Tetraphenylethylene‐based Glycoconjugate as a Fluorescence “Turn‐On” Sensor for Cholera Toxin

Tetraphenylethylene (TPE)‐based glycoconjugates were easily synthesized by copper(I)‐catalyzed “click reactions” between propargyl‐attached TPE and azido‐functionalized sugars. The TPE compound bearing lactosyl moieties ( Lac‐TPE ) was found to be a fluorescence “turn‐on” sensor for cholera toxin by virtue of aggregation‐induced emission characteristics of the TPE motif owing to the specific interaction of lactose with the cholera toxin B subunit, whilst a cellobiose‐functionalized TPE derivative did not show any response to the toxin. Therefore, Lac‐TPE shows promising applications in the detection of cholera toxin, as well as in the investigation of carbohydrate–protein interaction.     

A 1,3‐Indandione‐Functionalized Tetraphenylethene: Aggregation‐Induced Emission,Solvatochromism, Mechanochromism,and Potential Application as a Multiresponsive Fluorescent Probe

A tetraphenylethene (TPE) derivative substituted with the electron‐acceptor 1,3‐indandione (IND) group was designed and prepared. The targeted IND‐TPE reserves the intrinsic aggregation‐induced emission (AIE) property of the TPE moiety. Meanwhile, owing to the decorated IND moiety, IND‐TPE demonstrates intramolecular charge‐transfer process and pronounced solvatochromic behavior. When the solvent is changed from apolar toluene to highly polar acetonitrile, the emission peak redshifts from 543 to 597 nm. IND‐TPE solid samples show an evident mechanochromic process. Grinding of the as‐prepared powder sample induces a redshift of emission from green (peak at 515 nm) to orange (peak at 570 nm). The mechanochromic process is reversible in multiple grinding–thermal annealing and grinding–solvent‐fuming cycles, and the emission of the solid sample switches between orange (ground) and yellow (thermal/solvent‐fuming‐treated) colors. The mechanochromism is ascribed to the phase transition between amorphous and crystalline states. IND‐TPE undergoes a hydrolysis reaction in basic aqueous solution, thus the red‐orange emission can be quenched by OH^? or other species that can induce the generation of sufficient OH^?. Accordingly, IND‐TPE has been used to discriminatively detect arginine and lysine from other amino acids, due to their basic nature. The experimental data are satisfactory. Moreover, the hydrolyzation product of IND‐TPE is weakly emissive in the resultant mixture but becomes highly blue‐emissive after the illumination for a period by UV light. Thus IND‐TPE can be used as a dual‐responsive fluorescent probe, which may extend the application of TPE‐based molecular probes in chemical and biological categories.     

Diels–Alder Polymer Networks with Temperature‐Reversible Cross‐Linking‐Induced Emission

A novel synthetic strategy gives reversible cross‐linked polymeric materials with tunable fluorescence properties. Dimaleimide‐substituted tetraphenylethene (TPE‐2MI), which is non‐emissive owing to the photo‐induced electron transfer (PET) between maleimide (MI) and tetraphenylethene (TPE) groups, was used to cross‐link random copolymers of methyl (MM), decyl (DM) or lauryl (LM) methacrylate with furfuryl methacrylate (FM). The mixture of copolymer and TPE‐2MI in DMF showed reversible fluorescence with “on/off” behavior depending on the Diels–Alder (DA)/retro‐DA process, which is easily adjusted by temperature. At high temperatures, the retro‐DA reaction is dominant, and the fluorescence is quenched by the photo‐induced electron transfer (PET) mechanism. In contrast, at low temperatures, the emission recovers as the DA reaction takes over. A transparent PMFM/TPE‐2MI polymer film was prepared which shows an accurate response to the external temperature and exhibited tunable fluorescent “turn on/off” behavior. These results suggest the possible application in areas including information security and transmission. An example of invisible/visible writing is given.     

Aggregation‐Induced Emission and Aggregation‐Promoted Photo‐oxidation in Thiophene‐Substituted Tetraphenylethylene Derivative

Aggregation‐induced emission combined with aggregation‐promoted photo‐oxidation has been reported only in two works quite recently. In fact, this phenomenon is not commonly observed for AIE‐active molecules. In this work, a new tetraphenylethylene derivative (TPE‐4T) with aggregation‐induced emission (AIE) and aggregation‐promoted photo‐oxidation was synthesized and investigated. The pristine TPE‐4T film exhibits strong bluish‐green emission, which turns to quite weak yellow emission after UV irradiation. Interestingly, after solvent treatment, the weakly fluorescent intermediate will become bright‐yellow emitting. Moreover, the morphology of the TPE‐4T film could be regulated by UV irradiation. The wettability of the TPE‐4T microcrystalline surface is drastically changed from hydrophobic to hydrophilic. This work contributes a new member to the aggregation induced photo‐oxidation family and enriches the photo‐oxidation study of tetraphenylethylene derivatives.     

