Synthesis of 1‐(p‐Sulphophenyl)‐3‐methyl‐5‐pyrazolone Based Acid Dyes and Their Applications on Leather

A new series of pyrazolone based azo acid dyes (3a–g) has been synthesized starting from 1‐(p‐sul‐phophenyl)‐3‐methyl‐5‐pyrazolone (1). The synthetic methodology included the nitrosation of p‐sulphophenyl methyl pyrazolone followed by reduction, diazotization and coupling with Naphthol AS derivatives (2a–f), in alkaline medium to yield different acid dyes. Multichromic metal complexes of these dyes (5a–f, 6a–f and 7a–f) with 3d transition metals Chromium, Iron and Copper were also synthesized. The structures of all of newly synthesized compounds were confirmed by analytical data and spectroscopic techniques. The synthesized dyes were applied on leather to assess their light fastness, wash fastness and rubbing fastness and were shown to exhibit high values of 4–5 for majority of dyes.     

Synthesis of Bis‐Heterocyclic 1H‐Imidazole 3‐Oxides from 3‐Oxido‐1H‐imidazole‐4‐carbohydrazides

The reaction of 1H‐imidazole‐4‐carbohydrazides 1 , which are conveniently accessible by treatment of the corresponding esters with NH₂NH₂?H₂O, with isothiocyanates in refluxing EtOH led to thiosemicarbazides (=hydrazinecarbothioamides) 4 in high yields (Scheme 2). Whereas 4 in boiling aqueous NaOH yielded 2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐thiones 5 , the reaction in concentrated H₂SO₄ at room temperature gave 1,3,4‐thiadiazol‐2‐amines 6 . Similarly, the reaction of 1 with butyl isocyanate led to semicarbazides 7 , which, under basic conditions, undergo cyclization to give 2,4‐dihydro‐3H‐1,2,4‐triazol‐3‐ones 8 (Scheme 3). Treatment of 1 with Ac₂O yielded the diacylhydrazine derivatives 9 exclusively, and the alternative isomerization of 1 to imidazol‐2‐ones was not observed (Scheme 4). It is important to note that, in all these transformations, the imidazole N‐oxide residue is retained. Furthermore, it was shown that imidazole N‐oxides bearing a 1,2,4‐triazole‐3‐thione or 1,3,4‐thiadiazol‐2‐amine moiety undergo the S‐transfer reaction to give bis‐heterocyclic 1H‐imidazole‐2‐thiones 11 by treatment with 2,2,4,4‐tetramethylcyclobutane‐1,3‐dithione (Scheme 5).     

Two new isostructural mercury(II) complexes involving the N‐heterocyclic 1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole ligand: syntheses,structures and properties

The unsymmetrical N‐heterocyclic ligand 1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole (bmi) has three potential N‐atom donors and can act in monodentate or bridging coordination modes in the construction of complexes. In addition, the bmi ligand can adopt different coordination conformations, resulting in complexes with different structures due to the presence of the flexible methylene spacer. Two new complexes, namely bis{1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole‐κN ³}dibromidomercury(II), [HgBr₂(C₁₀H₉N₅)₂], and bis{1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole‐κN ³}diiodidomercury(II), [HgI₂(C₁₀H₉N₅)₂], have been synthesized through the self‐assembly of bmi with HgBr₂ or HgI₂. Single‐crystal X‐ray diffraction shows that both complexes are mononuclear structures, in which the bmi ligands coordinate to the Hg^II ions in monodentate modes. In the solid state, both complexes display three‐dimensional networks formed by a combination of hydrogen bonds and π–π interactions. The IR spectra and PXRD patterns of both complexes have also been recorded.     

N‐{(1E)‐Amino­[3‐methyl‐5‐(4‐methyl­phenyl)‐4,5‐di­hydro‐1H‐pyrazol‐1‐yl]­methyl­ene}‐1H‐imidazole‐1‐carbox­amide

In the title compound, C₁₆H₁₈N₆O, an N‐carbonyl­imidazole derivative of pyrazoline‐1‐carboximid­amide, the π‐electron density of the N atom in the 1‐position on the pyrazoline ring is delocalized through the amidine moiety and the adjacent carbonyl group. The imidazole ring, though coplanar with the rest of the mol­ecule, is deconjugated. The pyrazoline ring adopts a flat‐envelope conformation, having the substituted phenyl ring oriented perpendicular to the mean plane of the heterocycle. Both of the two potential hydrogen‐bond donors are involved in intramolecular hydrogen‐bonding interactions.     

