Solubilization of nutraceuticals into reverse hexagonal mesophases

The solubilization of four bioactive molecules with different polarities, in three reverse hexagonal (HII) systems has been investigated. The three HII systems were a typical reverse hexagonal composed of glycerol monooleate (GMO)/tricaprylin/water and two fluid hexagonal systems containing either 2.75 wt % Transcutol or ethanol as a fourth component. The phase behavior of the liquid crystalline phases in the presence of ascorbic acid, ascorbyl palmitate, D-alpha-tocopherol and D-alpha-tocopherol acetate were determined by small-angle X-ray scattering (SAXS) and optical microscopy. Differential scanning calorimetry (DSC) and Fourier-transform infrared (FT-IR) techniques were utilized to follow modifications in the thermal behavior and in the vibrations of different functional groups upon solubilizing the bioactive molecules. The nature of each guest molecule (in both geometry and polarity) together with the different HII structures (typical and fluids) determined the corresponding phase behavior, swelling or structural transformations and its location in the HII structures. Ascorbic acid was found to act as a chaotropic guest molecule, localized in the water-rich core and at the interface. The AP was also a chaotropic guest molecule with its head located in the vicinity of the GMO headgroup while its tail embedded close to the surfactant tail. D-alpha-tocopherol and D-alpha-tocopherol acetate were incorporated between the GMO tails; however, the D-alpha-tocopherol was located closer to the interface. Once Transcutol or ethanol was present and upon guest molecule incorporation, partial migration was detected.     

Transitions induced by solubilized fat into reverse hexagonal mesophases

Lyotropic liquid crystals of glycerol monooleate (GMO) and water binary mixtures have been extensively studied and their resemblance to human membranes has intrigued many scientists. Biological systems as well as food mixtures are composed of lipids and fat components including triacylglycerols (TAGs, triglycerides) that can affect the nature of the assembly of the mesophase. The present study examines the effect of TAGs of different chain lengths (C(2)-C(18)) at various water/GMO compositions, on phase transitions from lamellar or cubic to reverse hexagonal (L(alpha)-H(II) and Q-H(II)). The ability of the triglycerides to promote the formation of an H(II) mesophase is chain length-dependent. It was found that TAG molecules with very short acyl chains (triacetin) can hydrate the head groups of the lipid and do not affect the critical packing parameter (CPP) of the amphiphile; therefore, they do not affect the self-assembly of the GMO in water, and the mesophase remains lamellar or cubic. However, TAGs with medium chain fatty acids will solvate the tails of the lipid, and will affect the CPP of the GMO, and transform the lamellar or cubic phases into hexagonal mesophase. TAGs with long chain fatty acids are very bulky, not very miscible with the GMO, and therefore, kinetically are very slow to solvate the lipid tails of the amphiphile and are difficult to accommodate into the lipophilic parts of the GMO. Their effect on the transitions from a lamellar or cubic phase to hexagonal is detected only after months of equilibration. In order to enhance the effect of the TAG on the phase transitions in the GMO/triglyceride/water systems, temperature and electrolytes effects were examined. In the presence of short and medium chain triglycerides, increasing temperature caused a transition from lamellar or hexagonal to L(2) phase (highest CPP value). However, in the presence of long chain TAGs, increasing temperature to ca. 40 degrees C caused a formation of H(II) mesophase. In addition, it was found that in tricaprylin/GMO/water systems, the increase in temperature caused a decrease in the lattice parameter. The effect of NaCl on the H(II) mesophase revealed interesting results. At low concentration of tricaprylin (5 wt%), the addition of only 0.1 wt% of NaCl was sufficient to cause the formation of well-defined H(II) mesophase, while further addition of electrolyte increased the hexagonal lattice parameters. At higher TAGs concentrations (10 wt%), addition of electrolyte resulted in the formation of H(II) with modifications of the lattice parameter. All the examined effects were more pronounced with increasing water content.     

