Metal Microporous Aromatic Polymers with Improved Performance for Small Gas Storage

A novel metal‐doping strategy was developed for the construction of iron‐decorated microporous aromatic polymers with high small‐gas‐uptake capacities. Cost‐effective ferrocene‐functionalized microporous aromatic polymers (FMAPs) were constructed by a one‐step Friedel–Crafts reaction of ferrocene and s‐triazine monomers. The introduction of ferrocene endows the microporous polymers with a regular and homogenous dispersion of iron, which avoids the slow reunion that is usually encountered in previously reported metal‐doping procedures, permitting a strong interaction between the porous solid and guest gases. Compared to ferrocene‐free analogues, FMAP‐1, which has a moderate BET surface area, shows good gas‐adsorption capabilities for H₂ (1.75 wt % at 77 K/1.0 bar), CH₄ (5.5 wt % at 298 K/25.0 bar), and CO₂ (16.9 wt % at 273 K/1.0 bar), as well as a remarkably high ideal adsorbed solution theory CO₂/N₂ selectivity (107 v/v at 273 K/(0–1.0) bar), and high isosteric heats of adsorption of H₂ (16.9 kJ mol^?1) and CO₂ (41.6 kJ mol^?1).     

A Robust 3D Cage‐like Ultramicroporous Network Structure with High Gas‐Uptake Capacity

A three‐dimensional (3D) cage‐like organic network (3D‐CON) structure synthesized by the straightforward condensation of building blocks designed with gas adsorption properties is presented. The 3D‐CON can be prepared using an easy but powerful route, which is essential for commercial scale‐up. The resulting fused aromatic 3D‐CON exhibited a high Brunauer–Emmett–Teller (BET) specific surface area of up to 2247 m² g^?1. More importantly, the 3D‐CON displayed outstanding low pressure hydrogen (H₂, 2.64 wt %, 1.0 bar and 77 K), methane (CH₄, 2.4 wt %, 1.0 bar and 273 K), and carbon dioxide (CO₂, 26.7 wt %, 1.0 bar and 273 K) uptake with a high isosteric heat of adsorption (H₂, 8.10 kJ mol^?1; CH₄, 18.72 kJ mol^?1; CO₂, 31.87 kJ mol^?1). These values are among the best reported for organic networks with high thermal stability (ca. 600 °C).     

Post‐Synthetic Reversible Incorporation of Organic Linkers into Porous Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations and Modification of Gas‐Sorption Properties

The porous metal–organic framework (MOF) {[Zn₂(TCPBDA)(H₂O)₂]?30 DMF?6 H₂O}_n ( SNU‐30 ; DMF=N,N‐dimethylformamide) has been prepared by the solvothermal reaction of N,N,N′,N′‐tetrakis(4‐carboxyphenyl)biphenyl‐4,4′‐diamine (H₄TCPBDA) and Zn(NO₃)₂?6 H₂O in DMF/tBuOH. The post‐synthetic modification of SNU‐30 by the insertion of 3,6‐di(4‐pyridyl)‐1,2,4,5‐tetrazine (bpta) affords single‐crystalline {[Zn₂(TCPBDA)(bpta)]?23 DMF?4 H₂O}_n ( SNU‐31 SC ), in which channels are divided by the bpta linkers. Interestingly, unlike its pristine form, the bridging bpta ligand in the MOF is bent due to steric constraints. SNU‐31 can be also prepared through a one‐pot solvothermal synthesis from Zn^II, TCPBDA^4?, and bpta. The bpta linker can be liberated from this MOF by immersion in N,N‐diethylformamide (DEF) to afford the single‐crystalline SNU‐30 SC , which is structurally similar to SNU‐30 . This phenomenon of reversible insertion and removal of the bridging ligand while preserving the single crystallinity is unprecedented in MOFs. Desolvated solid SNU‐30′ adsorbs N₂, O₂, H₂, CO₂, and CH₄ gases, whereas desolvated SNU‐31′ exhibits selective adsorption of CO₂ over N₂, O₂, H₂, and CH₄, thus demonstrating that the gas adsorption properties of MOF can be modified by post‐synthetic insertion/removal of a bridging ligand.     

