Free‐Standing Gold‐Nanoparticle Monolayer Film Fabricated by Protein Self‐Assembly of α‐Synuclein

Free‐standing nanoparticle films are of great importance for developing future nano‐electronic devices. We introduce a protein‐based fabrication strategy of free‐standing nanoparticle monolayer films. α‐Synuclein, an amyloidogenic protein, was utilized to yield a tightly packed gold‐nanoparticle monolayer film interconnected by protein β‐sheet interactions. Owing to the stable protein–protein interaction, the film was successfully expanded to a 4‐inch diameter sheet, which has not been achieved with any other free‐standing nanoparticle monolayers. The film was flexible in solution, so it formed a conformal contact, surrounding even microspheres. Additionally, the monolayer film was readily patterned at micrometer‐scale and thus unprecedented double‐component nanoparticle films were fabricated. Therefore, the free‐floating gold‐nanoparticle monolayer sheets with these properties could make the film useful for the development of bio‐integrated nano‐devices and high‐performance sensors.     

Effects of the reaction parameters on the properties of thermosensitive poly(N‐isopropylacrylamide) microspheres prepared by precipitation and dispersion polymerization

Poly(N‐isopropylacrylamide) (PNIPAAm)‐based microspheres were prepared by precipitation and dispersion polymerization. The effects of several reaction parameters, such as the type and concentration of the crosslinker (N,N′‐methylenebisacrylamide or ethylene dimethacrylate), medium polarity, concentration of the monomer and initiator, and polymerization temperature, on the properties were examined. The hydrogel microspheres were characterized in terms of their chemical structure, size and size distribution, and morphological and temperature‐induced swelling properties. A decrease in the particle size was observed with increasing polarity of the reaction medium or increasing concentration of poly(N‐vinylpyrrolidone) as a stabilizer in the dispersion polymerization. The higher the content was of the crosslinking agent, the lower the swelling ratio was. Too much crosslinker gave unstable dispersions. Although the solvency of the precipitation polymerization mixture controlled the PNIPAAm microsphere size in the range of 0.2–1 μm, a micrometer range was obtained in the Shellvis 50 and Kraton G 1650 stabilized dispersion polymerizations of N‐isopropylacrylamide in toluene/heptane. Typically, the particles had fairly narrow size distributions. Copolymerization with the functional glycidyl methacrylate monomer afforded microspheres with reactive oxirane groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 968–982, 2006     

Preparation and characterization of porous polymeric microspheres obtained from multifunctional methacrylate monomers

Synthesis and properties of the new difunctional methacrylate monomer 2‐hydroxy‐3‐methacryloyloxypropoxybenzene are presented. This monomer was applied for the synthesis of porous microspheres. It was copolymerized with trimethylolpropane trimethacrylate in the presence of two pairs of pore‐forming diluents dodecane and toluene, and n‐decanol and toluene. Influence of diluents composition on their porous structures was studied. Thermal resistance and tendency to swell in different organic diluents for a chosen sample were also determined. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6165–6174, 2008     

Morphology engineering of a novel poly(L‐lactide)/poly(1,5‐dioxepan‐2‐one) microsphere system for controlled drug delivery

Morphology is presented as a powerful tool to control the in vitro degradation and drug release characteristics of novel drug delivery microspheres prepared from homopolymer blends of 1,5‐dioxepan‐2‐one, DXO, and L ‐lactide, L‐LA. Their performance in this respect was compared to analogous P(L‐LA‐co‐DXO) microspheres. Blends formed denser and less porous microspheres with a higher degree of matrix crystallinity than copolymers of corresponding L‐LA:DXO composition. The morphology differences of blends and copolymers, further adjustable by means of component ratio, are shown to have a vital impact on the in vitro performance. Sustained drug delivery was obtained from both copolymers and blends. Molecular weight loss was retarded and diffusion‐mediated release was inhibited in the latter case, further delaying the release process. The effects of storage on the physicochemical properties of these systems were evaluated under desiccated and moist conditions for 5 months. Storage‐induced physicochemical changes, such as matrix crystallization and molecular weight decrease, were accelerated at higher relative humidities. P(L‐LA‐co‐DXO) demonstrated higher moisture sensitivity than a PLLA‐PDXO blend of corresponding composition. The more crystalline and dense morphology of blend microspheres may thus be considered an improvement of the storage stability. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 786–796, 2000     

