Isomeric Squaraine‐Based [2]Pseudorotaxanes and [2]Rotaxanes: Synthesis,Optical Properties,and Their Tubular Structures in the Solid State

On the basis of formation of [2]pseudorotaxane complexes between triptycene‐derived tetralactam macrocycles 1 a and 1 b and squaraine dyes, construction of squaraine‐based [2]rotaxanes through clipping reactions were studied in detail. As a result, when two symmetrical squaraines 2 d and 2 e were utilized as templates, two pairs of isomeric [2]rotaxanes 3 a – b and 4 a – b as diastereomers were obtained, owing to the two possible linking modes of triptycene derivatives. It was also found, interestingly, that when a nonsymmetrical dye 2 g was involved, there existed simultaneously three isomers of [2]rotaxanes in one reaction due to the different directions of the guest threading. The ¹H NMR and 2D NOESY NMR spectra were used to distinguish the isomers, and the yield of [2]rotaxane 5 a with the benzyl group in the wider rim of the host 1 a was found to be higher than that of another isomer 5 b with an opposite direction of the guest, which indicated the partial selection of the threading direction. The X‐ray structures of 3 b and 4 a showed that, except for the standard hydrogen bonds between the amide protons of the hosts and the carbonyl oxygen atoms of the guests, multiple π???π stacking and C? H???π interactions between triptycene subunits and aromatic rings of the guests also participated in the complexation. Crystallographic studies also revealed that the [2]rotaxane molecules 3 b and 4 a further self‐assembled into tubular structures in the solid state with the squaraine dyes inside the channels. In the case of 4 a , all the nonsymmetrical macrocyclic molecules pointed in one direction, which suggests the formation of oriented tubular structures. Moreover, it was also found that the squaraines encapsulated in the triptycene‐derived macrocycles were protected from chemical attack, and subsequently have potential applications in imaging probes and other biomedical areas.     

Acid‐Base Switchable [2]‐ and [3]Rotaxane Molecular Shuttles with Benzimidazolium and Bis(pyridinium) Recognition Sites

For the purpose of developing higher level mechanically interlocked molecules (MIMs), such as molecular switches and machines, a new rotaxane system was designed in which both the 1,2‐bis(pyridinium)ethane and benzimidazolium recognition templating motifs were combined. These two very different recognition sites were successfully incorporated into [2]rotaxane and [3]rotaxane molecular shuttles which were fully characterized by ¹H NMR, 2D EXSY, single‐crystal X‐ray diffraction and VT NMR analysis. By utilizing benzimidazolium as both a recognition site and stoppering group it was possible to create not only an acid/base switchable [2]rotaxane molecular shuttle (energy barrier 20.9 kcal?mol^?1) but also a [3]rotaxane molecular shuttle that displays unique dynamic behavior involving the simultaneous motion of two macrocyclic wheels on a single dumbbell. This study provides new insights into the design of switchable molecular shuttles. Due to the unique properties of benzimidazoles, such as fluorescence and metal coordination, this new type of molecular shuttle may find further applications in developing functional molecular machines and materials.     

Four‐State Molecular Shuttling of [2]Rotaxanes in Response to Acid/Base and Alkali‐Metal Cation Stimuli

In this study, we synthesized [2]rotaxanes possessing three recognition sites—a dialkylammonium, an alkylarylamine, and a tetra(ethylene glycol) stations—in their dumbbell‐like axle component and dibenzo[24]crown‐8 (DB24C8) as their macrocyclic component. These [2]rotaxanes behaved as four‐state molecular shuttles: i) under acidic conditions, the DB24C8 unit encircled both the dialkylammonium and alkylarylammonium stations; ii) under neutral conditions, the dialkylammonium unit was the predominant station for the DB24C8 component; iii) under basic conditions, when both ammonium centers were deprotonated, the alkylarylamine unit became a suitable station for the DB24C8 component; and iv) under basic conditions in the presence of an alkali‐metal cation, the tetra(ethylene glycol) unit recognized the DB24C8 component through cooperative binding of the alkali‐metal ion. In addition, we observed that the [2]rotaxanes exhibited selective recognition for metal cations. These shuttling motions of the macrocyclic component proceeded reversibly.     

β‐Substituted Terthiophene [2]Rotaxanes

Towards polythiophene polyrotaxanes : The β‐substituted terthiophene [2]rotaxanes have been synthesized (see figure). Basic optical and electrochemical properties of the synthesized [2]rotaxanes are also reported.

