Synthesis and photophysical properties of 2,5,8,11‐tetrakis(5‐hexylthiophen‐2‐yl)tetrathieno[2,3‐a:3′,2′‐c:2′′,3′′‐f:3′′′,2′′′‐h]naphthalene

The title compound, C₅₈H₆₄S₈, has been prepared by Pd‐catalysed direct C—H arylation of tetrathienonaphthalene (TTN) with 5‐hexyl‐2‐iodothiophene and recrystallized by slow evaporation from dichloromethane. The crystal structure shows a completely planar geometry of the TTN core, crystallizing in the monoclinic space group P2₁/c. The structure consists of slipped π‐stacks and the interfacial distance between the mean planes of the TTN cores is 3.456 (5) Å, which is slightly larger than that of the comparable derivative of tetrathienoanthracene (TTA) with 2‐hexylthiophene groups. The packing in the two structures is greatly influenced by both the aromatic core of the structure and the alkyl side chains.     

5,10‐dihydr­oxy‐5H,10H‐diimidazo[1,2‐a:1′,2′‐d]pyrazine

Crystallization of the title compound, C₈H₈N₄O₂, results in the formation of one‐dimensional chains of imidazole (im) mol­ecules linked together by strong hydrogen bonds. The O⋯N(im) separation and O—H(⋯N) distance are 2.6906 (17) and 1.74 (2) Å, respectively, and the O—H⋯N angle is 173 (2)°. The one‐dimensional chains are weakly π stacked along the b axis, with centroid‐to‐centroid separations of 3.678 (2) Å between five‐ and six‐membered rings and 3.963 (2) Å between six‐membered rings. Each mol­ecule is arranged around an inversion center.     

(E)‐2‐Methyl‐5‐(1‐naphthyl­methyl)­cinnamic acid

The title compound, C₂₁H₁₈O₂, crystallized in the centrosymmetric space group P2₁/n with one mol­ecule in the asymmetric unit. There is a single hydrogen bond, with an O_donor?O_acceptor distance of 2.624 (2) Å, which forms a cyclic dimer about a center of symmetry. The carboxyl group O atoms are ordered, while the carboxyl‐H atom is disordered. A single leading intermolecular C—H?O interaction has an H?O distance of 2.68 Å and a C—H?O angle of 178°; this interaction forms chains. Taken together with the hydrogen bond, it generates chains and rings. Structural comparisons are made with trans‐cinnamic acid and with 4‐methyl‐trans‐cinnamic acid.     

Revisiting the crystallization of poly(2‐alkyl‐2‐oxazoline)s

Poly(2‐alkyl‐2‐oxazoline)s (PAOx) exhibit different crystallization behavior depending on the length of the alkyl side chain. PAOx having methyl, ethyl, or propyl side chains do not show any bulk crystallization. Crystallization in the heating cycle, that is, cold crystallization, is observed for PAOx with butyl and pentyl side chains. For PAOx with longer alkyl side chains crystallization occurs in the cooling cycle. The different crystallization behavior is attributed to the different polymer chain mobility in line with the glass transition temperature (T_g) dependency on alkyl side chain length. The decrease in chain mobility with decreasing alkyl side chain length hinders the relaxation of the polymer backbone to the thermodynamic equilibrium crystalline structure. Double melting behavior is observed for PButOx and PiPropOx which is explained by the melt‐recrystallization mechanism. Isothermal crystallization experiments of PButOx between 60 and 90 °C and PiPropOx between 90 and 150 °C show that PAOx can crystallize in bulk when enough time is given. The decrease of T_g and the corresponding increase in chain mobility at T > T_g with increasing alkyl side chain length can be attributed to an increasing distance between the polymer backbones and thus decreasing average strength of amide dipole interactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 721–729     

The γ‐form of n‐eicosanol

In the crystal of the title compound, C₂₀H₄₂O, the mol­ecules are packed in layers parallel to the (100) plane. The alkyl chains are parallel to the [30] direction and these molecular chains are hydrogen‐bonded into chains parallel to the c axis. All C—C bonds of the alkyl chain show an antiperiplanar (trans) conformation, with a slight deviation from the ideal value (180°) in the C—C bonds close to the hydrogen bonds. The length of the alkyl chain is 27.92 (2) Å and the tilt angle is 59.7 (2)°.     

