Zur Reaktivität von Titanocenkomplexen [Ti(Cp′)2(η2‐Me3SiC≡CSiMe3)] (Cp′ = Cp,Cp*) gegenüber Benzoldicarbonsäuren

On the Reactivity of Titanocene Complexes [Ti(Cp′)₂(η²‐Me₃SiC≡CSiMe₃)] (Cp′ = Cp, Cp*) towards Benzenedicarboxylic Acids Titanocene complexes [Ti(Cp′)₂(BTMSA)] ( 1a , Cp′ = Cp = η⁵‐C₅H₅; 1b , Cp′ = Cp* = η⁵‐C₅Me₅; BTMSA = Me₃SiC≡CSiMe₃) were found to react with iodine and methyl iodide yielding [Ti(Cp′)₂(μ‐I)₂] ( 2a / b ; a refers to Cp′ = Cp and b to Cp′ = Cp*), [Ti(Cp′)₂I₂] ( 3a / b ) and [Ti(Cp′)₂(Me)I] ( 4a / b ), respectively. In contrast to 2a , complex 2b proved to be highly moisture sensitive yielding with cleavage of HCp* [{Ti(Cp*)I}₂(μ‐O)] ( 7 ). The corresponding reactions of 1a / b with p‐cresol and thiophenol resulted in the formation of [Ti(Cp′)₂{O(p‐Tol)}₂] ( 5a / b ) and [Ti(Cp′)₂(SPh)₂] ( 6a / b ), respectively. Reactions of 1a and 1b with 1,n‐benzenedicarboxylic acids (n = 2–4) resulted in the formation of dinuclear titanium(III) complexes of the type [{Ti(Cp′)₂}₂{μ‐1,n‐(O₂C)₂C₆H₄}] (n = 2, 8a / b ; n = 3, 9a / b ; n = 4, 10a / b ). All complexes were fully characterized analytically and spectroscopically. Furthermore, complexes 7 , 8b , 9a ·THF, 10a / b were also be characterized by single‐crystal X‐ray diffraction analyses.     

Imino‐indolate half‐titanocene chlorides: Synthesis and their ethylene (co‐)polymerization

A series of imino‐indolate half‐titanocene chlorides, Cp′Ti(L)Cl₂ ( C1 – C7 : Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = imino‐indolate ligand), were synthesized by the reaction of Cp′TiCl₃ with sodium imino‐indolates. All complexes were characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. Moreover, the molecular structures of two representative complexes C4 and C6 were confirmed by single crystal X‐ray diffraction analysis. On activation with methylaluminoxane (MAO), these complexes showed good catalytic activities for ethylene polymerization (up to 7.68 × 10⁶ g/mol(Ti)·h) and ethylene/1‐hexene copolymerization (up to 8.32 × 10⁶ g/mol(Ti)·h), producing polyolefins with high molecular weights (for polyethylene up to 1808 kg/mol, and for poly(ethylen‐co‐1‐hexene) up to 3290 kg/mol). Half‐titanocenes containing ligands with alkyl substituents showed higher catalytic activities, whereas the half‐titanocenes bearing methyl substituents on the cyclopentadienyl groups showed lower productivities, but produced polymers with higher molecular weights. Moreover, the copolymerization of ethylene and methyl 10‐undecenoate was demonstrated using the C1 /MAO catalytic system. The functionalized polyolefins obtained contained about 1 mol % of methyl 10‐undecenoate units and were fully characterized by several techniques such as FT‐IR, ¹H NMR, ¹³C NMR, DSC, TGA and GPC analyses. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 357–372, 2009     

Unprecedentedly High Formic Acid Dehydrogenation Activity on an Iridium Complex with an N,N′‐Diimine Ligand in Water

Hydrogen production from the dehydrogenation of formic acid (FA) is promising. Most of the current catalysts for FA dehydrogenation are effective only in the presence of bases or additives. We report here newly developed iridium complexes containing conjugated N,N′‐diimine ligands for FA dehydrogenation in water without the addition of bases or additives. A turnover frequency (TOF) of 487 500 h^?1 with [Cp*Ir( L1 )Cl]Cl ( L1 =2,2′‐bi‐2‐imidazoline) at 90 °C and a turnover number (TON) of 2 400 000 with in situ prepared catalyst from [IrCp*Cl₂]₂ and 2,2′‐bi‐1,4,5,6‐tetrahydropyrimidine ( L2 ) at 80 °C were obtained, the highest values reported for FA dehydrogenation to date. A mechanistic study reveals that the formation of [Ir‐H] intermediate species is the rate‐determining step in the catalytic cycle.     