Synthesis and characterization of a microsphere‐based coating for textiles with potential as an in situ bioactive delivery system

Proteinaceous microspheres have a wide range of biomedical applications, including their use as drug delivery systems. On the other hand, bioactive and antimicrobial textiles are promising substrates for medical care, in particular, as wound‐dressings. This work relates the development of a new process for the functionalization of textiles through the simultaneous formation and linkage of protein‐based microspheres onto textile fibers by sonochemical techniques. The microspheres developed by this process possess antimicrobial properties by themselves, but other may be incorporated by the encapsulation of various pharmaceutical formulations. This new type of microspheres and particularly their fixation onto textile materials encourage the development of textiles that can be used as delivery systems in a simple, fast, and non‐toxic process. Here it is reported the production of microspheres with a combination of bovine serum albumin (BSA), L ‐Cysteine (L ‐Cys), and n‐dodecane, using the ultrasound technology. The size distribution and morphology of the microspheres was determined as a function of several parameters such as irradiation time and BSA and L ‐Cys concentrations. The produced microspheres were analyzed using a laser light scattering size analyzer, an optical microscope and a scanning electron microscope. The new coating of BSA + L ‐Cys microspheres revealed a high stability and excellent antibacterial properties being a promising alternative to design textile‐based bioactive delivery systems with potential application in the development of textile‐based wound‐dressings. Copyright © 2011 John Wiley & Sons, Ltd.     

Raft polymerization of N,N‐dimethylacrylamide from magnetic poly(2‐hydroxyethyl methacrylate) microspheres to suppress nonspecific protein adsorption

Nonspecific interaction is a key parameter affecting the efficiency of proteins, nucleic acids or cell separation. Currently, many approaches to introduce antifouling properties to materials have been developed. Among these, surface modification with polymer brushes plays a prominent role. The aim of this study was to synthesize new magnetic microspheres grafted with poly(N,N‐dimethylacrylamide) (PDMA) that resist nonspecific protein adsorption. Monodisperse macroporous poly(2‐hydroxyethyl methacrylate) (PHEMA) microspheres, 4 μm in size, were synthesized by a multiple swelling polymerization method. To render the microspheres magnetic, iron oxide was precipitated inside the microsphere pores. Functional carboxyl groups, introduced by the hydrolysis of the 2‐(methacryloyl)oxyethyl acetate (HEMA‐Ac) comonomer, were used to react with propargylamine, followed by coupling of a chain transfer agent via an azide‐alkyne click reaction. PDMA was grafted from the PHEMA microspheres using reversible addition‐fragmentation chain transfer polymerization (RAFT), resulting in surfaces with more than 81 wt % PDMA attached. The successful modification of the microspheres was confirmed by XPS. The magnetic microspheres grafted with PDMA showed excellent antifouling properties as tested in bovine serum protein solutions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1036–1043     

Poly(N,N‐diethylacrylamide) microspheres by dispersion polymerization

Poly(N,N‐diethylacrylamide)‐based microspheres were prepared by ammonium persulfate (APS)‐initiated and poly(vinylpyrrolidone) (PVP)‐stabilized dispersion polymerization. The effects of various polymerization parameters, including concentration of N,N′‐methylenebisacrylamide (MBAAm) crosslinker, monomer, initiator, stabilizer and polymerization temperature on their properties were elucidated. The hydrogel microspheres were described in terms of their size and size distribution and morphological and temperature‐induced swelling properties. While scanning electron microscopy was used to characterize the morphology of the microspheres, the temperature sensitivity of the microspheres was demonstrated by dynamic light scattering. The hydrodynamic particle diameter decreased sharply as the temperature reached a critical temperature ～ 30 °C. A decrease in the particle size was observed with increasing concentration of both the APS initiator and the PVP stabilizer. The microspheres crosslinked with 2–15 wt % of MBAAm had a fairly narrow size distribution. It was found that the higher the content of the crosslinking agent, the lower the swelling ratio. High concentration of the crosslinker gave unstable dispersions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6263–6271, 2008     