Highly Efficient [3 + 2] Cycloaddition: Click Synthesis of Novel 1H‐indol‐3‐yl‐benzo[d]imidazole Bis‐triazoles

A series of novel 1‐((1H‐1,2,3‐triazol‐4‐yl)methyl)‐2‐(1‐((1H‐1,2,3‐triazol‐4‐yl)methyl)‐5‐substituted‐1H‐indol‐3‐yl)‐6‐substituted‐1H‐benzo[d]imidazoles 5a – i have been prepared using click chemistry as an ideal strategy where [3 + 2] cycloaddition of azides with terminal alkynes has been developed as the target compounds. In route‐II, 5‐substituted‐1H‐indole‐3‐carbaldehydes 1a – c react with 5‐substituted orthophenylenediamine 8 to give desired products, that is, 6‐substituted‐2‐(5‐substituted‐1H‐indol‐3‐yl)‐1H‐benzo[d]imidazole 6a – i . Here, 6a – i react with 2 equiv of propargylbromide 7 to give novel 6‐substituted 2‐(5‐substituted‐1‐(prop‐2‐yn‐1‐yl)‐1H‐indol‐3‐yl)‐1‐(prop‐2‐yn‐1‐yl)‐1H‐benzo[d]imidazole 4a – i . 4a – i were reacted with 2 equiv of NaN₃ in t‐butanol/water (1:2) and add catalytic amount of CuSO₄.5H₂O. Stir the reaction mixture at room temperature to get the target products 5a – i . Here, obtained products contain four rings, that is, one indole, two triazoles, and one benzimidazole. The main advantages of this method are short reaction times, easy workup, higher yields (88–92%), and no by‐products formation.     

A two‐dimensional cadmium(II) coordination polymer constructed from 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate and 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate ligands

Crystals of poly[[aqua[μ₃‐4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylato‐κ⁵O¹O^1′:N³,O⁴:O⁵][μ₄‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ⁷N³,O⁴:O⁴,O^4′:O¹,O^1′:O¹]cadmium(II)] monohydrate], {[Cd₂(C₁₅H₁₄N₂O₄)(C₁₆H₁₄N₂O₆)(H₂O)]·H₂O}_n or {[Cd₂(Hcpimda)(cpima)(H₂O)]·H₂O}_n, (I), were obtained from 1‐(4‐carboxybenzyl)‐2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃cpimda) and cadmium(II) chloride under hydrothermal conditions. The structure indicates that in‐situ decarboxylation of H₃cpimda occurred during the synthesis process. The asymmetric unit consists of two Cd²⁺ centres, one 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate (Hcpimda²⁻) anion, one 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate (cpima²⁻) anion, one coordinated water molecule and one lattice water molecule. One Cd²⁺ centre, i.e. Cd1, is hexacoordinated and displays a slightly distorted octahedral CdN₂O₄ geometry. The other Cd centre, i.e. Cd2, is coordinated by seven O atoms originating from one Hcpimda²⁻ ligand and three cpima²⁻ ligands. This Cd²⁺ centre can be described as having a distorted capped octahedral coordination geometry. Two carboxylate groups of the benzoate moieties of two cpima²⁻ ligands bridge between Cd2 centres to generate [Cd₂O₂] units, which are further linked by two cpima²⁻ ligands to produce one‐dimensional (1D) infinite chains based around large 26‐membered rings. Meanwhile, adjacent Cd1 centres are linked by Hcpimda²⁻ ligands to generate 1D zigzag chains. The two types of chains are linked through a μ₂‐η² bidentate bridging mode from an O atom of an imidazole carboxylate unit of cpima²⁻ to give a two‐dimensional (2D) coordination polymer. The simplified 2D net structure can be described as a 3,6‐coordinated net which has a (4³)₂(4⁶.6⁶.8³) topology. Furthermore, the FT–IR spectroscopic properties, photoluminescence properties, powder X‐ray diffraction (PXRD) pattern and thermogravimetric behaviour of the polymer have been investigated.     

