the dopant Co concentration and the exposure dose. DC conductivity of the investigated samples reveals that the ionic conduction has been established at higher temperatures and fast neutron fluencies and γ-rays doses, while the electronic one plays an important role at lower temperatures. This has been related to the crosslinking formations as a result of the interaction between the exposure dose and gelatin sample. The attained results suggest strongly the applicability of these materials in dosimetry.     

Anatase TiO2 nanocrystals prepared by mechanochemical synthesis and their photochemical activity studied by EPR spectroscopy

Anatase TiO₂ has been prepared by mechanochemical synthesis using TiOSO₄·xH₂O and Na₂CO₃ as starting reactants. The reaction was performed in high-energy ball mill using steel and corundum jars, respectively. The final products were obtained by annealing the milled powder in the temperature range of 300–700 °C and subsequently by washing out the water-soluble byproduct Na₂SO₄·xH₂O. When steel jars were used, the annealing in the range of 300–600 °C led to anatase. For products milled in corundum, the stability of anatase increased up to 700 °C. Transition electron microscopy (TEM) showed that crystallites with a size in the range of 20–50 nm with equiaxed morphology were obtained after milling in corundum and annealing at 600 and 700 °C. The process of photoinduced reactive hydroxyl radical generation in aerated aqueous titania suspensions was studied by EPR spectroscopy using spin trapping technique. The presence of iron impurities in the samples milled in steel substantially decreases the radical formation. The rate of radical formation is substantially affected by particle size development of TiO₂ nanopowders. The product milled in corundum and annealed at 700 °C outperforms more than twice the photochemical activity of TiO₂ Degussa P25 standard.     

Preparation of monodisperse magnetite nanoparticles under mild conditions

In this paper, we reported a method to prepare monodisperse magnetite nanoparticles at mild temperature using cheap and non-toxic precursors. It overcomes the shortages of chemical co-precipitation method and thermal decomposition method and combines the advantages of facile, cheap, large-scale, monodisperse, nanosize, and low synthesis temperature and low toxic. In this method, FeCl₃ · 6H₂O, FeCl₂ · 4H₂O and sodium oleate were mixed in toluene/ethanol/water mixture solvent and refluxed at 74 °C to prepare magnetite nanoparticles directly. The nanoparticles were characterized by transmission electron microscopy, dynamic light scattering, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectrometer and thermogravimetric analysis. The magnetic properties of nanoparticles were measured by superconducting quantum interference device. The results showed that the nanoparticles are well-monodisperse with about 4–5 nm of average diameter. The nanoparticles were proved to be superparamagnetic with saturated magnetization 23.6 emu/g and blocking temperature 24.4 K. A possible formation mechanism of monodisperse magnetite nanoparticles was presented at the same time.     

Surface modification of Ni and Co metal nanowires through MeV high energy ion irradiation

Nickel (Ni) and cobalt (Co) metal nanowires were fabricated by using an electrochemical deposition method based on an anodic alumina oxide (Al₂O₃) nanoporous template. The electrolyte consisted of NiSO₄ · 6H₂O and H₃BO₃ in distilled water for the fabrication of Ni nanowires, and of CoSO₄ · 7H₂O with H₃BO₃ in distilled water for the fabrication of the Co ones. From SEM and TEM images, the diameter and length of both the Ni and Co nanowires were measured to be ∼ 200 nm and 5–10 μm, respectively. We observed the oxidation layers in nanometer scale on the surface of the Ni and Co nanowires through HR–TEM images. The 3 MeV Cl²⁺ ions were irradiated onto the Ni and Co nanowires with a dose of 1 × 10¹⁵ ions/cm². The surface morphologies of the pristine and the 3 MeV Cl²⁺ ion-irradiated Ni and Co nanowires were compared by means of SEM, AFM, and HR–TEM experiments. The atomic concentrations of the pristine and the 3 MeV Cl²⁺ ion-irradiated Ni and Co nanowires were investigated through XPS experiments. From the results of the HR–TEM and XPS experiments, we observed that the oxidation layers on the surface of the Ni and Co nanowires were reduced through 3 MeV Cl²⁺ ion irradiation.     

