可控交联聚醚醚酮的动态力学性能

动态力学分析技术(DMA)是研究聚合物性能的重要方法之一．动态力学实验可以检测聚合物的玻璃化转变温度和次级松弛过程,直接与聚合物的链结构和聚集态结构密切相关,聚合物的化学组成、支化和交联、结晶和取向、增塑和共混等结构因素的变化,都与分子运动状态的变化密切相关,而分子运动的变化又能灵敏地反映在动态力学性能上,     

Novel photocurable monomers: The synthesis of difunctional vinyl ethers with a phosphonate group and difunctional 1‐propenyl ethers with a phosphonate group and their photoinitiated cationic polymerization

Phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were prepared by the regioselective addition reaction of glycidyl vinyl ether (GVE) or 1‐propenyl glycidyl ether with diaryl phosphonates with quaternary onium salts as catalysts. The reaction of GVE with bis(4‐chlorophenyl) phenylphosphonate gave bis[1‐(4‐chlorophenoxy methyl)‐2‐(vinyloxy)ethyl]phenylphosphonate in a 68% yield. The structures of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were confirmed by IR and ¹H NMR spectra and elemental analysis. Photoinitiated cationic polymerizations of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were investigated with photoacid generators. The polymerization of vinyl ether groups and 1‐propenyl ether groups of the obtained monomers proceeded very smoothly with a sulfonium‐type cationic photoinitiator, bis[4‐(diphenylsulfonio)phenyl]sulfide‐bis(hexafluorophosphate), upon UV irradiation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3105–3115, 2005     

Enhanced diastereoselectivity in beta-mannopyranosylation through the use of sterically minimal propargyl ether protecting groups

[reaction: see text] 2-O-Propargyl ethers are shown to be advantageous in the 4,6-O-benzylidene acetal directed beta-mannosylation reaction. The effect is most pronounced when the O3 protecting group is a bulky silyl ether or a glycosidic bond; however, even with a 3-O-benzyl ether, the use of a 2-O-propargyl ether results in a significant increase in diastereoselectivity. The beneficial effect of the propargyl ether is thought to be a combination of its minimal steric bulk, as determined by a measurement of the steric A-value and of its moderately disarming nature, as reflected in the pKa of propargyl alcohol. Conversely, the application of a 3-O-propargyl ether in the benzylidene acetal directed mannosylation has a detrimental effect on stereoselectivity, for which no explanation is at present available. Deprotection is achieved by base-catalyzed isomerization of the propargyl ether group to the corresponding allenyl ether, followed by oxidative cleavage with N-methylmorpholine N-oxide and catalytic osmium tetroxide.     

Acyl Iodides in Organic Synthesis: VI. Reactions with Vinyl Ethers

Reactions of acetyl iodide with butyl vinyl ether, 1,2-divinyloxyethane, phenyl vinyl ether, 1,4-di-vinyloxybenzene, and divinyl ether were studied. Vinyl ethers derived from aliphatic alcohols (butyl vinyl ether and 1,2-divinyloxyethane) react with acetyl iodide in a way similar to ethyl vinyl ether, i.e., with cleavage of both O–Csp2 and Alk–O ether bonds. From butyl vinyl ether, a mixture of vinyl iodide, butyl acetate, vinyl acetate, and butyl iodide is formed, while 1,2-divinyloxyethane gives rise to vinyl iodide, vinyl acetate, and 2-iodoethyl acetate. The reaction of acetyl iodide with divinyl ether involves cleavage of only one O–Csp2 bond, yielding vinyl acetate and vinyl iodide. In the reactions of acetyl iodide with phenyl vinyl ether and 1,4-divinyloxybenzene, only the O–CVin bond is cleaved, whereas the O–CAr bond remains intact.     