Racemic (1,4‐dioxan‐2‐yl)diphenylmethanol

The title compound, C₁₇H₁₈O₃, prepared by microwave irradiation of benzophenone and dioxane, crystallizes in a racemic mixture that forms one‐dimensional chains via strong hydrogen bonding of the hydroxy group to the adjacent symmetry‐generated 1,4‐dioxan‐2‐yl group; the O—H...O distance is 1.99 (3) Å and the O—H...O angle is 160 (2)°.     

Low‐dimensional compounds containing cyano groups. II. catena‐Poly[[(2,2′‐bipyridine‐κ2N:N′)(dicyanamido‐κN)copper(II)]‐μ‐dicyanamido‐κ2N:N′]

The crystal structure of the title compound, [Cu(C₂N₃)₂(C₁₀H₈N₂)]_n, is formed by neutral zigzag chains of the [–NC–N–CN–Cu{(bpy)N(CN)₂}–NC–N–CN–] type run­ning along the c axis (bpy is 2,2′‐bi­pyridine). The Cu atoms in the chains are pentacoordinated in the form of a distorted tetragonal pyramid, with a CuN₅ chromophore. The coordination sites are occupied by two N atoms of one bpy mol­ecule in the basal plane [Cu—N 2.018 (4) and 2.025 (2) Å] and by three terminal N atoms of two dicyan­amide ligands. One of the dicyan­amide ligands is coordinated in a monodentate fashion through a nitrile N atom in the basal plane [Cu—N 1.963 (4) Å]. The second acts as an end‐to‐end bridging ligand to a neighbouring Cu atom and is coordinated by one nitrile N atom in the basal plane [Cu—N 2.001 (2) Å], while the second nitrile N atom occupies the apical position [Cu—N 2.159 (2) Å] and originates from the bridge connecting another Cu atom. The shortest intrachain Cu?Cu distance is 8.212 (1) Å, as a consequence of the large bridging ligand, whereas the minimum interchain distance between Cu atoms is only 5.77 (7) Å, because of the interdigitation of the chains.     

[2,2′‐(1,3,5,8,10,12‐Hexaazacyclotetradecane‐3,10‐diyl)diethanol‐κ4N1,N5,N8,N12]bis(thiocyanato‐κS)copper(II)

In the crystal structure of the title compound, [Cu(NCS)₂(C₁₂H₃₀N₆O₂)], the Cu atom lies on an inversion centre and has an elongated octahedral coordination, with Cu—N distances of 2.004 (2) and 2.015 (2) Å, and a Cu—S distance of 2.9696 (10) Å. The 2,2′‐ethanol chains are axially oriented. The mol­ecules are linked to form a three‐dimensional network via O—H?N, N—H?O and N—H?S hydrogen bonds.     

Synthesis and Self‐Assembled Helical Supramolecular Polymer of Ethyl 7,8‐dihydro‐3‐hydroxy‐9‐methyl‐7‐(4′‐nitrophenyl)‐6H‐dibenzo[c]‐ pyran‐6‐one‐8‐carboxylate

A structurally novel compound was isolated as the main product of tandem Pechmann–dehydration between diethyl 4‐hydroxy‐4‐methyl‐2‐(4′‐nitrophenyl)‐6‐oxocyclohexane‐1,3‐dicarboxylate ( 1 ) and resorcinol in the presence of trifluoroacetic acid. The structure of the product was determined as a racemate of (7R,8R)‐ and (7S,8S)‐ethyl 7,8‐dihydro‐3‐hydroxy‐9‐methyl‐7‐(4′‐nitrophenyl)‐6H‐dibenzo[c]‐pyran‐6‐one‐8‐carboxylate ( 3a ) enantiomers by single crystal X‐ray diffraction analysis. The X‐ray crystal structure revealed that 3a possesses an extended and more stable conjugated aromatic system as a consequence of the stereoselectivity of intramolecular dehydration behavior of Pechmann condensation product 2 . In the crystal superstructure, the (7R,8R)‐ and (7S,8S)‐isomers of 3a respectively self‐assembled into left‐ and right‐handed supramolecular helical chains with a channel size of 3.70 Å × 10.20 Å in virtue of intermolecular hydrogen bonding together with dramatic twisting between carboxylate group at C8 and tricyclic ring framework of 3a , which are then arranged alternatively along the b‐axis direction with a pitch length of 7.894 Å.     

