Controlled domain wall motion by current into patterned-U Ni80Fe20 wires

The current-induced domain wall motion was observed experimentally in the case of the domain wall trapped at the semicircular arc within the U shape Ni₈₀Fe₂₀ wire. The measurement of the current-induced domain wall motion was achieved by adding a biased field before switching field and a critical current density was measured. We found two magnetic domain structures in the U pattern. At zero fields, the vortex domain wall nucleated at the semicircular arc of the U pattern. Continuous magnetic state without wall was investigated in near-switching field.     

Temperature dependence of the spin torque effect in current-induced domain wall motion

We present an experimental study of domain wall motion induced by current pulses as well as by conventional magnetic fields at temperatures between 2 and 300 K in a 110 nm wide and 34 nm thick Ni80Fe20 ring. We observe that, in contrast with field-induced domain wall motion, which is a thermally activated process, the critical current density for current-induced domain wall motion increases with increasing temperature, which implies a reduction of the spin torque efficiency. The effect of Joule heating due to the current pulses is measured and taken into account to obtain critical fields and current densities at constant sample temperatures. This allows for a comparison of our results with theory.     

Efficient current-induced domain-wall displacement in SrRuO3

We demonstrate current-induced displacement of ferromagnetic domain walls in submicrometer fabricated patterns of SrRuO3 films. The displacement, monitored by measuring the extraordinary Hall effect, is induced at zero applied magnetic field and its direction is reversed when the current is reversed. We find that current density in the range of 10(9)-10(10) A/m2 is sufficient for domain-wall displacement when the depinning field varies between 50 to 500 Oe. These results indicate relatively high efficiency of the current in displacing domain walls which we believe is related to the narrow width (approximately 3 nm) of domain walls in this compound.     

Spin-transfer torques in antiferromagnetic metals from first principles

In spite of the absence of a macroscopic magnetic moment, an antiferromagnet is spin-polarized on an atomic scale. The electric current passing through a conducting antiferromagnet is polarized as well, leading to spin-transfer torques when the order parameter is textured, such as in antiferromagnetic noncollinear spin valves and domain walls. We report a first principles study on the electronic transport properties of antiferromagnetic systems. The current-induced spin torques acting on the magnetic moments are comparable with those in conventional ferromagnetic materials, leading to measurable angular resistances and current-induced magnetization dynamics. In contrast to ferromagnets, spin torques in antiferromagnets are very nonlocal. The torques acting far away from the center of an antiferromagnetic domain wall should facilitate current-induced domain wall motion.     

Magnetization switching modes in nanopillar spin valve under the external field

The current-induced magnetic switching is studied in Co/Cu/Co nanopillar with an in-plane magnetization traversed under the perpendicular-to-plane external field.Magnetization switching is found to take place when the current density exceeds a threshold.By analyzing precessional trajectories,evolutions of domain walls and magnetization switching times under the perpendicular magnetic field,there are two different magnetization switching modes:nucleation and domain wall motion reversal;uniform magnetization ...     

Phenomenology of current-induced dynamics in antiferromagnets

We derive a phenomenological theory of current-induced staggered magnetization dynamics in antiferromagnets. The theory captures the reactive and dissipative current-induced torques and the conventional effects of magnetic fields and damping. A Walker ansatz describes the dc current-induced domain-wall motion when there is no dissipation. If magnetic damping and dissipative torques are included, the Walker ansatz remains robust when the domain wall moves slowly. As in ferromagnets, the domain-wall velocity is proportional to the ratio between the dissipative torque and the magnetization damping. In addition, a current-driven antiferromagnetic domain wall acquires a net magnetic moment.     

Influence of exchange coupling on current-driven domain wall motion in a nanowire

In this study, the effect of exchange stiffness constant on current-driven domain wall motion in nanowires with in-plane magnetic anisotropy (IMA) and perpendicular magnetic anisotropy (PMA) has been investigated using micromagnetic simulation. The critical current density in a nanowire with IMA decreases as the exchange stiffness constant decreases because the domain wall width at the upper edge of the nanowire narrows according to the decrease of the exchange stiffness constant. On the other hand, the critical current density in a nanowire with PMA slightly decreases contrary to that of IMA although the domain wall width reasonably decreases as the exchange stiffness constant decreases. The slight reduction rate of the critical current density is due to the increase of the effective hard-axis anisotropy of PMA nanowire.     