Mechanism for the formation of gas-phase protonated alcohol-ether adducts by VUV laser ionization and density-functional calculations

The neutral vapors above liquid alcohol/ether mixtures, (diethyl ether/methanol, diethyl ether/ethanol, tetrahydrofuran/methanol, and tetrahydrofuran/ethanol) were co-expanded with He in a supersonic jet, ionized with a 118-nm vacuum ultraviolet laser, and detected in a time-of-flight mass spectrometer. In each case, features attributed to protonated alcohol-ether dimers and protonated ether monomers were observed, as well as those ions obtained by ionizing neat alcohol or ether samples alone. Theoretical calculations, carried out to establish the energetics of the various possible reactions leading to the formation of the observed binary adducts, indicate that the most thermodynamically favorable pathway corresponds to the addition of a protonated alcohol monomer to neutral ether.     

Applications of Fourier Transform Raman spectroscopy in the synthetic polymer field

The application of FT Raman spectroscopy in the study of a wide range of polymer systems is discussed. The following have been included to give the reader an insight into the variety of areas which can successfully be studied using this important technique: the problem of crystallinity; nylons; poly(aryl ether ketone) and poly(aryl ether ether ketone); poly(aryl ether ether sulphone) and poly(aryl ether sulphone); epoxy resin curing; copolymers; copolymers of tetrafluoroethylene and hexafluoropropylene; polythioethers; and gels.     

Gas-phase reactions of brominated diphenyl ethers with OH radicals

A small volume reaction chamber coupled to a mass spectrometer was used to study the gas-phase kinetics and mechanism of the reaction of OH radicals with diphenyl ether and seven polybrominated diphenyl ethers (PBDEs) with 1-2 bromines. Relative rate constants for these reactions were determined using isopropyl nitrite photolysis in He-air mixtures at approximately 740 Torr between the temperatures of 326-388 K. The Arrhenius expression for each compound was used to extrapolate the following OH rate constants at 298 K (in units of 10(-12) cm3 molecule(-1) s(-1), with 95% confidence intervals): diphenyl ether, 7.45 +/- 0.13; 2-bromodiphenyl ether, 4.7; 3-bromodiphenyl ether, 4.6; 4-bromodiphenyl ether, 5.7; 2,2'-dibromodiphenyl ether, 1.3; 2,4-dibromodiphenyl ether, 3.8; 3,3-dibromodiphenyl ether, 3.2; and 4,4'-bromodiphenyl ether, 5.1. The measured OH rate constants are in reasonable agreement with those predicted by structure activity relationships. Positive temperature dependences of these OH rate constants are observed for all compounds measured except for diphenyl ether and 4,4'-dibromodiphenyl ether. Bromophenols (in yields up to 20% relative to the amount of PBDE consumed) and Br2 were characterized as products of these reactions, suggesting that OH addition to ipso positions of these brominated aryls may be an important reaction pathway.     

Electrochemical fluorination of chlorine-containing ethers

The electrochemical fluorination of chlorine-containing ethers has been studied. In general, it was found that a chlorine bonded to an a-carbon atom in the ethers was readily removed during electrochemical reaction in anhydrous hydrogen fluoride, whilst a chlorine bonded to the β-carbon atom was retained to yield β-chlorinated polyfluoroethers.Through the use of this method, several new chloropolyfluoroethers, e.g. 2-chloro-1,1,2,2-tetrafluoroethyl difluoromethyl ether, 2,2-dichloro-1,1,2-trifluoroethyl trifluoromethyl ether 2,2-dichloro-1,1,2-trifluoroethyl difluoromethyl ether, 2,2-dichloro-1,1,2-trifluoroethyl chlorodifluoromethyl ether, 2-chloro-1,1,2,2-tetrafluoroethyl chlorodifluoromethyl ether and 2,2-trichloro-1,1-difluoroethyl trifluoromethyl ether, have isolated and characterized.     