A Versatile Naphthalimide–Sulfonamide‐Coated Tetraphenylethene: Aggregation‐Induced Emission Behavior,Mechanochromism, and Tracking Glutathione in Living Cells

A tetraphenylethene (TPE) derivative substituted with a sulfonyl‐based naphthalimide unit ( TPE‐Np ) was designed and synthesized. Its optical properties in solution and in the solid state were investigated. Photophysical properties indicated that the target molecule, TPE‐Np , possessed aggregation‐induced emission (AIE) behavior, although the linkage between TPE and the naphthalimide unit was nonconjugated. Additionally, it exhibited an unexpected, highly reversible mechanochromism in the solid state, which was attributed to the change in manner of aggregation between crystalline and amorphous states. On the other hand, a solution of TPE‐Np in a mixture of dimethyl sulfoxide/phosphate‐buffered saline was capable of efficiently distinguishing glutathione (GSH) from cysteine and homocysteine in the presence of cetyltrimethylammonium bromide. Furthermore, the strategy of using poly(ethylene glycol)–polyethylenimine (PEG‐PEI) nanogel as a carrier to cross‐link TPE‐Np to obtain a water‐soluble PEG‐PEI/ TPE‐Np nanoprobe greatly improved the biocompatibility, and this nanoprobe could be successfully applied in the visualization of GSH levels in living cells.     

Synthesis and Characterization of Water‐Soluble Conjugated Glycopolymer for Fluorescent Sensing of Concanavalin A

A neutral polyfluorene derivative that contains 20 mol % 2,1,3‐benzothiadiazole (BT) is synthesized by Suzuki cross‐coupling polymerization. A cationic conjugated polymer A and an α‐mannose‐bearing polymer B are subsequently obtained through different post‐polymerization methods. As a result of the charged pendant groups or sugar‐bearing groups attached to the polymer side chains, both A and B show good water‐solubility. The titration of Concanavalin A (Con A) into polymer aqueous solution leads to different fluorescent responses for polymers A and B . Polymer A does not show any obvious fluorescence change upon interaction with Con A, whereas polymer B shows fluorescence increase in BT emission intensity when Con A is added. This is because of the specific interaction between α‐mannose and Con A, which induces polymer aggregation, and then facilitates energy transfer from the phenylene–fluorene segments to the BT units. A practical calibration curve ranging from 1 nM to 250 nM is obtained by correlating the changes in BT emission intensity with Con A concentration. The advantage of polymer B ‐based Con A macromolecular probe is that it shows signal increase upon Con A recognition, which is significantly different from other conjugated polymer‐based fluorescence quenching assays.     

Monodentate AIEgen Anchored on Metal‐Organic Framework for Fast Fluorescence Sensing of Phosphate

Herein, a novel sensor (TPE‐UiO‐66) was designed via anchoring monodentate tetraphenylethylene (TPE) onto UiO‐66 framework. The combination of the distinct aggregation‐induced emission (AIE) of TPE and the easy replacement of monodentate linker by guest phosphate, makes TPE‐UiO‐66 an ideal platform for sensing HPO₄^2–. Experimental results indicate that TPE‐UiO‐66 can selectively sense HPO₄^2– from other common anions. The limit of detection (LOD) can reach to 5.56 μmol·L^–1 and more importantly, TPE‐UiO‐66 also exhibits an ultra‐fast equilibrium response of 2 min, far faster than those of other sensors especially for UiO‐66‐NH₂. The combination of experimental analysis and density functional theory (DFT) calculations demonstrates that the high selectivity, high sensitivity and fast response of HPO₄^2– detection by TPE‐UiO‐66 can be attributed to the stronger coordination interactions of HPO₄^2– with Zr‐O cluster of UiO‐66 than that of TPE molecule. This study not only provides a potential probe for phosphate, but also represents a novel strategy to design stimuli‐responsive fluorescent MOF‐based sensors via using monodentate AIEgens.     