Palladium‐catalyzed unstrained C(sp3)―N bond activation: the synthesis of N,N‐dimethylacetamide by carbonylation of trimethylamine

This work describes a highly efficient unstrained C(sp³)―N bond activation approach for synthesis of N,N‐dimethylacetamide (DMAc) via catalytic carbonylation of trimethylamine using a PdCl₂/bipy (bipy = 2,2′‐bipyridine)/Me₄NI catalyst system. A low Pd catalyst dosage (1.0 mol%) is sufficient for high selectivity (98.1%) and yield (90.8%), with a turnover number (TON) of 90.0 mmol of DMAc obtained per mmol of PdCl₂ employed under mild reaction conditions. The influence of reaction parameters such as catalyst precursor dosage, ligand type and promoter on activity is investigated. This work also discusses in detail the halide promoter's role in the reaction, and provides a plausible mechanism based on the intermediates methyl iodide and acetyl iodide. Analyses indicate that the carbonylation of trimethylamine may proceed through an active intermediate acetyl iodide formed by carbonylation of methyl iodide generated from the decomposition of the promoter Me₄NI under reaction conditions. The formation of acetyl iodide favors the cleaving efficiency of the inert unstrained C(sp³)―N bond of trimethylamine. Copyright © 2013 John Wiley & Sons, Ltd.     

Ethene homopolymerization and copolymerization with 1‐hexene for all methyl‐substituted (RnC5H5−n)2ZrCL2/MAO catalytic systems: Effects of split methyl substitution

Ethene homopolymerization and copolymerization with 1‐hexene were catalyzed by methyl‐substituted cyclopentadienyl (Cp) zirconium dichlorides, (R_n C₅H_5−n)₂ZrCl₂ (R_n = H, Me, 1,2‐Me₂, 1,3‐Me₂, 1,2,3‐Me₃, 1,2,4‐Me₃, Me₄, or Me₅), and methylaluminoxane. The polymers were characterized with Fourier transform infrared, nuclear magnetic resonance, gel permeation chromatography, and differential scanning calorimetry techniques. Generally, an increasing number of methyl substituents on the Cp ligand results in lower 1‐hexene incorporation in the copolymer. The two catalysts with split methyl substitution (R_n = 1,3‐Me₂ and R_n = 1,2,4‐Me₃) show a higher comonomer response than their disubstituted and trisubstituted counterparts (R_n = 1,2‐Me₂ and R_n = 1,2,3‐Me₃). They even incorporate more 1‐hexene than R_n = H and R_n = Me. These findings are qualitatively in agreement with the results of a theoretical study based on density functional calculations. The presence of comonomer does not influence the termination reactions after the insertion of ethene. There is more frequent termination after each hexene insertion with increasing comonomer incorporation except for the two catalysts with split methyl substituents. The termination probability per inserted comonomer is highest for the less substituted catalysts. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3161–3172, 2000     

C?H Bond Activation/Borylation of Furans and Thiophenes Catalyzed by a Half‐Sandwich Iron N‐Heterocyclic Carbene Complex