Polymer Structure‐Guided Self‐Assisted Preparation of Poly(ester‐thioether)‐Based Hollow Porous Microspheres and Hierarchically Interconnected Microcages for Drug Release

Porous polymer microspheres (PPMs) have been widely applied in various biomedical fields. Herein, the self‐assisted preparation of poly(ester‐thioether)‐based porous microspheres and hierarchical microcages, whose pore sizes can be controlled by varying the polymer structures, is reported. Poly(ester‐thioether)s with alkyl side chains (carbon atom numbers were 2, 4, and 8) can generate hollow porous microspheres; the longer alkyl chain length, the larger pore size of microspheres. The allyl‐modified poly(ester‐thioether) (PHBDT‐g‐C₃) can form highly open, hierarchically interconnected microcages. A formation mechanism of these PPMs is proposed; the hydrophobic side chains‐mediated stabilization of oil droplets dictate the droplet aggregation and following solvent evaporation, which is the key to the formation of PPMs. The hierarchically interconnected microcages of PHBDT‐g‐C₃ are due to the partially crosslinking of polymers. Pore sizes of PPMs can be further tuned by a simple mixing strategy of poly(ester‐thioether)s with different pore‐forming abilities. The potential application of these PPMs as H₂O₂‐responsive vehicles for delivery of hydrophobic (Nile Red) and hydrophilic (doxorubicin hydrochloride) cargos is also investigated. The microspheres with larger pore sizes show faster in vitro drug release. The poly(ester‐thioether)‐based polymer microspheres can open a new avenue for the design of PPMs and provide a H₂O₂‐responsive drug delivery platform.     

Controlled Formation of Fluorescent Metalloporphyrin‐Containing Coordination Polymer Particles from Seed Structures by Designed Shape‐Transformation Reactions

Herein, nanorod structures and four‐leaf clover structures of fluorescent zinc 5,10,15,20‐tetra(4‐pyridyl)‐21H,23H‐porphine (ZnTPyP)‐containing coordination polymer particles (CPPs) were first synthesized by a bottom‐up strategy assisted by surfactants and then employed as seed structures for further shape‐transformation reactions. We have successfully designed the morphological transformation for different dimensions, achieving the controlled formation of octahedron structures at both the nanometer scale and micrometer scale from the seed structures. Our approach illustrates a new method to design and synthesize metalloporphyrin‐containing CPPs in a systematic and controllable manner.     

Facile Fabrication of Nanorod‐Assembled Fluorine‐Substituted Hydroxyapatite (FHA) Microspheres

Nanorod‐assembled FHA microspheres with different F contents were for the first time prepared through a facile one‐step hydrothermal method. The effect of the reaction time and pH value of reaction solutions on the FHA morphology was investigated to elucidate the self‐assembly process of FHA microspheres. The results showed pH values had significant effect on the morphology of the formed FHA crystals, which were self‐assembled into sphere‐like sturctures at high pH conditions and rod‐like structures at low pH values. The results suggested that formation of FHA crystals with varied morphology may be directly related to Ca²⁺ release kinetics from EDTA‐Ca‐Na₂ at different pH conditions. Furthermore, it was found that the chemical stability of FHA microspheres was dependent on the F content in the materials, and high F contents in FHA microspheres lead to improved chemical stability. These results suggest that the prepared self‐assembled FHA microspheres may be used for teeth substitution materials due to their unique hierarchical structures and controllable chemical stability.     

