Facile assembly of mesoporous silica nanoparticles with hierarchical pore structure for CO2 capture

In the work, we propose an efficient one-pot approach for synthesis of a new type of mesoporous silica nanoparticles (MSNs). That can be successfully realized by using tetraethylorthosilicate (TEOS) and N-[3-(trimethoxysilyl)propyl]ethylenediamine (TSD) as the silica precursors and cetyltrimethylammonium bromide (CTAB) as the structure-directing agent through a facile assembly process. The as-synthesized MSNs possess a spherical morphology with about 230 nm, a relatively high surface area of 133 m²/g, and a hierarchical pore size distribution. When applied as the sorbents, the amine-functioned MSNs demonstrate the enhanced adsorption capacity for CO₂ capture (at 1 bar, 15 vol% CO₂, up to 80.5 mg/g at 75 °C), high selectivity, and good cycling durability, benefiting from the suitable modification of polyethyleneimine.     

Synthesis of novel mesoporous silica spheres with starburst pore canal structure

Novel spherical mesoporous silica materials with uniform diameters and starburst mesopore structures were synthesized by a simple one-step procedure with ethanol as the co-solvent in dilute aqueous solution and their formation mechanism was proposed. The arrangement of the pore canal and the diameter of the sphere could be tailored by altering the concentration of ethanol.     

Facile one-pot synthesis of PEGylated monodisperse mesoporous silica nanoparticles with controllable particle sizes

In this work, we describe the one-pot synthesis of PEGylated mesoporous silica nanoparticles （MSNs） with uniform shape, tunable sizes, and narrow size distributions. The size of these nanoparticles can be controlled from 49 nm to 98 nm by simply varying the concentration oftriethanolamine during the base- catalyzed sol-gel reaction. Particles were characterized by transmission electron microscopy, dynamic light scattering, Fourier transform infrared spectrometry, thermogravimetric analysis, and nitrogen adsorption-desorption measurements. These PEGylated MSNs exhibited excellent long-term stability in biological media, which ensures their potential applications in drug delivery.     

Sequestration of CO2 using Cu nanoparticles supported on spherical and rod-shape mesoporous silica

The CO₂ sequestration is one of the most promising solutions to tackle global warming. In this study, spherical mesoporous silica particles (MPS-S) and rod-shaped mesoporous silica particles (MPS-R) loaded with Cu nanoparticles were selectively prepared and employed for CO₂ adsorption. For the first time uniform Cu nanoparticles were incorporated into the rod-shaped mesoporous silica particles by post-synthesis modification using both N-[3-(trimethoxysilyl)propyl]ethylenediamine (PEDA) and ethylenediamine (EDA) as coupling agents. The physiochemical properties of the mesoporous and copper grifted silica composites were investigated by CHN elemental analysis, FTIR spectroscopy, thermogravimetric analysis, X-ray diffraction, energy dispersive X-ray spectroscopy (EDX), surface area analysis, scanning, transmission electron microscopy and gas analysis system (GSD 320, TERMO). The mesoporous silica shows highly ordered mesoporous structures, with the rod-shaped particles having a higher surface area than the spherical ones. Copper nanoparticles with an average diameter of 6.0 nm were uniformly incorporated into the MPS-S and MPS-R. Moreover, Cu-loaded mesoporous silica exhibits up to 40% higher CO₂ adsorption capacity than the bare MPS. The MPS-R modified with Cu nanoparticles showed a maximum CO₂ adsorption capacity of 0.62 mmol/g and the humidity showed a slight negative effect on CO₂ uptake process. The enhancement of CO₂ adsorption onto transition metal/mesoporous substrates provides basis for imminent CO₂ sequestration.     

Synthesis of hierarchical sieve-like mesoporous silica nanoparticle aggregates via centrifugal method for drug delivery system

A facile approach towards the scaled-up synthesis of a novel hierarchical sieve-like structure of mesoporous silica nanoparticle aggregates (hsMSNA) with high drug encapsulation efficiency and sustained release behaviors acting as a drug delivery system in the field of nanomedicine.     