Synthesis of bastadin-6 trimethyl ether,a novel 28-membered ring lactam

Bastadin-6 trimethyl ether, a 28-membered ring lactam, was synthesized by means of phenolic exidation of dibromobastadin-2 trimethyl ether with thallium (III0 nitrate (TTN) leading to the formation of the corresponding macrocyclic biphenyl ether as a key step. From bastadin-2 trimethyl ether, a 26-membered ring compound was also synthesized.     

13C nuclear magnetic resonance studies on the stereochemical configurations of 2,4-dimethoxypentane and poly(alkyl vinyl ethers)

¹³C nuclear magnetic resonance (CMR) spectra were obtained for 2,4-dimethoxypentane, which is a model compound of poly(methyl vinyl ether), and the effects of the solvent and temperature on the chemical shifts were investigated. CMR spectra of poly-(alkyl vinyl ethers) were also determined and analyzed. The diad tacticities were obtained from β-methylene carbon resonances of poly(methyl vinyl ether), poly(ethyl vinyl ether), and poly(isobutyl vinyl ether), but not from those of poly(isopropyl vinyl ether) and poly(tert-butyl vinyl ether). The methoxyl carbon resonance of poly(methyl vinyl ether) and the ethoxyl methylene carbon resonance of poly(ethyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively. The α-methine and quaternary carbon resonances of poly(tert-butyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively.     

Study on dynamics characteristics of wet air oxidation of non-ionic surfactants

Wet air oxidation is an effective method to deal with highly concentrated nondegradable emulsification wastewater which contains non-ionic surfactants. This article illustrates our investigation on dynamic characteristics of wet air oxidation of typical non-ionic surfactants like polyether, phenol ether and widely used alcohol ether. The experimental results indicated that the oxidation rate of polyether, phenol ether and alcohol ether obviously ascended as the temperature rose. A good oxidation effect was available at 240℃. The TOC removal rate could reach 88.0%, 94% and 91.5%, after 125 min reaction. Alcohol ether was prone to an easier oxidation compared with polyether and phenol ether when the temperature was 220℃ or below. The oxidation rate of alcohol ether was higher than that of polyether at 160℃, while the oxidation rate of polyether was higher than that of phenol ether between 180℃ and 220℃. During the later period of the reaction at 240℃, the rate of phenol ether was higher than that of alcohol ether, which was still higher than that of polyether. Partitioned first order kinetics model analy-sis showed that the apparent activation energy of alcohol ether was lower than that of both polyether and phenol ether in the leading stage and lagging stage, and it was easy to acquire a higher oxidation rate for alcohol ether at low temperature. Three parameter general dynamics model analyses showed that the reason why the oxidation rate of polyether was lower than that of alcohol ether was that the oxidation of polyether was more apt to be converted to intermediate production than that of alcohol ether, whereas between 200℃ and 220℃, the direct oxidation rate of polyether and the oxidation rate of intermediate product were obviously lower than that of alcohol ether. The apparent activation energy of direct and indirect oxidation of polyether was 43.37 and 60.45 kJ?mol?1, respectively, while the corre-sponding apparent activation energy of alcohol was 38.74 and 58.09 kJ·mol?1, respectively.     

Is the ether group hydrophilic or hydrophobic?

A series of six surfactants, each with two ether oxygens within otherwise all-hydrocarbon chains, were synthesized and examined for their colloidal properties. Since an ether oxygen is sterically and conformationally similar to the methylene group it has replaced, the ether effect on micellization should stem mainly from solvation of the oxygen and, possibly, disrupted hydrophobicity of its adjacent carbons. It was found that critical aggregation values among the surfactants differ only modestly despite the total length of the ether-separated carbon segments ranging from 12 to 18. Shorter ether surfactants with only 12 or 14 total carbons appear to form small, loose aggregates owing, presumably, to a mild hydrophilicity of the ether groups. A surfactant with 18 chain carbons has a greater tendency to associate hydrophobically, but this is counterbalanced by a relatively water-free environment encountered by the ether groups within a more conventional micelle interior. The result is a leveling effect in which the critical aggregation concentration (cac) loses it sensitivity to chain length. Above their cac's, none of the ether surfactants is a good solubilizer of tetramethysilane or mesitylene. This is not necessarily a predictable finding since it was conceivable that the presence of interior ether groups might actually enhance solubilization (much as ether is a better solvent than hexane). Foamability and solid adsorption studies also indicate that the ethers impair surface activity. In response to the question posed in the paper's title, two ether groups are not sufficiently hydrophilic to prevent aggregation, but they do manage to alter the micelles' morphology and properties considerably.     