A new two‐dimensional managnese(II) coordination polymer constructed by 2,2′‐(1,2‐phenylene)bis(1H‐imidazole‐4,5‐dicarboxylate)

In recent years, N‐heterocyclic carboxylate ligands have attracted much interest in the preparation of new coordination polymers since they contain N‐atom donors, as well as O‐atom donors, and have a rich variety of coordination modes which can lead to polymers with intriguing structures and interesting properties. A new two‐dimensional coordination polymer, namely poly[[μ₃‐2,2′‐(1,2‐phenylene)bis(4‐carboxy‐1H‐imidazole‐5‐carboxylato)‐κ⁶O⁴,N³,N^3′,O^4′:O⁵:O^5′]manganese(II)], [Mn(C₁₆H₈N₄O₈)]_n or [Mn(H₄Phbidc)]_n, has been synthesized by the reaction of Mn(OAc)₂·4H₂O (OAc is acetate) with 2,2′‐(1,2‐phenylene)bis(1H‐imidazole‐4,5‐dicarboxylic acid) (H₆Phbidc) under solvothermal conditions. In the polymer, each Mn^II ion is six‐coordinated by two N atoms from one H₄Phbidc²⁻ ligand and by four O atoms from three H₄Phbidc²⁻ ligands, forming a significantly distorted octahedral MnN₂O₄ coordination geometry. The Mn^II ions are linked by hexadentate H₄Phbidc²⁻ ligands, leading to a two‐dimensional structure parallel to the ac plane. In the crystal, adjacent layers are further connected by N—H…O hydrogen bonds, forming a three‐dimensional structure in the solid state.     

Color‐Tunable Solid‐State Fluorescence Emission from Carbazole‐Based BODIPYs

Several carbazole‐based boron dipyrromethene (BODIPY) dyes were synthesized by organometallic approaches. Thiazole, benzothiazole, imidazole, benzimidazole, triazole, and indolone substituents were introduced at the 1‐position of the carbazole moiety, and boron complexation of each dipyrrin generated the corresponding compounds 1 , 2 a , and 3 – 6 . The properties of these products were investigated by UV/Vis and fluorescence spectroscopy, cyclic voltammetry, X‐ray crystallography, and DFT calculations. These compounds exhibited large Stokes shifts, and compounds 1 , 2 a , and 3 – 5 fluoresced both in solution and in the solid state. Complex 2 a showed the highest fluorescence quantum yield (Φ_F) in the solid state, therefore boron complexes of the carbazole–benzothiazole hybrids 2 b – f , which had several different substituents, were prepared and the effects of the substituents on the photophysical properties of the compounds were examined. The fluorescence properties showed good correlation with the results of crystal‐packing analyses, and the dyes exhibited color‐tunable solid‐state fluorescence.     

Synthesis of Optically Active 1‐(1‐Phenylethyl)‐1H‐imidazoles Derived from 1‐Phenylethylamine

The three‐component reaction of (R)‐ or (S)‐1‐phenylethylamine ( 6 ), formaldehyde, and an α‐(hydroxyimino) ketone 5 , i.e., 3‐(hydroxyimino)butan‐2‐one ( 5a ) or 2‐(hydroxyimino)‐1,2‐diphenylethanone ( 5b ), yields the corresponding enantiomerically pure 1‐(1‐phenylethyl)‐1H‐imidazole 3‐oxide 7 in high yield (Schemes 2 and 3). The reactions are carried out either in MeOH or in AcOH. Smooth transformations of the N‐oxides into optically active 1‐(1‐phenylethyl)‐1H‐imidazoles 10 and 2,3‐dihydro‐1‐(1‐phenylethyl)‐1H‐imidazole‐2‐thiones 11 are achieved by treatment of 7 with Raney‐Ni and 2,2,4,4‐tetramethyl‐3‐thioxocyclobutanone ( 12 ), respectively (Scheme 4).     

New Organic Dye Based on a 3,6‐Disubstituted Carbazole Donor for Efficient Dye‐Sensitized Solar Cells

We have synthesized and characterized four organic dyes ( 9 , 10 , H1 , H2 ) based on a 3,6‐disubstituted carbazole donor as sensitizers in dye‐sensitized solar cells. These dyes have high molar extinction coefficients and energy levels suitable for electron transfer from an electrolyte to nanocrystalline TiO₂ particles. Under standard air mass 1.5 global (AM 1.5 G) solar irradiation, a device using dye H4 exhibits a short‐circuit current density (J_sc) of 13.7 mA cm^?2, an open‐circuit voltage (V_oc) of 0.68 V, a fill factor (FF) of 0.70, and a calculated efficiency of 6.52 %. This performance is comparable to that of a reference cell based on N719 (7.30 %) under the same conditions. After 1000 hours of visible‐light soaking at 60 °C, the overall efficiency remained at 95 % of the initial value.     