Preparation of mesoporous silica nanoparticle with tunable pore diameters for encapsulating and slowly releasing eugenol

Fragrances are frequently added to a variety of products, including food, cosmetics and health products. However, the high volatility and instability of essence limit its application in some fields. In this study, mesoporous silica nanoparticles (MSNs) were prepared to encapsulate eugenol, which could reduce the volatilization of the fragrance molecules. A facile approach was presented to synthesize MSNs with three different pore diameters for encapsulating eugenol. In addition, the properties of MSNs including mean particle size, morphology, encapsulating efficiency and release tendency were characterized. Results showed that the larger the pore diameters of MSNs, the more aromatic molecules were adsorbed. Furthermore, the release mechanism was described as the smaller the pore diameters of MSNs, the slower the release of eugenol.     

Efficient 3-aminopropyltrimethoxysilane functionalised mesoporous ceria nanoparticles for CO2 capture

This work described the effect of 3-aminopropyltrimethoxysilane (APTMS) functionalization on the mesoporous ceria nanoparticles (MCNs) toward CO₂ capture. The MCN and APTMS-loaded MCN (APTMS-MCN) were prepared by the sol-gel and impregnation method, respectively. The functionalization of APTMS on the MCN enhanced the CO₂ binding sites which were observed through the formation of carbamate species from the interaction of CO₂ with the NH group. This resulted to the increase of CO₂ adsorption capacity of APTMS-MCN with 10-fold higher than that of pristine MCNs. For MCNs, CO₂ may be adsorbed onto oxygen basic, oxygen vacant, and hydroxyl sites which further formed polydentate, monodentate, bidentate, and hydrogen carbonate species. In addition to these carbonate species, the adsorption of CO₂ on APTMS-MCN has largely occurred through the formation of carbamate species which further enhanced its CO₂ uptake.     

P(VPBA-DMAEA) as a pH-sensitive nanovalve for mesoporous silica nanoparticles based controlled release

A pH-sensitive controlled release system was proposed in this work, which consists of mesoporous silica nanoparticles(MSNs) functionalized on the pore outlets with poly(4-vinylphenybronic acid-co-2-(dimethylamino)ethyl acrylate) [P(VPBA-DMAEA)]. Four kinds of P(VPBA-DMAEA)-gated MSNs were synthesized and applied for the p H-sensitive controlled release. The results showed that P(VPBADMAEA) can work as a p H-sensitive nanovalve. The release behavior of the hybrid nanoparticles could be adjusted by changing the mole ratio of VPBA and DMAEA. With the increasing of the mole ratio of VPBA,the leakage of the entrapped molecules in the pores of MSNs could be decreased at neutral and alkaline conditions. By altering the p H of buffer from 4.0 to 8.0, the valve could be switched ‘‘on' and ‘‘off'reversibly. In addition, cells viability results indicated that these P(VPBA-DMAEA)-gated MSNs had good biocompatibility. We believe that these MSNs based p H-sensitive controlled release system will provide a promising nanodevice for sited release of drug delivery.     

Efficient CO2 capture on low-cost silica gel modified by polyethyleneimine

In this work,a series of polyethyleneimine(PEI) functionalized commercial silica gel were prepared by wet impregnation method and used as CO 2 sorbent.The as-prepared sorbents were characterized by N 2 adsorption,FT-IR and SEM techniques.CO 2 capture was tested in a fixed bed reactor using a simulated flue gas containing 15.1% CO 2 in a temperature range of 25-100 C.The effects of sorption temperature and amine content on CO 2 uptake of the adsorbents were investigated.The silica gel with a 30 wt% PEI loading manifested the largest CO 2 uptake of 93.4 mg CO 2 /g adsorbent(equal to 311.3 mg CO 2 /g PEI) among the tested sorbents under the conditions of 15.1%(v/v) CO 2 in N 2 at 75 C and atmospheric pressure.Moreover,it was rather low-cost.In addition,the PEI-impregnated silica gel exhibited stable adsorption-desorption behavior during 5 consecutive test cycles.These results suggest that the PEI-impregnated silica gel is a promising and cost-effective sorbent for CO 2 capture from flue gas and other stationary sources with low CO 2 concentration.     