     

Synthesis of a pH‐Sensitive Hetero[4]Rotaxane Molecular Machine that Combines [c2]Daisy and [2]Rotaxane Arrangements

The synthesis of a novel pH‐sensitive hetero[4]rotaxane molecular machine through a self‐sorting strategy is reported. The original tetra‐interlocked molecular architecture combines a [c2]daisy chain scaffold linked to two [2]rotaxane units. Actuation of the system through pH variation is possible thanks to the specific interactions of the dibenzo‐24‐crown‐8 (DB24C8) macrocycles for ammonium, anilinium, and triazolium molecular stations. Selective deprotonation of the anilinium moieties triggers shuttling of the unsubstituted DB24C8 along the [2]rotaxane units.     

A pH‐Dependent,Mechanically Interlocked Switch: Organometallic [2]Rotaxane vs. Organic [3]Rotaxane

We present the first [2]rotaxane featuring a functional organometallic host. In contrast to the known organic scaffolds, this assembly shows a high post‐synthetic modifiability. The reactivity of the Ag₈ pillarplex host is fully retained, as is exemplified by the first transmetalation in a rotaxane framework to provide the respective Au₈ analogue. Additionally, a transformation under acidic conditions to give a purely organic [3]rotaxane is demonstrated which is reversible upon addition of a suitable base, rendering the assembly a pH‐dependent switch. Hereby, it is shown that the mechanically interlocked nature of the system enhances the kinetic stability of the NHC host complex by a factor of >1000 and corresponds to the first observation of a stabilizing “rotaxand effect”.     

Ground‐State Equilibrium Thermodynamics and Switching Kinetics of Bistable [2]Rotaxanes Switched in Solution,Polymer Gels,and Molecular Electronic Devices

We report on the kinetics and ground‐state thermodynamics associated with electrochemically driven molecular mechanical switching of three bistable [2]rotaxanes in acetonitrile solution, polymer electrolyte gels, and molecular‐switch tunnel junctions (MSTJs). For all rotaxanes a π‐electron‐deficient cyclobis(paraquat‐p‐phenylene) (CBPQT⁴⁺) ring component encircles one of two recognition sites within a dumbbell component. Two rotaxanes (RATTF⁴⁺ and RTTF⁴⁺) contain tetrathiafulvalene (TTF) and 1,5‐dioxynaphthalene (DNP) recognition units, but different hydrophilic stoppers. For these rotaxanes, the CBPQT⁴⁺ ring encircles predominantly (>90 %) the TTF unit at equilibrium, and this equilibrium is relatively temperature independent. In the third rotaxane (RBPTTF⁴⁺), the TTF unit is replaced by a π‐extended analogue (a bispyrrolotetrathiafulvalene (BPTTF) unit), and the CBPQT⁴⁺ ring encircles almost equally both recognition sites at equilibrium. This equilibrium exhibits strong temperature dependence. These thermodynamic differences were rationalized by reference to binding constants obtained by isothermal titration calorimetry for the complexation of model guests by the CBPQT⁴⁺ host in acetonitrile. For all bistable rotaxanes, oxidation of the TTF (BPTTF) unit is accompanied by movement of the CBPQT⁴⁺ ring to the DNP site. Reduction back to TTF⁰ (BPTTF⁰) is followed by relaxation to the equilibrium distribution of translational isomers. The relaxation kinetics are strongly environmentally dependent, yet consistent with a single electromechanical‐switching mechanism in acetonitrile, polymer electrolyte gels, and MSTJs. The ground‐state equilibrium properties of all three bistable [2]rotaxanes were reflective of molecular structure in all environments. These results provide direct evidence for the control by molecular structure of the electronic properties exhibited by the MSTJs.     

Active Esters as Pseudostoppers for Slippage Synthesis of [2]Pseudorotaxane Building Blocks: A Straightforward Route to Multi‐Interlocked Molecular Machines

The efficient synthesis and very easy isolation of dibenzo[24]crown‐8‐based [2]pseudorotaxane building blocks that contain an active ester motif at the extremity of the encircled molecular axle and an ammonium moiety as a template for the dibenzo[24]crown‐8 is reported. The active ester acts both as a semistopper for the [2]pseudorotaxane species and as an extensible extremity. Among the various investigated active ester moieties, those that allow for the slippage process are given particular focus because this strategy produces fewer side products. Extension of the selected N‐hydroxysuccinimide ester based pseudorotaxane building block by using either a mono‐ or a diamino compound, both containing a triazolium moiety, is also described. These provide a pH‐dependent two‐station [2]rotaxane molecular machine and a palindromic [3]rotaxane molecular machine, respectively. Molecular machinery on both interlocked compounds through variation of pH was studied and characterized by means of NMR spectroscopy.     