Dye‐Sensitized Solar Cells Based on a Donor–Acceptor System with a Pyridine Cation as an Electron‐Withdrawing Anchoring Group

New hemicyanine dyes ( CM101 , CM102 , CM103 , and CM104 ) in which tetrahydroquinoline derivatives are used as electron donors and N‐(carboxymethyl)‐pyridinium is used as an electron acceptor and anchoring group were designed and synthesized for dye‐sensitized solar cells (DSSCs). Compared with corresponding dyes that have cyanoacetic acid as the acceptor, N‐(carboxymethyl)‐pyridinium has a stronger electron‐withdrawing ability, which causes the absorption maximum of dyes to be redshifted. The photovoltaic performance of the DSSCs based on dyes CM101 – CM104 markedly depends on the molecular structures of the dyes in terms of the n‐hexyl chains and methoxyl. The device sensitized by dye CM104 achieved the best conversion efficiency of 7.0 % (J_sc=13.4 mA cm^?2, V_oc=704 mV, FF=74.8 %) under AM 1.5 irradiation (100 mW cm^?2). In contrast, the device sensitized by reference dye CMR104 with the same donor but the cyanoacetic acid as the acceptor gave an efficiency of 3.4 % (J_sc=6.2 mA cm^?2, V_oc=730 mV, FF=74.8 %). Under the same conditions, the cell fabricated with N719 sensitized porous TiO₂ exhibited an efficiency of 7.9 % (J_sc=15.4 mA cm^?2, V_oc=723 mV, FF=72.3 %). The dyes CM101 – CM104 show a broader spectral response compared with the reference dyes CMR101 – CMR104 and have high IPCE exceeding 90 % from 450 to 580 nm. Considering the reflection of sunlight, the photoelectric conversion efficiency could be almost 100 % during this region.     

4‐Phenyl‐1H‐imidazole (a low‐temperature redetermination), 1‐benzyl‐1H‐imidazole and 1‐mesityl‐1H‐imidazole

Low‐temperature studies of the simple variously substituted imidazole types 4‐phenyl‐1H‐imidazole, C₉H₈N₂, 1‐benzyl‐1H‐imidazole, C₁₀H₁₀N₂, and 1‐mesityl‐1H‐imidazole, C₁₂H₁₄N₂, extend comparisons between parent imidazole species and their derivatives, the pronounced double‐bond localization opposite the substituted N atom common to simple neutral species being redistributed aromatically on protonation.     

Biphenyl‐ and phenylnaphthalenyl‐substituted 1H‐imidazole‐4,5‐dicarbonitrile catalysts for the coupling reaction of nucleoside methyl phosphonamidites

Crystal structures are reported for three substituted 1H‐imidazole‐4,5‐dicarbonitrile compounds used as catalysts for the coupling reaction of nucleoside methyl phosphonamidites, namely 2‐(3′,5′‐dimethylbiphenyl‐2‐yl)‐1H‐imidazole‐4,5‐dicarbonitrile, C₁₉H₁₄N₄, (I), 2‐(2′,4′,6′‐trimethylbiphenyl‐2‐yl)‐1H‐imidazole‐4,5‐dicarbonitrile, C₂₀H₁₆N₄, (II), and 2‐[8‐(3,5‐dimethylphenyl)naphthalen‐1‐yl]‐1H‐imidazole‐4,5‐dicarbonitrile, C₂₃H₁₆N₄, (III). The asymmetric unit of (I) contains two independent molecules with similar conformations. There is steric repulsion between the imidazole group and the terminal phenyl group in all three compounds, resulting in the nonplanarity of the molecules. The naphthalene group of (III) shows significant deviation from planarity. The C—N bond lengths in the imidazole rings range from 1.325 (2) to 1.377 (2) Å. The molecules are connected into zigzag chains by intermolecular N—H...N_imidazole [for (I)] or N—H...·N_cyano [for (II) and (III)] hydrogen bonds.     