Microwave-induced synthesis of highly dispersed gold nanoparticles within the pore channels of mesoporous silica

Highly dispersed gold nanoparticles have been incorporated into the pore channels of SBA-15 mesoporous silica through a newly developed strategy assisted by microwave radiation (MR). The sizes of gold are effectively controlled attributed to the rapid and homogeneous nucleation, simultaneous propagation and termination of gold precursor by MR. Diol moieties with high dielectric and dielectric loss constants, and hence a high microwave activation, were firstly introduced to the pore channels of SBA-15 by a simple addition reaction between amino group and glycidiol and subsequently served as the reduction centers for gold nanoparticles. Extraction of the entrapped gold from the nanocomposite resulted in milligram quantities of gold nanoparticles with low dispersity. The successful assembly process of diol groups and formation of gold nanoparticles were monitored and tracked by solid-state NMR and UV-vis measurements. Characterization by small angle X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicated that the incorporation of gold nanoparticles would not breakup the structural integrity and long-range periodicity of SBA-15. The gold nanoparticles had a narrow size distribution with diameters in the size range of 5-10 nm through TEM observation. The average particles size is 7.9 nm via calculation by the Scherrer formula and TEM measurements. Nitrogen adsorption and desorption isotherms gave further evidence that the employed method was efficient and gold nanoparticles were successfully incorporated into the pore channels of SBA-15.     

Adsorption of cesium using mesoporous silica gel evenly doped by Prussian blue nanoparticles

In this paper, a novel mesoporous silica gel evenly doped by Prussian blue nanoparticles (PBMSG) was successfully synthesized by using N,N-dimethylamide as template with a large Barrett-Emmett-Teller (BET) surface area of 505 m²/g and an average pore size of 2.9 nm. The static adsorption experiments showed that the equilibration time of PBMSG for Cs⁺ was about 30 min. The adsorption isotherm of PBMSG for Cs⁺ accorded with Langmuir model and the theoretical maximum adsorption capacity was 80.0 ± 2.9 mg/g. When the initial concentration of Cs⁺ was 1.00 mg/L, the adsorption partition coefficient K_d could reach 3.5 × 10⁴ mL/g After adsorption, Cs⁺ could be eluted by dilute hydrochloric acid (pH 2) with an efficiency of 89.8%, while no K⁺, Fe³⁺, Fe²⁺ was eluted. PBMSG exhibited good selectivity toward Cs⁺ and Rb⁺. In the presence of high concentration of K⁺, the selective adsorption of PBMSG could change the mass ratio of K⁺, Rb⁺ and Cs⁺ from 96.63:0.83:1.00–1.12:0.73:1.00. The separation of Cs⁺ and Rb⁺ from K⁺ with similar concentration (100 mg/g) was realized by column experiment. This indicated that PBMSG was suitable for rapid recovery of low concentration of rubidium and cesium from complex matrixes, such as wastewater and salt lake brine, etc.     

Synthesis of hollow spherical silica with MCM-41 mesoporous structure

Hollow spherical mesoporous silica was synthesized by using sodium silicate as a precursor and a low concentration of cetyltrimethylammonium bromide (CTAB) (0.154 mol dm^–3). The resulting hollow spherical particles were characterized with scanning electron microcopy (SEM), small-angle X-ray diffraction (SXRD), transmission electron microscopy (TEM), and N₂ gas adsorption and desorption techniques. The results showed that regular spherical mesoporous silica could be obtained only if the molar ratio of propanol to CTAB was in the range of approximately 8:1–9:1. The spherical particles were hollow (inside), and the shell consisted of smaller particles with a pore structure of hexagonal symmetry. With an increase of the molar ratio of propanol to CTAB, the distance (a value) between centers of two adjacent pores increased, and the pore structure of mesoporous silica became less ordered. N₂ adsorption–desorption curves revealed type IV isotherms and H1 hysteresis loops; with an increase of the molar ratio of propanol to CTAB, the pore size with Barrett–Joyner–Halenda (BJH) diameter of the most probable distribution decreased, but the half peak width of the pore size distribution peak increased     

