Synthesis of dithienothiophenes,cyclopentadithiophene and silacyclopentadithiophenes using palladium-catalyzed cyclization

The intramolecular cyclization of bromothiophene derivatives with hexamethylditin in the presence of tetrakis(triphenylphosphine)palladium(0) gave dithienothiophenes, cyclopentadithiophene, and silacyclopentadithiophenes in moderate to good yields.     

Synthesis, solid state structure and spectro-electrochemistry of ferrocene-ethynyl phosphine and phosphine oxide transition metal complexes

The synthesis of ferrocene-ethynyl phosphine platinum dichloride complexes based on (FcCC)_nPh_3−nP (1a, n = 1; 1b, n = 2; 1c, n = 3; Fc = ferrocenyl, (η⁵-C₅H₅)(η⁵-C₅H₄)Fe) is described. Air-oxidation of 1c afforded (FcCC)₃PO (6). Treatment of 1a-1c with [(PhCN)₂PtCl₂] (2) or [(tht)AuCl] (tht = tetrahydrothiophene) (7), respectively, gave the heterometallic transition complexes cis-[((FcCC)_nPh_3−nP)₂PtCl₂] (3a, n = 1; 3b, n = 2; 3c, n = 3) or [((FcCC)_nPPh_3−n)AuCl] (8a, n = 1; 8b, n = 2). Further treatment of these molecules with HCCMc (4a, Mc = Fc; 4b, Mc = Rc = (η⁵-C₅H₅)(η⁵-C₅H₄)Ru) in the presence of [CuI] produced trans-[((FcCC)Ph₂P)₂Pt(CCFc)₂] (5) (reaction of 3a with 4a) and [(FcCC)_nPh_3−nPAuCCMc] (n = 1: 9a, Mc = Fc; 9b, Mc = Rc; n = 2: 11a, Mc = Fc; 11b, Mc = Rc) (reaction of 4a, 4b with 8a, 8b), respectively.The structures of 3a, 5, 6, 8, 9a, and 9b in the solid state were established by single-crystal X-ray structure analysis. The main characteristic features of these molecules are the linear phosphorus-gold-acetylide arrangements, the tetra-coordination at phosphorus and the square-planar surrounding at platinum.The electrochemical and spectro-electrochemical behavior of complexes 5, 8a, 9a, 9b and [(Ph₃P)AuCCFc] was investigated in the UV/Vis/NIR. Near IR bands that are likely associated with charge transfer from the ((FcCC)Ph₂P)₂Pt or the ((FcCC)_nPh_3−nP)Au (n = 0, 1) moieties appear upon oxidation of the σ-bonded ferrocene-ethynyl groups. These bands undergo a (stepwise) blue shift as ferrocene-ethynyl substituents on the phosphine coligands are oxidized.     

Topochemical polymerisation of assembled diacetylene macrocycle bearing dibenzylphosphine oxide in solid state

Novel diacetylene macrocycles 1 and 2 bearing dibenzylphosphine oxide were synthesised via Eglinton acetylenic intramolecular coupling. The X-ray analysis of crystals of macrocycles 1 and 2 demonstrated that the better-aligned tubular supramolecular structure was formed in macrocycle 1 than in macrocycle 2, which provided the possibility of diacetylene topochemical polymerisation in solid state of macrocycle 1. UV–vis, Raman spectroscopy and X-ray analysis indicated that the crystals of macrocycle 1 could undergo topochemical diacetylene polymerisation only on their surface by light irradiation; differential scanning calorimetry, solid-state ¹³C NMR spectroscopy and solubility test demonstrated that the crystals of macrocycle 1 could undergo diacetylene topochemical polymerisation inside solid by heat. As expected, based on the topological analysis of crystal structure, the crystals of macrocycle 2 could not undergo diacetylene topochemical polymerisation either by light irradiation or heat.     