Design of composite films and ultrathin membranes of interpolymer complexes

The formation of stoichiometric interpolymer complexes (IPCs) between the poly(vinyl ether) of ethyleneglycol and the copolymer of acrylic acid–butyl vinyl ether, between copolymers of vinyl ether of ethyleneglycol–butyl vinyl ether, and the copolymer of acrylic acid–vinylbutyl ether is demonstrated by conductimetric, potentiometric, viscometric and spectroturbidimetric methods in aqueous solution. The swelling/deswelling behavior of composite films derived from the IPC has been studied in water, alcohol and water–alcohol mixtures, depending on various factors. The formation of polyelectrolyte complexes (PECs) between the copolymer of acrylic acid–vinyl butyl ether and poly(vinyl ether of monoethanolamine) on a dimeric interface of water–butanol has been studied by the potentiometric method. The kinetics of PEC formation on a dimeric interface was measured and the activation energy of this process was calculated. Copyright © 2000 John Wiley & Sons, Ltd.     

醚的初始暗氧化反应机理的研究

有机化合物的空气氧化是一个历史悠久的研究课题。早在1851年Schonbein[1]就注意到醚在空气中会被氧化产生过氧化物。本世纪初,Clover和Milas分析了醚的空气氧化产物,并且对醚的氧化机理,进行了研究。     

Separation of inorganic anions by liquid chromatography with crown ether as eluent additive

Inorganic anions were separated on a reversed-phase stationary phase dynamically modified with crown ether as a selector in capillary ion chromatography. The eluent contained crown ether, acetonitrile and a salt. Free and cation-trapped crown ether molecules in the eluent were adsorbed on a hydrophobic stationary phase such as triacontyl-functionalized silica (C30). The eluent cations trapped on crown ether worked as the ion-exchange sites, where the eluent anions and the analyte anions were competing for electrostatic interaction. The sizes of crown ether and the salt cation affected the retention of analyte anions. The concentrations of acetonitrile and crown ether as well as the eluent anion also affected the retention of analyte anions. An aqueous solution containing 18-crown-6-ether, potassium salt and acetonitrile achieved larger retention for analyte anions. Effects of the eluent conditions on the retention of analyte anions were examined in detail.     

冠醚桥接苯并菲二聚体合成的新途径

本研究借鉴合成冠醚的Willianmson反应,通过缓慢滴加二氯乙醚合成了重要中间体乙氧基醚链接的苯并菲二聚体,且避免了2,3-二羟基四戊烷氧基苯并菲自身成环反应所导致单一冠醚苯并菲的生成.进一步以该中间体为原料,通过缩合反应,最终得到了冠醚桥接苯并菲二聚体,并用1H NMR,13C NMR和MALDI-TOF质谱对产物的结构和纯度进行了表征.     

Some reactions of polyfluoroalkyl ethers and the preparation of bis(trifluorovinyl) ether

d1 and meso Bis (1,2,2-trifluoroethyl) ether and 1,1,2,2 tetrafluoroethyl 1,1,2-trifluoroethyl ether with aluminium halides or boron trichloride yield halogenopolyfluoroalkyl ethers. The epimerisation of the d1 and meso stereoisomers is discussed. Chlorination of bis (1,2,2-trifluoroethyl) ether and 1,1,2,2-tetrafluoroethyl 1,2,2-trifluoroethyl ether gives new chloropolyfluorodiethyl ethers and from bis (1,2-dichlorotrifluoroethyl) ether, bis (trifluorovinyl) ether is obtained by dechlorination.     