A Robust Porous Metal–Organic Framework with a New Topology That Demonstrates Pronounced Porosity and High‐Efficiency Sorption/Selectivity Properties of Small Molecules

A robust porous metal–organic framework (MOF), [Co₃(ndc)(HCOO)₃(μ₃‐OH)(H₂O)]_n ( 1 ) (H₂ndc=5‐(4‐pyridyl)‐isophthalic acid), was synthesized with pronounced porosity. MOF 1 contained two different types of nanotubular channels, which exhibited a new topology with the Schlafli symbol of {4².6⁵.8³}{4².6}. MOF 1 showed high‐efficiency for the selective sorption of small molecules, including the energy‐correlated gases of H₂, CH₄, and CO₂, and environment‐correlated steams of alcohols, acetone, and pyridine. Gas‐sorption experiments indicated that MOF 1 exhibited not only a high CO₂‐uptake (25.1 wt % at 273 K/1 bar) but also the impressive selective sorption of CO₂ over N₂ and CH₄. High H₂‐uptake (2.04 wt % at 77 K/1 bar) was also observed. Moreover, systematic studies on the sorption of steams of organic molecules displayed excellent capacity for the sorption of the homologous series of alcohols (C₁–C₅), acetone, pyridine, as well as water.     

A Novel Bismuth‐Based Metal–Organic Framework for High Volumetric Methane and Carbon Dioxide Adsorption

Solvothermal reaction of H₄L (L=biphenyl‐3,3′,5,5′‐tetracarboxylate) and Bi(NO₃)₃ ? (H₂O)₅ in a mixture of DMF/MeCN/H₂O in the presence of piperazine and nitric acid at 100 °C for 10 h affords the solvated metal–organic polymer [Bi₂(L)_1.5(H₂O)₂] ? (DMF)_3.5 ? (H₂O)₃ (NOTT‐220‐solv). A single crystal X‐ray structure determination confirms that it crystallises in space group P2/c and has a neutral and non‐interpenetrated structure comprising binuclear {Bi₂} centres bridged by tetracarboxylate ligands. NOTT‐220‐solv shows a 3,6‐connected network having a framework topology with a {4 ? 6²}₂{4² ? 6⁵ ? 8⁸}{6² ? 8} point symbol. The desolvated material NOTT‐220a shows exceptionally high adsorption uptakes for CH₄ and CO₂ on a volumetric basis at moderate pressures and temperatures with a CO₂ uptake of 553 g L^?1 (20 bar, 293 K) with a saturation uptake of 688 g L^?1 (1 bar, 195 K). The corresponding CH₄ uptake was measured as 165 V(STP)/V (20 bar, 293 K) and 189 V(STP/V) (35 bar, 293 K) with a maximum CH₄ uptake for NOTT‐220a recorded at 20 bar and 195 K to be 287 V(STP)/V, while H₂ uptake of NOTT‐220a at 20 bar, 77 K is 42 g L^?1. These gas uptakes have been modelled by grand canonical Monte Carlo (GCMC) and density functional theory (DFT) calculations, which confirm the experimental data and give insights into the nature of the binding sites of CH₄ and CO₂ in this porous hybrid material.     

Ligand Functionalization and Its Effect on CO2 Adsorption in Microporous Metal–Organic Frameworks

