Ultrafast Photoinduced Charge Separation Leading to High‐Energy Radical Ion‐Pairs in Directly Linked Corrole–C60 and Triphenylamine–Corrole‐C60 Donor–Acceptor Conjugates

Closely positioned donor–acceptor pairs facilitate electron‐ and energy‐transfer events, relevant to light energy conversion. Here, a triad system TPACor‐C₆₀ , possessing a free‐base corrole as central unit that linked the energy donor triphenylamine ( TPA ) at the meso position and an electron acceptor fullerene (C₆₀) at the β‐pyrrole position was newly synthesized, as were the component dyads TPA‐Cor and Cor‐C₆₀ . Spectroscopic, electrochemical, and DFT studies confirmed the molecular integrity and existence of a moderate level of intramolecular interactions between the components. Steady‐state fluorescence studies showed efficient energy transfer from ¹ TPA* to the corrole and subsequent electron transfer from ¹corrole* to fullerene. Further studies involving femtosecond and nanosecond laser flash photolysis confirmed electron transfer to be the quenching mechanism of corrole emission, in which the electron‐transfer products, the corrole radical cation ( Cor^?+ in Cor‐C₆₀ and TPA‐Cor^?+ in TPACor‐C₆₀ ) and fullerene radical anion (C₆₀^??), could be spectrally characterized. Owing to the close proximity of the donor and acceptor entities in the dyad and triad, the rate of charge separation, k_CS, was found to be about 10¹¹ s^?1, suggesting the occurrence of an ultrafast charge‐separation process. Interestingly, although an order of magnitude slower than k_CS, the rate of charge recombination, k_CR, was also found to be rapid (k_CR≈10¹⁰ s^?1), and both processes followed the solvent polarity trend DMF>benzonitrile>THF>toluene. The charge‐separated species relaxed directly to the ground state in polar solvents while in toluene, formation of ³corrole* was observed, thus implying that the energy of the charge‐separated state in a nonpolar solvent is higher than the energy of ³corrole* being about 1.52 eV. That is, ultrafast formation of a high‐energy charge‐separated state in toluene has been achieved in these closely spaced corrole–fullerene donor–acceptor conjugates.     

Photosynthetic Antenna‐Reaction Center Mimicry with a Covalently Linked Monostyryl Boron‐Dipyrromethene–Aza‐Boron‐Dipyrromethene–C60 Triad

An efficient functional mimic of the photosynthetic antenna‐reaction center has been designed and synthesized. The model contains a near‐infrared‐absorbing aza‐boron‐dipyrromethene (ADP) that is connected to a monostyryl boron‐dipyrromethene (BDP) by a click reaction and to a fullerene (C₆₀) using the Prato reaction. The intramolecular photoinduced energy and electron‐transfer processes of this triad as well as the corresponding dyads BDP‐ADP and ADP‐C₆₀ have been studied with steady‐state and time‐resolved absorption and fluorescence spectroscopic methods in benzonitrile. Upon excitation, the BDP moiety of the triad is significantly quenched due to energy transfer to the ADP core, which subsequently transfers an electron to the fullerene unit. Cyclic and differential pulse voltammetric studies have revealed the redox states of the components, which allow estimation of the energies of the charge‐separated states. Such calculations show that electron transfer from the singlet excited ADP (¹ADP*) to C₆₀ yielding ADP^.+‐C₆₀^.? is energetically favorable. By using femtosecond laser flash photolysis, concrete evidence has been obtained for the occurrence of energy transfer from ¹BDP* to ADP in the dyad BDP‐ADP and electron transfer from ¹ADP* to C₆₀ in the dyad ADP‐C₆₀. Sequential energy and electron transfer have also been clearly observed in the triad BDP‐ADP‐C₆₀. By monitoring the rise of ADP emission, it has been found that the rate of energy transfer is fast (≈10¹¹ s^?1). The dynamics of electron transfer through ¹ADP* has also been studied by monitoring the formation of C₆₀ radical anion at 1000 nm. A fast charge‐separation process from ¹ADP* to C₆₀ has been detected, which gives the relatively long‐lived BDP‐ADP^.+C₆₀^.? with a lifetime of 1.47 ns. As shown by nanosecond transient absorption measurements, the charge‐separated state decays slowly to populate mainly the triplet state of ADP before returning to the ground state. These findings show that the dyads BDP‐ADP and ADP‐C₆₀, and the triad BDP‐ADP‐C₆₀ are interesting artificial analogues that can mimic the antenna and reaction center of the natural photosynthetic systems.     