Light‐Switchable Janus [2]Rotaxanes Based on α‐Cyclodextrin Derivatives Bearing Two Recognition Sites Linked with Oligo(ethylene glycol)

Two Janus [2]rotaxanes, 5a and 5b , with α‐cyclodextrin (α‐CD) derivatives substituted on the 6‐position with two recognition sites (azobenzene and heptamethylene (C7)) that were linked with linkers of different lengths (oligo(ethylene glycol) with a degree of polymerization equal to 2 or approximately 21) were synthesized and characterized. 2D ROESY NMR spectroscopy and circular dichroism (cd) spectra demonstrated that the recognition site of the α‐CD moiety was switched by photoisomerization of the azobenzene moiety in 5a and 5b . The different size changes of 5a and 5b in hydrodynamic radius (R_H) owing to the different length of linker between two recognition sites were observed by pulse‐field‐gradient spin‐echo NMR spectroscopy. The kinetic results indicated that the different length of linker had no or a weak effect for the photoisomerization process of 5a and 5b .     

A Two‐Stage Molecular Retractable Cable Featuring Push‐Button and Rotary Two‐Way Switching Modes

A molecular cage based [2]rotaxane is reported in which the linear thread component can be elongated and contracted in a stepwise manner, mimicking a two‐stage retractable cable that can be operated in both push‐button (free‐selection) and rotary (continuous‐change) modes, depending on the choice of reagents.     

Controllable donor-acceptor neutral [2]rotaxanes

In pursuit of a neutral bistable [2]rotaxane made up of two tetraarylmethane stoppers--both carrying one isopropyl and two tert-butyl groups located at the para positions on each of three of the four aryl rings--known to permit the slippage of the pi-electron-donating 1,5-dinaphtho[38]crown-10 (1/5DNP38C10) at the thermodynamic instigation of pi-electron-accepting recognition sites, in this case, pyromellitic diimide (PmI) and 1,4,5,8-naphthalenetetracarboxylate diimide (NpI) units separated from each other along the rod section of the rotaxane's dumbbell component, and from the para positions of the fourth aryl group of the two stoppers by pentamethylene chains, a modular approach was employed in the synthesis of the dumbbell-shaped compound NpPmD, as well as of its two degenerate counterparts, one (PmPmD) which contains two PmI units and the other (NpNpD) which contains two NpI units. The bistable [2]rotaxane NpPmR, as well as its two degenerate analogues PmPmR and NpNpR, were obtained from the corresponding dumbbell-shaped compounds NpPmD, PmPmD, and NpNpD and 1/5DNP38C10 by slippage. Dynamic 1H NMR spectroscopy in CD2Cl2 revealed that shuttling of the 1/5DNP38C10 ring occurs in NpNpR and PmPmR, with activation barriers of 277 K of 14.0 and 10.9 kcal mol(-1), respectively, reflecting a much more pronounced donor-acceptor stabilizing interaction involving the NpI units over the PmI ones. The photophysical and electrochemical properties of the three neutral [2]rotaxanes and their dumbbell-shaped precursors have also been investigated in CH2Cl2. Interactions between 1/5DNP38C10 and PmI and NpI units located within the rod section of the dumbbell components of the [2]rotaxane give rise to the appearance of charge-transfer bands, the energies of which correlate with the electron-accepting properties of the two diimide moieties. Comparison between the positions of the visible absorption bands in the three [2]rotaxanes shows that, in NpPmR, the major translational isomer is the one in which 1/5DNP38C10 encircles the NpI unit. Correlations of the reduction potentials for all the compounds studied confirm that, in this non-degenerate [2]rotaxane, one of the translational isomers predominates. Furthermore, after deactivation of the NpI unit by one-electron reduction, the 1/5DNP38C10 macrocycle moves to the PmI unit. Li+ ions have been found to strengthen the interaction between the electron-donating crown ether and the electron-accepting diimide units, particularly the PmI one. Titration experiments show that two Li+ ions are involved in the strengthening of the donor-acceptor interaction. Addition of Li+ ions to NpPmR induces the 1/5DNP38C10 macrocycle to move from the NpI to the PmI unit. The Li+-ion-promoted switching of NpPmR in a 4:1 mixture of CD2Cl2 and CD3COCD3 has also been shown by 1H NMR spectroscopy to involve the mechanical movement of the 1/5DNP38C10 macrocycle from the NpI to the PmI unit, a process that can be reversed by adding an excess of [12]crown-4 to sequester the Li+ ions.     