We report two new 3D structures, [Zn₃(bpdc)₃(2,2′‐dmbpy)] (DMF)_x(H₂O)_y ( 1 ) and [Zn₃(bpdc)₃(3,3′‐dmbpy)]?(DMF)₄(H₂O)_0.5 ( 2 ), by methyl functionalization of the pillar ligand in [Zn₃(bpdc)₃(bpy)] (DMF)₄?(H₂O) ( 3 ) (bpdc=biphenyl‐4,4′‐dicarboxylic acid; z,z′‐dmbpy=z,z′‐dimethyl‐4,4′‐bipyridine; bpy=4,4′‐bipyridine). Single‐crystal X‐ray diffraction analysis indicates that 2 is isostructural to 3 , and the power X‐ray diffraction (PXRD) study shows a very similar framework of 1 to 2 and 3 . Both 1 and 2 are 3D porous structures made of Zn₃(COO)₆ secondary building units (SBUs) and 2,2′‐ or 3,3′‐dmbpy as pillar ligand. Thermogravimetric analysis (TGA) and PXRD studies reveal high thermal and water stability for both compounds. Gas‐adsorption studies show that the reduction of surface area and pore volume by introducing a methyl group to the bpy ligand leads to a decrease in H₂ uptake for both compounds. However, CO₂ adsorption experiments with 1′ (guest‐free 1 ) indicate significant enhancement in CO₂ uptake, whereas for 2′ (guest‐free 2 ) the adsorbed amount is decreased. These results suggest that there are two opposing and competitive effects brought on by methyl functionalization: the enhancement due to increased isosteric heats of CO₂ adsorption (Q_st), and the detraction due to the reduction of surface area and pore volume. For 1′ , the enhancement effect dominates, which leads to a significantly higher uptake of CO₂ than its parent compound 3′ (guest‐free 3 ). For 2′ , the detraction effect predominates, thereby resulting in reduced CO₂ uptake relative to its parent structure 3′ . IR and Raman spectroscopic studies also present evidence for strong interaction between CO₂ and methyl‐functionalized π moieties. Furthermore, all compounds exhibit high separation capability for CO₂ over other small gases including CH₄, CO, N₂, and O₂.     

A novel cadmium(II) coordination polymer with biphenyl‐3,3′,4,4′‐tetra­carboxylic acid and 4,4′‐bipyridine

A novel cadmium(II) coordination polymer, poly[[[bis­(4,4′‐bipyridine)cadmium(II)]‐μ₃‐4,4′‐dicarboxy­biphenyl‐3,3′‐di­carboxyl­ato] 0.35‐hydrate], {[Cd(C₁₆H₈O₈)(C₁₀H₈N₂)₂]·0.35H₂O}_n, was obtained by reaction of Cd(CH₃COO)₂·3H₂O, 4,4′‐bipyridine (4,4′‐bpy) and biphenyl‐3,3′,4,4′‐tetra­car­boxylic acid (H₄L) under hydro­thermal conditions. Each Cd^II atom lies at the centre of a distorted octa­hedron, coordinated by four O atoms from three H₂L²⁻ ligands and N atoms from two monodentate 4,4′‐bpy ligands. Each H₂L²⁻ ligand coordinates to three Cd^II atoms through two carboxyl­ate groups, one acting as a bridging bidentate ligand and the other in a chelating bidentate fashion. Two Cd atoms, two H₂L²⁻ anions and four 4,4′‐bpy ligands form a ring dimer node, which links into an extended broad zonal one‐dimensional chain along the c axis.     

Metal‐catalyzed reversible conversion between chemical and electrical energy designed towards a sustainable society