A coordinatively unsaturated iron‐methyl complex having an N‐heterocyclic carbene ligand, [Cp*Fe(L^Me)Me] ( 1 ; Cp*=η⁵‐C₅Me₅, L^Me=1,3,4,5‐tetramethyl‐imidazol‐2‐ylidene), is synthesized from the reaction of [Cp*Fe(TMEDA)Cl] (TMEDA=N,N,N′,N′‐tetramethylethylenediamine) with methyllithium and L^Me. Complex 1 is found to activate the C? H bonds of furan, thiophene, and benzene, giving rise to aryl complexes, [Cp*Fe(L^Me)(aryl)] (aryl=2‐furyl ( 2 ), 2‐thienyl ( 3 ), phenyl ( 4 )). The C? H bond cleavage reactions are applied to the dehydrogenative coupling of furans or thiophenes with pinacolborane (HBpin) in the presence of tert‐butylethylene and a catalytic amount of 1 (10 mol % to HBpin). The borylation of the furan/thiophene or 2‐substituted furans/thiophenes occurs exclusively at the 2‐ or 5‐positions, respectively, whereas that of 3‐substituted furans/thiophenes takes place mainly at the 5‐position and gives a mixture of regioisomers. Treatment of 2 with 2 equiv of HBpin results in the quantitative formation of 2‐boryl‐furan and the borohydride complex [Cp*Fe(L^Me)(H₂Bpin)] ( 5 ). Heating a solution of 5 in the presence of tert‐butylethylene led to the formation of an alkyl complex [Cp*Fe(L^Me)CH₂CH₂tBu] ( 6 ), which was found to cleave the C? H bond of furan to produce 2 . On the basis of these results, a possible catalytic cycle is proposed.     

RhI‐Catalyzed Cyclizative Addition Reaction of 1,6‐Enyne and Sulfonyl Chloride by Carbophilic Activation

The π‐acid‐catalyzed cyclizations of 1,n‐enynes by carbophilic activation have been extensively studied and appear as highly attractive processes, yet the cases within a catalytic cycle based on redox principle are rare. Herein, we report the cyclizative addition reactions of 1,6‐enynes and sulfonyl chlorides by using a [Rh(cod)Cl/dppf] (dppf=1,1′‐bis(diphenylphosphino)ferrocene) catalyst system. The process features the involvement of oxidative addition of sulfonyl chloride to Rh^I catalyst, which generates [(dppf)(RSO₂)RhCl₂] as a π‐acid species to trigger cyclizative addition in a 6‐endo‐dig manner by carbophilic activation. Moreover, the catalytic protocol is also applicable to 1,6‐diene analogues.     

Factors affecting product distributions in ethylene/styrene copolymerization by (aryloxo)(cyclopentadienyl)titanium complexes‐MAO catalyst systems

Ethylene/styrene copolymerizations using Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp* (C₅Me₅, 1 ), 1,2,4‐Me₃C₅H₂ ( 2 ), tert‐BuC₅H₄ ( 3 )]‐MAO catalyst systems were explored under various conditions. Complexes 2 and 3 exhibited both high catalytic activities (activity: 504–6810 kg‐polymer/mol‐Ti h) and efficient styrene incorporations at 25, 40°C (ethylene 6 atm), affording relatively high molecular weight poly (ethylene‐co‐styrene)s with unimodal molecular weight distributions as well as with uniform styrene distributions (M_w = 6.12–13.6 × 10⁴, M_w/M_n = 1.50–1.71, styrene 31.7–51.9 mol %). By‐productions of syndiotactic polystyrene (SPS) were observed, when the copolymerizations by 1 – 3 ‐MAO catalyst systems were performed at 55, 70 °C (ethylene 6 atm, SPS 9.0–68.9 wt %); the ratios of the copolymer/SPS were affected by the polymerization temperature, the [styrene]/[ethylene] feed molar ratios in the reaction mixture, and by both the cyclopentadienyl fragment (Cp′) and anionic ancillary donor ligand (L) in Cp′TiCl₂(L) (L = Cl, O‐2,6‐ⁱPr₂C₆H₃ or N=C^tBu₂) employed. Co‐presence of the catalytically‐active species for both the copolymerization and the homopolymerization was thus suggested even in the presence of ethylene; the ratios were influenced by various factors (catalyst precursors, temperature, styrene/ethylene feed molar ratio, etc.). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4162–4174, 2008     

Insertions‐ und Substitutionsreaktion von Ameisensäuremethylester mit [Cp′2ZrCl(PHTipp)] – Molekülstruktur von meso‐trans‐[Cp′2ZrCl{OCH(PHTipp)2}] (Cp′ = η5‐C5MeH4, Tipp = 2,4,6‐Pri3C6H2)

Insertion and Substitution Reaction of Methyl Formate with [Cp′₂ZrCl(PHTipp)] – Molecular Structure of meso‐trans ‐[Cp′₂ZrCl{OCH(PHTipp)₂}] (Cp′ = η⁵‐C₅MeH₄, Tipp = 2,4,6‐Prⁱ₃C₆H₂) [Cp′₂ZrCl(PHTipp)] ( 1 ) (Cp′ = η⁵‐C₅MeH₄, Tipp = 2,4,6‐Prⁱ₃C₆H₂) reacts with methyl formate with insertion and substitution to give [Cp′₂ZrCl{OCH(PHTipp)₂}] ( 2 ). 2 was characterized spectroscopically (¹H, ³¹P NMR, IR, MS) and by X‐ray structure determination. Only the meso‐trans isomer is present in the solid state.     