Structural properties of lecithin based reverse hexagonal (HII) liquid crystals and in vitro release of dihydromyricetin

Dihydromyricetin (DMY) was encapsulated to lecithin based reverse hexagonal (H_II) liquid crystals to improve its solubility limitation. PEG 400 was used as the representative oil phase. The H_II mesophases were identified by means of polarized light microscopy (POM) and small angle X-ray scattering (SAXS). The DMY was solubilized in interface layer inferred from the increase of the interfacial area of per surfactant a_s and the infrared spectra. The hexagonal samples showed highly elastic Maxwell properties and shear thinning properties indicated by their rheological spectra. Moreover with the decrease of PEG 400 content, the internal structure of samples apparently becomes more stable, as indicated by the increase in the storage and loss moduli and the decrease in a_s. Oleic acid enhances the viscoelasticity of sample and increases the release stability for DMY under acidic conditions. The in vitro release of DMY in H_II matrices showed that carriers have an ideal sustained release effect. The release of DMY was controlled by concentration diffusion.     

The role of glycerol and phosphatidylcholine in solubilizing and enhancing insulin stability in reverse hexagonal mesophases

The potential of reverse hexagonal mesophases based on monoolein (GMO) and glycerol (as cosolvent) to facilitate the solubilization of proteins, such as insulin was explored. H(II) mesophases composed of GMO/decane/water were compared to GMO/decane/glycerol/water and GMO/phosphatidylcholine (PC)/decane/glycerol/water systems. The stability of insulin was tested, applying external physical modifications such as low pH and heat treatment (up to 70°C), in which insulin is known to form ordered amyloid-like aggregates (that are associated with several neurodegenerative diseases) with a characteristic cross β-pleated sheet structure. The impact of insulin confinement within these carriers on its stability, unfolding, and aggregation pathways was studied by combining SAXS, FTIR, and AFM techniques. These techniques provided a better insight into the molecular level of the "component interplay" in solubilizing and stabilizing insulin and its conformational modifications that dictate its final aggregate morphology. PC enlarged the water channels while glycerol shrank them, yet both facilitated insulin solubilization within the channels. The presence of glycerol within the mesophase water channels led to the formation of stronger hydrogen bonds with the hosting medium that enhanced the thermal stability of the protein and remarkably affected the unfolding process even after heat treatment (at 70°C for 60 min).     

Copolymer-induced stabilizing effect of highly swollen hexagonal mesophases

We show that small amounts of copolymer that decorate an oil/water interface can greatly enhance the stability of swollen surfactant hexagonal phases, comprising oil tubes regularly arranged in a water matrix. Both the radius of the tubes and the thickness of the aqueous channel between the tubes can be controlled independently over large ranges. Such soft composite materials offer a potential interest for the synthesis of mesoporous materials.     

Elliptical diffusion of dye in hexagonal columnar polycatenar mesophases

We have studied polycatenar compounds which exhibit hexagonal columnar mesophases. In the planar orientation of these mesophases, the elliptical diffusion of the dissolved dyes is visualized by taking several pictures of the sample. The diffusion ratio D// /D is deduced for these columnar mesophases. Furthermore, using a classical optical absorption technique, we present measurements of dye diffusion in the same mesophases. The diffusion constants are measured in two geometries, along and perpendicular to the columns. The diffusion anisotropy ratios are in agreement with those deduced from the ellipse axes. The structure of these new columnar mesophases exhibited by rod-like mesogens is compared with that of disk-like mesogens.     

Elliptical diffusion of dye in hexagonal columnar polycatenar mesophases

We have studied polycatenar compounds which exhibit hexagonal columnar mesophases. In the planar orientation of these mesophases, the elliptical diffusion of the dissolved dyes is visualized by taking several pictures of the sample. The diffusion ratio D// /D is deduced for these columnar mesophases. Furthermore, using a classical optical absorption technique, we present measurements of dye diffusion in the same mesophases. The diffusion constants are measured in two geometries, along and perpendicular to the columns. The diffusion anisotropy ratios are in agreement with those deduced from the ellipse axes. The structure of these new columnar mesophases exhibited by rod-like mesogens is compared with that of disk-like mesogens.     