Domain wall creation in nanostructures driven by a spin-polarized current

We report on current-driven magnetization reversal in nanopillars with elements having perpendicular magnetic anisotropy. Whereas only the two uniform magnetization states are available under the action of a magnetic field, we observed current-induced Bloch domain walls in pillars as small as 50 x 100 nm(2). This domain wall state can be further controlled by current to restore the uniform states. The ability to nucleate and manipulate domain walls by a current gives insight into the reversal mechanisms of small nanoelements and provides new prospects for ultrahigh density spintronic devices.     

Thermal spin-transfer torques on magnetic domain walls

We studied the spin-transfer torques acting on magnetic domain walls in the presence of a nonequilibrium thermal distribution using a generalized Landauer–Büttiker formalism, where the energy flow is described on the same footing as the electric current. First-principles transport calculations have been performed in Ni and Co domain walls as typical examples. The temperature difference between two sides of the domain wall can induce remarkable spin- transfer torques, which are comparable with the current-induced torques required for the domain wall motion.     

Tunable resistivity of individual magnetic domain walls

Despite the relevance of current-induced magnetic domain wall (DW) motion for new spintronics applications, the exact details of the current-domain wall interaction are not yet understood. A property intimately related to this interaction is the intrinsic DW resistivity. Here, we investigate experimentally how the resistivity inside a DW depends on the wall width Δ, which is tuned using focused ion beam irradiation of Pt/Co/Pt strips. We observe the nucleation of individual DWs with Kerr microscopy, and measure resistance changes in real time. A 1/Δ(2) dependence of DW resistivity is found, compatible with Levy-Zhang theory. Also quantitative agreement with theory is found by taking full account of the current flowing through each individual layer inside the multilayer stack.     

Fast current-induced motion of a transverse domain wall induced by interfacial Dzyaloshinskii–Moriya interaction

Based on a theoretical study, we show that the interfacial Dzyaloshinskii–Moriya interaction results in very efficient current-induced manipulation of a transverse domain wall in magnetic nanowires. The efficient domain wall motion is caused by combined effects of the domain wall distortion induced by the interfacial Dzyaloshinskii–Moriya interaction and the damping-like spin–orbit spin transfer torque. We find that with reasonable parameters, the domain wall velocity reaches a few hundreds m/s at the current density of 10⁷ A/cm², which has never been achieved before. Our result will be beneficial for low-power operation of domain wall devices.     

Direct imaging of stochastic domain-wall motion driven by nanosecond current pulses

Magnetic transmission x-ray microscopy is used to directly visualize the influence of a spin-polarized current on domain walls in curved permalloy wires. Pulses of nanosecond duration and of high current density up to 1.0x10(12) A/m(2) are used to move and to deform the domain wall. The current pulse drives the wall either undisturbed, i.e., as composite particle through the wire, or causes structural changes of the magnetization. Repetitive pulse measurements reveal the stochastic nature of current-induced domain-wall motion.     

Controlled and reproducible domain wall displacement by current pulses injected into ferromagnetic ring structures

In a combined numerical and experimental study, we demonstrate that current pulses of different polarity can reversibly and controllably displace a magnetic domain wall (DW) in submicrometer permalloy (NiFe) ring structures. The critical current densities for DW displacement are correlated with the specific spin structure of the DWs and are compared to results of micromagnetic simulations including a spin-torque term. Using a notch, an attractive local pinning potential is created for the DW resulting in a highly reproducible spin structure of the DW, critical for reliable current-induced switching.     