Introduction of reactive functionality by the incorporation of divinylbiphenyl in ethylene copolymerization with styrene or 1‐hexene using aryloxo‐modified half‐titanocenes and MAO catalysts

An efficient introduction of vinyl group into poly (ethylene‐co‐styrene) or poly(ethylene‐co?1‐hexene) has been achieved by the incorporation of 3,3′‐divinylbiphenyl (DVBP) in terpolymerization of ethylene, styrene, or 1‐hexene with DVBP using aryloxo‐modified half‐titanocenes, Cp′TiCl₂(O?2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp*, ^tBuC₅H₄, 1,2,4‐Me₃C₅H₂], in the presence of MAO cocatalyst, affording high‐molecular‐weight polymers with unimodal distributions. Efficient comonomer incorporations have been achieved by these catalysts, and the content of each comonomer could be varied by its initial concentration charged. The postpolymerization of styrene was initiated from the vinyl group remained in the side chain by treatment with n‐BuLi. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2581–2587     

Olefin polymerization with Me4Cp–Amido complexes with electron‐withdrawing groups

A series of Me₄Cp–amido complexes {[η⁵:η¹‐(Me₄C₅)SiMe₂NR]TiCl₂; R = t‐Bu, 1 ; C₆H₅, 2 ; C₆F₅, 3 ; SO₂Ph, 4 ; or SO₂Me, 5 } were prepared and investigated for olefin polymerization in the presence of methylaluminoxane (MAO). X‐ray crystallography of complexes 3 and 4 revealed very long Ti N bonds relative to the bonds of 1 . These complexes were employed for ethylene–styrene copolymerizations, styrene homopolymerizations, and propylene homopolymerizations in the presence of MAO. The productivities of the catalysts derived from 3 – 5 were much lower than the productivity of the catalyst derived from 1 for the propylene polymerizations and ethylene–styrene copolymerizations, whereas the styrene polymerization activities were much higher for the catalysts derived from 3 – 5 than for the catalyst derived from 1 . The polymerization behavior of the catalysts derived from the metallocenes 3 – 5 were more reminiscent of monocyclopentadienyl titanocene Cp′TiX₃/MAO catalysts than of CpATiX₂/MAO catalysts such as 1 containing alkylamido ligands. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4649–4660, 2000     

Reactions of Group 4 Metallocene Complexes with Mono‐ and Diphenylacetonitrile: Formation of Unusual Four‐ and Six‐Membered Metallacycles

Reactions of Group 4 metallocene alkyne complexes [Cp′₂M(η²‐Me₃SiC₂SiMe₃)] ( 1 : M=Zr, Cp′=Cp*=η⁵‐pentamethylcyclopentadienyl; 2 a : M=Ti, Cp′=Cp*, and 2 b : M=Ti, Cp′₂=rac‐(ebthi)=rac‐1,2‐ethylene‐1,1′‐bis(η⁵‐tetrahydroindenyl)) with diphenylacetonitrile (Ph₂CHCN) and of the seven‐membered zirconacyclocumulene 3 with phenylacetonitrile (PhCH₂CN) were investigated. Different compounds were obtained depending on the metal, the cyclopentadienyl ligand and the reaction temperature. In the first step, Ph₂CHCN coordinated to 1 to form [Cp*₂Zr(η²‐Me₃SiC₂SiMe₃)(NCCHPh₂)] ( 4 ). Higher temperatures led to elimination of the alkyne, coordination of a second Ph₂CHCN and transformation of the nitriles to a keteniminate and an imine ligand in [Cp*₂Zr(NC₂Ph₂)(NCHCHPh₂)] ( 5 ). The conversion of 4 to 5 was monitored by using ¹H NMR spectroscopy. The analogue titanocene complex 2 a eliminated the alkyne first, which led directly to [Cp*₂Ti(NC₂Ph₂)₂] ( 6 ) with two keteniminate ligands. In contrast, the reaction of 2 b with diphenylacetonitrile involved a formal coupling of the nitriles to obtain the unusual four‐membered titanacycle 7 . An unexpected six‐membered fused zirconaheterocycle ( 8 ) resulted from the reaction of 3 with PhCH₂CN. The molecular structures of complexes 4 , 5 , 6 , 7 and 8 were determined by X‐ray crystallography.     