Unusual molecular packing within the low symmetry mesophases of alkyl- and alkoxy-acylhydrazinatonickel(II) liquid crystals

Three series of novel thermotropic metallomesogens have been synthesized and characterized using microscopy and DSC. Unexpected X-ray scattering is observed within all of the observed mesophases. Diffuse in-layer reflections are observed both at angles corresponding to approximately twice the molecular width and to the side-by-side separation of molecules within the nematic, SmA and SmC mesophases. Furthermore, the tilt angles within the SmC phases are observed to decrease as the terminal chain lengths decrease. Conoscopic observations show the SmC phases to be strongly biaxial as expected, but surprisingly, weak biaxiality is also observed within both the SmA and nematic mesophases. A model to explain the results is proposed, in which the cores remain orthogonal to the layers, whilst the overall molecular tilt necessary for SmC phase formation is provided by the contribution of the terminal alkyl chains to the overall molecular shape. IR spectroscopy is used to confirm the model.     

3,4-Dialkoxybenzoyl substituted derivatives of hexahydro-1,3,5-triazine with hexagonal columnar mesophases

The synthesis of a homologous series of amidic derivatives of azacyclic compounds, i.e. 3,4-dialkoxybenzoyl ('two chain') N',N',N'-substituted hexahydro-1,3,5-triazines with alkoxy chains-OCnH2n+1 having n = 5, 6, 8-14 and 16 carbon atoms, and of one corresponding amine derivative, i.e. 1,3,5-tris(3,4-didecyloxybenzyl)hexahydro-1,3,5-triazine, is described. The thermal behaviour of the compounds is characterized by means of polarizing microscopy and differential scanning calorimetry. The amide with n = 6 is a monotropic liquid crystalline material, whereas the amides with n = 8-14 and 16 exhibit enantiotropic mesomorphism. The amine derivative with n = 10 is not a thermotropic liquid crystalline compound. The optical textures of the mesogenic compounds are spherulitic. X-ray diffraction measurements for the amides with n = 8, 10, 12, 13 and 16 show evidence of a hexagonal columnar structure (Colh) in the mesophase. The lattice constants of the mesophase are compared with the values from CPK models.     

Temperature-dependent solvation dynamics of water in sodium bis(2-ethylhexyl)sulfosuccinate/isooctane reverse micelles

In this paper, for the first time, we report a detailed study of the temperature-dependent solvation dynamics of a probe fluorophore, coumarin-500, in AOT/isooctane reverse micelles (RMs) with varying degrees of hydration (w0) of 5, 10, and 20 at four different temperatures, 293, 313, 328, and 343 K. The average solvation time constant becomes faster with the increase in w0 values at a particular temperature. The solvation dynamics of a RM with a fixed w0 value also becomes faster with the increase in temperature. The observed temperature-induced faster solvation dynamics is associated with a transition of bound- to free-type water molecules, and the corresponding activation energy value for the w0 = 5 system has been found to be 3.4 kcal mol-1, whereas for the latter two systems, it is approximately 5 kcal mol-1. Dynamic light scattering measurements indicate an insignificant change in size with temperature for RMs with w0 = 5 and 10, whereas for a w0 = 20 system, the hydrodynamic diameter increases with temperature. Time-resolved fluorescence anisotropy studies reveal a decrease in the rotational restriction on the probe with increasing temperature for all systems. Wobbling-in-cone analysis of the anisotropy data also supports this finding.     

Solubilization of food bioactives within lyotropic liquid crystalline mesophases

Liquid crystals are widely utilized as model systems to mimic biological processes where the phase behavior of lipids plays a mediating role. In various foods and pharmaceutical and biotechnical applications, the liquid crystalline phases formed by surfactants in an aqueous medium represent useful host systems for drugs, amino acids, peptides, proteins and vitamins.Various biologically active food additives are soluble in neither aqueous nor oil phase and require environmental protection against hydrolysis or oxidation. Lyotropic liquid crystals meet these requirements mainly due to their high solubilization capacities for hydrophilic, lipophilic and amphiphilic guest molecules. Moreover, recent studies demonstrated controlled and/or sustained release of solubilized molecules from different liquid crystalline matrices.This paper surveys the solubilization of hydrophilic, lipophilic and amphiphilic guest molecules for food applications and illustrates the corresponding structural transformations. Recent developments in liquid crystal characterization methods are discussed.     