Ultrasound irradiation effect on morphology and size of two new potassium coordination supramolecule compounds

Two new potassium coordination supramolecular compounds (2D and 1D), [K(H₃L)(H₂L)(H₂O)]_n·H₂O (1) and [K(H₂L′)(HL′)(H₂O)₂]·H₂O (2), (L = 1,3,5-tricarboxylic acid, L′ = 2,6-pyridinedicarboxylic acid), have been synthesized under different experimental conditions. Micrometric crystals (bulk) or nano-sized materials have been obtained depending on using the branch tube method or sonochemical irradiation. All materials have been characterized by field emission scanning electron microscopy (FE-SEM), scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), FT-IR spectroscopy and elemental analyses. Single crystal X-ray analyses on compounds 1 and 2 show that K⁺ ions are 3- and 7-coordinated, respectively. Additionally, H-bonds incorporate the layers and chains in 1 and 2 into 3D and 2D (along (0,0,1) direction) frameworks. Topological analysis shows that the compound 1 and 2 are 3,6-coordinated kgd and 2,4-coordinated 2,4C4 net. The thermal stability of compounds 1 and 2 in bulk and nano-size has been studied by thermal gravimetric (TG) and differential thermal analyses (DTA) and compared each other. The role of different parameters like temperature, reaction time and ultrasound irradiation power on the growth and morphology of the nano-structures are studied. Results suggest that an increase of temperature, sonication power and reduction of reaction time led to a particle size decrease.     

Ferromagnetic order and spin-glass behavior in multi-metallic compound Ni1.125Co0.375[Fe(CN)6] · 6.8H2O

Multi-metallic Prussian blue compound Ni_1.125Co_0.375[Fe(CN)₆] · 6.8H₂O has been synthesized. The Mössbauer spectroscopy at room temperature and IR spectra study revealed that the metal ions are bonded through cyanide ligand and the presence of low spin Fe^III(S = 1/2) and high spin Fe^III(S = 5/2) ions, as showed in these structure: Fe^III(S = 1/2)-CN-(Co^II/Ni^II)(96%) and Fe^III(S = 5/2)-NC-(Co^II/Ni^II) (4%). The Curie constant of C = 3.00 cm³ K mol⁻¹ and Weiss paramagnetic Curie temperature of θ = 16.43 K were observed in fitting according to Curie–Weiss law. These results indicate that there existed a ferromagnetic exchange interaction in the complexes. The observed value of coercive field (H_c) and remanent magnetization (M_r) at 4 K for the compound are 497 Oe and 1.03 Nβ. The presence of spin-glass behaviours in the compound is ascribed mainly to domain mobility or domain growth under different cooling conditions.     

Structural evolution,growth mechanism and photoluminescence properties of CuWO4 nanocrystals

Copper tungstate (CuWO₄) crystals were synthesized by the sonochemistry (SC) method, and then, heat treated in a conventional furnace at different temperatures for 1 h. The structural evolution, growth mechanism and photoluminescence (PL) properties of these crystals were thoroughly investigated. X-ray diffraction patterns, micro-Raman spectra and Fourier transformed infrared spectra indicated that crystals heat treated and 100 °C and 200 °C have water molecules in their lattice (copper tungstate dihydrate (CuWO₄·2H₂O) with monoclinic structure), when the crystals are calcinated at 300 °C have the presence of two phase (CuWO₄·2H₂O and CuWO₄), while the others heat treated at 400 °C and 500 °C have a single CuWO₄ triclinic structure. Field emission scanning electron microscopy revealed a change in the morphological features of these crystals with the increase of the heat treatment temperature. Transmission electron microscopy (TEM), high resolution-TEM images and selected area electron diffraction were employed to examine the shape, size and structure of these crystals. Ultraviolet–Visible spectra evidenced a decrease of band gap values with the increase of the temperature, which were correlated with the reduction of intermediary energy levels within the band gap. The intense photoluminescence (PL) emission was detected for the sample heat treat at 300 °C for 1 h, which have a mixture of CuWO₄·2H₂O and CuWO₄ phases. Therefore, there is a synergic effect between the intermediary energy levels arising from these two phases during the electronic transitions responsible for PL emissions.     