meso‐Free Corroles: Syntheses,Structures, Properties,and Chemical Reactivities

5,10‐Bis(pentafluorophenyl)corrole ( 5 ) and 5,15‐bis(pentafluorophenyl)corrole ( 9 ) have been synthesized as meso‐free corroles by rational synthetic routes. Both the structures of these corroles have been unambiguously revealed by X‐ray diffraction analysis and their optical and electrochemical properties have been studied. Chlorination and oxidative dimerization of 5 and 9 have been explored, which revealed a marked different reactivity of the free meso‐positions in 5 and 9 . 10‐Chlorinated corrole 11 was effectively prepared by the reaction of 9 with Palau‘chlor in the presence of 1 % pyridine whereas 5‐chlorinated corrole 12 was obtained in a trace amount from similar chlorination of 5 . 5,5′‐Linked corrole dimer 13 was produced by reaction of 5 with AgNO₂ in a good yield, whereas 10,10′‐linked corrole dimer 14 was formed in a moderate yield by the reaction of 9 with [bis(trifluoroacetoxy)iodo]benzene. Observed large electronic interaction between the two corroles in 13 as compared with that in 14 has been ascribed mainly to conformational flexibility of the former, which allows more coplanar conformation.     

Squarylium‐Triazine Dyad as a Highly Sensitive Photoradical Generator for Red Light

New dyads, based on squarylium dye and substituted‐triazine, were synthesized that exhibit an intramolecular photodissociative electron‐transfer reaction. The compounds were used as a red‐light photoradical generator. The photochemical activity of the dyad was compared to the corresponding unlinked systems (S+T) by determining the rate constant of electron transfer. The efficiency of the radical generation from the dyad compared to the unlinked system was demonstrated by measuring the maximum rate of free radical polymerization of acrylates in film. An excellent relationship between the rate of electron transfer and the rate of polymerization was found, evidencing the interest of this new approach to efficiently produce radicals under red light.     

Efficient Intramolecular Charge Transfer in Oligoyne‐Linked Donor–π–Acceptor Molecules

Studies are reported on a series of triphenylamine–(C?C)_n–2,5‐diphenyl‐1,3,4‐oxadiazole dyad molecules (n=1–4, 1 , 2 , 3 and 4 , respectively) and the related triphenylamine‐C₆H₄–(C?C)₃–oxadiazole dyad 5 . The oligoyne‐linked D–π–A (D=electron donor, A=electron acceptor) dyad systems have been synthesised by palladium‐catalysed cross‐coupling of terminal alkynyl and butadiynyl synthons with the corresponding bromoalkynyl moieties. Cyclic voltammetric studies reveal a reduction in the HOMO–LUMO gap in the series of compounds 1 – 4 as the oligoyne chain length increases, which is consistent with extended conjugation through the elongated bridges. Photophysical studies provide new insights into conjugative effects in oligoyne molecular wires. In non‐polar solvents the emission from these dyad systems has two different origins: a locally excited (LE) state, which is responsible for a π*→π fluorescence, and an intramolecular charge transfer (ICT) state, which produces charge‐transfer emission. In polar solvents the LE state emission vanishes and only ICT emission is observed. This emission displays strong solvatochromism and analysis according to the Lippert–Mataga–Oshika formalism shows significant ICT for all the luminescent compounds with high efficiency even for the longer more conjugated systems. The excited‐state properties of the dyads in non‐polar solvents vary with the extent of conjugation. For more conjugated systems a fast non‐radiative route dominates the excited‐state decay and follows the Engelman–Jortner energy gap law. The data suggest that the non‐radiative decay is driven by the weak coupling limit.     