Catalytic application of sulfonic acid functionalized mesoporous benzene–silica with crystal-like pore wall structure in esterification

The first catalytic applications of sulfonic acid-functionalized hydrophobic mesoporous benzene–silica with lamellar pore wall structure are reported. The mesoporous benzene–silica attached with propylsulfonic groups to the crystal-like periodic pore walls exhibited the catalytic activity in the esterification of acetic acid with ethanol. The catalytic results show the higher conversion compared to the commercial Nafion-H.     

Functionalized mesoporous silica nanoparticles templated by pyridinium ionic liquid for hydrophilic and hydrophobic drug release application

Chemotherapy is the most common treatment for all cancer patients but this treatment poses many side effects due to lack of drug’s selectivity. To overcome this problem, utilizing a better and more effective delivery agent is the solution. Mesoporous silica nanoparticles (MSNs) emerged as a promising platform in development of drug delivery agent. This is due to its desirable properties such as tunable pores, large surface area, good biocompatibility and easy functionalization. Furthermore, these properties can be tuned through the utilization of alternative template such as pyridinium ionic liquid. Besides, by employing surface functionalization, the effectiveness of MSNs as drug delivery agent may also increase. This work reported the usage of 1-hexadecylpyridinium bromide ionic liquid as template for MSNs production and the surface of MSNs was then further functionalized via post – grafting method in order to obtain MSN – NH₂, MSN – SH and MSN – COOH as drug carrier, respectively. These functionalized MSNs were then used to study the drug loading and drug release of hydrophilic drug, gemcitabine and hydrophobic drug, quercetin. For quercetin, MSN-NH₂ had the highest drug loading percentage (72%) and slowest release (14%) in 48 h while for gemcitabine, it was found that MSN-COOH had the highest drug loading percentage (45%) and slowest release (15%) in 48 h. Based on the results, it is suggested that mesoporous silica nanoparticle with surface functionalization has suitable properties for controlled drug release which gives constant release behavior over a period of time to avoid repeated administration of drug where the drug is administered at a fixed dosage and regular time interval.     

四乙烯五胺修饰介孔硅胶吸附CO2性能的研究

采用浸渍法将四乙烯五胺(TEPA)负载到介孔硅胶(SG)上,制备了一系列胺功能化的CO₂吸附材料(TEPA-SG).利用傅里叶变换红外光谱(FT-IR)、热重分析(TGA)和N₂吸脱附等分析方法对样品进行了表征,并在固定床反应器中考察了TEPA负载量、吸附温度对CO₂吸附性能的影响,同时通过添加不同质量分数的聚乙二醇(PEG)考察了羟基对吸附性能及再生性能的促进作用.结果表明,当TEPA负载量为40%(质量分数)、吸附温度为70 ℃时,TEPA-SG的吸附量高达2.21 mmol/g;PEG的加入改变了氨基与CO₂的相互作用机理,当TEPA与PEG的质量比为3:1,总负载量为40%时,CO₂的吸附量为2.70 mmol/g,且经过10次吸脱附循环实验后,CO₂吸附量仍保持在2.66 mmol/g,表现出较好的循环稳定性.Clausius-Clapeyron方程计算得该过程的等量吸附热为30~40 kJ/mol,且随吸附量的增大等量吸附热逐渐减小,表明TEPA30/PEG10-SG吸附剂表面存在能量不均匀性.     

