Structure and magnetic properties of co-sputtered Co–C thin films

We studied the structure and magnetic properties of co-sputtered Co_1−xC_x thin films using a transmission electron microscope (TEM) and a SQUID magnetometer. These properties were found to depend critically on deposition temperature, T_S, and composition, x. Generally, phase separation into metallic Co and graphite-like carbon phases proceeds with increasing T_S and decreasing x. Plan view and cross-sectional TEM images of the films prepared showed that Co grains about 10–20 nm in diameter and 30–50 nm in height are three-dimensionally separated by graphite-like carbon layers 1–2 nm thick. Optimum magnetic properties with saturation magnetization of 380 emu/cc and coercivity of 400 Oe were obtained for a film with x=0.5 and T_S=350°C.     

Role of Al atom on structural and magnetic properties of β-SiC:Cr

The electronic structure, magnetic properties and also the bonding mechanism of the pure SiC and compounds SiC:Cr and SiC:Cr:Al have been studied using the Quantum SPRESSO Software within the density-functional theory (DFT). β-SiC, which is a nonmagnetic semiconductor, has more applications in industry. For the magnetic property, it is alloyed with transition metal. One of the transition metal is chromium. The calculations showed that its alloy at both Si site and C site (SiC:Cr) changes the physical properties of the host material and contributes in the molecular bond. It is seen that if the Al atom was doped in the compounds, SiC:Cr will produce hole carriers and the magnetic properties will thus increase to the considerable values due to the mediation effect. The magnetic property will create the up and down spin band gap to filter carriers. The charge density distribution illustrates that the Al atom has the atomic behavior in the compounds Sic:Cr:Al and does not contribute in the molecular bond. For comparison, the calculations were performed for the pure β-SiC.     

Effects of underlayer materials and substrate temperatures on the structural and magnetic properties of Nd2Fe14B films

Thin films of Nd_2Fe_{14}B were fabricated on heated glass substrates by dc magnetron sputtering. Different material underlayers (Ta, Mo, or W) were used to examine the underlayer influence on the structural and magnetic properties of the NdFeB films. Deposited on a Ta buffer layer at 420℃, the 300 nm thick NdFeB films were shown to be isotropic. But when the substrate temperature T_s was elevated to 520℃, the Nd_2Fe_{14}B crystallites of (00l) plane were epitaxially grown on Ta (110) underlayer. In contrast, Mo (110) buffer layer could not induce any preferential orientation in NdFeB film irrespective of the substrate temperature or film thickness. The W buffer layer was found to be most effective for the nucleation of Nd_2Fe_{14}B crystallites with c-axis alignment perpendicular to the film plane when T_s<490℃. But at T_s=490℃ the magnetic layer became isotropic. The maximum coercivity obtained was about 995 kA/m for the 100nm film deposited on W underlayer at 490℃. These variations were tentatively explained in terms of the lattice misfit between the underlayer and the magnetic layer, combined with the considerations of underlayer morphologies.     

The microstructure and magnetic properties of electrodeposited Co–Pt thin films on Ru buffer layer

For high-density magnetic recording media, this study examined the crystal structure and the texture of electrodeposited cobalt–platinum (Co–Pt) films on Ru buffer layer. A 15-nm-thick Co–Pt film exhibited very high out-of-plane coercivity and squareness, which were 6248 Oe and 0.89, respectively. The coercivity, H_c, of Co–Pt films grown on Ru buffer layer decreased significantly with increasing thickness, possibly due to the lattice misfit of 5.4% between Co–Pt and Ru, leading to the decrease of perpendicular magnetic anisotropy (PMA) of Co–Pt films as indicated by the observed hexagonal-closed-packed (HCP) (1 1¯ 0 1) plane of Co–Pt films. According to nano beam diffraction pattern (NBDP), however, Co–Pt film grown on Ru layer of HCP exhibited mixed HCP and FCC phases. Also, cross-sectional TEM image suggests that the high PMA may result from the columnar structure of physically isolated Co–Pt grains with the c-axis perpendicular to the film plane.     

Microstructures and soft magnetic properties of as-deposited Fe–Sm–O thin films

The influences of O₂ partial pressure on saturation magnetization, coercivity and effective permeability of the as-deposited Fe–Sm–O thin films, which were fabricated by RF magnetron reactive sputtering method, were investigated. The nanocrystalline Fe_83.4Sm_3.4O_13.2 thin film fabricated at O₂ partial pressure of 5% exhibited the best magnetic softness with a saturation magnetization of 1.43 MA/m, coercivity of 65.2 A/m and effective permeability of about 2600 in the frequency range from 0.5 to 100 MHz. The electrical resistivity of Fe_83.4Sm_3.4O_13.2 was 130 μΩ cm. The microstructures and electrical resistivity were investigated in this work.     