Direct Evidence of Significantly Different Chemical Behavior and Excited‐State Dynamics of 1,7‐ and 1,6‐Regioisomers of Pyrrolidinyl‐Substituted Perylene Diimide

Novel bay‐functionalized perylene diimides with additional substitution sites close to the perylene core have been prepared by the reaction between 1,7(6)‐dibromoperylene diimide 6 (dibromo‐PDI) and 2‐(benzyloxymethyl)pyrrolidine 5 . Distinct differences in the chemical behaviors of the 1,7‐ and 1,6‐regioisomers have been discerned. While the 1,6‐dibromo‐PDI produced the corresponding 1,6‐bis‐substituted derivative more efficiently, the 1,7‐dibromo‐PDI underwent predominant mono‐debromination, yielding a mono‐substituted PDI along with a small amount of the corresponding 1,7‐bis‐substituted compound. By varying the reaction conditions, a controlled stepwise bis‐substitution of the bromo substituents was also achieved, allowing the direct synthesis of asymmetrical 1,6‐ and 1,7‐PDIs. The compounds were isolated as individual regioisomers. Fullerene (C₆₀) was then covalently linked at the bay region of the newly prepared PDIs. In this way, two separate sets of perylene diimide–fullerene dyads, namely single‐bridged (SB‐1,7‐PDI‐C₆₀ and SB‐1,6‐PDI‐C₆₀) and double‐bridged (DB‐1,7‐PDI‐C₆₀ and DB‐1,6‐PDI‐C₆₀), were synthesized. The fullerene was intentionally attached at the bay region of the PDI to achieve close proximity of the two chromophores and to ensure an efficient photoinduced electron transfer. A detailed study of the photodynamics has revealed that photoinduced electron transfer from the perylene diimide chromophore to the fullerene occurs in all four dyads in polar benzonitrile, and also occurs in the single‐bridged dyads in nonpolar toluene. The process was found to be substantially faster and more efficient in the dyads containing the 1,7‐regioisomer, both for the singly‐ and double‐bridged molecules. In the case of the single‐bridged dyads, SB‐1,7‐PDI‐C₆₀ and SB‐1,6‐PDI‐C₆₀, different relaxation pathways of their charge‐separated states have been discovered. To the best of our knowledge, this is the first observation of photoinduced electron transfer in PDI‐C₆₀ dyads in a nonpolar medium.     

Fullerene–Coumarin Dyad as a Selective Metal Receptor: Synthesis,Photophysical Properties,Electrochemistry and Ion Binding Studies

A coumarin derivative with a malonate unit has been synthesized and used for the preparation of a fullerene–coumarin dyad through the Bingel cyclopropanation method. The newly synthesized dyad is soluble in organic solvents and has been fully characterized with traditional spectroscopic techniques. Electronic interactions between the two components of the dyad were probed with the aid of UV/Vis spectroscopy, fluorescence emission, and electrochemistry measurements. Our studies clearly show the presence of electronic interactions between C₆₀ and modified coumarin in the ground state; efficient electron‐transfer quenching of the singlet excited state of the coumarin moiety by the appended fullerene sphere was also observed. Time‐resolved fluorescence measurements revealed lifetimes for the coumarin–C₆₀ dyad at a maximum of 50 ps, while the quantum yield was reaching unity. Additionally, the redox potentials of the C₆₀–coumarin dyad were determined and the energetics of the electron‐transfer processes were evaluated. Finally, after alkaline treatment of C₆₀–coumarin, which resulted in the deprotection of carboxylate units, the dyad was tested as a metal receptor for divalent metal cations; ion competition studies and fluorescence experiments showed binding selectivity for lead ions.     

Water‐soluble metalated and non‐metalated A2B‐ and A3‐corrole/amino acid conjugates: syntheses,characterization and properties

In this study, novel water‐soluble corrole amino acid conjugates were synthesized and characterized. The coupling reaction of A₂B‐ and A₃‐corroles with glycine ethyl ester and taurine under strong basic conditions proved to be successful and yielded di‐ and trifunctionalized corrole amino acid conjugates in good yields. The subsequent metalation of the corrole/amino acid conjugates broadens the scope for applications considerably. As examples, we herein show the catalytic activity of the Mn(III) A₃‐corrole towards O₂ evolution. First we employed tert‐butyl hydroperoxide (t‐BuOOH) as oxidant to obtain the Mn(V)oxo species and tetrabutyl ammonium hydroxide (TBAH) as hydroxide donor agent. Furthermore, the binding properties of the non‐metalated and the Mn(III) A₃‐corrole/amino sulfonic acid conjugates and transport of proteins were investigated and the conjugates exhibited binding to human serum albumin (HSA). Finally, a novel Ga(III) A₃‐corrole/amino sulfonic acid derivative was synthesized and we briefly describe the photophysical properties of this compound. Copyright © 2013 John Wiley & Sons, Ltd.     

