Direct Observation of the Collision of Single Pt Nanoparticles onto Single‐Crystalline Gold Nanowire Electrodes

We observed the collision of single Pt nanoparticles (NPs) onto an Au nanowire (NW) electrode by using electrocatalytic amplification. Previously, such observations had typically been performed by using a microscale disk‐type ultramicroelectrode (UME). The use of a NW electrode decreased the background noise current and provided a shielding effect, owing to adsorption of the NPs onto the insulating sheath. Therefore, the transient current signal that was caused by the collision of single NPs could be more clearly distinguished from the background current by using a NW electrode instead of a UME. Furthermore, the use of a NW electrode increased the collisional frequency and the magnitude of the transient current signal. The experimental data were analyzed by using a theoretical model and a random walk simulation model.     

Facile Synthesis Of Composition‐Controllable PtPdAuTe Nanowires As Superior Electrocatalysts For Direct Methanol Fuel Cells

Multicomponent Pt‐based nanowires (NWs) have attracted widespread attention as eletrocatalysts toward direct alcohol fuel cells because of their unique one‐dimensional structure and high reaction dynamics. Quaternary PtPdAuTe NWs are designed via a facile template method, and NWs with a different composition are obtained by adjusting the feed ratio of metal precursors. The direct displacement reaction of metal precursors with Te NWs and the partial oxidation of Te lead to the formation of quaternary NWs. The rough surface and abundant reactive sites deriving from the rearrangement of metal atoms on the Te NWs surface endow the PtPdAuTe NWs with a superior electrocatalytic property and durability for methanol oxidation. The Pt₂₀Pd₂₀Au₁₀Te₅₀ NWs display the largest mass activity and best stability among all catalysts. The preparation of PtPdAuTe NWs could provide a viable strategy for the preparation of other multicomponent NWs.     

Stereoaligned Epitaxial Growth of Single‐Crystalline Platinum Nanowires by Chemical Vapor Transport

Epitaxial Pt nanowire (NW) arrays are synthesized for the first time by a chemical vapor transport method by using a metal halide as a precursor. Here we report that the epitaxial growth direction of NWs can be steered by seed crystal morphology. Octahedral seeds grow into inclined NWs possessing six growth directions, whereas half‐octahedral seeds grow into vertical and horizontal NWs. Interfacial energies between the seed material and the substrate are critical in determining the morphology of seed crystals. We also demonstrate that non‐SERS‐active Pt NWs can show strong surface‐enhanced Raman scattering (SERS) spectra by placing them on Ag films. The active SERS observation would help to elucidate platinum‐catalyzed chemical reactions.     

Single‐Molecule Nanocatalysis Shows In Situ Deactivation of Pt/C Electrocatalysts during the Hydrogen‐Oxidation Reaction

By coupling a Pt‐catalyzed fluorogenic reaction with the Pt‐electrocatalyzed hydrogen‐oxidation reaction (HOR), we combine single‐molecule fluorescence microscopy with traditional electrochemical methods to study the real‐time deactivation kinetics of a Pt/C electrocatalyst at single‐particle level during electrocatalytic hydrogen‐oxidation reaction. The decay of the catalytic performance of Pt/C could be mainly attributed to the electrocatalysis‐induced etching or dissolution of Pt nanoparticles. Spontaneous regeneration of activity and incubation period of the Pt electrocatalyst were also observed at single‐particle level. All these new insights are practically useful for the understanding and rational design of highly efficient electrocatalysts for application in fuel cells.     

Carbon Monoxide Oxidation on Pt Single Crystal Electrodes: Understanding the Catalysis for Low Temperature Fuel Cells

Herein the general concepts of fuel cells are discussed, with special attention to low temperature fuel cells working in alkaline media. Alkaline low temperature fuel cells could well be one of the energy sources in the next future. This technology has the potential to provide power to portable devices, transportation and stationary sectors. With the aim to solve the principal catalytic problems at the anode of low temperature fuel cells, a fundamental study of the mechanism and kinetics of carbon monoxide as well as water dissociation on stepped platinum surfaces in alkaline medium is discussed and compared with those in acidic media. Furthermore, cations involved as promoters for catalytic surface reactions are also considered. Therefore, the aim of the present work is not only to provide the new fundamental advances in the electrocatalysis field, but also to understand the reactions occurring at fuel cell catalysts, which may help to improve the fabrication of novel electrodes in order to enhance the performance and to decrease the cost of low temperature fuel cells.     

