Radiosynthesis of 5-[18F]Fluoro-1,2,3-triazoles through Aqueous Iodine–[18F]Fluorine Exchange Reaction

In this report, a simple and efficient process to achieve fluorine-18-labeled 1,2,3-triazole is reported. The heteroaromatic radiofluorination was successfully achieved through an iodine–fluorine-18 exchange in an aqueous medium requiring only trace amounts of base and no azeotropic drying of fluorine-18. This methodology was optimized on a model reaction and further validated on multiple 1,2,3-triazole substrates with 18–60% radiochemical conversions. Using this strategy—the radiosynthesis of a triazole-based thiamin analogue—a potential positron emission tomography (PET) probe for imaging thiamin-dependent enzymes was synthesized with 10–16% isolated radiochemical yield (RCY) in 40 min (uncorrected, n > 5).     

Fast and Efficient 18F‐Labeling by [18F]Fluorophenylazocarboxylic Esters

Introduction of [¹⁸F]fluoride ion into the aromatic core of phenylazocarboxylic esters was achieved in only 30 seconds, with radiochemical yields of up to 95 % (85(±10) %). For labeling purposes, the resulting ¹⁸F‐substituted azoester can be further converted in radical‐arylation reactions to give biaryls, or in substitutions at its carbonyl unit to produce azocarboxamides.     

Selectfluor: Mechanistic Insight and Applications

The replacement of hydrogen atoms with fluorine substituents in organic substrates is of great interest in synthetic chemistry because of the strong electronegativity of fluorine and relatively small steric footprint of fluorine atoms. Many sources of nucleophilic fluorine are available for the derivatization of organic molecules under acidic, basic, and neutral conditions. However, electrophilic fluorination has historically required molecular fluorine, whose notorious toxicity and explosive tendencies limit its application in research. The necessity for an electrophilic fluorination reagent that is safe, stable, highly reactive, and amenable to industrial production as an alternative to very hazardous molecular fluorine was the inspiration for the discovery of selectfluor. This reagent is not only one of the most reactive electrophilic fluorinating reagents available, but it is also safe, nontoxic, and easy to handle. In this Review we document the many applications of selectfluor and discuss possible mechanistic pathways for its reaction.     

正电子发射显像剂O-(2-[18F]氟乙基)-L-酪氨酸的新型前体的合成

设计合成了5种新型正电子发射断层显像剂[O-(2-[¹⁸F]氟乙基)-L-酪氨酸的前体化合物：N-叔丁氧羰基-O-(2-甲磺酰/对硝基苯磺酰)-氧乙基-L-酪氨酸甲酯(9a,11a)和N-叔丁氧羰基-O-(2-甲磺酰/对甲苯磺酰/对硝基苯磺酰)-氧乙基-L-酪氨酸叔丁酯(9b,10b,11b)。 这些化合物以L-酪氨酸为原料,先与甲醇发生酯化反应或与乙酸叔丁酯进行酯交换,再用叔丁氧羰基保护氨基,最后以碳酸钾为碱、18-冠-6为相转移催化剂与乙二醇的磺酸酯在丙酮溶液中加热回流形成目标化合物,总收率为30%～67%。     

18F Labeling of Arenes

Molecular imaging has witnessed an upsurge in growth, with positron emission tomography leading the way. This trend has encouraged numerous synthetic chemists to enter the field of ¹⁸F‐radiochemistry and provide generic solutions to address the well‐recognized challenges of late‐stage fluorination. This Minireview focuses on recent developments in the ¹⁸F‐labeling of aromatic substrates.     