Trapping of metastable high-spin species and weak cooperativity in a mononuclear Fe(II) spin-crossover system

The magnetic and structural properties of three gradual spin transition monomeric compounds based on the cation [Fe(Hpt)₃]²⁺ (Hpt=3-(pyrid-2-yl)-1,2,4-triazole) are presented. The non-cooperative character of the spin-crossover in [Fe(Hpt)₃](BF₄)₂·2H₂O (I) is evaluated in light of its calorimetric properties, which yielded the thermodynamic values Δ_trsH=5.81 kJ mol⁻¹ and Δ_trsS=39.5 J mol⁻¹ K⁻¹. The light-induced excited spin-state trapping effect is performed on [Fe(Hpt)₃](BF₄)₂·2H₂O (I) and [Fe(Hpt)₃](SO₄)_0.4(BF₄)_1.2·3H₂O (II), and the subsequent HS→LS relaxations are studied. Their merely first-order kinetics are affected by disorder in the structure of both complexes, which appears in the presence of a distribution of activation energies. HS species can also be frozen-in in I by rapid cooling. Continuous irradiation is shown to induce only apparent light-induced thermal hysteresis effect in I and II, stemming from slow kinetics of relaxation with respect to the kinetics of measurement.     

Influence of chlorinated paraffin/titanium additives on burning and radiance performances of Magnesium/Teflon/Viton(MTV) foil-type composition

The influence of chlorinated paraffin/titanium (C₂₄H₂₉Cl₂₁/Ti) additives on burning and radiance performances of Magnesium/Teflon/Viton™ (MTV) foil-type was investigated via a high-speed camera, high-temperature differential thermobalance, far-infrared thermal imager and Fourier Transform Infrared (FTIR) remote-sensing spectrometer. We found that the burning temperature, radiance brightness, radiance area and radiance intensity after addition of C₂₄H₂₉Cl₂₁/Ti are improved by 124–196 °C (8–13%), 300–475 W·m⁻²·sr⁻¹ (12–19%), 943–1422 mm² (67–101%) and 3.17–4.99 W·sr⁻¹ (88–138%), respectively, and are maximized at the addition ratio of 10%. The substances formed by adding C₂₄H₂₉Cl₂₁/Ti could improve the middle and far infrared radiation.     

Effect of processing conditions on sonochemical synthesis of nanosized copper aluminate powders

Nanosized copper aluminate (CuAl₂O₄) spinel particles have been prepared by a precursor approach with the aid of ultrasound radiation. Mono-phasic copper aluminate with a crystallite diameter of 17 nm along the (3 1 1) plane was formed when the products were synthesized using Cu(NO₃)₂·6H₂O and Al(NO₃)₃·9H₂O as starting materials, with urea as a precipitation agent at a concentration of 9 M. The reaction was carried out under ultrasound irradiation at 80 °C for 4 h and a calcination temperature of 900 °C for 6 h. The synthesized copper aluminate particles and the effect of different processing conditions such as the copper source, precipitation agents, sonochemical reaction time, calcination temperature and time were analyzed and characterized by the techniques of powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM) and Fourier transformation infrared spectroscopy (FT–IR).     

Synthesis and growth of sodium bitartrate monohydrate a new organometallic nonlinear optical single crystal

Sodium bitartrate monohydrate (SBTMH) a new organometallic nonlinear optical material, with molecular formula, [C₄H₅NaO₆ · H₂O] has been synthesized at ambient temperature. Spectral, thermal and optical techniques have been employed to characterize the new material. Bulk single crystals of size 13 × 4 × 4 mm³ of SBTMH have been grown by slow cooling method. The unit cell parameters of the grown crystal were determined by single crystal XRD. Functional groups present in the sample were identified by FTIR spectral analysis. Thermal stability of SBTMH was determined using TGA/DTA. The grown crystals exhibit nonlinear properties. The dielectric response of the crystal with varying frequencies was studied. The optical transparency range and the lower cut-off wavelength of the material were identified from the UV–vis–NIR absorption spectrum.     