Light Energy Collection in a Porphyrin–Imide–Corrole Ensemble

An assembly consisting of three units, that is, a meso‐substituted corrole ( C3 ), 1,8 naphthaleneimide ( NIE ), and a Zn porphyrin ( ZnP ), has been synthesized. NIE is connected to C3 through a 1,3‐phenylene bridge and to the ZnP unit through a direct C? C bond. The convergent synthetic strategy includes the preparation of a trans‐A₂B‐corrole possessing the imide unit, followed by Sonogashira coupling with a meso‐substituted A₃B‐porphyrin. The photophysical processes in the resulting triad ZnP-NIE-C3 are examined and compared with those of the corresponding C3-NIE dyad and the constituent reference models C3 , NIE , and ZnP . Excitation of the NIE unit in C3-NIE leads to a fast energy transfer of 98 % efficiency to C3 with a rate k_en=7.5×10¹⁰ s^?1, whereas excitation of the corrole unit leads to a reactivity of the excited state identical to that of the model C3 , with a deactivation rate to the ground state k=2.5×10⁸ s^?1. Energy transfer to C3 and to ZnP moieties follows excitation of NIE in the triad ZnP-NIE-C3 . The rates are k_en=7.5×10¹⁰ s^?1 and k_en=2.5×10¹⁰ s^?1 for the sensitization of the C3 and ZnP unit, respectively. The light energy transferred from NIE to Zn porphyrin unit is ultimately funneled to the corrole component, which is the final recipient of the excitation energy absorbed by the different components of the array. The latter process occurs with a rate k_en=3.4×10⁹ s^?1 and 89 % efficiency. Energy transfer processes take place in all cases by a Förster (dipole–dipole) mechanism. The theory predicts quite satisfactorily the rate for the ZnP/C3 couple, where components are separated by about 23 Å, but results in calculated rates that are one to two orders of magnitude higher for the couples NIE/ZnP (D/A) and NIE/C3, which are separated by distances of about 14 and 10 Å, respectively.     

Ultrafast Photoinduced Electron Transfer and Charge Stabilization in Donor–Acceptor Dyads Capable of Harvesting Near‐Infrared Light

To harvest energy from the near‐infrared (near‐IR) and infrared (IR) regions of the electromagnetic spectrum, which constitutes nearly 70 % of the solar radiation, there is a great demand for near‐IR and IR light‐absorbing sensitizers that are capable of undergoing ultrafast photoinduced electron transfer when connected to a suitable electron acceptor. Towards achieving this goal, in the present study, we report multistep syntheses of dyads derived from structurally modified BF₂‐chelated azadipyrromethene (ADP; to extend absorption and emission into the near‐IR region) and fullerene as electron‐donor and electron‐acceptor entities, respectively. The newly synthesized dyads were fully characterized based on optical absorbance, fluorescence, geometry optimization, and electrochemical studies. The established energy level diagram revealed the possibility of electron transfer either from the singlet excited near‐IR sensitizer or singlet excited fullerene. Femtosecond and nanosecond transient absorption studies were performed to gather evidence of excited state electron transfer and to evaluate the kinetics of charge separation and charge recombination processes. These studies revealed the occurrence of ultrafast photoinduced electron transfer leading to charge stabilization in the dyads, and populating the triplet states of ADP, benzanulated‐ADP and benzanulated thiophene‐ADP in the respective dyads, and triplet state of C₆₀ in the case of BF₂‐chelated dipyrromethene derived dyad during charge recombination. The present findings reveal that these sensitizers are suitable for harvesting light energy from the near‐IR region of the solar spectrum and for building fast‐responding optoelectronic devices operating under near‐IR radiation input.     