Preparation,Optimisation, and In Vitro Evaluation of [18F]AlF-NOTA-Pamidronic Acid for Bone Imaging PET

[¹⁸F]sodium fluoride ([¹⁸F]NaF) is recognised to be superior to [⁹⁹mTc]-methyl diphosphate ([^99mTc]Tc-MDP) and 2-deoxy-2-[¹⁸F]fluoro-D-glucose ([¹⁸F]FDG) in bone imaging. However, there is concern that [¹⁸F]NaF uptake is not cancer-specific, leading to a higher number of false-positive interpretations. Therefore, in this work, [¹⁸F]AlF-NOTA-pamidronic acid was prepared, optimised, and tested for its in vitro uptake. NOTA-pamidronic acid was prepared by an N-Hydroxysuccinimide (NHS) ester strategy and validated by liquid chromatography-mass spectrometry analysis (LC-MS/MS). Radiolabeling of [¹⁸F]AlF-NOTA-pamidronic acid was optimised, and it was ensured that all quality control analysis requirements for the radiopharmaceuticals were met prior to the in vitro cell uptake studies. NOTA-pamidronic acid was successfully prepared and radiolabeled with ¹⁸F. The radiolabel was prepared in a 1:1 molar ratio of aluminium chloride (AlCl₃) to NOTA-pamidronic acid and heated at 100 °C for 15 min in the presence of 50% ethanol (v/v), which proved to be optimal. The preliminary in vitro results of the binding of the hydroxyapatite showed that [¹⁸F]AlF-NOTA-pamidronic acid was as sensitive as [¹⁸F]sodium fluoride ([¹⁸F]NaF). Normal human osteoblast cell lines (hFOB 1.19) and human osteosarcoma cell lines (Saos-2) were used for the in vitro cellular uptake studies. It was found that [¹⁸F]NaF was higher in both cell lines, but [¹⁸F]AlF-NOTA-pamidronic acid showed promising cellular uptake in Saos-2. The preliminary results suggest that further preclinical studies of [¹⁸F]AlF-NOTA-pamidronic acid are needed before it is transferred to clinical research.     

Difluorocarbene‐Derived Trifluoromethylthiolation and [18F]Trifluoromethylthiolation of Aliphatic Electrophiles

The first trifluoromethylthiolation and [¹⁸F]trifluoromethylthiolation of alkyl electrophiles with in situ generated difluorocarbene in the presence of elemental sulfur and external (radioactive) fluoride ion is described. This transition‐metal‐free approach is high yielding, compatible with a variety of functional groups, and operated under mild reaction conditions. The conceptual advantage of this exogenous‐fluoride‐mediated transformation enables unprecedented syntheses of [¹⁸F]CF₃S‐labeled molecules from most commonly used [¹⁸F]fluoride ions. The rapid radiochemical reaction time (≤1 min) and high functional‐group tolerance allow access to a variety of aliphatic [¹⁸F]CF₃S compounds in high yields.     

A Resin‐Linker‐Vector Approach to Radiopharmaceuticals Containing 18F: Application in the Synthesis of O‐(2‐[18F]‐Fluoroethyl)‐L‐tyrosine

A Resin‐linker‐vector (RLV) strategy is described for the radiosynthesis of tracer molecules containing the radionuclide ¹⁸F, which releases the labelled vector into solution upon nucleophilic substitution of a polystyrene‐bound arylsulfonate linker with [¹⁸F]‐fluoride ion. Three model linker‐vector molecules 7 a – c containing different alkyl spacer groups were assembled in solution from (4‐chlorosulfonylphenyl)alkanoate esters, exploiting a lipase‐catalysed chemoselective carboxylic ester hydrolysis in the presence of the sulfonate ester as a key step. The linker‐vector systems were attached to aminomethyl polystyrene resin through amide bond formation to give RLVs 8 a – c with acetate, butyrate and hexanoate spacers, which were characterised by using magic‐angle spinning (MAS) NMR spectroscopy. On fluoridolysis, the RLVs 8 a , b containing the longer spacers were shown to be more effective in the release of the fluorinated model vector (4‐fluorobutyl)phenylcarbamic acid tert‐butyl ester ( 9 ) in NMR kinetic studies and gave superior radiochemical yields (RCY≈60 %) of the ¹⁸F‐labelled vector. The approach was applied to the synthesis of the radiopharmaceutical O‐(2‐[¹⁸F]‐fluoroethyl)‐L ‐tyrosine ([¹⁸F]‐FET), delivering protected [¹⁸F]‐FET in >90 % RCY. Acid deprotection gave [¹⁸F]‐FET in an overall RCY of 41 % from the RLV.     