Novel Functional Conjugative Hyperbranched Polymers with Aggregation‐Induced Emission: Synthesis Through One‐Pot “A2+B4” Polymerization and Application as Explosive Chemsensors and PLEDs

With the aim to develop new tetraphenylethylene (TPE)‐based conjugated hyperbranched polymer, TPE units, one famous aggregation‐induced emission (AIE) active group, are utilized to construct hyperbranched polymers with three other aromatic blocks, through an “A₂+B₄” approach by using one‐pot Suzuki polycondensation reaction. These three hyperbranched polymers exhibit interesting AIEE behavior and act as explosive chemsensors with high sensitivity both in the nanoparticles and solid states. This is the first report of the AIE activity of the TPE‐based conjugated hyperbranched polymers. Their corresponding PLED devices also demonstrate good performance.     

Optical Properties and Photo‐Oxidation of Tetraphenylethene‐Based Fluorophores

We report the optical properties of tetraphenylethene (TPE) and other TPE derivatives functionalised with an octyl group (TPE‐OCT) and polyethyleneglycol group (TPE‐PEG) in the side chain. We compared TPE‐OCT and TPE‐PEG with TPE in both organic solvents and under aqueous conditions. All materials exhibit aggregation‐induced emission, however, uncommonly, TPE‐PEG seems to aggregate in aqueous solution with enhanced photoluminescence quantum efficiency (PLQE) relative to that in organic solvents. All three materials can be photo‐oxidised in solution to their diphenylphenanthrene derivative by irradiation with UV light (at both ≈1 and ≈5 mW cm^?2), with a subsequent enhancement in PL efficiency. The electron‐donating ether group increases the rate of oxidation relative to bare TPE and also photo‐oxidation was shown to be solvent and concentration dependent. Finally, photo‐oxidation was also demonstrated in the aggregate state.     

A Red to Near‐IR Fluorogen: Aggregation‐Induced Emission,Large Stokes Shift,High Solid Efficiency and Application in Cell‐Imaging

A tetraphenylethene (TPE) derivative modified with the strong electron acceptor 2‐dicyano‐methylene‐3‐cyano‐4,5,5‐trimethyl‐2,5‐dihydrofuran (TCF) was obtained in high yield by a simple two‐step reaction. The resultant TPE‐TCF showed evident aggregation‐induced emission (AIE) features and pronounced solvatochromic behavior. Changing the solvent from apolar cyclohexane to highly polar acetonitrile, the emission peak shifted from 560 to 680 nm (120 nm redshift). In an acetonitrile solution and in the solid powder, the Stokes shifts are as large as 230 and 190 nm, respectively. The solid film emits red to near‐IR (red‐NIR) fluorescence with an emission peak at 670 nm and a quantum efficiency of 24.8 %. Taking the advantages of red‐NIR emission and high efficiency, nanoparticles (NPs) of TPE‐TCF were fabricated by using tat‐modified 1,2‐distearoylsn‐glycero‐3‐phosphor‐ethanol‐amine‐N‐[methoxy‐(polyethyl‐eneglycol)‐2000] as the encapsulation matrix. The obtained NPs showed perfect membrane penetrability and high fluorescent imaging quality of cell cytoplasm. Upon co‐incubation with 4,6‐diamidino‐2‐phenylindole (DAPI) in the presence of tritons, the capsulated TPE‐TCF nanoparticles could enter into the nucleus and displayed similar staining properties to those of DAPI.     

Decomposition‐Assembly of Tetraphenylethylene Nanoparticles With Uniform Size and Aggregation‐Induced Emission property

Tetraphenylethylene (TPE)‐substituted poly(allylamine hydrochloride) (PAH‐g‐TPE) is synthesized by a Schiff base reaction between PAH and TPE‐CHO. The PAH‐g‐TPE forms micelles in water at pH 6, which are further transformed into pure TPE‐CHO nanoparticles (NPs) with a diameter of ≈300 nm after incubation in a solution of low pH value. In contrast, only amorphous precipitates are obtained when TPE‐CHO methanol solution is incubated in water. The aggregation‐induced emission feature of the TPE molecule is completely retained in the TPE NPs, which can be internalized into cells and show blue fluorescence. Formation mechanism of the TPE NPs is proposed by taking into account the guidance effect of linear and charged PAH molecules, and the propeller‐stacking manner between the TPE‐CHO molecules.     