Synthesis,Physicochemical Properties,and Hydrogen Bonding of 4(5)‐Substituted 1‐H‐Imidazole‐2‐carboxamide,a Potential Universal Reader for DNA Sequencing by Recognition Tunneling

We have developed a chemical reagent that recognizes all naturally occurring DNA bases, a so called universal reader, for DNA sequencing by recognition tunneling in nanopores. 1 The primary requirements for this type of molecules are the ability to form non‐covalent complexes with individual DNA bases and to generate recognizable electronic signatures under an electrical bias. 1‐H‐imidazole‐2‐carboxamide was designed as such a recognition moiety to interact with the DNA bases through hydrogen bonding. In the present study, we first furnished a synthetic route to 1‐H‐imidazole‐2‐carboxamide containing a short ω‐functionalized alkyl chain at its 4(5) position for its attachment to metal and carbon electrodes. The acid dissociation constants of the imidazole‐2‐carboxamide were then determined by UV spectroscopy. The data show that the 1‐H‐imidazole‐2‐carboxamide exists in a neutral form between pH 6–10. Density functional theory (DFT) and NMR studies indicate that the imidazole ring exists in prototropic tautomers. We propose an intramolecular mechanism for tautomerization of 1‐H‐imidazole‐2‐carboxamide. In addition, the imidazole‐2‐carboxamide can self‐associate to form hydrogen bonded dimers. NMR titration found that naturally occurring nucleosides interacted with 1‐H‐imidazole‐2‐carboxamide through hydrogen bonding in a tendency of dG>dC?dT>dA. These studies are indispensable to assisting us in understanding the molecular recognition that takes place in the nanopore where routinely used analytical tools such as NMR and FTIR cannot be conveniently applied.     

Reactivity of Hydroxy and Amino Derivatives of 2‐Phenyl‐1H‐imidazoline and 2‐Phenyl‐1H‐imidazole toward Isocyanates: Synthesis of Appropriate Carbamates and Ureas

Reactivity of 2‐(4‐hydroxyphenyl)‐1H‐imidazoline and 2‐(4‐hydroxyphenyl)‐1H‐imidazole toward substituted phenyl isocyanates was studied. When mentioned imidazoline was treated with 2.5 equiv of substituted phenyl isocyanate, three N,O‐dicarboxamides were prepared (substituents are H, 4‐NO₂, and 4‐CH₃). Subsequently, N,O‐diacetylated 2‐(4‐hydroxyphenyl)‐1H‐imidazoline was prepared and selective deprotection method was developed for preparation of 1‐acetyl‐2‐(4‐hydroxyphenyl)‐1H‐imidazoline using diethylamine in acetone. Six carbamates derived from this imidazoline were then prepared using 1.1 equiv of substituted phenyl isocyanates (substituents are H, 4‐CH₃, 4‐OCH₃, 4‐NO₂, 4‐CN, and 3‐CF₃). Finally, two carbamates were prepared from 2‐(4‐hydroxyphenyl)‐1H‐imidazole (substituents are 4‐NO₂ and 4‐CN). No reactivity to imidazole ring was observed in this case. Eight derivatives were subjected to antimycobacterial screening. Concurrently, reactivity of 2‐(2‐aminophenyl)‐ and 2‐(2‐hydroxyphenyl)‐1H‐imidazole toward aliphatic and aromatic isocyanates was studied. Eight ureas were prepared using equivalent mixture of 2‐(2‐aminophenyl)‐1H‐imidazole and isocyanate (Et, Pr, isoPr, terc‐Bu, Cy, Ph, 4‐CH₃C₆H₄, 4‐CNC₆H₄). Similar attempts to obtain related carbamates from 2‐(2‐hydroxyphenyl)‐1H‐imidazole lead only to three substituted phenyl carbamates (substituents are 4‐CH₃, 4‐NO₂, and 4‐CN). In both cases, no reactivity to imidazole ring was observed again.     