Amphiphilic depsipeptide‐based block copolymers as nanocarriers for controlled release of ibuprofen with doxorubicin

Well‐defined amphiphilic multiblock copolymers PDMAEMA‐b‐P(IBMD‐co‐PDO)‐b‐PEG‐b‐P(IBMD‐co‐PDO)‐b‐PDMAEMA [PDMAEMA‐PIBMD‐PPDO‐PEG], based on poly(2‐(dimethylamino)ethyl methacrylate) block (PDMAEMA), poly(3(S)‐isobutyl‐morpholine‐2,5‐dione‐co‐p‐dioxanone) block (P(IBMD‐co‐PDO)), and poly(ethylene glycol) block (PEG) were successfully synthesized by combination of ring‐opening polymerization (using 3(S)‐isobutyl‐morpholine‐2,5‐dione and p‐dioxanone initiated by hydroxyl end of PEG) and atom transfer radical polymerization (ATRP). Furthermore, all these copolymers were characterized by ¹H NMR, ¹³C NMR, Fourier transformed‐infrared, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis measurements. The degradation experiments showed that the molecular weight of PDMAEMA‐PIBMD‐PPDO‐PEG decreased along with degradation time. In addition, these copolymers could readily self‐assemble into nanosized microspheres in phosphate buffered solution. Ibuprofen (IBU) and doxorubicin (DOX) as a kind of combined model drugs were loaded into these microspheres by the combination of ionic interaction and hydrophobic effect. These copolymer microspheres exhibited high loading capacity (LC, up to 26.88%), encapsulation efficiency (EE, up to 61.29%), and sustained release behavior of IBU–DOX in phosphate buffered solution. The results of transmission electron microscopy and dynamic light scattering showed that the microspheres were well‐defined uniform spherical particles with average diameter less than 120 nm. Therefore, it can be envisaged that these copolymer systems are promising candidates for controlled release application. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3213–3226     

Solid Supramolecular Architecture of a Perylene Diimide Derivative for Fluorescent Enhancement

A new p‐phenylenevinylene‐linked perylene diimide has been synthesized and self‐assembled for the formation of zero‐dimensional molecular aggregate structures of nanospheres and vesicles through solvent tuning. The solid‐state optical properties induced by a special wavelength laser were studied and the results indicated excellent fluorescent enhancement properties. The emission intensity of these aggregates increased with elongation of the laser irradiation time. Based on the analysis of variable‐temperature ¹H NMR spectra, DFT calculations, and the single‐crystal structure of the linkage group, a conformation‐dependent fluorescent enhancement mechanism could be demonstrated. The mechanism is different from the fluorescent bleaching of normal solid‐state fluorescent materials and offers potential applications in optical devices.     

Green‐emitting poly[(1,3‐phenylenevinylene)‐alt‐ (1,4‐phenylenevinylene)]s: Effect of the substitution patterns on the optical properties

Green‐emitting substituted poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)]s ( 6 ) were synthesized via the Wittig–Horner reaction. The polymers were yellow resins with molecular weights of 10,600. The ultraviolet–visible (UV–vis) absorption of 6 (λ_max = 332 or 415 nm) was about 30 nm redshifted from that of poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,4‐phenylenevinylene)] ( 2 ) but was only 5 nm redshifted with respect to that of poly[(1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)] ( 1 ). A comparison of the optical properties of 1 , 2 , and 6 showed that substitution on m‐ or p‐phenylene could slightly affect their energy gap and luminescence efficiency, thereby fine‐tuning the optical properties of the poly[(m‐phenylene vinylene)‐alt‐(p‐phenylene vinylene)] materials. The vibronic structures were assigned with the aid of low‐temperature UV–vis and fluorescence spectroscopy. Light‐emitting‐diode devices with 6 produced a green electroluminescence output (emission λ_max ～ 533 nm) with an external quantum efficiency of 0.32%. Substitution at m‐phenylene appeared to be effective in perturbing the charge‐injection process in LED devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1820–1829, 2004     