Electrochemical characterization on layered lithium ruthenate for electrochemical supercapacitors

Electrochemical characteristics of lithium ruthenate (Li_xRuO_2+0.5x·nH₂O) for electrochemical capacitors' electrode material were first examined in this paper by cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic charge–discharge tests. Results show that Li_xRuO_2+0.5x·nH₂O has electrochemical capacitive characteristic within the potential range of − 0.2–0.9 V (vs. SCE) in 1 M Li₂SO₄ solution. The capacitance mainly arises from pseudo-capacitance caused by lithium ions' insertion/extraction into/out of the Li_xRuO_2+0.5x·nH₂O electrode. The specific capacitance of 391 F g^− 1 can be delivered at 1 mA charge–discharge current for Li_xRuO_2+0.5x·nH₂O electrode with an energy density of 65.7 W h kg^− 1. This material also exhibits an excellent cycling performance and there is no attenuation of capacitance over 600 cycles.     

Ultrasound-induced emulsification of subcritical carbon dioxide/water with and without surfactant as a strategy for enhanced mass transport

Pulsed ultrasound was used to disperse a biphasic mixture of CO₂/H₂O in a 1 dm³ high-pressure reactor at 30 °C/80 bar. A view cell positioned in-line with the sonic vessel allowed observation of a turbid emulsion which lasted approximately 30 min after ceasing sonication. Within the ultrasound reactor, simultaneous CO₂-continuous and H₂O-continuous environments were identified. The hydrolysis of benzoyl chloride was employed to show that at similar power intensities, comparable initial rates (1.6 ± 0.3 × 10^–3 s^–1 at 95 W cm^–2) were obtained with those reported for a 87 cm³ reactor (1.8 ± 0.2 × 10^–3 s^–1 at 105 W cm^–2), demonstrating the conservation of the physical effects of ultrasound in high-pressure systems (emulsification induced by the action of acoustic forces near an interface). A comparison of benzoyl chloride hydrolysis rates and benzaldehyde mass transport relative to the non-sonicated, ‘silent’ cases confirmed that the application of ultrasound achieved reaction rates which were over 200 times faster, by reducing the mass transport resistance between CO₂ and H₂O. The versatility of the system was further demonstrated by ultrasound-induced hydrolysis in the presence of the polysorbate surfactant, Tween, which formed a more uniform CO₂/H₂O emulsion that significantly increased benzoyl chloride hydrolysis rates. Finally, pulse rate was employed as a means of slowing down the rate of hydrolysis, further illustrating how ultrasound can be used as a valuable tool for controlling reactions in CO₂/H₂O solvent mixtures.     

Proton transfer in water–hydroxyl mixed overlayers on Pt(1 1 1): Combined approach of laser desorption and spatially-resolved X-ray photoelectron spectroscopy

Proton transfer in water–hydroxyl mixed overlayers on a Pt(1 1 1) surface was studied by a combination of laser induced thermal desorption (LITD) method and spatially-resolved X-ray photoelectron spectroscopy (micro-XPS). The modulated pattern OH + H₂O/H₂O/OH + H₂O was initially prepared by the LITD method; vacant area with a 400 μm width was first formed in the mixed OH + H₂O overlayer by irradiation of focused laser pulses, and followed by refilling the vacant area with pure H₂O. Spatial distribution changes of OH and H₂O were measured as a function of time with the micro-XPS technique, which indicated that H₂O molecules in the central region flow into the OH + H₂O region. From quantitative analyses using a diffusion equation, we found that the proton transfer in the mixed overlayer consists of at least two pathways: direct proton transfer from H₂O to OH in the nearest site and the proton transfer to the next-nearest site via H₃O⁺ formation. The time scale of first and second path was estimated to be 5.2 ± 0.9 ns and 48 ± 12 ns at 140 K, respectively. In the presence of water capping layer, however, the rate of proton transfer is reduced by an order of magnitude, which would be explained by peripatetic behavior of proton into H₂O capping layer.