Synthesis and Applications of Silyl 2‐Methylprop‐2‐ene‐1‐sulfinates in Preparative Silylation and GC‐Derivatization Reactions of Polyols and Carbohydrates

Trimethylsilyl, triethylsilyl, tert‐butyldimethylsilyl, and triisopropylsilyl 2‐methylprop‐2‐ene‐1‐sulfinates were prepared through (CuOTf)₂?C₆H₆‐catalyzed sila‐ene reactions of the corresponding methallylsilanes with SO₂ at 50 °C. Sterically hindered, epimerizable, and base‐sensitive alcohols gave the corresponding silyl ethers in high yields and purities at room temperature and under neutral conditions. As the byproducts of the silylation reaction (SO₂+isobutylene) are volatile, the workup was simplified to solvent evaporation. The developed method can be employed for the chemo‐ and regioselective semiprotection of polyols and glycosides and for the silylation of unstable aldols. The high reactivity of the developed reagents is shown by the synthesis of sterically hindered per‐O‐tert‐butyldimethylsilyl‐α‐d ‐glucopyranose, the X‐ray crystallographic analysis of which is the first for a per‐O‐silylated hexopyranose. The per‐O‐silylation of polyols, hydroxy carboxylic acids, and carbohydrates with trimethylsilyl 2‐methylprop‐2‐ene‐1‐sulfinate was coupled with the GC analysis of nonvolatile polyhydroxy compounds both qualitatively and quantitatively.     

Retro‐Brook Rearrangement of Ferrocene‐Derived Silyl Ethers

An intramolecular Li–Si exchange was observed on various lithiated ferrocenylbenzyl silyl ethers. The thermodynamically more stable C‐silylated isomers were isolated in good yields and fully characterized. The reaction mechanism of the [1,4] retro‐Brook rearrangement was investigated by DFT calculations. Two distinct reaction routes were proposed and a possible stabilization effect of the ferrocenyl fragment on the C‐silylated isomers was described. The diastereoselective rearrangement of the trimethylsilyl group to the ortho position of the ferrocenyl cyclopentadienyl ring was also accomplished and the absolute configuration of the product was determined.     

Concise Synthesis of Multisubstituted Isoquinolines from Pyridines by Regioselective Diels–Alder Reactions of 2‐Silyl‐3,4‐pyridynes

A four‐step regioselective synthesis of multisubstituted isoquinoline derivatives from 3‐bromopyridines was developed by the Diels–Alder (DA) reactions of 2‐silyl‐3,4‐pyridynes with furans, followed by functional‐group transformations. In particular, the silyl group at the C2‐position of the 3,4‐pyridynes played two important roles: firstly, it functioned as the directing group for the DA reaction, and secondly, it served to introduce diverse substituents at the C1‐position of the isoquinolines by electrophilic ipso‐substitution.     

Synthesis and functionalization of Poly[5,5′‐(silylene)‐2,2′‐dithienylene]s using silyl triflate intermediates†

Treatment of 5,5′‐dilithio‐2,2′‐dithiophene with (dimethylamino)methylsily bis(triflate)‐ or α, ω‐bis(triflate)‐substituted trisilanes gave poly[5,5′‐(silylene)‐2,2′‐dithienylene]s in high yields. The amino–silyl bond was cleaved selectively by triflic acid, leading to triflate‐substituted derivatives. Conversion of these compounds with nucleophiles gave other functionalized polymers. Platinum‐catalyzed hydrosilylation reactions between silicon–vinyl and silicon–hydrogen derivatives result in polymer networks which may serve as interesting preceramic materials. The structures of the polymers were proven by NMR spectroscopy (²⁹Si, ¹³C, ¹H). Results of thermal gravimetric analysis (TGA), UV spectrometry and conductivity measurements are given. Copyright © 1999 John Wiley & Sons, Ltd.     

Vanadium(V)‐Induced Oxidative Cross‐Coupling of Various Boron and Silyl Enolates

Intermolecular oxidative cross‐coupling of two different enolates is one of the most useful reactions to synthesize unsymmetrical 1,4‐dicarbonyl compounds. In this study, the oxovanadium(V)‐induced intermolecular oxidative cross‐coupling of enolates afforded unsymmetrical 1,4‐dicarbonyl compounds. Various boron and silyl enolates underwent the formation of ketone–ester, ester–ketone, ester–ester, amide–ketone and amide–ester coupling products . These results clearly show the versatility of the present oxidative cross‐coupling protocol.     