Rashba spin-orbit coupling effects on a current-induced domain wall motion

A current-induced domain wall motion in magnetic nanowires with a strong structural inversion asymmetry [I.M. Miron, T. Moore, H. Szambolics, L.D. Buda-Prejbeanu, S. Auffret, B. Rodmacq, S. Pizzini, J. Vogel, M. Bonfim, A. Schuhl, G. Gaudin, Nat. Mat. 10 (2011) 419] seems to have novel features such as the domain wall motion along the current direction or the delay of the onset of the Walker breakdown. In such a highly asymmetric system, the Rashba spin-orbit coupling (RSOC) may affect a domain wall motion. We studied theoretically the RSOC effects on a domain wall motion and found that the RSOC, indeed, can induce the domain wall motion along the current direction in certain situations. It also delays the Walker breakdown and for a strong RSOC, the Walker breakdown does not occur at all. The RSOC effects are sensitive to the magnetic anisotropy of nanowires and also to the ratio between the Gilbert damping parameter α and the non-adiabaticity parameter β.     

Nonlinear domain-wall velocity enhancement by spin-polarized electric current

The interaction between a dc spin-polarized electric current and a magnetic domain wall in a Permalloy nanowire was studied by high-bandwidth scanning Kerr polarimetry. The full functional dependence of wall velocity on electric current and magnetic field is presented. With the pinning potential nulled by a field, current-induced velocity enhancements exceeded 35 m/s at a current density of approximately 6 x 10(11) A/m(2). This large enhancement, more than 10 times that found in pinning-dominated experiments, results in part from an interaction that is nonlinear in current and independent of current direction.     

Roles of the magnetic field and electric current in thermally activated domain wall motion in a submicrometer magnetic strip with perpendicular magnetic anisotropy

We have experimentally studied micrometer-scale domain wall (DW) motion driven by a magnetic field and an electric current in a Co/Pt multilayer strip with perpendicular magnetic anisotropy. The thermal activation energy for DW motion, along with its scaling with the driving field and current, has been extracted directly from the temperature dependence of the DW velocity. The injection of DC current resulted in an enhancement of the DW velocity independent of the current polarity, but produced no measurable change in the activation energy barrier. Through this analysis, the observed current-induced DW velocity enhancement can be entirely and unambiguously attributed to Joule heating.     

Current-driven magnetization switching and domain wall motion in nanostructures—Survey of recent experiments

An overview of recent experimental studies and new routes in the field of current-driven magnetization dynamics in nanostructured materials is given. The review introduces the basic concepts (Landau–Lifshitz phenomenology, critical current, spin currents in relation to spin accumulation, adiabatic/non-adiabatic spin-torque) and describes the main results of recent experiments on current-driven magnetization reversal within vertical pillar-like nanostructures and current-driven domain wall motion within laterally confined specimens. While for the pillar systems a discussion is provided of how the introduction of layers with perpendicular magnetic anisotropy, tunnel barriers and exchange bias and(or) oxide layers can be used to reduce the critical current densities for current-induced switching, the role of perpendicular anisotropy, use of spin valve structures, diluted magnetic semiconductors and epitaxial materials to increase the domain wall velocities are reviewed in the case of current-driven domain wall movement within lateral systems.     

Temperature estimation in a ferromagnetic Fe-Ni nanowire involving a current-driven domain wall motion

We observed a magnetic domain wall (DW) motion induced by the spin-polarized pulsed current in a nanoscale Fe(19)Ni(81) wire using a magnetic force microscope. High current density, which is of the order of 10(11) A m(-2), was required for the DW motion. A simple method to estimate the temperature of the wire was developed by comparing the wire resistance measured during the DW motion with the temperature dependence of the wire resistance. Using this method, we found the temperature of the wire was proportional to the square of the current density and became just beneath at the threshold Curie temperature. Our experimental data qualitatively support this analytical model that the temperature is proportional to the resistivity, thickness, width of the wire and the square of the current density, and also inversely proportional to the thermal conductivity.     

Current driven magnetization dynamics in ferromagnetic nanowires with a Dzyaloshinskii-Moriya interaction

We study current-induced magnetization dynamics in a long thin ferromagnetic wire with a Dzyaloshinskii-Moriya interaction (DMI). We find a spiral domain wall configuration of the magnetization and obtain an analytical expression for the width of the domain wall as a function of the interaction strengths. Our findings show that above a certain value of DMI a domain wall configuration cannot exist in the wire. Below this value we determine the domain wall dynamics for small currents, and calculate the drift velocity of the domain wall along the wire. We show that the DMI suppresses the minimum value of current required to move the domain wall. Depending on its sign, the DMI increases or decreases the domain wall drift velocity.