一种具有Keggin结构的固体杂多酸的合成及其晶体结构

以钨酸钠、氯化钴、醋酸钴及1,3-丙二胺为原料,利用水热合成法制备了一种具有Keggin结构的杂多酸H6[CoW12O40].2.5H2O;利用单晶X射线衍射分析了产物的晶体结构.结果表明,产物中的过渡金属Co2+离子作为中心原子与4个氧原子形成CoO4四面体;CoO4四面体被4个W3O13金属簇包围,与每个W3O13金属簇之间通过共顶点连接而形成[CoW12O40]6-阴离子;六个氢离子作为抗衡阳离子,最终形成固体杂多酸分子.     

Synthesis,structure and solid state NMR analysis of a new templated titanium(III/IV) fluorophosphate

The title compound MIL-131 (MIL stands for Material from Institut Lavoisier) was prepared hydrothermally (4 days, 473 K, autogenous pressure) in the presence of an organic base (N((CH₂)₂NH₂)₃). The structure of MIL-131 or Ti^IIITi^IV(OH)F₄(HPO₄)·(PO₄)·(N((CH₂)₂NH₃)₃) has been determined ab initio from X-Ray synchrotron powder diffraction data using simulated annealing methods and was refined in the triclinic space group P-1 (no. 2). MIL-131 exhibits a one-dimensional structure built up from inorganic chains of corner sharing TiO₅(OH) titanium(III) octahedra and PO₄ and HPO₄ phosphate tetrahedra, related to TiO₂F₄ titanium octahedra. Protonated triamine cations are located between the inorganic motifs, and interact strongly with the mineral network through hydrogen bondings both with terminal fluorine atoms and hydroxo or oxo groups. Multinuclear solid state NMR has allowed a clear attribution of the protons, fluoride, and phosphate groups environment within the framework of MIL-131. The large values of chemical shift anisotropy together with the absence of any ¹³C NMR response confirmed the presence of paramagnetic titanium(III) species deduced from the crystal structure. Finally, 2D MAS ¹H-³¹P CP-HETCOR NMR correlation experiment gives some insight on the nature of the intra-framework hydrogen bonding.Crystal data for MIL-131: a = 14.109(1) Å, b = 8.462(3) Å, c = 7.179(1) Å, α = 93.772(1)°, β = 96.566(2)°, γ = 98.004(1)°, V = 840.36(2) ų, z = 2.     

Octahedral rhenium(III) chalcocyanide cluster anions: Synthesis, structure, and solid state design

The review summarizes data on synthesis and structure of rhenium chalcocyanide cluster onions [ Re₆X₈(CN)₆]^4-f (X = S, Se, Te) belonging to a new class of inorganic compounds. Two main groups of such compounds are considered: salts with an island structure and polymer compounds. Various factors governing the type of structure and the dimensionality of the polymer compounds are analyzed, including the nature of the chalcogen atom in the cluster anion, preferable coordination of the transition metal cation, and the size of additional charge-compensating cations. Crystal-chemical approaches to design of complex salts based on octahedral rhenium chalcocyanide cluster anions are formulated. Translated fromZhurnal Strukturnoi Khimii, Vol. 41, No. 3, pp. 609-638, May–June, 2000.     

Synthesis and solid state structure of fluorous probe molecules for fluorous separation applications

A series of colored hydrocarbon and fluorocarbon tagged 1-fluoro-4-alkylamino-anthraquinones and 1,4-bis-alkylamino-anthraquinone probe molecules were synthesized from a (fluorinated) alkyl amine and 1,4-difluoroanthraquinone to aid in the development of fluorous separation applications. The anthraquinones displayed stacking of the anthraquinone tricycle and interdigitation of the (fluorinated) alkyl chains in the solid state. Furthermore, intramolecular N-H?O hydrogen bonds forced the hydrocarbon and fluorocarbon tags into a conformation pointing away from the anthraquinone tricycle, with the angle of the tricycle plane normal and the main (fluorinated) alkyl vector ranging from 1° to 39°. Separation of the probe molecules on fluorous silica gel showed that the degree of fluorination of the probe molecules plays only a minor role with most eluents (e.g., hexane/ethyl acetate and methyl nonafluorobutyl ethers/ethyl acetate). However, toluene as eluent caused a pronounced separation by degree of fluorination for fluorocarbon, but not hydrocarbon tagged probe molecules on both silica gel and fluorous silica gel. These studies suggest that hydrocarbon and fluorocarbon tagged anthraquinones are useful probe molecules for the development of laboratory scale fluorous separation applications.     