Pentafulvenkomplexe des Titans — Synthese,Struktur und Fluktuierendes Verhalten von Cp′Ti{η6‐C5H4=C(p‐Tol)2}Cl (Cp′ = Cp*, Cp)

Complexes of Titanium — Synthesis, Structure, and Fluxional Behaviour of CpTi{η⁶‐C₅H₄=C(p‐Tol)₂}Cl (Cp′ = Cp*, Cp) The reaction of Cp′TiCl₃ (C′ = Cp* or Cp) with magnesium and 6, 6‐di‐para‐tolylpentafulvene generates good yields of pentafulvene complexes Cp*Ti{η⁶‐C₅H₄=C(p‐Tol)₂}Cl ( 4 ) and CpTi{η⁶‐C₅H₄=C(p‐Tol)₂}Cl ( 5 ), respectively. The crystal and molecular structure of 4 have been determined from X‐ray data and exhibits compared to known η⁶‐pentafulvene complexes an unusual large Ti—C(p‐Tol)₂ (Fv)‐distance (2.535(5)Å) evoked by the bulky substituents at the exocyclic carbon. Dynamic ¹H‐NMR and spin saturation transfer experiments point out a rotation of the fulvene ligand around the Ti—Ct2 axis (Ct2 = centroid of the fulvene ring carbon atoms) with an activation barrier ΔG^≠_C = 60.6 ± 0.5 kJ mol⁻¹ (T_C = 314 ± 2 K). For 5 this barrier is significantly larger. Analogous dynamic behaviour is well known for diene complexes, but to our knowledge, it is here first‐time described for a pentafulvene complex.     

Syntheses and Anti—inflammatory Actiobn of （η—C5H5）2Ti （Cin）2 and （η—C5H5）2Ti（Tzea）2

Two new Complexes(Cp)2Ti(Cin)2and (CP2)Ti(Tzea)2(CP=Cyclopentadienyl η^5-C5H5)have been synthesized in THF by the reaction of HCin(Cincofen,2-phenylquinoline-4-carboxylic acid)or HTzea(5-phenyltetrazolyl-2-ethanoic acid)with(Cp)2TiCl2,and characterized by elemental analyses,IR,1H NMR and 13C NMR,UV spectra,molar conductivity,TGDTA.In the complexes the carboxyl groups are coordinated to Ti(IV)in a monodentate manner,The inhibitory actions of the complexes on mice ear tumefaction caused by croton oil and the rat foot granulation growth produced by cotton wool are higher than those of the corresponding ligands HCin,HTzea and [(Cp)2TiCl2],while their toxicities are lower than those of the free ligands.ηη     

Olefin polymerization and copolymerization with soluble transition‐metal complex catalysts