Proton dissociation of an aqua‐Ru‐quinone complex, [Ru(trpy)(q)(OH₂)]²⁺ (trpy = 2,2′ : 6′,2″‐terpyridine, q = 3,5‐di‐t‐butylquinone) proceeded in two steps (pK_a = 5.5 and ca. 10.5). The first step simply produced [Ru(trpy)(q)(OH)]⁺, while the second one gave an unusual oxyl radical complex, [Ru(trpy)(sq)(O^?.)]⁰ (sq = 3,5‐di‐t‐butylsemiquinone), owing to an intramolecular electron transfer from the resultant O^2? to q. A dinuclear Ru complex bridged by an anthracene framework, [Ru₂(btpyan)(q)₂(OH)₂]²⁺ (btpyan = 1,8‐bis(2,2′‐terpyridyl)anthracene), was prepared to place two Ru(trpy)(q)(OH) groups at a close distance. Deprotonation of the two hydroxy protons of [Ru₂(btpyan)(q)₂(OH)₂]²⁺ generated two oxyl radical Ru‐O^?. groups, which worked as a precursor for O₂ evolution in the oxidation of water. The [Ru₂(btpyan)(q)₂(OH)₂](SbF₆)₂ modified ITO electrode effectively catalyzed four‐electron oxidation of water to evolve O₂ (TON = 33500) under electrolysis at +1.70 V in H₂O (pH 4.0). Various physical measurements and DFT calculations indicated that a radical coupling between two Ru(sq)(O^?.) groups forms a (cat)Ru‐O‐O‐Ru(sq) (cat = 3,5‐di‐t‐butylcathechol) framework with a μ‐superoxo bond. Successive removal of four electrons from the cat, sq, and superoxo groups of [Ru₂(btpyan)(cat)(sq)(μ‐O₂^?)]⁰ assisted with an attack of two water (or OH^?) to Ru centers, which causes smooth O₂ evolution with regeneration of [Ru₂(btpyan)(q)₂(OH)₂]²⁺. Deprotonation of an Ru‐quinone‐ammonia complex also gave the corresponding Ru‐semiquinone‐aminyl radical. The oxidized form of the latter showed a high catalytic activity towards the oxidation of methanol in the presence of base. Three complexes, [Ru(bpy)₂(CO)₂]²⁺, [Ru(bpy)₂(CO)(C(O)OH)]⁺, and [Ru(bpy)₂(CO)(CO₂)]⁰ exist as an equilibrium mixture in water. Treatment of [Ru(bpy)₂(CO)₂]²⁺ with BH₄^? gave [Ru(bpy)₂(CO)(C(O)H)]⁺, [Ru(bpy)₂(CO)(CH₂OH)]⁺, and [Ru(bpy)₂(CO)(OH₂)]²⁺ with generation of CH₃OH in aqueous conditions. Based on these results, a reasonable catalytic pathway from CO₂ to CH₃OH in electro‐ and photochemical CO₂ reduction is proposed. A new pbn (pbn = 2‐pyridylbenzo[b]‐1,5‐naphthyridine) ligand was designed as a renewable hydride donor for the six‐electron reduction of CO₂. A series of [Ru(bpy)_3‐n(pbn)_n]²⁺ (n = 1, 2, 3) complexes undergoes photochemical two‐ (n = 1), four‐ (n = 2), and six‐electron reductions (n = 3) under irradiation of visible light in the presence of N(CH₂CH₂OH)₃. © 2009 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 9: 169–186; 2009: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.200800039     

A Series of Transition Metal Coordination Polymers Bearing 1,4‐Phenylenediacetate

The reactions of transition metal salts or hydroxide with 1,4‐phenylenediacetic acid (H₂PDA) in the presence of ancillary ligands 4,4′‐bipyridine (4,4′‐bpy) or imidazole (Im) produced five coordination polymers with the empirical formula [M(PDA)(4,4′‐bpy)(H₂O)₂]_n [M = Mn ( 1 ), Ni ( 2 )], [Cu(PDA)(4,4′‐bpy)]_n · 2nH₂O ( 3 ), [Ni(PDA)(Im)₂(H₂O)₂]_n · nH₂O ( 4 ), and [Cu(PDA)(Im)₂]_n · 2nH₂O ( 5 ). Their structures were determined by single‐crystal X‐ray diffraction analyses. The isomorphous 1 and 2 present a two‐dimensional sheet constructed by two kinds of one‐dimensional chains of –Ni^II–PDA^2––Ni^II– and –Ni^II–4,4′‐bpy–Ni^II–. Compound 3 features dinuclear subunits, which are further connected by two PDA^2– ligands and two 4,4′‐bpy ligands along (001) and (011) directions, respectively, to build a two‐dimensional sheet with the topology (4².6⁷.8)(4².6) different from those of 1 and 2 . Both 4 and 5 show one‐dimensional chain structure. The difference of compound 4 and 5 is that the two carboxylato groups of PDA^2– in 4 adopt monodentate coordination modes, whereas the two carboxylato groups of PDA^2– in 5 chelate to the metal ions. Magnetic susceptibility data of 1 were measured. Magnetically, 1 presents a one‐dimensional chain with a weak antiferromagnetic interaction (J =–0.064 cm^–1) between the intrachain Mn^II atoms mediated by 4,4′‐bpy.     

Porphyrin‐based covalent triazine frameworks: Porosity,adsorption performance,and drug delivery

Two porous porphyrin‐based covalent triazine frameworks (PCTFs), in which porphyrin is incorporated as building block, have been synthesized by the Friedel–Crafts reaction. The copolymer PCTFs show large Brunauer–Emmett–Teller specific surface area of up to 1089 m² g^?1, high CO₂ uptake capacity reaching 139.9 mg g^?1 at 273 K/1.0 bar, and good selectivity for CO₂/CH₄ adsorption attaining 6.1 at 273 K/1.0 bar. The resulting porous solids also can be used as matrices for drug delivery of ibuprofen in vitro. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2594–2600     