Lipid,protein and poly(NIPAM) coated mesoporous silica nanoparticles for biomedical applications

In the past decade, mesoporous silica nanoparticles (MSNs) as nanocarriers have showed much potential in advanced nanomaterials due to their large surface area and pore volume. Especially, more and more MSNs based nanodevices have been designed as efficient drug delivery systems (DDSs) or biosensors. In this paper, lipid, protein and poly(NIPAM) coated MSNs are reviewed from the preparation, properties and their potential application. We also introduce the preparative methods including physical adsorption, covalent binding and self-assembly on the MSNs' surfaces. Furthermore, the interaction between the aimed cells and these molecular modified MSNs is discussed. We also demonstrate their typical applications, such as photodynamic therapy, bioimaging, controlled release and selective recognition in biomedical field.     

Dual pH and glucose sensitive gel gated mesoporous silica nanoparticles for drug delivery

A low-molecular-weight gel with dual pH and glucose sensitivity was designed as the gate controller for mesoporous silica nanoparticles (MSNs) to fabricate a smart drug delivery system. The smart gel caped MSNs could control the antidiabetic drug release via the detection of glucose and pH levels.     

Characterization of gold nanoparticles electrochemically deposited on amine-functioned mesoporous silica films and electrocatalytic oxidation of glucose

This study reports the preparation and characterization of gold nanoparticles deposited on amine-functioned hexagonal mesoporous silica (NH₂–HSM) films and the electrocatalytic oxidation of glucose. Gold nanoparticles are fabricated by electrochemically reducing chloroauric acid on the surface of NH₂–HSM film, using potential step technology. The gold nanoparticles deposited have an average diameter of 80 nm and show high electroactivity. Prussian blue film can form easily on them while cycling the potential between −0.2 and 0.6 V (vs saturated calomel electrode) in single ferricyanide solution. The gold nanoparticles loading NH₂–HSM-film-coated glassy carbon electrode (Au–NH₂–HSM/GCE) shows strong catalysis to the oxidation of glucose, and according to the cathodic oxidation peak at about 0.16 V, the catalytic current is about 2.5 μA mM⁻¹. Under optimized conditions, the peak current of the cathodic oxidation peak is linear to the concentration of glucose in the range of 0.2 to 70 mM. The detection limit is estimated to be 0.1 mM. In addition, some electrochemical parameters about glucose oxidation are estimated.     

Organization of helical mesoporous silica nanotubes

Mesoporous silica nanotubes with coiled pore channels in the walls were prepared using the self-assemblies of a gelator as template previously. The TEM images were simulated using Autodesk 3D studio MAX 9.0 here. These hierarchical nanotubes were organized into μm-size balls by increasing the concentration of gelator and controlling stirring speed. Bimodal pore structure was identified by a N₂ adsorption method.     

Facile synthesis of mesoporous silica sublayer with hierarchical pore structure on ceramic membrane using anionic polyelectrolyte

A facile method for introducing mesoporous silica sublayer onto the surface of a ceramic membrane for use in liquid-phase separation is described. To reduce the electrostatic repulsion between the mesoporous silica sol and the ceramic membrane in highly acidic conditions (pH < 2), thus facilitating the approach of hydrolyzed silica sol to the surface of the membrane, poly(sodium 4-styrenesulfonate) (Na+PSS-, denoted as PSS-) was used as an ionic linker. The use of PSS- led to a significant reduction in positive charge on the ceramic membrane, as confirmed by experimental titration data. Consistent with the titration results, the amount of mesoporous silica particles on the surface of the ceramic membrane was low, in the absence of PSS- treatment, whereas mesoporous silica sublayer with hierarchical pore structure was produced, when 1 wt % PSS- was used. The results show that mesoporous silica grows in the confined surface, eventually forming a multistacked surface architecture. The mesoporous silica sublayer contained uniform, ordered (P6 mm) mesopores of ca. 7.5 nm from mesoporous silica as well as macropores ( approximately mum) from interparticle voids, as evidenced by transmission electron microscopy and scanning electron microscopy analyses. The morphologies of the supported mesoporous silica could be manipulated, thus permitting the generation of uniform needlelike forms or uniform spheroid particles by varying the concentration of PSS-.