New and efficient arrays for photoinduced charge separation based on perylene bisimide and corroles

The bichromophoric systems C2-PI, C3-PI, and C3-PPI consisting of corrole and perylene bisimide units and representing one of the rare cases of elaborate structures based on corrole, have been synthesized. Corroles C2 and C3 are, respectively, meso-substituted corroles with 2,6-dichlorophenyl and pentafluorophenyl substituents at the 5 and 15 positions. The three dyads were prepared by divergent strategy with the corrole-forming reaction as the last step of the sequence. C2-PI and C3-PI differ in the nature of the corroles, whereas C3-PI differs from C3-PPI in the presence of a further phenyl unit in the linker between photoactive units. The dyads display spectroscopic properties which are the superposition of the component spectra, indicating a very weak electronic coupling. Excitation of the corrole unit leads to charge separation with a rate which decreases from 2.4 x 10(10), to 5.0 x 10(9), and to 4.9 x 10(7) s(-1) for C2-PI, C3-PI, and C3-PPI, respectively, where the reaction is characterized by a delta G degrees >0. Excitation of the perylene bisimide unit is followed by competing reactions of: 1) energy transfer to the corrole unit, which subsequently deactivates to the charge-separated state and; 2) electron transfer to directly form the charge-separated state. The ratio of electron-to-energy-transfer rates is 9:1 and 1:1 for C3-PI and C3-PPI, respectively. The yield of charge separation is essentially 100 % for C2-PI and C3-PI, and approximately 50 % (excitation of peryleneimide) or 15 % (excitation of the corrole) for C3-PPI. The lifetime of the charge-separated state, observed for the first time in corrole-based structures, is 540 ps for C2-PI, 2.5 ns for C3-PI, and 24 ns for C3-PPI, respectively. This is in agreement with an inverted behavior, according to Marcus theory.     

Excitation‐Wavelength‐Dependent,Ultrafast Photoinduced Electron Transfer in Bisferrocene/BF2‐Chelated‐Azadipyrromethene/Fullerene Tetrads

Donor–acceptor distance, orientation, and photoexcitation wavelength are key factors in governing the efficiency and mechanism of electron‐transfer reactions both in natural and synthetic systems. Although distance and orientation effects have been successfully demonstrated in simple donor–acceptor dyads, revealing excitation‐wavelength‐dependent photochemical properties demands multimodular, photosynthetic‐reaction‐center model compounds. Here, we successfully demonstrate donor– acceptor excitation‐wavelength‐dependent, ultrafast charge separation and charge recombination in newly synthesized, novel tetrads featuring bisferrocene, BF₂‐chelated azadipyrromethene, and fullerene entities. The tetrads synthesized using multistep synthetic procedure revealed characteristic optical, redox, and photo reactivities of the individual components and featured “closely” and “distantly” positioned donor–acceptor systems. The near‐IR‐emitting BF₂‐chelated azadipyrromethene acted as a photosensitizing electron acceptor along with fullerene, while the ferrocene entities acted as electron donors. Both tetrads revealed excitation‐wavelength‐dependent, photoinduced, electron‐transfer events as probed by femtosecond transient absorption spectroscopy. That is, formation of the Fc⁺–ADP–C₆₀^.? charge‐separated state upon C₆₀ excitation, and Fc⁺–ADP^.?–C₆₀ formation upon ADP excitation is demonstrated.     

Solid‐Phase Synthesis of Peptide Libraries Combining α‐Amino Acids with Inorganic and Organic Chromophores

The synthesis of two series of peptidic chains composed of bis(terpyridine)ruthenium(II) acceptor units and organic chromophores (coumarin, naphthalene, anthracene, fluorene) by stepwise solid‐phase peptide synthesis (SPPS) techniques is described. The first series of dyads comprises directly amide linked chromophores, while the second one possesses a glycine spacer between the two chromophores. All dyads were studied by UV/Vis and NMR spectroscopy, steady‐state luminescence, luminescence decay and electrochemistry, as well as by DFT calculations. The results of these studies indicate weak electronic coupling of the chromophores in the ground state. Absorpion spectra of all dyads are dominated by metal‐to‐ligand charge‐transfer (MLCT) bands around 500 nm. The bichromophoric systems, especially with coumarin as organic chromophore, display additional strong absorptions in the visible spectral region. All complexes are luminescent at room temperature (³MLCT). Efficient quenching of the fluorescence of the organic chromophore by the attached ruthenium complex is observed in all dyads. Excitation spectra indicate energy transfer from the organic dye to the ruthenium chromophore.     