Fluorogenic Thorium Sensors Based on 2,6‐Pyridinedicarboxylic Acid‐Substituted Tetraphenylethenes with Aggregation‐Induced Emission Characteristics

A novel fluorescent sensor based on tetraphenylethene (TPE) modified with 2,6‐pyridinedicarboxylic acid (PDA) that shows aggregation‐induced emission (AIE) characteristics for thorium recognition with remarkable fluoresence enhancement response has been synthesized. This sensor is capable of visually distinguishing Th⁴⁺ among lanthanides, transition metals, and alkali metals under UV light. Th⁴⁺ can be detected by the naked eye at ppb levels owing to the AIE phenomenon. The sensor showed high selectivity for Th⁴⁺ compared to all other metals tested, and this recognition displayed good anti‐interference qualities. This study represents the first application of a AIE fluorescence sensor in actinide metal recognition and it has potential applications in environmental systems for thorium ion detection.     

Anion‐Coordination‐Induced Turn‐On Fluorescence of an Oligourea‐Functionalized Tetraphenylethene in a Wide Concentration Range

A tetrakis(bisurea)‐decorated tetraphenylethene (TPE) ligand ( L² ) was designed, which, upon coordination with phosphate ions, displays fluorescence “turn‐on” over a wide concentration range, from dilute to concentrated solutions and to the solid state. The fluorescence enhancement can be attributed to the restriction of the intramolecular rotation of TPE by anion coordination. The crystal structure of the A₄L₂ (A=anion) complex of L² with monohydrogen phosphate provides direct evidence for the coordination mode of the anion. This “anion‐coordination‐induced emission” (ACIE) is another approach for fluorescence turn‐on in addition to aggregation‐induced emission (AIE).     

Visualization of Atom Transfer Radical Polymerization by Aggregation‐Induced Emission Technology

Aggregation‐induced emission (AIE) technology has been demonstrated to be a facile approach for in‐situ monitoring atom transfer radical polymerization (ATRP). A series of tertraphenyl ethylene (TPE)‐containing α‐bromo compounds were synthesized and applied as ATRP initiators. The photoluminescent (PL) emission of the polymerization system is proved to be sensitive to the local viscosity owing to the AIE characteristics of TPE. Linear relationships between the resulting molecular weight M_n and PL intensity were observed in several polymerization systems with different monomers, indicating the variability of this technique. Compared to physical blending, the chemical bonding of the TPE group in the chain end has higher sensitivity and accuracy to the polymer segments and the surrounding environment. This work promoted the combination of the AIE technique and controlled living radical polymerization, and introduced such an optical research platform to the ATRP polymerization process.     

Aggregation‐Induced Emission Characteristics of o‐Carborane‐Functionalized Tetraphenylethylene Luminogens: The Influence of Carborane Cages on Photoluminescence

Tetraphenylethylene (TPE)–carborane hybrids are constructed, and the impact of carborane substituents on the aggregation‐induced emission (AIE) characteristics of TPE‐cores has been investigated. When altering the 2‐R‐group on the carborane unit with ‐H, ‐CH₃ or phenyl group, the luminescent quantum yield of the corresponding TPE derivatives can be manipulated from 0.18 to 0.63 in the solid state. The emission color exhibits an obvious 100 nm shift (from blue to yellow).     

Highly Sensitive and Selective Detection of Nitrophenolic Explosives by Using Nanospheres of a Tetraphenylethylene Macrocycle Displaying Aggregation‐Induced Emission

A tetraphenylethylene (TPE) Schiff‐base macrocycle showing an aggregation‐induced emission (AIE) effect has been synthesized, which could aggregate into nanospheres and emit yellow fluorescence in aqueous media. By virtue of its AIE effect, the macrocycle showed a sensitive and selective response to 2,4,6‐trinitrophenol (TNP) and 2,4‐dinitrophenol (DNP) among a number of nitroaromatic compounds, which could be used to detect TNP and DNP at nanomolar levels. Moreover, it exhibited a superamplified quenching effect with DNP but not with TNP, providing a possible means of discriminating these two compounds. In comparison with open‐chain TPE Schiff‐bases, the cavity of the macrocycle is essential for the selectivity for DNP over TNP. In addition, quantitative analyses of both DNP and TNP in real water samples and qualitative detection of these two analytes in the solid state by the macrocycle have been tested. The reliability of the quantitative analysis has been confirmed by HPLC. Our findings demonstrate that the TPE Schiff‐base macrocycle has great potential as an excellent sensor for DNP and TNP.     