Olefin polymerizations catalyzed by Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 1 – 5 ; Cp′ = cyclopentadienyl group), RuCl₂(ethylene)(pybox) { 7 ; pybox = 2,6‐bis[(4S)‐4‐isopropyl‐2‐oxazolin‐2‐yl]pyridine}, and FeCl₂(pybox) ( 8 ) were investigated in the presence of a cocatalyst. The Cp*TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 5 )–methylaluminoxane (MAO) catalyst exhibited remarkable catalytic activity for both ethylene and 1‐hexene polymerizations, and the effect of the substituents on the cyclopentadienyl group was an important factor for the catalytic activity. A high level of 1‐hexene incorporation and a lower r_E · r_H value with 5 than with [Me₂Si(C₅Me₄)(N^tBu)]TiCl₂ ( 6 ) were obtained, despite the rather wide bond angle of Cp Ti O (120.5°) of 5 compared with the bond angle of Cp Ti N of 6 (107.6°). The 7 –MAO catalyst exhibited moderate catalytic activity for ethylene homopolymerization and ethylene/1‐hexene copolymerization, and the resultant copolymer incorporated 1‐hexene. The 8 –MAO catalyst also exhibited activity for ethylene polymerization, and an attempted ethylene/1‐hexene copolymerization gave linear polyethylene. The efficient polymerization of a norbornene macromonomer bearing a ring‐opened poly(norbornene) substituent was accomplished by ringopening metathesis polymerization with the well‐defined Mo(CHCMe₂Ph)(N‐2,6‐ⁱPr₂C₆H₃)[OCMe(CF₃)₂]₂ ( 10 ). The key step for the macromonomer synthesis was the exclusive end‐capping of the ring‐opened poly(norbornene) with p‐Me₃SiOC₆H₄CHO, and the use of 10 was effective for this polymerization proceeding with complete conversion. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4613–4626, 2000     

Interaction of dimethyltin(IV) dichloride with 5′‐IMP and 5′‐UMP

The formation constants of the species formed in the systems H⁺ + dimethyltin(IV) + 5′‐IMP and 5′‐UMP, H⁺ + 5′‐IMP and H⁺ + 5′‐UMP have been determined in aqueous solution in the pH range 1.5–9.5 at constant temperature (25 °C) and constant ionic strength (0.1 mol dm⁻³ NaClO₄), using spectrophotometric and potentiometric techniques. ¹H and ³¹P NMR investigations in aqueous solution confirmed the species formation. The precipitated complexes of IMP and UMP by Me₂Sn(IV)²⁺ at low pH values were characterized by elemental analysis and FTIR spectroscopy methods, the bonding sites of the ligands were determined and ruled out purine and pyrimidine moieties (N‐7 and N‐1 in IMP and N‐3 in UMP, respectively) while a bidentated coordination of the phosphate group is concluded in both cases. Finally, the experiments revealed the existence of complexes with trigonal bipyramidal structures that is in agreement with similar systems resulted previously. Copyright © 2008 John Wiley & Sons, Ltd.     

Half‐titanocene complexes bearing dianionic 6‐benzimidazolylpyridyl‐2‐carboximidate ligands: Synthesis,characterization, and their ethylene polymerization

6‐Benzimidazolylpyridyl‐2‐carboximidic half‐titanocene complexes, Cp′TiLCl (Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = 6‐benzimidazolylpyridine‐2‐carboxylimidic, C1–C13 ), were synthesized and characterized along with single‐crystal X‐ray diffraction. The half‐titanocene chlorides containing substituted cyclopentadienyl groups, especially pentamethylcyclopentadienyl groups were more stable, while those without substituents on the cyclopentadienyl groups were easily transformed into their dimeric oxo‐bridged complexes, (CpTiL)₂O ( C14 and C15 ). In the presence of excessive amounts of methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all half‐titanocene complexes showed high catalytic activities for ethylene polymerization. The substituents on the Cp groups affected the catalytic behaviors of the complexes significantly, with less substituents favoring increased activities and higher molecular weights of the resultant polyethylenes. Effects of reaction conditions on catalytic behaviors were systematically investigated with catalytic systems of mononuclear C1 and dimeric C14 . With C1 /MAO, large MAO amount significantly increases the catalytic activity, while the temperature only has a slight effect on the productivity. In the case of C14 /MAO catalytic system, temperature above 60 °C and Al/Ti value higher than 5000 were necessary to observe good catalytic activities. In both systems, higher reaction temperature and low cocatalyst amount gave the polyethylenes with higher molecular weights. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3396–3410, 2008     

Chlorido(dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate‐κ2N,N′)(η5‐pentamethylcyclopentadienyl)rhodium(III) chloride 1‐hydroxypyrrolidine‐2,5‐dione disolvate