[1,4]‐S‐ to O‐Silyl Migration: Multicomponent Synthesis of α‐Thioketones through Chemoselective Transformation of Esters to Ketones with Organolithium Reagents

A [1,4]‐S‐ to O‐silyl migration has been exploited to chemoselectively transform esters into ketones by using organolithium reagents, allowing multicomponent synthesis of α‐thioketones. Mechanistic studies reveal that this migration proceeds in an intramolecular manner and is more favorable than the corresponding [1,5]‐S‐ to O‐ and [1,3]‐C‐ to O‐silyl migrations. The resulting α‐thioketones are valuable building blocks for the synthesis of cyclic or multifunctionalized organosulfur compounds.     

Enantioselective Addition of Cyclic Enol Silyl Ethers to 2‐Alkenoyl‐Pyridine‐N‐Oxides Catalysed by CuII–Bis(oxazoline) Complexes

Asymmetric reactions involving (E)‐3‐aryl‐1‐(pyridin‐2‐yl‐N‐oxide)prop‐2‐en‐1‐ones and cyclic enol silyl ethers show good yields and excellent enantioselectivities (up to 99.9 % ee) when catalysed by bis(oxazoline)–Cu^II complexes. Different reaction pathways can be followed by different enol silyl ethers: with 2‐(trimethylsilyloxy)furan, a Mukaiyama–Michael adduct is obtained, whereas a hetero Diels–Alder cycloadduct was formed by using (1,2‐dihydronaphthalen‐4‐yloxy)trimethylsilane. In the latter reaction, the absolute configuration of the product is consistent with a reagent approach to the less hindered Re face of the coordinated substrate in the reactive complex.     

Titanocene‐Mediated Homolytic Opening of Epoxysilanes

The titanocene(III) chloride mediated opening of silyloxiranes has been examined. Electron transfer from the metal leads to α‐silyl radicals with total regiocontrol. The radicals could be trapped by various olefins, and the corresponding adducts were obtained in good yields (Table). Further substitution of the oxirane by alkyl groups proved detrimental to the reactions, but ring opening remained essentially regioselective.     

Gold(I)‐Catalyzed Rearrangement of 3‐Silyloxy‐1,5‐enynes: An Efficient Synthesis of Benzo[b]thiophenes,Dibenzothiophenes, Dibenzofurans,and Indole Derivatives

With the IPr ligand (IPr=1,3‐bis‐(2,6‐diisopropylphenyl)imidazol‐2‐ylidene) on gold(I) excellent yields in the benzanellation of 2‐substituted thiophenes, benzothiophenes, pyrroles, benzofurans, and indoles were achieved. The 1‐siloxybut‐3‐ynyl side chains, incorporated in the anellation, are easily accessible by the addition of a propargyl metal reagent to a formyl group and silylation of the alcohol. This conveniently allows an anellation at the position of the formyl group under mild conditions. All reactions involve a 2,3‐shift of the side chain in the anellation step and thus, provide an easy access to specific substitution patterns. Only in the case of 2‐substituted indoles with their highly nucleophilic 3‐position a direct hydroarylation without shift is observed. On the other hand, 3‐substituted indoles give the same products as 2‐substituted indoles. Then, a 3,2‐shift in the indole ring system has to be involved.     

Preparation and Regioselective Metalation of Bis(trimethylsilyl)methyl‐Substituted Aryl Derivatives

A range of bis(trimethylsilyl)methyl‐substituted aryl derivatives was prepared by using a Kumada–Corriu cross‐coupling reaction. The regioselective metalation of the resulting bis(trimethylsilyl)methyl‐substituted aryl derivatives bearing this bulky silyl group allowed the generation of functionalized aromatics. A regioselective switch in the presence or in the absence of the bis(trimethylsilyl)methyl group has been demonstrated. Furthermore, this silyl group was converted into a formyl group or a styryl group, enhancing the scope of application of such bis(trimethylsilyl)methyl‐substituted arenes.     