Increased Halide Recognition Strength by Enhanced Intercomponent Preorganisation in Triazolium Containing [2]Rotaxanes

Three triazolium‐based [2]rotaxanes containing different sized axle and macrocycle components were synthesised in good yields (40–57 %) through chloride anion templation. The anion recognition properties of the interlocked receptor systems were investigated using ¹H NMR titration experiments: all three rotaxanes display impressive selectivities for halide anions over the more basic oxoanion acetate. The rotaxanes incorporating shorter, more rigid axle components with aryl‐substituted triazolium groups display substantially higher anion binding affinities than those with longer, bis‐alkyl‐substituted heterocycles, which is attributed to the increased intercomponent preorganisation afforded by the smaller axle component. Computational DFT and molecular dynamics simulations composed of unconstrained and umbrella sampling simulations corroborate the experimental observations.     

Electron Transfer and Switching in Rigid [2]Rotaxanes Adsorbed on TiO2 Nanoparticles

Bistable [2]rotaxanes have been attached through a bulky tripodal linker to the surface of titanium dioxide nanoparticles and studied by cyclic voltammetry and spectroelectrochemical methods. The axle component in the [2]rotaxane contains two viologen sites, V₁ and V₂, interconnected by a rigid terphenylene bridge. In their parent dication states, V₁²⁺ and V₂²⁺ can both accommodate a crown ether ring, C, but are not equivalent in terms of their affinity towards C and have different electrochemical reduction potentials. The geometry and size of the tripodal linker help to maintain a perpendicular [2]rotaxane orientation at the surface and to avoid unwanted side‐to‐side interactions. When the rigid [2]rotaxane or its corresponding axle are adsorbed on a TiO₂ nanoparticle, viologen V₂²⁺ is reduced at significantly more negative potentials (?0.3 V) than in flexible analogues that contain aliphatic bridges between V₁ and V₂. These overpotentials are analysed in terms of electron‐transfer rates and a donor–bridge–acceptor (D–B–A) formalism, in which D is the doubly reduced viologen, V₁⁰, adjacent to the TiO₂ surface (TiO₂–V₁⁰), B is the terphenylene bridge and A is viologen V₂²⁺. We have also found that, in contrast with earlier findings in solution, no molecular shuttling occurs in rigid [2]rotaxane adsorbed at the surface. The observations were explained by the relative position of the viologen stations within the electrical double layer, screening of V₂²⁺ by the counterions and high capacity of the medium, which reduces the mobility of the crown ether. The results are useful in transposing of solution‐based molecular switches to the interface or in the design and understanding of the properties of systems comprising electroactive and/or interlocked molecules adsorbed at the nanostructured TiO₂ surface.     

A Kinetic Self‐Sorting Approach to Heterocircuit [3]Rotaxanes

In this proof‐of‐concept study, an active‐template coupling is used to demonstrate a novel kinetic self‐sorting process. This process iteratively increases the yield of the target heterocircuit [3]rotaxane product at the expense of other threaded species.     

pH-Triggered dethreading-rethreading and switching of cucurbit[6]uril on bistable [3]pseudorotaxanes and [3]rotaxanes

A series of water-soluble [3]rotaxanes-(n+2) and [3]pseudorotaxanes-(n+2) with short (propyl, n=1) and long (dodecyl, n=10) aliphatic spacers have been prepared in high yields by a 1,3-dipolar cycloaddition reaction catalyzed by cucurbit[6]uril (CB6). The pH-triggered dethreading and rethreading of CB6 on these pseudorotaxanes was monitored by 1H NMR spectroscopy. A previously reported [3]rotaxane-12 that is known to behave as a bistable molecular switch has two recognition sites for CB6, that is, the diaminotriazole moieties and the dodecyl spacer. By changing the pH of the system, it is possible to observe more than one state in the shuttling process. At low pH values both CB6 units are located on the diaminotriazole moieties owing to an ion-dipole interaction, whereas at high pH values both of the CB6 units are located on the hydrophobic dodecyl spacer. Surprisingly, the CB6 units shuttle back to their initial state very slowly after reprotonation of the axle. Even after eighteen days at room temperature, only about 50 % of the CB6 units had relocated back onto the diaminotriazole moieties. The rate constants for the shuttling processes were measured as a function of temperature over the range from 313 to 333 K and the activation parameters (enthalpy, entropy, and free energy) were calculated by using the Eyring equation. The results indicate that this [3]rotaxane behaves as a kinetically controlled molecular switch. The switching properties of [3]rotaxane-3 have also been studied. However, even under extreme pH conditions this rotaxane has not shown any switching action, which confirms that the propyl spacer is too short to accommodate CB6 units.     