Clay‐supported 2‐phenyl‐1H‐imidazole derivatives for heterogeneous catalysis of Henry reaction

Six derivatives ( 1 , 2 , 3 , 4 , 5 , 6 ) of 2‐phenyl‐1H‐imidazole were tested as catalysts of Henry reaction. Three new ( 4 , 5 , 6 ) 2‐phenyl‐1H‐imidazole derivatives, differently substituted (thio)ureas, were synthesized and determined by ¹H NMR and IR spectroscopy and elemental analysis. Two types of catalysis, homogeneous and heterogeneous, were examined and compared. Clay minerals Ca‐MMT and Cu‐MMT were used as solid supports for heterogeneous catalysis. The best results were obtained using compound 2 under conditions of heterogeneous method D from the point of view of yield and reaction time. J. Heterocyclic Chem., (2011)     

A one‐dimensional lead(II) coordination polymer with terminal and bridging 5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylate ligands

In the coordination polymer catena‐poly[[[diaqua[5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylato‐κ²N³,O⁴]lead(II)]‐μ‐5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylato‐κ³N³,O⁴:N²] dihydrate], {[Pb(C₁₀H₆N₃O₄)(H₂O)₂]·2H₂O}_n, the two 5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylate ligands have different coordination modes, one being terminal and the other bridging. The bridging ligand links Pb^II cations into one‐dimensional coordination polymer chains. The structure is also stabilized by intra‐ and interchain π–π stacking interactions between the pyridine rings, resulting in the formation of a two‐dimensional network. Extensive hydrogen‐bonding interactions lead to the formation of a three‐dimensional supramolecular network.     

Reaction of 2,3‐Dichloro‐1,4‐Naphthoquinone with 1‐Phenylbiguanide and 2‐Guanidinebenzimidazole

When 2,3‐dichloro‐1,4‐naphthoquinone (DCHNQ) ( 1 ) is allowed to react with 1‐phenylbiguanide (PBG) ( 2 ), 4‐chloro‐2,5‐dihydro‐2,5‐dioxonaphtho[1,2‐d]imidazole‐3‐carboxylic acid phenyl amide ( 4 ), 6‐chloro‐8‐phenylamino‐9H‐7,9,11‐triaza‐cyclohepta[a]naphthalene‐5,10‐dione ( 5 ) and 4‐dimethyl‐amino‐5,10‐dioxo‐2‐phenylimino‐5,10‐dihydro‐2H‐benzo[g]quinazoline‐1‐carboxylic acid amide ( 6 ) were obtained. While on reacting 1 with 2‐guanidinebenzimidazole (GBI) ( 3 ) the products are 3‐(1H‐benzoimidazol‐2‐yl)‐4‐chloro‐3H‐naphtho[1,2‐d]imidazole‐2,5‐dione ( 7 ) and 3‐[3‐(1H‐benzoimidazol‐2‐yl)‐ureido]‐1,4‐dioxo‐1,4‐dihydronaphthalene‐2‐carboxylic acid dimethylamide ( 8 ).     

Synthesis of Bis(imidazole‐2‐thion‐4‐yl)phosphanes

Novel bis(imidazole‐2‐thion‐4‐yl)‐ phosphanes ( 2a–d ) were synthesized via lithiation of the precursor imidazole‐2‐thiones followed by the phosphanylation reaction. Oxidation of bis(imidazole‐2‐thion‐4‐yl)phosphane 2b–d with elemental sulfur and selenium led selectively and in good yields to the P‐thio ( 3b–d ) and P‐seleno ( 4c ) derivatives of bis(imidazole‐2‐thion‐4‐yl)phosphanes, respectively. The treatment of 2a,c with phosphorus trichloride gives the corresponding P‐chloro derivatives 5a,c . These compounds were unambiguously characterized by elemental analyses, spectroscopic and spectrometric methods, in addition by single‐crystal X‐ray structure analysis in the case of 2d . © 2012 Wiley Periodicals, Inc. Heteroatom Chem 00:1–7, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21043     

Synthesis of Imidazole Derivatives Using 2‐Unsubstituted 1H‐Imidazole 3‐Oxides

The reaction of 1,4,5‐trisubstituted 1H‐imidazole 3‐oxides 1 with Ac₂O in CH₂Cl₂ at 0 – 5° leads to the corresponding 1,3‐dihydro‐2H‐imidazol‐2‐ones 4 in good yields. In refluxing Ac₂O, the N‐oxides 1 are transformed to N‐acetylated 1,3‐dihydro‐2H‐imidazol‐2‐ones 5 . The proposed mechanisms for these reactions are analogous to those for N‐oxides of 6‐membered heterocycles (Scheme 2). A smooth synthesis of 1H‐imidazole‐2‐carbonitriles 2 starting with 1 is achieved by treatment with trimethylsilanecarbonitrile (Me₃SiCN) in CH₂Cl₂ at 0 – 5° (Scheme 3).