Silyl‐functionalized polyolefins via co‐polymerization of vinylsilanes with ethylene or propylene catalyzed by group IV metallocene complexes

Vinylsilanes CH₂CHSiR₃ (R = Me, NMe₂, OMe, OTMS) copolymerize with ethylene rapidly in the presence of catalytic amounts of [Cp′₂ZrMe][MeB(C₆F₅)₃] (Cp′ = η⁵‐C₅Me₅) ( I ) to give high molecular weight silyl‐functionalized polyethylene. The molecular weight of the polymer can be controlled by varying the comonomer concentration as well as the reaction temperature. Relatively low molecular weight polymer was produced at a higher silyl monomer concentration and a higher polymerization temperature. The incorporation of silyl monomer in the polymer is in the range of 0.1‐ 6.0%. On the other hands, catalysts [Cp₂ZrMe][MeB(C₆F₅)₃] (Cp′ = η⁵‐C₅H₅) ( II ) and [Cp″₂ZrMe][MeB(C₆F₅)₃] (Cp″ = η⁵‐1,2‐C₅Me₂H₃) ( III ) show much lower activity. With the use of more coordinatively unsaturated constrained geometry catalysts (CGC), Me₂Si(η⁵‐C₅Me₄)(N^tBu)MMe][MeB(C₆F₅)₃] ( IV , M = Zr; V , M = Ti), the silyl monomer incorporation in the polymer was increased to 40%. The Ti catalyst is more active and produces polymer with a higher molecular weight with a higher silyl monomer incorporation at 23 °C. The copolymerization of vinyltrimethylsilane with propylene was also investigated with these catalysts, yielding high silyl‐functionalized propylene copolymer/oligmer. The microstructure of the copolymers/oligomers has been thoroughly investigated by 1D and 2D NMR techniques (¹H, ¹³C, NOE, DEPT, HETCOR, and FLOCK). The results show that the backbone of the copolymers/oligomers is essentially random. Several termination pathways have been identified. In particular, two unsaturated silyl terminations, cis and/or trans‐TMS CHCH , were identified with the constrained geometry catalysts. Their formation was rationalized based on transition state models. It was found that occasional 1,2‐insertion of either propylene or vinyltrimethylsilane into the chain propagation process has a high probability serving as the trigger for polymer chain termination via β‐H elimination. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1308–1321     

Synthesis of β‐Keto Sulfones by a Catalyst‐Free Reaction of Aryldiazonium Tetrafluoroborates,Sulfur Dioxide,and Silyl Enol Ethers

A green approach for the generation of β‐keto sulfones through a reaction of aryldiazonium tetrafluoroborates and sulfur dioxide with silyl enol ether under catalyst‐ and additive‐free conditions has been realized. This reaction proceeds efficiently at room temperature and goes to completion in half an hour. During the reaction process, aryldiazonium tetrafluoroborate is treated with DABCO ⋅ (SO₂)₂ (DABCO=1,4‐diazabicyclo[2.2.2]octane) to provide a sulfonyl radical as the key intermediate, which then initiates the transformation. Oxidants or metal catalysts are avoided, and the presence of DABCO also plays an important role in the reaction.     

固相合成甲胺基阿维菌素苯甲酸盐

To implement the solid phase synthesis of 4““-epi-methylamino-4““-deoxyavermecfin B1 benzoate, tert-butyldimethylsilylchloride was chosen for the first solution synthesis. Then a novel silyl chloride resin 1, achieved from hydroxymethyl polystyrene resin and dimethyldichlorosilane, was used successfully for the attachment of avermectin B1 2. Through oxidation, amination formation, cleavage, and benzoate formation, resin bounded avermectin B1 9 gave 4““-epi-methylamino-4““-deoxyavermectin B1 benzoate 3.     

Diastereoselective Synthesis of Pentasubstituted γ‐Butyrolactones from Silyl Glyoxylates and Ketones through a Double Reformatsky Reaction

Three contiguous stereocenters can be established with remarkable diastereoselectivity in a double Reformatsky sequence. Densely functionalized γ‐butyrolactones were assembled rapidly by this approach, in which a ketone is used as the terminal electrophile (see scheme). Secondary transformations of the lactone products enhance their synthetic utility. R¹=Me, H; R²=alkyl, aryl, CF₃; Bn=benzyl, TBS=tert‐butyldimethylsilyl.