Synthesis, structure and thermal stability of fully hydrophobic porphyrin-DNA conjugates

The DNAs modified with tetraphenyl porphyrin at the center of 13mer oligonucleotide were synthesized using phosphoramidite chemistry and automated DNA synthesis. When the porphyrin modified oligonucleotide was annealed with its complementary strand, they formed a standard B-form duplex. The porphyrin moiety intercalated in the duplex, and moderately lowered the thermal stability.     

Synthesis, characterization and solar cell application of a D-A copolymer with cyclopentadithiophene and fluorene as donor units

In this paper, a new D-A copolymer, PFDBCPDT, which consists of benzo-2,1,3-thiadiazole as acceptor units and cyclopentadithiophene and fluorene as donor units, was synthesized. The thermal, electrochemical, photophysical and photovoltaic properties of PFDBCPDT were studied. PFDBCPDT showed a low optical band gap of 1.84 eV, and relatively low HOMO level of ?5.69 eV. The best device performance was obtained by PFDBCPDT/PC₆₁BM (1:3) with 0.5 vol% DIO. The device exhibited a power conversion efficiency of 3.06%, with a relatively high open circuit voltage of 0.87 eV.     

The crystal and molecular structure and solid state conformation of 2,2,4,4,6,6,-hexamethylcyclohexanetrione

The crystal and molecular structure of the title compound have been determined by X-ray methods. Crystals are monoclinic, space group P2₁/n with a= 6.076(2), b=14.927(3), c = 13.200(3) Å, β=96.71(5)⁰. The structure was solved by direct methods and refined by least-squares to a final R value of 0.05 using 1358 significant (I 1.5σ(I)) reflections out of a total 2095 measured. The molecule adopts a slightly distorted unsymmetric boat conformation, in between two (of three) degenerate perfect C₂ boat structures which it is proposed are intercon-vertible by a confonnational ripple of low energy.     

Synthesis, spectral and solid state characterization of a new bioactive hydrazine bridged cyclic diphosphonium compound

The facile preparation of a racemic hydrazine bridged diphosphonium compound possessing a ring system analogous to bicyclo[3.3.2]decane is reported. Although the reaction yield is low, the structure of the compound, which possesses an eight-membered ring, two phosphonium cationic centers, a biimino bridge, molecular chirality and two fused aromatic rings locked into roughly perpendicular planes is unusual. The compound displays substantial biological activity in the brine shrimp test and cleaves plasmid DNA.     

Synthesis and solid state characterization of two insoluble tetrathiometalates

The aqueous reaction of ammonium tetrathiometalates (NH₄)₂[MS₄] (M = Mo or W) with (dbtmen)Br₂ · 2H₂O (dbtmen = N,N′-dibenzyl-N,N,N ′, N′-tetramethylethylenediammonium dication) results in the formation of the highly insoluble compounds (dbtmen)[MoS₄] (1) and (dbtmen)[WS₄] (2) in near quantitative yields. Compounds (1) and (2) have been characterized by elemental analysis, spectroscopic methods, X-ray powder diffraction and TG–DTA. Both compounds exhibit nearly identical IR spectra and X-ray powder patterns. The compounds exhibit a single strong signal for the asymmetric M–S stretching vibration at 475 cm⁻¹ in (1) and at 457 cm⁻¹ in (2). Complex (2) is thermally more stable than the corresponding Mo analogue (1). Thermal decomposition products of (1) and (2) are carbon contaminated amorphous metal disulfides and are formulated as MoS_1.99C_2.06N_0.07 and WS_1.75C_3.02 based on elemental analysis of the residue.     