Poly­[[di­aqua­tris(μ6‐benzene‐1,2,4,5‐tetra­carboxyl­ato)­tris(μ2‐4,4′‐bi­pyridine)­hexacopper(II)] dihydrate]

The hydro­thermal reaction of an aqueous solution of Cu(CH₃COO)₂·H₂O, 1,2,4,5‐benzene­tetra­carboxylic acid and 4,4′‐bi­pyridine gave rise to the interesting title three‐dimensional polymer {[Cu₆(btec)₃(4,4′‐bpy)₃(H₂O)₂]·2H₂O}_n (btec is 1,2,4,5‐benzene­tetra­carboxyl­ate, C₁₀H₂O₈⁴⁻, and 4,4′‐bpy is 4,4′‐bi­pyridine, C₁₀H₈N₂), in which each btec ligand links six copper(II) cations into a lamellar [Cu₆(btec)₃(H₂O)₂]_n sub­polymer framework. There are two distinct diamine units and two distinct carboxylate units, with one of each lying across an inversion centre.     

Impact of Reaction Conditions on the Structures of Nickel(II) Complexes Based on 3‐(4‐Carboxyphenyl)propionic Acid

Two new nickel(II) complexes, [Ni(4, 4′‐bpy)(H₂O)₄]_n · n(cpp) · 0.5nH₂O ( 1 ) and [Ni(cpp)(4, 4′‐bpy)(H₂O)₂]_n ( 2 ) [4, 4′‐bpy = 4, 4′‐bipyridine, H₂cpp = 3‐(4‐carboxyphenyl)propionic acid] were synthesized and characterized by single‐crystal X‐ray diffraction, elemental analysis, IR spectroscopy, and thermal analysis. In complex 1 , Ni^II ions are bridged by 4, 4′‐bpy into 1D chains, and cpp ligands are not involved in the coordination, whereas in complex 2 , cpp ligands adopt a bis(monodentate) mode and link Ni^II ions into 2D (4, 4) grids with the help of 4, 4′‐bpy ligands. Triple interpenetration occurs, which results in the formation of a complicated 3D network. The difference in the structures of the two complexes can be attributed to the different reaction temperatures and bases.     

A new one‐dimensional nickel metal–organic framework: catena‐poly[[[diaquabis(4‐{[(1‐phenyl‐1H‐tetrazol‐5‐yl)sulfanyl]methyl}benzoato‐κO)nickel(II)]‐μ‐4,4′‐bipyridine‐κ2N:N′] monohydrate]

The title complex, {[Ni(C₁₅H₁₁N₄O₂S)₂(C₁₀H₈N₂)(H₂O)₂]·H₂O}_n, was synthesized by the reaction of nickel chloride, 4‐{[(1‐phenyl‐1H‐tetrazol‐5‐yl)sulfanyl]methyl}benzoic acid (HL) and 4,4′‐bipyridine (bpy) under hydrothermal conditions. The asymmetric unit contains two half Ni^II ions, each located on an inversion centre, two L⁻ ligands, one bpy ligand, two coordinated water molecules and one unligated water molecule. Each Ni^II centre is six‐coordinated by two monodentate carboxylate O atoms from two different L⁻ ligands, two pyridine N atoms from two different bpy ligands and two terminal water molecules, displaying a nearly ideal octahedral geometry. The Ni^II ions are bridged by 4,4′‐bipyridine ligands to afford a linear array, with an Ni...Ni separation of 11.361 (1) Å, which is further decorated by two monodentate L⁻ ligands trans to each other, resulting in a one‐dimensional fishbone‐like chain structure. These one‐dimensional fishbone‐like chains are further linked by O—H...O, O—H...N and C—H...O hydrogen bonds and π–π stacking interactions to form a three‐dimensional supramolecular architecture. The thermal stability of the title complex was investigated via thermogravimetric analysis.     