Molecularly imprinted ionic liquid magnetic microspheres for the rapid isolation of organochlorine pesticides in environmental water

A new type of molecularly imprinted ionic liquid magnetic microspheres was synthesized by aqueous suspension polymerization, using 4,4′‐dichlorobenzhydrol as a dummy template, and 1‐allyl‐3‐ethylimidazolium hexafluorophosphate and methacrylic acid as co‐functional monomers. The results of morphology and magnetic property evaluation of the obtained microspheres demonstrated that it was monodispersed spherical, possessed a rough surface, and an outstanding magnetic properties. Binding experiments revealed that it had a substantial adsorption capacity and strong recognition ability to organochlorine pesticides (OCPs) in aqueous solution. Then the microspheres were applied as an adsorbent of magnetic dispersive solid‐phase extraction for the selective recognition and rapid determination of OCPs in environmental water. Under the optimum conditions, good linearity of the three types of OCPs (dicofol, tetradifon, and p,p′‐dichlorodiphenyldichloroethane) was achieved in the range of 1.0–100 ng/mL (r ≥ 0.9994). The recoveries at three spiking levels ranged from 82.6 to 100.4% with the RSDs less than 6.9%.     

Fast reversed‐phase liquid chromatographic separation of proteins by flow‐through poly(styrene‐co‐divinylbenzene) microspheres

With the explosive growth of the bioscience and biopharmaceuticals, the demand for high efficient analysis and separation of proteins is urgent. High‐performance liquid chromatography is an appropriate technology for this purpose, and the stationary phase is the kernel to the separation efficiency. In this study, flow‐through poly(styrene‐co‐divinylbenzene) microspheres characteristic of the binary pores, i.e. flow‐through pores and mesopores, were synthesized; this special porous structure would benefit the convective mass transfer while guarantee the high specific surface area. Owing to the hydrophobic nature, poly(styrene‐co‐divinylbenzene) microspheres were suitable as the reversed‐phase stationary phase for separation of proteins. For the high permeability of the poly(styrene‐co‐divinylbenzene) microspheres packed column, fast separation of the studied six proteins in ～2 min was achieved. The recoveries of studied proteins were acceptable in the range of 79.0–99.4%. The proposed column had good pH stability of 1–13 and repeatability. Moreover, the column was applied for egg white fast separation, further demonstrating its applicability for complex bio‐sample separation. The flow‐through poly(styrene‐co‐divinylbenzene) microspheres were promising for fast separation of large molecules.     

Optical properties and orientation in polyethylene blown films

We report structural factors affecting the optical properties of blown polyethylene films. Two types of blown polyethylene films of similar degrees of crystallinity were made from (1) single‐site‐catalyst high‐density polyethylene (HDPE; STAR α) and (2) Ziegler–Natta‐catalyst HDPE (ZN) resins. The STAR α film exhibited high clarity and gloss, whereas the ZN film was turbid. Small‐angle X‐ray scattering (SAXS), small‐angle light scattering (SALS), and optical microscopy gave quantitative and qualitative information regarding structure and orientation in the films. A new approach is described for determining the three‐dimensional lamellar normal orientation from SAXS. Both the clear STAR α and turbid ZN films had similar lamellar crystalline structures and long periods but displayed different degrees of orientation. It is demonstrated that optical haze is related to surface features that seem to be linked to the bulk morphology. The relationship between haze and structural orientation is described. The lamellar orientation is linked to rodlike structures seen in optical microscopy and SALS through a stacked lamellar or cylindrite morphology on a nanometer scale and through a fiberlike morphology on a micrometer scale. The micrometer‐scale, rodlike structures seem directly related to surface roughness in a comparison of index‐matched immersion and surface micrographs. The higher haze and lower gloss of the ZN film was caused by extensive surface roughness not observed in the STAR α film. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2923–2936, 2001     

Effect of reaction parameters on the dispersion polymerization of 1‐vinyl‐2‐pyrrolidone