Designed Synthesis of Well‐Defined Pd@Pt Core–Shell Nanoparticles with Controlled Shell Thickness as Efficient Oxygen Reduction Electrocatalysts

Improving the electrocatalytic activity and durability of Pt‐based catalysts with low Pt content toward the oxygen reduction reaction (ORR) is one of the main challenges in advancing the performance of polymer electrolyte membrane fuel cells (PEMFCs). Herein, a designed synthesis of well‐defined Pd@Pt core–shell nanoparticles (NPs) with a controlled Pt shell thickness of 0.4–1.2 nm by a facile wet chemical method and their electrocatalytic performances for ORR as a function of shell thickness are reported. Pd@Pt NPs with predetermined structural parameters were prepared by in situ heteroepitaxial growth of Pt on as‐synthesized 6 nm Pd NPs without any sacrificial layers and intermediate workup processes, and thus the synthetic procedure for the production of Pd@Pt NPs with well‐defined sizes and shell thicknesses is greatly simplified. The Pt shell thickness could be precisely controlled by adjusting the molar ratio of Pt to Pd. The ORR performance of the Pd@Pt NPs strongly depended on the thickness of their Pt shells. The Pd@Pt NPs with 0.94 nm Pt shells exhibited enhanced specific activity and higher durability compared to other Pd@Pt NPs and commercial Pt/C catalysts. Testing Pd@Pt NPs with 0.94 nm Pt shells in a membrane electrode assembly revealed a single‐cell performance comparable with that of the Pt/C catalyst despite their lower Pt content, that is the present NP catalysts can facilitate low‐cost and high‐efficient applications of PEMFCs.     

Electrochemically Controlled Growth of AuPt Alloy Nanowires and Nanodendrites

The ability to control the morphology and phase structure of alloy nanowires is essential for the exploitation of their unique functional properties. This report describes the findings of an investigation of the growth mechanism in the electrochemically controlled growth of Au? Pt alloy nanostructures. By using a template‐free alternating‐current deposition method with different combinations of waveform, voltage, and frequency, controllability over the alloy morphology, composition, and phase structure has been clearly demonstrated for the growth of the nanostructures across the gap of two microelectrodes. The growth is proposed to involve an initial facet‐selective nucleation–growth process followed by two competing nucleation–growth pathways that are highly tunable by the applied frequency and voltage. The findings provided new insights into the mechanism that underlies the controlled fabrication of alloy nanowires and nanodendrites with structurally tailorable functional properties.     

Highly Catalytic Carbon Nanotube/Pt Nanohybrid‐Based Transparent Counter Electrode for Efficient Dye‐Sensitized Solar Cells

Low‐cost transparent counter electrodes (CEs) for efficient dye‐sensitized solar cells (DSSCs) are prepared by using nanohybrids of carbon nanotube (CNT)‐supported platinum nanoparticles as highly active catalysts. The nanohybrids, synthesized by an ionic‐liquid‐assisted sonochemical method, are directly deposited on either rigid glass or flexible plastic substrates by a facile electrospray method for operation as CEs. Their electrochemical performances are examined by cyclic voltammetry, current density–voltage characteristics, and electrochemical impedance spectroscopy (EIS) measurements. The CNT/Pt hybrid films exhibit high electrocatalytic activity for I^?/I₃^? with a weak dependence on film thickness. A transparent CNT/Pt hybrid CE film about 100 nm thick with a transparency of about 70 % (at 550 nm) can result in a high power conversion efficiency (η) of over 8.5 %, which is comparable to that of pyrolysis platinum‐based DSSCs, but lower cost. Furthermore, DSSC based on flexible CNT/Pt hybrid CE using indium‐doped tin oxide‐coated polyethylene terephthalate as the substrate also exhibits η=8.43 % with J_sc=16.85 mA cm^?2, V_oc=780 mV, and FF=0.64, and this shows great potential in developing highly efficient flexible DSSCs.     