High‐Yield Diastereoselective Synthesis of Planar Chiral [2]‐ and [3]Rotaxanes Constructed from per‐Ethylated Pillar[5]arene and Pyridinium Derivatives

Planar chiral [2]‐ and [3]rotaxanes constructed from pillar[5]arenes as wheels and pyridinium derivatives as axles were obtained in high yield using click reactions. The process of rotaxane formation was diastereoselective; the obtained [2]rotaxane was a racemic mixture consisting of (pS, pS, pS, pS, pS) and (pR, pR, pR, pR, pR) forms of the per‐ethylated pillar[5]arene ( C2 ) wheel, and other possible types of the [2]rotaxane did not form. Isolation of the enantiopure [2]rotaxanes with one axle through (pS, pS, pS, pS, pS)‐ C2 or (pR, pR, pR, pR, pR)‐ C2 wheels was accomplished. Furthermore, pillar[5]arene‐based [3]rotaxane was successfully synthesized by attachment of two pseudo [2]rotaxanes onto a bifunctional linker. [3]Rotaxane formed in a 1:2:1 mixture with one axle threaded through two (pS, pS, pS, pS, pS)‐ C2 , one (pS, pS, pS, pS, pS)‐ C2 and one (pR, pR, pR, pR, pR)‐ C2 (meso form), or two (pR, pR, pR, pR, pR)‐ C2 wheels. The [3]rotaxane enantiomers and the meso form were successfully isolated using appropriate chiral HPLC column chromatography. The procedure developed in this study is the starting point for the creation of pillar[5]arene‐based interlocked molecules.     

Langmuir and Langmuir–Blodgett Films from Amphiphilic Pillar[5]arene‐Containing [2]Rotaxanes

Amphiphilic pillar[5]arene‐containing [2]rotaxanes have been prepared and fully characterized. In the particular case of the [2]rotaxane incorporating a 1,4‐diethoxypillar[5]arene subunit, the structure of the compound was confirmed by X‐ray crystal structure analysis. Owing to a good hydrophilic/hydrophobic balance, stable Langmuir films have been obtained for these rotaxanes and the size of the peripheral alkyl chains on the pillar[5]arene subunit has a dramatic influence on the reversibility during compression–decompression cycles. Indeed, when these are small enough, molecular reorganization of the rotaxane by gliding motions are capable of preventing strong π–π interactions between neighboring macrocycles in the thin film.     

The Effect of Incorporating Fréchet Dendrons into Rotaxanes and Molecular Shuttles Containing the 1,2‐Bis(pyridinium)ethane⊂[24]Crown‐8 Templating Motif

Fréchet‐type dendrons (G0–G3) were added as both axle stoppering units and cyclic wheel appendages in a series of [2]rotaxanes, [3]rotaxanes, and molecular shuttles that employ 1,2‐bis(pyridinium)ethane axles and 24‐membered crown ethers wheels. The addition of dendrimer wedges as stoppering units dramatically increased the solubility of simple [2]rotaxanes in nonpolar solvents. The X‐ray structure of a G1‐stoppered [2]rotaxane shows how the dendritic units affect the structure of the interlocked components. Increased solubility allows observation of how the interaction of dendritic units on separate components in interlocked molecules influences switching properties and molecular size. In a series of [2]rotaxane molecular shuttles incorporating two recognition sites, it was demonstrated that an increase in generation on either the stoppering unit or cyclic wheel could influence both the rate of shuttling and the site preference of the wheel on the axle.     

Use of anions to allow translational isomerism of a [2]rotaxane

We report a molecular [2]rotaxane which comprises a molecular cage and a dumbbell-shaped component, in which translational isomerism can be performed reversibly through an in situ anion exchange process, that is, sequential addition of Bu4NCl/AgPF6 reagent pairs. The [2]rotaxane incorporates two pyridinium and two dialkylammonium centers and functions as a triply operable molecular switch, which can be controlled through altering the polarity of the solvent, adding acidic and basic reagents (TFA/Et3N), and the varying the nature of the counteranions (Cl- vs PF6-).