Correlation between structural and giant magnetoresistance properties of Fe–Ag nanogranular films

Fe _x Ag_1?x granular thin-films, with the atomic Fe concentration, x, ranging from 0 up to 0.5, were deposited by dc magnetron co-sputtering. The giant magnetoresistance (GMR) intensity is maximum at x _I  = 0.32, while the maximum of GMR efficiency, γ, i.e., the change of GMR intensity for a unit change of reduced squared magnetization, is observed at x _γ = 0.26. Owing to the spin-dependent scattering features, the GMR intensity and γ depend on both the concentration and the arrangement of the magnetic material. Therefore, to explain the difference between x _I and x _γ and to understand how the structural properties affect the magnetoresistive behaviour, we performed magnetization, Mössbauer and X-ray diffraction measurements as a function of x. X-ray data indicate that the granular films exhibit three different regimes: for x < 0.2, they can be described as a Fe–Ag solid solution; for 0.2 < x < 0.32 the Fe–Ag solid solution is still observed and very small Fe precipitates are found; finally, for x > 0.32, a Fe–Ag saturated solid solution is detected, containing bcc Fe clusters whose size is about 10 nm. Differently, for all the concentrations, magnetization data show the presence of Fe precipitates, whose size increases with x, and the Mössbauer investigation confirms this picture. We find that the samples grown at x = x _γ display the finest Fe dispersion within the Ag matrix, as the Fe–Ag solid solution is nearly at saturation and the Fe cluster size is of the order of a few nanometers; this arrangement possibly maximizes the magnetic/non-magnetic interface extension thus enhancing the GMR efficiency. If x is slightly increased, the increase in total Fe content compensates the GMR efficiency reduction, so the GMR intensity maximum is observed.     

Synthesis and magnetic properties of Co–Zn magnetic fluid

Co_1−xZn_xFe₂O₄ (with x varying from 0 to 0.7) nanoparticles to be used for ferrofluid preparation were prepared by chemical co-precipitation method. The fine particles were suitably dispersed in transformer oil using oleic acid as the surfactant. The magnetization (M_s) and the size of the particles were measured at room temperature. The magnetization (M_s) was found to decrease with the increase in zinc substitution. The magnetic particle size (D_m) of the fluid was found to vary from 11.19 to 4.25 nm decreasing with the increase in zinc substitution.     

The high frequency magnetic properties of self assembled Fe–Co–Si–N nanogranular thin films

The effect of a variation in Si and N concentration on the microstructure, crystal structure and high-frequency magnetic properties of Fe–Co–Si–N nanogranular thin films was investigated. The films, prepared by rf magnetron sputtering, consisted of nanosized grains of FeCo as well as a Si and N rich intergranular amorphous phase. The Si concentration had a significant effect on the crystal structure of the FeCo phase. The resistivities of the Fe–Co–Si–N films were significantly enhanced by an increase in Si concentration. The resonant frequency of the Fe–Co–Si–N films could be tuned from 0.45 GHz to 2.1 GHz by controlling Si concentration. The N concentration greatly influenced magnetic properties and the variation in resonant frequency is in agreement with Kittel’s equation.     

Role of the chemical ordering on the magnetic properties of Fe–Ni cluster alloys

The spin and orbital moments of fcc Fe-Ni cluster alloys are determined within the framework of a d-band Hamiltonian including the spin-orbit coupling non perturbatively. Different sizes (up to 321 atoms), compositions, and chemical configurations (random alloys as well as core-shell arrays of iron and nickel atoms) are considered in order to reveal the crucial role played by local order and stoichiometry on the magnetic moments of the clusters. Interestingly, we have found considerably reduced average magnetizations for Fe-Ni clusters with Fe cores compared to that of the bulk alloy with the same composition. Indeed, in these configurations not only antiparallel arrangements between the local moments of some Fe atoms within the iron core are found, but also the total magnetization of the surface Ni atoms is significantly quenched. On the opposite, the disordered and Ni-core cluster alloys are characterized by high magnetizations resulting from saturated-like contributions from both Ni and Fe atoms, in agreement with recent ab-initio calculations. In general, the local orbital magnetic moments are strongly enhanced with respect to their bulk values. Finally, the variation of the orbital-to-spin moment ratio with the chemical order is discussed.     