Stereospecific debenzylative cycloetherification of carbohydrate-derived allylic alcohols, ethers and esters to form vinyl C-furanosides

Benzyl ether protected polyhydroxylated alkene compounds containing allylic alcohol, ether or ester functionality undergo a stereospecific cyclisation reaction upon treatment with TFA-acetonitrile-toluene with inversion of configuration at the allylic position and loss of a benzyl ether to give tetrahydrofurans.     

Simultaneous determination of NOGE-related and BADGE-related compounds in canned food by ultra-performance liquid chromatography–tandem mass spectrometry

An improved analytical method enabling rapid and accurate determination and identification of bisphenol F diglycidyl ether (novolac glycidyl ether 2-ring), novolac glycidyl ether 3-ring, novolac glycidyl ether 4-ring, novolac glycidyl ether 5-ring, novolac glycidyl ether 6-ring, bisphenol A diglycidyl ether, bisphenol A (2,3-dihydroxypropyl) glycidyl ether, bisphenol A (3-chloro-2-hydroxypropyl) glycidyl ether, bisphenol A bis(3-chloro-2-hydroxypropyl) ether, and bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) ether in canned food and their contact packaging materials has been developed by using, for the first time, ultra-performance liquid chromatography coupled with tandem mass spectrometry. After comparison of electrospray ionization and atmospheric pressure chemical ionization in positive and negative-ion modes, tandem mass spectrometry with positive electrospray ionization was chosen to carry out selective multiple reaction monitoring analysis of novolac glycidyl ethers, bisphenol A diglycidyl ether, and its derivatives. The analysis time is only 5.5 min per run. Limits of detection varied from 0.01 to 0.20 ng g(-1) for the different target compounds on the basis of a signal-to-noise ratio (S/N) = 3; limits of quantitation were from 0.03 to 0.66 ng g(-1). The relative standard deviation for repeatability was <8.01%. Analytical recovery ranged from 87.60 to 108.93%. This method was successfully applied to twenty samples of canned food and their contact packaging materials for determination of migration of NOGE, BADGE, and their derivatives from can coatings into food.     

高效液相色谱-串联质谱法同时测定肉类罐头中双酚-二缩水甘油醚

建立了同时测定肉类罐头中双酚A-二缩水甘油醚(BADGE)、双酚F-二缩水甘油醚(BFDGE)及其衍生物双酚A-(2,3-二羟丙基)甘油醚(BADGE•H2O)、双酚A-双(2,3-二羟丙基)醚(BADGE•2H2O)、双酚A-(3-氯-2-羟丙基)(2,3-二羟丙基)醚(BADGE•H2O•HCl)、双酚A-(3-氯-2-羟丙基)甘油醚(BADGE•HCl)、双酚A-双(3-氯-2-羟丙基)醚(BADGE•2HCl)、双酚F-双(2,3-二羟丙基)醚(BFDGE•2H2O)、双酚F-双(3-氯-2-羟丙基)醚(BFDGE•2HCl)9种环境激素的高效液相色谱-串联质谱分析方法。样品经叔丁基甲醚提取,HLB固相萃取小柱净化,C18色谱柱分离,用5 mmol/L醋酸铵溶液(含0.1%甲酸)与甲醇为流动相梯度洗脱,质谱多反应监测(MRM)模式检测,基质标准校正,外标法定量。结果表明,这9种化合物在10.0～2000.0 μg/L范围内线性关系良好;定量限(以信噪比≥10计)为10.0 μg/kg;在高、中、低3个加标水平下9种化合物的平均添加回收率为79.6%～100.9%,相对标准偏差为6.3%～12.1%。该方法具有较高的灵敏度和准确度,能满足法规要求的对肉类罐头中双酚A-二缩水甘油醚、双酚F-二缩水甘油醚及其衍生物残留量的快速检测及准确定量。