Two Robust Porous Metal–Organic Frameworks Sustained by Distinct Catenation: Selective Gas Sorption and Single‐Crystal‐to‐Single‐Crystal Guest Exchange

Assembly of copper(I) halide with a new tripodal ligand, benzene‐1,3,5‐triyl triisonicotinate (BTTP4), afforded two porous metal–organic frameworks, [Cu₂I₂(BTTP4)]?2 CH₃CN ( 1? 2 CH₃CN) and [CuBr(BTTP4)]?(CH₃CN ? CHCl₃ ? H₂O) ( 2? solvents), which have been characterized by IR spectroscopy, thermogravimetry (TG), single‐crystal, and powder X‐ray diffraction (PXRD) methods. Compound 1.CH3CN is a polycatenated 3D framework that consists of 2D (6,3) networks through inclined catenation, whereas 2 is a doubly interpenetrated 3D framework possessing the ThSi₂‐type ( ths ) (10,3)‐b topology. Both frameworks contain 1D channels of effective sizes 9×12 and 10×10 Ų, which amounts to 43 and 40 % space volume accessible for solvent molecules, respectively. The TG and variable‐temperature PXRD studies indicated that the frameworks can be completely evacuated while retaining the permanent porosity, which was further verified by measurement of the desolvated complex [Cu₂I₂(BTTP4)] ( 1′ ). The subsequent guest‐exchange study on the solvent‐free framework revealed that various solvent molecules can be adsorbed through a single‐crystal‐to‐single‐crystal manner, thus giving rise to the guest‐captured structures [Cu₂I₂(BTTP4)]?C₆H₆ ( 1.benzene ), [Cu₂I₂(BTTP4)]?2 C₇H₈ ( 1.2toluene ), and [Cu₂I₂(BTTP4)]?2 C₈H₁₀ ( 1.2ethyl benzene ). The gas‐adsorption investigation disclosed that two kinds of frameworks exhibited comparable CO₂ storage capacity (86–111 mL g^?1 at 1 atm) but nearly none for N₂ and H₂, thereby implying its separation ability of CO₂ over N₂ and H₂. The vapor‐adsorption study revealed the preferential inclusion of aromatic guests over nonaromatic solvents by the empty framework, which is indicative of selectivity toward benzene over cyclohexane.     

Enhancing CO2 Separation Ability of a Metal–Organic Framework by Post‐Synthetic Ligand Exchange with Flexible Aliphatic Carboxylates

A series of porous metal–organic frameworks having flexible carboxylic acid pendants in their pores (UiO‐66‐ADn: n=4, 6, 8, and 10, where n denotes the number of carbons in a pendant) has been synthesized by post‐synthetic ligand exchange of terephthalate in UiO‐66 with a series of alkanedioic acids (HO₂C(CH₂)_n?2CO₂H). NMR, IR, PXRD, TEM, and mass spectral data have suggested that a terephthalate linker in UiO‐66 was substituted by two alkanedioate moieties, resulting in free carboxyl pendants in the pores. When post‐synthetically modified UiO‐66 was partially digested by adjusting the amount of added HF/sample, NMR spectra indicated that the ratio of alkanedioic acid/terephthalic acid was increased with smaller amounts of acid, implying that the ligand substitution proceeded from the outer layer of the particles. Gas sorption studies indicated that the surface areas and the pore volumes of all UiO‐66‐ADns were decreased compared to those of UiO‐66, and that the CO₂ adsorption capacities of UiO‐66‐ADn (n=4, 8) were similar to that of UiO‐66. In the case of UiO‐66‐AD6, the CO₂ uptake capacity was 34 % higher at 298 K and 58 % higher at 323 K compared to those of UiO‐66. It was elucidated by thermodynamic calculations that the introduction of flexible carboxyl pendants of appropriate length has two effects: 1) it increases the interaction enthalpy between the host framework and CO₂ molecules, and 2) it mitigates the entropy loss upon CO₂ adsorption due to the formation of multiple configurations for the interactions between carboxyl groups and CO₂ molecules. The ideal adsorption solution theory (IAST) selectivity for CO₂ adsorption over that of CH₄ was enhanced for all of the UiO‐66‐ADns compared to that of UiO‐66 at 298 K. In particular, UiO‐66‐AD6 showed the most strongly enhanced CO₂ uptake capacity and significantly increased selectivity for CO₂ adsorption over that of CH₄ at ambient temperature, suggesting that it is a promising material for sequestering CO₂ from landfill gas.     

catena‐Poly[[[pentaaquathulium(III)]‐μ‐5‐sulfonatobenzene‐1,3‐dicarboxylato] 4,4′‐bipyridyl 1.5‐solvate hemihydrate]