Highly Efficient Singlet–Singlet Energy Transfer in Light‐Harvesting [60,70]Fullerene–4‐Amino‐1,8‐naphthalimide Dyads

New C₆₀ and C₇₀ fullerene dyads formed with 4‐amino‐1,8‐naphthalimide chromophores have been prepared by the Bingel cyclopropanation reaction. The resulting monoadducts were investigated with respect to their fluorescence properties (quantum yields and lifetimes) to unravel the role of the charge‐transfer naphthalimide chromophore as a light‐absorbing antenna and excited‐singlet‐state sensitizer of fullerenes. The underlying intramolecular singlet–singlet energy transfer (EnT) process was fully characterized and found to proceed quantitatively (Φ_EnT≈1) for all dyads. Thus, these conjugates are of considerable interest for applications in which fullerene excited states have to be created and photonic energy loss should be minimized. In polar solvents (tetrahydrofuran and benzonitrile), fluorescence quenching of the fullerene by electron transfer from the ground‐state aminonaphthalimide was postulated as an additional path.     

Improving the Photoinduced Charge Separation Parameters in Corrole–Perylene Carboximide Dyads by Tuning the Redox and Spectroscopic Properties of the Components

A couple of corrole–perylene carboximide dyads ( C2‐PIa and C2‐PIx ) have been synthesized and their photoreactivity has been evaluated. We aimed at obtaining better performances for photoinduced charge separation, both in terms of efficiency and in terms of lifetime, with respect to formerly studied systems. The energy level of the charge‐separated state was tuned by selecting perylene and corrole components with diverse redox and spectroscopic properties. High spectroscopic energy levels of the perylene carboximide derivatives (PIs) allow a fast charge separation to be maintained in competition with an energy‐transfer process from the PI to the corrole unit. Yields and lifetimes of charge separation in toluene are, respectively, 75 % and 2.5 μs for C2‐PIa and 65 % and 24 ns for C2‐PIx . The results and the effect of solvent polarity are discussed in the framework of current energy‐ and electron‐transfer theories.     

Pyridyl‐Substituted Corrole Isomers: Synthesis and their Regulation to G‐quadruplex Structures

G‐quadruplex DNA plays an important role in the potential therapeutic target for the design and development of anticancer drugs. As various G‐quadruplex sequences in the promoter regions or telomeres can form different secondary structural modes and display a diversity of biology functions, variant G‐quadruplex interactive agents may be necessary to cure different disease by differentiating variant types of G‐quadruplexes. We synthesize five cationic methylpyridylium corroles and compare the interactions of corroles with different types of G‐quadruplexes such as cmyc, htelo, and bcl2 by using surface plasmon resonance. Because of the importance of human telomere G‐quadruplex DNA, we focus on the biological properties of the interactions between human telomere G‐quadruplex DNA and corrole isomers using CD, T_m, PCR‐stop (PCR= polymerase chain reaction), and polymerase‐stop assay, which demonstrate the excellent ability of the corrole to induce and stabilize the G‐quadruplex. This study provides the first experimental insight into how selectivity might be achieved for different G‐quadruplexes by a single group of methylpyridylium corrole isomers that may be optimized for potential selective cancer therapy.     

Effect of Structure and Conformation on Fluorescence Properties in Novel Coumarin‐based Mannich Base Dyes

Twelve novel coumarin‐based Mannich base dyes have been synthesized via introducing functional aminomethyl group at the 8 position of coumarin ring by Mannich reaction and their chemical structures were confirmed by IR, ¹H NMR, MS and elemental analysis. Moreover, the fluorescence intensities and relative quantum yields of all the dyes were measured and studied. The results illustrated that the heavy atom effect was obvious in our designed system and there was a relationship between the structures, the conformations and the fluorescence spectra of the coumarins. Meanwhile, the present β‐CD titration experiment illustrated that the aniline nitrogen atom was closely related to the photoinduced electron transfer (PET) course and the PET course was carried out via a conformational control mechanism.     