[18F]Ethenesulfonyl Fluoride as a Practical Radiofluoride Relay Reagent

Fluorine-18 is the most utilized radioisotope in positron emission tomography (PET), but the wide application of fluorine-18 radiopharmaceuticals is hindered by its challenging labelling conditions. As such, many potentially important radiotracers remain underutilized. Herein, we describe the use of [¹⁸F]ethenesulfonyl fluoride (ESF) as a novel radiofluoride relay reagent that allows radiofluorination reactions to be performed in minimally equipped satellite nuclear medicine centres. [¹⁸F]ESF has a simple and reliable production route and can be stored on inert cartridges. The cartridges can then be shipped remotely and the trapped [¹⁸F]ESF can be liberated by simple solvent elution. We have tested 18 radiolabelling precursors, inclusive of model and clinically used structures, and most precursors have demonstrated comparable radiofluorination efficiencies to those obtained using a conventionally dried [¹⁸F]fluoride source.     

Al[18F]F-HBED-CC-radiolabeling in a media of protic alkanolammonium ionic liquids

The possibility of Al¹⁸F-radiolabeling of molecules with the N,N'-bis[2-hydroxy-5-(2-carboxyethyl)benzyl]ethylenediamine-N, N'-diacetic acid motif in the medium of protic alkanolammonium ionic liquids is reported for the first time. Ionic liquids containing triethanolammonium or triisopropanolammonium cations proved to be the most promising. High values of radiochemical conversion were achieved using the minimum amount of the precursor.     

One-Pot Synthesis of 11C-Labelled Primary Benzamides via Intermediate [11C]Aroyl Dimethylaminopyridinium Salts

Electrophilic ¹¹C-labelled aroyl dimethylaminopyridinium salts, obtained by carbonylative cross-coupling of aryl halides with [¹¹C]carbon monoxide, were prepared for the first time and shown to be valuable intermediates in the synthesis of primary [¹¹C]benzamides. The methodology furnished a set of benzamide model compounds, including the two poly (ADP-ribose) polymerase (PARP) inhibitors niraparib and veliparib, in moderate to excellent radiochemical yields. In addition to providing a convenient and practical route to primary [¹¹C]benzamides, the current method paves the way for future application of [¹¹C]aroyl dimethylaminopyridinium halide salts in positron emission tomography (PET) tracer synthesis.     

Mapping Aldehyde Dehydrogenase 1A1 Activity using an [18F]Substrate-Based Approach

Aldehyde dehydrogenases (ALDHs) catalyze the oxidation of aldehydes to carboxylic acids. Elevated ALDH expression in human cancers is linked to metastases and poor overall survival. Despite ALDH being a poor prognostic factor, the non-invasive assessment of ALDH activity in vivo has not been possible due to a lack of sensitive and translational imaging agents. Presented in this report are the synthesis and biological evaluation of ALDH1A1-selective chemical probes composed of an aromatic aldehyde derived from N,N-diethylamino benzaldehyde (DEAB) linked to a fluorinated pyridine ring either via an amide or amine linkage. Of the focused library of compounds evaluated, N-ethyl-6-(fluoro)-N-(4-formylbenzyl)nicotinamide 4 b was found to have excellent affinity and isozyme selectivity for ALDH1A1 in vitro. Following ¹⁸F-fluorination, [¹⁸F] 4 b was taken up by colorectal tumor cells and trapped through the conversion to its ¹⁸F-labeled carboxylate product under the action of ALDH. In vivo positron emission tomography revealed high uptake of [¹⁸F] 4 b in the lungs and liver, with radioactivity cleared through the urinary tract. Oxidation of [¹⁸F] 4 b , however, was observed in vivo, which may limit the tissue penetration of this first-in-class radiotracer.     