Molecular Adsorbates at Single‐Crystal Platinum‐Group Metals and Bimetallic Surfaces

The surface orientation of Pt‐group metals determines the kind of organic species (such as CO, benzene and ethene) that will adsorb on them as well as the prevailing reaction channels. Pt and Pd as well as (sub)monolayers of them on Au are compared, including mono‐ and multiatomic rows of Pd on stepped Au surfaces. In general, Pd is less active for oxidation or hydrogenation of the adsorbates. Desorption of the intact molecule is favored because of a lower adsorption strength.     

Self-supported interconnected Pt nanoassemblies as highly stable electrocatalysts for low-temperature fuel cells

In it for the long haul: Clusters of Pt nanowires (3D Pt nanoassemblies, Pt?NA) serve as an electrocatalyst for low-temperature fuel cells. These Pt nanoassemblies exhibit remarkably high stability following thousands of voltage cycles and good catalytic activity, when compared with a commercial Pt?catalyst and 20?%?wt Pt?catalyst supported on carbon black (20?% Pt/CB).     

Oxygen‐Tolerant Electrodes with Platinum‐Loaded Covalent Triazine Frameworks for the Hydrogen Oxidation Reaction

Reducing the use of platinum (Pt) on polymer electrolyte fuel cell anodes is critical for the widespread dissemination of these energy conversion systems. Although Pt usage can be minimized by the even dispersion of isolated Pt atoms, no atomically dispersed Pt catalysts that promote hydrogen oxidation at a rate required for practical fuel cells have been reported to date. Covalent triazine frameworks with atomically dispersed Pt atoms (0.29 wt %) are described and it is demonstrated that the material has a high electrocatalytic hydrogen oxidation activity without an overpotential. Importantly, when the loading amount was increased to 2.8 wt %, the electrocatalytic hydrogen oxidation activity of the resulting electrode was comparable to that of commercial carbon supported 20 wt % Pt catalysts, and the catalytic activity for oxygen reduction was markedly reduced. Thus, Pt‐modified covalent triazine frameworks selectively catalyze hydrogen oxidation, even in the presence of dissolved oxygen, which is critical for limiting cathode degradation during the start–stop cycles of fuel cells.     

Large‐Scale Synthesis of Necklace‐Like Single‐Crystalline PbTiO3 Nanowires

Summary: We show in this communication that large‐scale necklace‐like single‐crystalline tetragonal perovskite PbTiO₃ nanowires can be obtained via a simple electrospinning method. The morphology and the crystal structure are investigated by SEM, XRD, and HRTEM. The length of the necklace‐like PbTiO₃ nanowires is from tens to several tens of micrometers, the wider the diameter of it is between 100 and 200 nm and the thinner the part is between 20 and 50 nm. The necklace‐like PbTiO₃ nanowires exhibit high surface photovoltage under the action of external electric field, which is probably applicable in displaying photoelectric devices of heterojunction structure.

SEM image of the electrospinning necklace‐like PbTiO₃ nanowires.     

One‐dimensional Nanomaterial Electrocatalysts for CO2 Fixation

Electroreduction of CO₂ into valuable molecules or fuels is a sustainable pathway for CO₂ reduction as well as energy storage. However, the premature development stage of electrocatalysts with high activity, selectivity, and durability still remains a significant bottleneck that hinders this field. One‐dimensional (1D) nanomaterials, including nanorods, nanotubes, nanoribbons, nanowires, and nanofibers, are generally considered as high‐activity and stable electromaterials, due to their unique uniform structures, orientated electronic and mass transport, and rigid tolerance to stress variation. During the past several years, 1D nanomaterials and nanostructures have been extensively studied due to their potentials in serving as CO₂ electroreduction catalysts. In this minireview, recent studies and advances in 1D nanomaterials for CO₂ eletroreduction are summarized, from the viewpoints of both computational and experimental aspects. Based on the composition, the 1D nanomaterials are studied in four categories, including metals, transition‐metal oxides/nitrides, transition‐metal chalcogenides, and carbon‐based materials. Different parameters in tuning 1D materials are also summarized and discussed, such as the crystal facets, grain boundaries, heteroatoms doping, additives and the electrochemical tuning effects. Finally, the challenges and prospects in this direction will be discussed.