     

Isolation and Characterization,Including by X‐ray Crystallography,of Contact and Solvent‐Separated Ion Pairs of Silenyl Lithium Species

Reaction of bromoacylsilane 1 (pink solution) with tBu₂MeSiLi (3.5 equiv) in a 4:1 hexane:THF solvent mixture at ?78 °C to room temperature yields the solvent separated ion pair (SSIP) of silenyl lithium E‐[(tBuMe₂Si)(tBu₂MeSi)C=Si(SiMetBu₂)]^? [Li?4THF]⁺ 2 a (green–blue solution). Removal of the solvent and addition of benzene converts 2 a into the corresponding contact ion pair (CIP) 2 b (violet–red solution) with two THF molecules bonded to the lithium atom. The 2 a ? 2 b interconversion is reversible upon THF? benzene solvent change. Both 2 a and 2 b were characterized by X‐ray crystallography, NMR and UV/Vis spectroscopy, and theoretical calculations. The degree of dissociation of the Si?Li bond has a large effect on the visible spectrum (and thus color) and on the silenylic ²⁹Si NMR chemical shift, but a small effect on the molecular structure. This is the first report of the X‐ray molecular structure of both the SSIP and the CIP of any R₂E=E′RM species (E=C, Si; E′=C, Si; M=metal).     

Sila‐ and Germacarboxylic Acids: Precursors for the Corresponding Silyl and Germyl Radicals

Silicon‐containing compounds are widely used as synthetic building blocks, functional materials, and bioactive reagents. In particular, silyl radicals are important intermediates for the synthesis and transformation of organosilicon compounds. Herein, we describe the first protocol for the generation of silyl radicals by photoinduced decarboxylation of silacarboxylic acids, which can be easily prepared in high yield on a gram scale and are very stable to air and moisture. Irradiation of silacarboxylic acids with blue LEDs (455 nm) in the presence of a commercially available photocatalyst releases silyl radicals, which can further react with various alkenes to give the corresponding silylated products in good‐to‐high yields with broad functional‐group compatibility. This reaction proceeds in the presence of water, enabling efficient deuterosilylation of alkenes with D₂O as the deuterium source. Germyl radicals were similarly obtained.     

Si-H, P-H 和 S-H 键离解能Alfa取代基效应研究

CBS-Q and G3 methods were used to generate a large number of reliable Si--H, P---H and S--H bond dissociation energies （BDEs） for the first time. It was found that the Si--H BDE displayed dramatically different substituent effects compared with the C--H BDE. On the other hand, the P---H and S--H BDE exhibited patterns of substituent effects similar to those of the N--H and O--H BDE. Further analysis indicated that increasing the positive charge on Si of XSiH3 would strengthen the Si--H bond whereas increasing the positive charge on P and S of XPH2 and XSH would weaken the P---H and S--H bonds. Meanwhile, increasing the positive charge on Si of XSiH2^＋ stabilized the silyl radical whereas increasing the positive charge on P and S in XPH＂ and XS＊ destabilized P- and S-centered radicals. These behaviors could be reasonalized by the fact that Si is less electronegative than H while P and S are not. Finally, it was demonstrated that the spin-delocalization effect was valid for the Si-, P- and S-centered radicals.     

Activation of Carbon Dioxide by Silyl Triflate‐Based Frustrated Lewis Pairs

Silyl triflates of the form R_4?nSi(OTf)_n (n=1, 2; OTf=OSO₃CF₃) are shown to activate carbon dioxide when paired with bulky alkyl‐substituted Group 15 bases. Combinations of silyl triflates and 2,2,6,6‐tetramethylpiperidine react with CO₂ to afford silyl carbamates via a frustrated Lewis pair‐type mechanism. With trialkylphosphines, the silyl triflates R₃Si(OTf) reversibly bind CO₂ affording [R′₃P(CO₂)SiR₃][OTf] whereas when Ph₂Si(OTf)₂ is used one or two molecules of CO₂ can be sequestered. The latter bis‐CO₂ product is favoured at low temperatures and by excess phosphine.