From Dark to Light to Fluorescence Resonance Energy Transfer (FRET): Polarity‐Sensitive Aggregation‐Induced Emission (AIE)‐Active Tetraphenylethene‐Fused BODIPY Dyes with a Very Large Pseudo‐Stokes Shift

The work presented herein is devoted to the fabrication of large Stokes shift dyes in both organic and aqueous media by combining dark resonance energy transfer (DRET) and fluorescence resonance energy transfer (FRET) in one donor–acceptor system. In this respect, a series of donor–acceptor architectures of 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) dyes substituted by one, two, or three tetraphenylethene (TPE) luminogens were designed and synthesised. The photophysical properties of these three chromophore systems were studied to provide insight into the nature of donor–acceptor interactions in both THF and aqueous media. Because the generation of emissive TPE donor(s) is strongly polarity dependent, due to its aggregation‐induced emission (AIE) feature, one might expect the formation of appreciable fluorescence emission intensity with a very large pseudo‐Stokes shift in aqueous media when considering FRET process. Interestingly, similar results were also recorded in THF for the chromophore systems, although the TPE fragment(s) of the dyes are non‐emissive. The explanation for this photophysical behaviour lies in the DRET. This is the first report on combining two energy‐transfer processes, namely, FRET and DRET, in one polarity‐sensitive donor–acceptor pair system. The accuracy of the dark‐emissive donor property of the TPE luminogen is also presented for the first time as a new feature for AIE phenomena.     

A Triazatruxene‐Based Glycocluster as a Fluorescent Sensor for Concanavalin A

A new triazatruxene‐based fluorescent glycocluster has been designed, synthesized, and fully characterized by NMR spectroscopy and mass spectrometry. Furthermore, its specific and selective binding properties with concanavalin A (Con A) have been investigated by fluorescence spectroscopy, circular dichroism (CD) spectroscopy, and turbidity assay. The obtained results showed that the multivalent mannose‐modified triazatruxene exhibited specific binding with Con A, but no binding to peanut agglutinin (PNA) lectin or bovine serum albumin (BSA), corresponding to a two‐orders‐of‐magnitude higher affinity than that of monovalent mannose ligands. Most interestingly, a fluorescence enhancement of the triazatruxene‐based glycocluster was observed upon binding with Con A because of hydrophobic interactions involving sites close to the triazatruxene moiety. Furthermore, the inhibitory ability of the triazatruxene‐based glycocluster against ORN178‐ induced haemagglutination has been investigated by haemagglutination inhibition assay. The results indicated selective binding with ORN178.     

A New Tetraphenylethylene‐Derived Fluorescent Probe for Nitroreductase Detection and Hypoxic‐Tumor‐Cell Imaging

The fluorescence detection of nitroreductase (NTR) and evaluation of the hypoxia status of tumor cells are vital, not only for clinical diagnoses and therapy, but also for biomedical research. Herein, we report the synthesis and application of a new fluorometric “turn‐on” probe for the detection of NTR ( TPE?NO₂ ) that takes advantage of the aggregation‐induced emission of tetraphenylethylene. TPE?NO₂ can detect NTR at concentrations as low as 5 ng mL^?1 in aqueous solution. The detection mechanism relied on the aggregation and deaggregation of tetraphenylethylene molecules. Moreover, this fluorescent probe can be used to monitor the hypoxia status of tumor cells through the detection of endogenous NTR.     

Photoassisted Synthesis of Luminescent Mannose–Au Nanodots for the Detection of Thyroglobulin in Serum

We have employed mannose‐modified gold nanodots (Man–Au NDs) as a luminescence sensor for the detection of the thyroid‐cancer marker thyroglobulin (Tg) in homogeneous solutions. The luminescent Man–Au NDs are prepared through the reaction of 2.9 nm‐diameter gold nanoparticles (Au NPs) with 11‐mercapto‐3,6,9‐trioxaundecyl‐α‐D ‐mannopyranoside (Man‐RSH) under the irradiation of a light‐emitting diode (LED). We have found that the irradiation enhances the quantum yield (～11 %), alters the emission wavelength and lifetimes, and shortens the preparation time. A luminescence assay has been developed for Tg based on the competition between Tg and Man–Au NDs for the interaction with the concanavalin A (Con A). Because luminescence quenching of the Man–Au NDs by Con A is inhibited by Tg selectivity, we have obtained a highly sensitive and selective assay for Tg.