Molecular design of corrole‐based D‐π‐A sensitizers for dye‐sensitized solar cell applications

First principles calculations based on density functional theory (DFT) have been performed to design a new set of donor‐corrole‐bridge‐acceptor type systems based on the gallium corroles for dye‐sensitized solar cell applications. The design strategy for these systems is based on the benchmark studies done on the experimentally tested aluminum, gallium, and tin metallocorroles. Unfortunately, corrole analogues display poor light to current conversion efficiencies in spite of their desirable photophysical properties. Thus, improving the efficiency of corrole analogues has become a major challenge and ways to identify solutions to this is of outstanding fundamental importance. This study shows the lack of charge directionality toward anchoring group as plausible reason for the poor efficiencies of reported corrole systems, which enabled us to fine‐tune the electronic and optical properties of new D‐π‐A type systems, COR1‐COR4. The molecular geometries, electronic structure, and binding orientation of these systems on TiO₂ surface were investigated using DFT, TD‐DFT, and PBC methods. When compared with the reported corroles, COR1‐COR4 have a smaller band gaps, red‐shifted absorption spectra with higher extinction coefficients (10⁵ M^?1 cm^?1) and improved nonlinear optical properties. Importantly, results revealed that these dyes bind with two‐arm mode to TiO₂ surface and the density of states of the dye@TiO₂ elucidate strong coupling between the dyes and TiO₂ surface. We anticipate that the unique photophysical properties of these sensitizers will trigger the experimental efforts to yield a new generation of sensitizers based on corrole macrocyle. © 2015 Wiley Periodicals, Inc.     

A Versatile Long‐Wavelength‐Absorbing Scaffold for Eu‐Based Responsive Probes

Coumarin‐sensitized, long‐wavelength‐absorbing luminescent Eu^III‐complexes have been synthesized and characterized. The lanthanide binding site consists of a cyclen‐based chelating framework that is attached through a short linker to a 7‐hydroxycoumarin, a 7‐B(OH)₂‐coumarin, a 7‐O‐(4‐pinacolatoboronbenzyl)‐coumarin or a 7‐O‐(4‐methoxybenzyl)‐coumarin. The syntheses are straightforward, use readily available building blocks, and proceed through a small number of high‐yielding steps. The sensitivity of coumarin photophysics to the 7‐substituent enables modulation of the antenna‐absorption properties, and thus the lanthanide excitation spectrum. Reactions of the boronate‐based functionalities (cages) with H₂O₂ yielded the corresponding 7‐hydroxycoumarin species. The same species was produced with peroxynitrite in a ×10⁶–10⁷‐fold faster reaction. Both reactions resulted in the emergence of a strong ≈407 nm excitation band, with concomitant decrease of the 366 nm band of the caged probe. In aqueous solution the methoxybenzyl caged Eu‐complex was quenched by ONOO^?. We have shown that preliminary screening of simple coumarin‐based antennae through UV/Vis absorption spectroscopy is possible as the changes in absorption profile translate with good fidelity to changes in Eu^III‐excitation profile in the fully elaborated complex. Taken together, our results show that the 7‐hydroxycoumarin antenna is a viable scaffold for the construction of turn‐on and ratiometric luminescent probes.     

Silver Corrole Complexes: Unusual Oxidation States and Near‐IR‐Absorbing Dyes

Macrocycles such as porphyrins and corroles have important functions in chemistry and biology, including light absorption for photosynthesis. Generation of near‐IR (NIR)‐absorbing dyes based on metal complexes of these macrocycles for mimicking natural photosynthesis still remains a challenging task. Herein, the syntheses of four new Ag^III corrolato complexes with differently substituted corrolato ligands are presented. A combination of structural, electrochemical, UV/Vis/NIR‐EPR spectroelectrochemical, and DFT studies was used to decipher the geometric and electronic properties of these complexes in their various redox states. This combined approach established the neutral compounds as stable Ag^III complexes, and the one‐electron reduced species of all the compounds as unusual, stable Ag^II complexes. The one‐electron oxidized forms of two of the complexes display absorptions in the NIR region, and thus they are rare examples of mononuclear complexes of corroles that absorb in the NIR region. The appearance of this NIR band, which has mixed intraligand charge transfer/intraligand character, is strongly dependent on the substituents of the corrole rings. Hence, the present work revolves round the design principles for the generation of corrole‐based NIR‐absorbing dyes and shows the potential of corroles for stabilizing unusual metal oxidation states. These findings thus further contribute to the generation of functional metal complexes based on such macrocyclic ligands.