Self-assembly of ternary cubic, hexagonal, and lamellar mesophases using the lattice-Boltzmann kinetic method

We use a kinetic lattice-Boltzmann method to simulate the self-assembly of the cubic primitive (P), diamond (D), and gyroid (G) mesophases from an initial quench composed of oil, water, and amphiphilic particles. Here, we also report the self-assembly of the noncubic hexagonal phase and two lamellar phases, one with periodic convolutions. The periodic mesophase structures are emergent from the underlying conservation laws and quasi-molecular interactions of the lattice-Boltzmann model. We locate regions of the model's parameter space where the sequence of appearance of mesophases lamellar --> primitive --> hexagonal is in agreement with pressure jump experiments and the sequence cubic --> lamellar is in agreement with compositional variations reported in the literature. The ability of our lattice-Boltzmann model to simulate self-assembly of cubic and noncubic phases in a unified and consistent manner opens the way for further investigations into the transition pathways and kinetics of the phase transitions between these states as well as of the rheology of these phases.     

NiCe bimetallic nanoparticles embedded in hexagonal mesoporous silica (HMS) for reverse water gas shift reaction

Reverse water gas shift (RWGS) reaction is a crucial process in CO₂ utilization. Herein, Ni- and NiCe-containing hexagonal mesoporous silica (Ni-HMS and NiCe-HMS) catalysts were synthesized using an in-situ one-pot method and applied for RWGS reaction. At certain reaction temperatures 500-750 °C, Ni-HMS samples displayed a higher selectivity to the preferable CO than that of conventionally impregnated Ni/HMS catalyst. This could be originated from the smaller NiO nanoparticles over Ni-HMS catalyst. NiCe-HMS exhibited higher activity compared to Ni-HMS. The catalysts were characterized by means of TEM, XPS, XRD, H₂-TPR, CO₂-TPD, EPR and N₂ adsorption-desortion technology. It was found that introduction of Ce created high concentration of oxygen vacancies, served as the active site for activating CO₂. Also, this work analyzed the effect of the H₂/CO₂ molar ratio on the best NiCe-HMS. When reaction gas H₂/CO₂ molar ratio was 4 significantly decreased the selectivity to CO at low temperature, but triggered a higher CO₂ conversion which is close to the equilibrium.     

Temperature-dependent phase behavior of polyelectrolyte-mixed micelle systems

The effect of temperature on the phase behavior of a polycation-anionic/nonionic mixed micelle system, poly(dimethyldiallylammonium chloride)-sodium dodecylsulfate/Triton X-100, was studied over a wide range of surfactant compositions, ionic strengths, and polycation molecular weights using turbidimetry and dynamic light scattering. Soluble complexes become biphasic upon heating through either liquid-liquid (coacervation) or liquid-solid (precipitation) separation. The biphasic boundary comprises two regions: a coacervate domain exhibiting a lower critical solution temperature and a second superimposed domain in which either solids or very dense and viscous fluids are formed upon heating. The position of the first region is symmetrically centered around conditions corresponding to charge neutralization of complexes and their aggregates at incipient phase separation. The second region, observed at high micelle charge, corresponds to the collapse of polycation onto micelle surfaces and expulsion of counterions and can produce either dense coacervate or precipitate. The two regions exhibit different dependences on ionic strength, polyelectrolyte molecular weight, and concentration, from which inferences about the mechanisms of phase separation may be drawn. Preliminary observations of the dense liquid phases isolated after coacervation disclose a number of interesting optical and rheological properties, possibly arising from shear-induced phase separation.     

Electron beam irradiation of poly(vinyl methyl ether) films. 2. Temperature-dependent swelling behavior

Temperature-sensitive hydrogel films were synthesized by electron beam irradiation of poly(vinyl methyl ether) (PVME) on silicon (Si/SiO(2)) substrates and gold (Au) coated glass slides. The temperature-dependent swelling behavior of the films in aqueous solution was characterized by in situ spectroscopic ellipsometry and a combination of surface plasmon resonance (SPR) and optical waveguide spectroscopy (OWS). The results of both techniques are compared. The suitability of both techniques for the characterization of the swelling behavior of thin hydrogel films is demonstrated. The volume swelling degree in the swollen state decreases with increasing radiation dose D. This is explained by the fact that the number of formed polymeric radicals, and hence cross-linking density, increases with D. Above the phase-transition temperature, the swelling degrees were independent of D, slightly above 1. The swelling/deswelling process was fully reversible and is mainly directed perpendicular to the substrate surface. The phase-transition temperature was determined to be T(cr) approximately 33 degrees C. However, T(cr) slightly decreases with increasing D and increasing film thickness d.     