Improvement of microstructure and magnetic properties of Nd–Fe–B alloys by Nb and Co additions

In order to establish the role of niobium on the hydrogenation, disproportionation, desorption and recombination (HDDR) behavior of near-stoichiometric alloys, two alloys: NdI3Fe8OB7 and Nd13Fe78Nb1Co1B7 (at%) were investigated before, during and after the HDDR process. The microstructure of the as-cast Nb-free alloy before employing the HDDR process was found to consist of three phases, the matrix Nd₂Fe₁₄B (φ) phase, Nd-rich phase and a significant amount of free iron; whereas, the microstructure of the Nb-containing alloy consisted of only the first two phases.     

Structural and magnetic properties of Fe–Ni mecanosynthesized alloys

Fe_100???x Ni _x samples with x?=?22.5, 30.0 and 40.0 at.% Ni were prepared by mechanical alloying (MA) with milling times of 10, 24, 48 and 72 h, a ball mass to powder mass (BM/PM) ratio of 20:1 and rotation velocity of 280 rev/min. Then the samples were sintered at 1,000°C and characterized by X-ray diffraction (XRD) and transmission Mössbauer spectrometry (TMS). From the refinement of the X ray patterns we found in this composition range two crystalline phases, one body centered cubic (BCC), one face centered cubic (FCC) and some samples show FeO and Fe₃O₄ phases. The obtained grain size of the samples shows their nanostructured character. Mössbauer spectra were fitted using a model with two hyperfine magnetic field distributions (HMFDs), and a narrow singlet. One hyperfine field distribution corresponds to the ferromagnetic BCC grains, the other to the ferromagnetic FCC grains (Taenite), and the narrow singlet to the paramagnetic FCC grains (antitaenite). Some samples shows a paramagnetic doublet which corresponds to FeO and two sextets corresponding to the ferrimagnetic Fe₃O₄ phase. In this fit model we used a texture correction in order to take into account the interaction between the particles with flake shape and the Mössbauer $\upgamma$ -rays.     

Preparation and magnetic properties of Fe–Ag granular alloy

An aqueous solution of AgNO₃ in the presence of ammonia and Fe(CO)₅ is sonicated under a H₂/Ar mixture, yielding a nanostructured homogeneous phase of Ag/Fe₂O₃. This composite material is further reduced at 300°C under hydrogen to produce the nanophased Fe/Ag solid mixture. The as-prepared material, as well as the reduced mixture, is analyzed by various conventional methods. Magnetization loops, ESR, Mössbauer, and magnetoresistance measurements are also conducted to determine the magnetic properties of the products.     

Influence of drying conditions on the optical and structural properties of sol–gel-derived ZnO nanocrystalline films

Zinc oxide nanothin films were prepared on glass substrate by sol–gel dip-coating method using zinc acetate dihydrate, methanol, and monoethanolamine as precursor, solvent, and stabilizer, respectively. The relationship between drying conditions and the characteristics of ZnO nanocrystalline films (c-axis orientation, grain size, roughness and optical properties) was studied. The films were dried in an oven at different temperatures and by IR radiation. Then, the films were annealed at 500°C in a furnace. The chemical composition, transmission spectra, structure, and morphology of the samples were studied using infrared (IR) and UV–visible spectroscopy, X-ray diffraction (XRD), and atomic force microscopy (AFM), respectively. The XRD results show that the drying conditions affect the orientation of crystallization along the (0 0 2) plane. AFM images show that the thicknesses of the films decrease from 128 to 93 nm by changing the drying conditions. The photoluminescence (PL) of ZnO nanothin films shows the UV emission at near band edge and broad green radiation at about 465 nm wavelength.     

Enhanced structural and magnetic properties of microwave sintered Li–Ni–Co ferrites prepared by sol–gel method

The properties of lithium ferrites are very sensitive to chemical composition, synthesis method, and sintering techniques. Li–Ni–Co ferrites with compositional formula Li_(0.45-0.5x)Ni_(0.1)Co_xFe_(2.45-0.5x)O_4, where 0.00 ≤ x ≤ 0.1 in steps of 0.02 were prepared by chemical sol–gel method and sintered by microwave sintering technique. The x-ray diffraction patterns confirmed the formation of single phase with spinel structure in all the samples. The structural parameter viz.lattice constant, crystallite size, and x-ray density for these samples were studied and compared with those measured from samples of similar composition prepared by the sol–gel method and sintered by conventional sintering technique. Enhancement in the magnetic properties like Curie temperature, hysteresis parameters was observed by employing sol–gel synthesis combined with microwave sintering. The results obtained and mechanisms involved are discussed in the paper.     

Magnetic properties and reduction characteristics of Fe–Co–B catalysts

Hyperfine Interactions - The effect of the amount of boron on the magnetic properties and the reduction characteristics of Fe–Co–B catalysts have been studied by Thermal Programmed...