Efficient synthesis of (2S)-tert-butyl 2-(2-bromopropanamido)-5-oxo-5-(tritylamino)pentanoate as a precursor of PET radiotracer [18F]FPGLN

This study describes a convenient protocol for the synthesis of (2S)-tert-butyl 2-(2-bromopropanamido)-5-oxo-5-(tritylamino)pentanoate, which can serve as an appropriate precursor of (2S)-5-amino-2-(2-[¹⁸F]fluoropropanamido)-5-oxopentanoic acid (N-(2-[¹⁸F]fluoropropionyl)-L-glutamine, [¹⁸F]FPGLN) for tumor positron emission tomography imaging. Five-step synthesis starting from L-glutamine provided the desired precursor with high yields. In addition, a simple method for the preparation of [¹⁸F]FPGLN from this easily available precursor was developed using a two-step ¹⁸F-labeling strategy.     

Fully Automated Synthesis of Novel TSPO PET Imaging Ligand [18F]Fluoroethyltemazepam

Introduction: Benzodiazepines, including temazepam are described as TSPO antagonists. In fact, TSPO was initially described as a peripheral benzodiazepine receptor (PBR) with a secondary binding site for diazepam. TSPO is a potential imaging target of neuroinflammation because there is an amplification of the expression of this receptor. Objectives: Herein, we developed a novel fluorinated benzodiazepine ligand, [¹⁸F]Fluoroethyltemazepam ([¹⁸F]F-FETEM), for positron emission tomography (PET) imaging of translocator protein (18 kDa). Methods: [¹⁸F]F-FETEM was radiolabelled with an automated synthesizer via a one-pot procedure. We conducted a [¹⁸F]F-aliphatic nucleophilic substitution of a tosylated precursor followed by purification on C18 and Alumina N SPE cartridges. Quality control tests was also carried out. Results: We obtained 2.0–3.0% decay-uncorrected radiochemical activity yield (3.7% decay-corrected) within the whole synthesis time about 33 min. The radiochemical purity of [¹⁸F]F-FETEM was over 90% by TLC analysis. Conclusions: This automated procedure may be used as basis for future production of [¹⁸F]F-FETEM for preclinical PET imaging studies.     

Broad Scope and High-Yield Access to Unsymmetrical Acyclic [11C]Ureas for Biomedical Imaging from [11C]Carbonyl Difluoride

Effective methods are needed for labelling acyclic ureas with carbon-11 (t_1/2=20.4 min) as potential radiotracers for biomedical imaging with positron emission tomography (PET). Herein, we describe the rapid and high-yield syntheses of unsymmetrical acyclic [¹¹C]ureas under mild conditions (room temperature and within 7 min) using no-carrier-added [¹¹C]carbonyl difluoride with aliphatic and aryl amines. This methodology is compatible with diverse functionality (e. g., hydroxy, carboxyl, amino, amido, or pyridyl) in the substrate amines. The labelling process proceeds through putative [¹¹C]carbamoyl fluorides and for primary amines through isolable [¹¹C]isocyanate intermediates. Unsymmetrical [¹¹C]ureas are produced with negligible amounts of unwanted symmetrical [¹¹C]urea byproducts. Moreover, the overall labelling method tolerates trace water and the generally moderate to excellent yields show good reproducibility. [¹¹C]Carbonyl difluoride shows exceptional promise for application to the synthesis of acyclic [¹¹C]ureas as new radiotracers for biomedical imaging with PET.     

One‐Pot,Direct Incorporation of [11C]CO2 into Carbamates

Why beat about the bush? An operationally simple and mild reaction based on the direct fixation of ¹¹CO₂ with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) has been developed for the synthesis of ¹¹C‐labeled carbamates at 75 °C within 10 minutes in radiochemical yields above 70 % (see scheme). This strategy should be immediately useful for the construction of new radiotracers for positron emission tomography and other applications.

     

[18F]CuCF3: A [18F]Trifluoromethylating Agent for Arylboronic Acids and Aryl Iodides

Positron emission tomography has emerged as the leading method for medical imaging with fluorine‐18 as the most widely used radioactive isotope. Here we report a semi‐automated method for the preparation of valuable [¹⁸F]trifluoromethylcopper, as well as its use for the radiosynthesis of [¹⁸F]trifluoromethylarenes and heteroarenes. Mild conditions of [¹⁸F]trifluoromethylation make this method particularly useful for the radiosynthesis of pharmacologically relevant [¹⁸F]trifluoromethylarenes and heteroarenes.