CrSi(2) hexagonal nanowebs

Single-crystalline CrSi(2) nanostructures with a unique hexagonal nanoweb morphology have been successfully synthesized for the first time. These nanowebs span 150-200 nm and are composed of <112?0> nanowire segments with a thickness of 10-30 nm. It is proposed that surface charges on the {101?0} sidewalls and the minimization of electrostatic energy induce the nanoweb formation. Calculations of the electrostatic energies were used to predict the transitions between different modes of bending, which agreed well with the experimental observations.     

Modeling of structures of poly(oxyhexaorganocyclotetrasiloxy-2,6-diyl) mesophases

The idealized liquid-crystal structures of two cyclolinear organosilicon polymers, viz., poly(oxyhexaorganocyclotetrasiloxy-2,6-diyls), where the alkyl substituent is Et (1b) or Pr (1c), were modeled. The columns of monomer units in polymers have different conformations, viz., a distorted long boat in 1b and a distorted long chair in 1c. Both polymers have columnar structures with the most probable antiparallel arrangement of the columns.     

Self-assembly approach toward magnetic silica-type nanoparticles of different shapes from reverse block copolymer mesophases

In the present study poly(isoprene-block-ethylene oxide), PI-b-PEO, block copolymers are used to structure iron oxide and silica precursors into reverse mesophases, which upon dissolution of the organic matrix lead to well-defined nanoparticles of spheres, cylinders, and plates based on the original structure of the mesophase prepared. The hybrid mesophases with sphere, cylinder, and lamellar morphologies containing the inorganic components in the minority phases are characterized through a combination of small-angle X-ray scattering (SAXS), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), and electron energy loss spectroscopy (EELS). After heat treatments the respective nanoparticles on mica surfaces are characterized by scanning force microscopy (SFM). X-ray diffraction (XRD) and superconducting quantum interference device (SQUID) magnetometer measurements are performed to demonstrate that the heat treatment leads to the formation of a magnetic gamma-Fe2O3 crystalline phase within the amorphous aluminosilicate. The results pave the way to functional, i.e., magnetic nanoparticles where the size, shape, and iron oxide concentration can be controlled opening a range of possible applications.     

From the microscopic to the mesoscopic properties of lyotropic reverse hexagonal liquid crystals

In the present study we aimed to explore a correlation between the microstructural properties of the lyotropic reverse hexagonal phase (HII) of the GMO/tricaprylin/phosphatidylcholine/water system and its mesoscopic structure. The mesoscopic organization of discontinuous and anisotropic domains was examined, in the native state, using environmental scanning electron microscopy. The topography of the HII mesophases was imaged directly in their hydrated state, as a function of aqueous-phase concentration and composition, when a proline amino acid was solubilized into the systems as a kosmotropic (water-structure maker) guest molecule. The domain structures of several dozen micrometers in size, visualized in the environmental scanning electron microscopy, were found to possess fractal characteristics, indicating a discontinuous and disordered alignment of the corresponding internal water rods on the mesoscale. On the microstructural level, SAXS measurements revealed that as water content (Cw) increases the characteristic lattice parameter of the mesophases increases as well. Using the water concentration as the mass measure of the mixtures, a scaling relationship between the lattice parameter and the concentration was found to obey a power law whereby the derived fractal dimension was the relevant exponent, confirming the causal link between the microscopic and mesoscopic organizations. The topography of the HII mesophase was found to be affected by the microstructural parameters and the composition of the samples. Thermal analysis experiments involving these systems further confirmed that the behavior of water underpins both microscopical and mesoscopic features of the systems. It was shown that both the swelling of the lattice parameter and the mesoscopic domains is correlated to the bulk water concentration in the water rods.