Synthesis of a pladienolide B analogue with the fully functionalized core structure

Starting from (R)-(-)-linalool (6), terminus differentiation and chain extension via aldol type reactions led to ketophosphonate 16 (C1-C8 building block). In a Horner-Wadsworth-Emmons reaction, 16 reacted with aldehyde 22, which contained the vicinal anti-Me-OH pattern and a vinyl iodide function, to provide the C1-C13 part of pladienolide B. After Shiina macrolactonization, reduction of the enone 26 gave the core structure 27. A Stille cross-coupling of vinyl iodide 27 with tributylphenylstannane eventually furnished analogue 30.     

The structure of pyrazoles in the solid state: a combined CPMAS, NMR, and crystallographic study

The structures of six N-unsubstituted pyrazoles, three already known and three newly synthesized, have been studied by a combination of X-ray crystallography, multinuclear NMR (solution and solid state), and density functional theory (DFT) calculations. In those cases where crystal structure and CPMAS NMR were available, the agreement was almost perfect, allowing a prediction of the tautomer (with certitude) and the tetrameric structure (with high probability) in the case of 5-isopropyl-3-phenyl-1H-pyrazole without knowing the X-ray structure. In the case of the 5-(2-benzylphenyl)-3-trifluoromethyl-1H-pyrazole above represented, the DFT calculations at the B3LYP/6-31G level justify the great stability of this tautomer by the presence of an intramolecular N-H...pi interaction, present in solution.     

Molecular structure of decamethylgermanocene in the solid state

The low temperature X-ray structure analysis of decamethylgermanocene reveals two independent molecules in the unit cell, both of which have a bent sandwich structure with angles between the planes of the two C₅Me₅ rings of 31.26(0.09)° and 31.55(0.10)°, respectively. The perpendicular germanium to ring distances are 220 pm, corresponding to Ge-C bond lengths ranging from 240 to 266 pm.     

The structure of glibenclamide in the solid state

The structure of glibenclamide, 5‐chloro‐N‐(2‐{4‐[(cyclohexylamino)carbonyl] aminosulfonyl}phenyl) ethyl)‐2‐methoxybenzamide, an important antidiabetic drug, has been studied both in solution and in the solid state by a combination of NMR spectroscopy and theoretical calculations. The possibility that glibenclamide suffers a tautomerization under melting to afford a desmotrope was rejected. Copyright © 2012 John Wiley & Sons, Ltd.     

Carbohydrazone polychelates: Synthesis,physicochemical characterization,solid state conductance and biological studies

The polychelates of Ti(III), VO(IV), Cr(III), Mn(III), Fe(III), Zr(IV), MoO₂(VI) and UO₂(VI) with the chelating hydrazone derived from 2,4-dihydroxy-5-acetylacetophenone and carbohydrazide have been synthesized. The polychelates have been characterized on the basis of elemental analyses, IR, magnetic moment, electronic spectral data and thermal analysis. Various kinetic parameters have been determined from the thermal data and decomposition follows first order kinetics. The solid—state electrical conductivity has been measured over 40–130°C-temperature range and all the compounds showed semiconducting behavior as their conductivity increases with increase in temperature. The ligand and its polychelates have also been screened for their antimicrobial activities using various microorganisms and all of them were found to be active against the organisms.     

Synthesis and solid state conformation of phenylalanine mimetics constrained in a proline-like conformation

We present the synthesis of five- and six-membered cyclic phenylalanine mimics (1, 9, 16 and 17) that are constrained in a proline-like conformation. The five-membered mimetic 16 was prepared by Ring Closing Metathesis (RCM) of diene 15, itself prepared by alpha-benzylation of the L-methionine derived oxazolidinone 10, followed by oxidative elimination, ring hydrolysis and N-allylation. The six-membered mimetic 1 was prepared by allylating the L-phenylalanine-derived oxazolidinone 5, followed by hydrolysis, N-allylation and RCM. Olefins 1 and 16 were catalytically hydrogenated to give 9 and 17, respectively. The solid state structures of 9 and 16 were determined by X-ray crystallography and their conformations compared with that of 1.