The crystal structure of the title compound, {[Tm(C₈H₃O₇S)(H₂O)₅]·1.5C₁₀H₈N₂·0.5H₂O}_n, is built up from two [Tm(SIP)(H₂O)₅] molecules (SIP³⁻ is 5‐sulfonatobenzene‐1,3‐dicarboxylate), three 4,4′‐bipyridyl (bpy) molecules and one solvent water molecule. One of the bpy molecules and the solvent water molecule are located on an inversion centre and a twofold rotation axis, respectively. The Tm^III ion coordination is composed of four carboxylate O atoms from two trianionic SIP³⁻ ligands and five coordinated water molecules. The Tm³⁺ ions are linked by the SIP³⁻ ligands to form a one‐dimensional zigzag chain propagating along the c axis. The chains are linked by interchain O—H...O hydrogen bonds to generate a two‐dimensional layered structure. The bpy molecules are not involved in coordination but are linked by O—H...N hydrogen bonds to form two‐dimensional layers. The two‐dimensional layers are further bridged by the bpy molecules as pillars and the solvent water molecules through hydrogen bonds, giving a three‐dimensional supramolecular structure. π–π stacking interactions between the parallel aromatic rings, arranged in an offset fashion with a face‐to‐face distance of 3.566 (1) Å, are observed in the crystal packing.     

Microporous La–Metal–Organic Framework (MOF) with Large Surface Area

A microporous La–metal‐organic framework (MOF) has been synthesized by the reaction of La(NO₃)₃ ? 6 H₂O with a ligand 4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoate (TATAB) featuring three carboxylate groups. Crystal structure analysis confirms the formation of 3D MOF with hexagonal micropores, a Brunauer–Emmett—Teller (BET) surface area of 1074 m² g^?1 and high thermal and chemical stability. The CO₂ adsorption capacities are 76.8 cm³ g^?1 at 273 K and 34.6 cm³ g^?1 at 293 K, a highest measured CO₂ uptake for a Ln–MOFs.     

Three novel topologically different metal–organic frameworks built from 3‐nitro‐4‐(pyridin‐4‐yl)benzoic acid

The design and synthesis of metal–organic frameworks (MOFs) have attracted much interest due to the intriguing diversity of their architectures and topologies. However, building MOFs with different topological structures from the same ligand is still a challenge. Using 3‐nitro‐4‐(pyridin‐4‐yl)benzoic acid (HL) as a new ligand, three novel MOFs, namely poly[[(N,N‐dimethylformamide‐κO)bis[μ₂‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ³O,O′:N]cadmium(II)] N,N‐dimethylformamide monosolvate methanol monosolvate], {[Cd(C₁₂H₇N₂O₄)₂(C₃H₇NO)]·C₃H₇NO·CH₃OH}_n, ( 1 ), poly[[(μ₂‐acetato‐κ²O:O′)[μ₃‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ³O:O′:N]bis[μ₃‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ⁴O,O′:O′:N]dicadmium(II)] N,N‐dimethylacetamide disolvate monohydrate], {[Cd₂(C₁₂H₇N₂O₄)₃(CH₃CO₂)]·2C₄H₉NO·H₂O}_n, ( 2 ), and catena‐poly[[[diaquanickel(II)]‐bis[μ₂‐3‐nitro‐4‐(pyridin‐4‐yl)benzoato‐κ²O:N]] N,N‐dimethylacetamide disolvate], {[Ni(C₁₂H₇N₂O₄)₂(H₂O)₂]·2C₄H₉NO}_n, ( 3 ), have been prepared. Single‐crystal structure analysis shows that the Cd^II atom in MOF ( 1 ) has a distorted pentagonal bipyramidal [CdN₂O₅] coordination geometry. The [CdN₂O₅] units as 4‐connected nodes are interconnected by L^? ligands to form a fourfold interpenetrating three‐dimensional (3D) framework with a dia topology. In MOF ( 2 ), there are two crystallographically different Cd^II ions showing a distorted pentagonal bipyramidal [CdNO₆] and a distorted octahedral [CdN₂O₄] coordination geometry, respectively. Two Cd^II ions are connected by three carboxylate groups to form a binuclear [Cd₂(COO)₃] cluster. Each binuclear cluster as a 6‐connected node is further linked by acetate groups and L^? ligands to produce a non‐interpenetrating 3D framework with a pcu topology. MOF ( 3 ) contains two crystallographically distinct Ni^II ions on special positions. Each Ni^II ion adopts an elongated octahedral [NiN₂O₄] geometry. Each Ni^II ion as a 4‐connected node is linked by L^? ligands to generate a two‐dimensional network with an sql topology, which is further stabilized by two types of intermolecular OW—HW…O hydrogen bonds to form a 3D supramolecular framework. MOFs ( 1 )–( 3 ) were also characterized by powder X‐ray diffraction, IR spectroscopy and thermogravimetic analysis. Furthermore, the solid‐state photoluminescence of HL and MOFs ( 1 ) and ( 2 ) have been investigated. The photoluminescence of MOFs ( 1 ) and ( 2 ) are enhanced and red‐shifted with respect to free HL. The gas adsorption investigation of MOF ( 2 ) indicates a good separation selectivity (71) of CO₂/N₂ at 273 K (i.e. the amount of CO₂ adsorption is 71 times higher than N₂ at the same pressure).     