The title complex, [Rh(C₁₀H₁₅)Cl(C₁₄H₁₂N₂O₄)]Cl·2C₄H₅NO₃, has been synthesized by a substitution reaction of the precursor [bis(2,5‐dioxopyrrolidin‐1‐yl) 2,2′‐bipyridine‐4,4′‐dicarboxylate]chlorido(pentamethylcyclopentadienyl)rhodium(III) chloride with NaOCH₃. The Rh^III cation is located in an RhC₅N₂Cl eight‐coordinated environment. In the crystal, 1‐hydroxypyrrolidine‐2,5‐dione (NHS) solvent molecules form strong hydrogen bonds with the Cl⁻ counter‐anions in the lattice and weak hydrogen bonds with the pentamethylcyclopentadienyl (Cp*) ligands. Hydrogen bonding between the Cp* ligands, the NHS solvent molecules and the Cl⁻ counter‐anions form links in a V‐shaped chain of Rh^III complex cations along the c axis. Weak hydrogen bonds between the dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate ligands and the Cl⁻ counter‐anions connect the components into a supramolecular three‐dimensional network. The synthetic route to the dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate‐containing rhodium complex from the [bis(2,5‐dioxopyrrolidin‐1‐yl) 2,2′‐bipyridine‐4,4′‐dicarboxylate]rhodium(III) precursor may be applied to link Rh catalysts to the surface of electrodes.     

N‐(2‐benzimidazolylquinolin‐8‐yl)benzamidate half‐titanocene chlorides: Synthesis,characterization and their catalytic behavior toward ethylene polymerization

A series of N‐(2‐benzimidazolyquinolin‐8‐yl)benzamidate half‐titanocene chlorides, Cp′TiLCl ( C1 – C8 : Cp′ = C₅H₅, MeC₅H₄, or C₅Me₅; L = N‐(benzimidazolyquinolin‐8‐yl)benzamides)), was synthesized by the KCl elimination reaction of half‐titanocene trichlorides with the correspondent potassium N‐(2‐benzimidazolyquinolin‐8‐yl)benzamide. These half‐titanocene complexes were fully characterized by elemental and NMR analyses, and the molecular structures of complexes C2 and C8 were determined by the single‐crystal X‐ray diffraction. The high stability of the pentamethylcyclopentadienyl complex ( C8 ) was evident by no decomposing nature of its solution in air for one week. The oxo‐bridged dimeric complex ( C9 ) was isolated from the solution of the corresponding cyclopentadienyl complex ( C3 ) solution in air. Complexes C1 – C8 exhibited good to high catalytic activities toward ethylene polymerization and ethylene/α‐olefin copolymerization in the presence of methylaluminoxane (MAO) cocatalyst. In the typical catalytic system of C1/ MAO, the polymerization productivities were enhanced with either elevating reaction temperature or increasing the ratio of MAO to titanium precursor. In general, it was observed that higher the catalytic activity of the catalytic system lower the molecular weight of polyethylene. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3154–3169, 2009     

Ring Contraction by NHC‐Induced Pnictogen Abstraction

The reaction of [Cp′′′Co(η⁴‐P₄)] ( 1 ) (Cp′′′=1,2,4‐tBu₃C₅H₂) with ^MeNHC (^MeNHC=1,3,4,5‐tetramethylimidazol‐2‐ylidene) leads through NHC‐induced phosphorus cation abstraction to the ring contraction product [(^MeNHC)₂P][Cp′′′Co(η³‐P₃)] ( 2 ), which represents the first example of an anionic CoP₃ complex. Such NHC‐induced ring contraction reactions are also applicable for triple‐decker sandwich complexes. The complexes [(Cp*Mo)₂(μ,η^6:6‐E₆)] ( 3 a , 3 b ) (Cp*=C₅Me₅; E=P, As) can be transformed to the complexes [(^MeNHC)₂E][(Cp*M)₂(μ,η^3:3‐E₃)(μ,η^2:2‐E₂)] ( 4 a , 4 b ), with 4 b representing the first structurally characterized example of an NHC‐substituted As^I cation. Further, the reaction of the vanadium complex [(Cp*V)₂(μ,η^6:6‐P₆)] ( 5 ) with ^MeNHC results in the formation of the unprecedented complexes [(^MeNHC)₂P][(Cp*V)₂(μ,η^6:6‐P₆)] ( 6 ), [(^MeNHC)₂P][(Cp*V)₂(μ,η^5:5‐P₅)] ( 7 ) and [(Cp*V)₂(μ,η^3:3‐P₃)(μ,η^1:1‐P{^MeNHC})] ( 8 ).