Nonporous hydrogel microspheres 0.1–1.3 μm in diameter were prepared by the dispersion copolymerization of 1‐vinyl‐2‐pyrrolidone and ethylene dimethacrylate as a crosslinking agent. The crosslinking was evidenced by solid state ¹³C NMR and elemental analysis. The effect of various parameters including selection of solvent (cyclohexane, butyl acetate), initiator (4,4′‐azobis(4‐cyanopentanoic acid), 2,2′‐azobisisobutyronitrile, dibenzoyl peroxide) and stabilizer on the properties of resulting microspheres has been studied. Dynamic light scattering and photographic examination were used for determination of the diameter and polydispersity of microspheres. Increasing concentration of steric stabilizer in the initial polymerization mixture decreased the particle size. The particle size depended on the molecular weight of polystyrene‐block‐hydrogenated polyisoprene stabilizer, but not on the number of PS and polybutadiene blocks in the styrene–butadiene block copolymer stabilizers. Dibenzoyl peroxide used as an initiator resulted in agglomeration of particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 653–663, 2000     

Preparation of silica microspheres with a broad pore size distribution and their use as the support for a coated cellulose derivative chiral stationary phase

A templating strategy using crosslinked and functionalized polymeric beads to synthesize silica microspheres with a broad pore size distribution has been developed. The polymer/silica hybrid microspheres were prepared by utilizing the combination of a templating weak cation exchange resin, a structure‐directing agent N‐trimethoxysilylpropyl‐N,N,N‐trimethylammonium chloride, and a silica precursor tetraethyl orthosilicate. The silica microspheres were then obtained after calcinating the hybrid microspheres. The as‐prepared materials were characterized by scanning electron microscopy, mercury intrusion porosimeter, and thermal gravimetric analysis. The results showed that the starting templating beads were about 5 μm in diameter and the formed silica microspheres were less than 3 μm with a pore size range of 10–150 nm, some pores were even extended to beyond 250 nm. It was demonstrated that cellulose tris(3,5‐dimethylphenylcarbamate) was readily coated onto the surface of the as‐synthesized silica microspheres without any additional surface pretreatment. The coated silica microspheres were uniformly dispersed even with high loading of the chiral stationary phase, which exhibited high resolution chiral separations in high‐performance liquid chromatography.     

Use of a new methacrylic monomer, 4,4′‐di(2‐hydroxy‐3‐methacryloyloxypropoxy)benzophenone,in the synthesis of porous microspheres

A new aromatic, tetrafunctional methacrylate monomer, 4,4′‐di(2‐hydroxy‐3‐methacryloyloxypropoxy)benzophenone, and its application to the synthesis of porous microspheres are presented. This new monomer was copolymerized with divinylbenzene in the presence of pore‐forming diluents. The properties of the obtained highly crosslinked microspheres were investigated as column packing for high‐performance liquid chromatography. Their porous structures in both dry and wet states were studied and compared with those of poly(divinylbenzene) and the less crosslinked copolymer of 2,3‐epoxypropyl methacrylate and divinylbenzene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7014–7026, 2006     

Monodisperse superparamagnetic pH‐sensitive single‐layer chitosan hollow microspheres with controllable structure

Facile strategy was developed for the fabrication of the monodisperse superparamagnetic pH‐sensitive single‐layer chitosan (CS) hollow microspheres with controllable structure. The carboxyl group‐functionalized polystyrene microspheres prepared by soap‐free emulsion polymerization were used as the templates. After the Fe₃O₄ nanoparticles were in situ formed onto the surface of the templates, the single‐layer CS was self‐assembled and cross‐linked with glutaraldehyde subsequently. Then, the magnetic single‐layer CS hollow microspheres were obtained after the templates were removed. It was found that the feeding ratio of the monomer acrylic acid in the soap‐free emulsion polymerization had played an important role on the particle size and surface carboxyl group content of the templates, which determined the particle size and shell thickness of the magnetic single‐layer CS hollow microspheres in the proposed strategy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010