Pyrene‐cored covalent organic polymers by thiophene‐based isomers,their gas adsorption,and photophysical properties

Two new pyrene‐cored covalent organic polymers (COPs), CK‐COP‐1 and CK‐COP‐2 , were synthesized via the one‐step polymerization of two thiophene‐based isomers, 1,3,6,8‐tetra(thiophene‐2‐yl) pyrene ( L₁ ) and 1,3,6,8‐tetra(thiophene‐3‐yl) pyrene ( L₂ ). The resulting pyrene‐cored COPs exhibit rather different surface areas of 54 m² g^?1 and 615 m²g^?1 for CK‐COP‐1 and CK‐COP‐2 , respectively. The CO₂ uptake capacities of CK‐COP‐1 and CK‐COP‐2 also show different values of 2.85 and 9.73 wt % at 273 K, respectively. Furthermore, CK‐COP‐2 offers not only a larger CO₂ adsorption capacity but also a better CO₂/CH₄ selectivity at 273 K compared with CK‐COP‐1 . CK‐COP‐1 and CK‐COP‐2 also exhibit considerable differences in their photophysical property. The different structure and properties of CK‐COPs could be attributed to the isomer effect of their corresponding thiophene‐based monomers. © 2017 Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2383–2389     

Effect of Functionalized Groups on Gas‐Adsorption Properties: Syntheses of Functionalized Microporous Metal–Organic Frameworks and Their High Gas‐Storage Capacity

The microporous metal–organic framework (MMOF) Zn₄O(L1)₂ ? 9 DMF ? 9 H₂O ( 1‐H ) and its functionalized derivatives Zn₄O(L1‐CH₃)₂ ? 9 DMF ? 9 H₂O ( 2‐CH₃ ) and Zn₄O(L1‐Cl)₂ ? 9 DMF ? 9 H₂O ( 3‐Cl ) have been synthesized and characterized (H₃L1=4‐[N,N‐bis(4‐methylbenzoic acid)amino]benzoic acid, H₃L1‐CH₃=4‐[N,N‐bis(4‐methylbenzoic acid)amino]‐2‐methylbenzoic acid, H₃L1‐Cl=4‐[N,N‐bis(4‐methylbenzoic acid)amino]‐2‐chlorobenzoic acid). Single‐crystal X‐ray diffraction analyses confirmed that the two functionalized MMOFs are isostructural to their parent MMOF, and are twofold interpenetrated three‐dimensional (3D) microporous frameworks. All of the samples possess enduring porosity with Langmuir surface areas over 1950 cm² g^?1. Their pore volumes and surface areas decrease in the order 1‐H > 2‐CH₃ > 3‐Cl . Gas‐adsorption studies show that the H₂ uptakes of these samples are among the highest of the MMOFs (2.37 wt % for 3‐Cl at 77 K and 1 bar), although their structures are interpenetrating. Furthermore, this work reveals that the adsorbate–adsorbent interaction plays a more important role in the gas‐adsorption properties of these samples at low pressure, whereas the effects of the pore volumes and surface areas dominate the gas‐adsorption properties at high pressure.