Pentamethylcyclopentadienyl(η6‐cyclooctatrienyl)ruthenium Tetrachlorozincate, [RuCp*(η6‐C8H10)]2ZnCl4

The crystal and molecular structures of the title compound, the first for a complex of the type [RuCp*(η⁶‐C₈‐ring)]⁺, is presented, the material being obtained serendipitously from a reaction between RuCl(cod)Cp* and 1‐ferrocenylbuta‐1,3‐diyne in the presence of ZnCl₂. <Ru‐C(Cp*)> (2.21 Å) is appreciably longer than in RuCp*₂ (2.18 Å) and similar to the value for the Ru‐η⁶ component (2.22 Å).     

A fluoresceinophane: 19,4,16‐trioxa‐1(2,10)‐anthracena‐2(1,2)‐benzenacyclohexadecaphane‐17,3(19H)‐dione

A novel macrocycle containing fluorescein, the highly fluorescent title compound, C₃₁H₃₂O₅, has a xanthene core and a benzyl unit that are planar. The latter is rotated by 72.99 (3)° from the xanthene mean plane. The C₁₁ alkyl tether and the xanthene group adopt a cage‐like structure and the xanthene adopts a quinoid‐type configuration. The compound crystallizes as a racemic mixture with one molecule of each isomer per unit cell. Even though the planes described by the xanthene and the benzene rings of different molecules are separated by 3.341 (4) and 3.73 (1) Å, respectively, there is insufficient overlap between the aryl units to promote π‐stacking.     

catena‐Poly[aquacopper(II)‐μ‐[N‐(1‐oxido‐2‐naphthylmethylene)glycinato‐O,N,O′:O′]]

In the title compound, [Cu(C₁₃H₉NO₃)(H₂O)]_n, the Cu^II ion is in a slightly distorted square‐pyramidal environment, with four short bonds in the basal plane formed by three donor atoms of the Schiff base and a water O atom. A symmetry‐related neighbouring mol­ecule provides an apical carboxylate O atom at a distance of 2.551 (3) Å; this contact leads to the formation of zigzag polymeric chains. In addition, the chain fragments are connected to each other by hydrogen bonding.     

4‐Iodoquinoline

Nearly planar molecules of the title compound, C₉H₆IN, are packed in inclined stacks along the short crystallographic b axis and molecules in adjacent stacks are packed to form antiparallel zigzag chains. Short intermolecular N...I contacts [3.131 (3) Å] are observed between molecules in adjacent stacks. A network of C—H...π hydrogen bonds [2.821 (5) and 3.083 (3) Å] between molecules in adjacent stacks is also present. These motif‐generating interactions, including the weak C—H...π interactions, are of relevance in crystal engineering and design.     

A Diacetylene‐Containing Wedge‐Shaped Compound: Synthesis,Morphology, and Photopolymerization

A novel wedge‐shaped compound containing two diacetylene tails, namely, methyl 3,5‐bis(trideca‐2,4‐diyn‐1yloxyl)benzoate (DDABM), was synthesized. As shown by UV/Vis spectroscopy this compound can be polymerized under UV irradiation. The crystalline structure of DDABM was investigated by grazing‐incidence wide‐angle X‐ray diffraction on oriented crystalline films deposited on PTFE‐rubbed silicon wafer substrates. Furthermore, the spherulites formed in thicker films were analyzed by wide‐angle X‐ray diffraction. A molecular packing model of DDABM based on the X‐ray diffraction data is proposed. The diacetylene units are oriented along a defined lattice direction with a reticular distance of 4.85 Å, which fulfills the requirements for topochemical polymerization. It was observed that UV polymerization does not affect the phase behavior of the compound, but mainly alters its optical properties.     

Intra‐ and intermolecular Se...X (X = Se,O) interactions in selenium‐containing heterocycles: 3‐benzoylimino‐5‐(morpholin‐4‐yl)‐1,2,4‐diselenazole

In the selenium‐containing heterocyclic title compound {systematic name: N‐[5‐(morpholin‐4‐yl)‐3H‐1,2,4‐diselenazol‐3‐ylidene]benzamide}, C₁₃H₁₃N₃O₂Se₂, the five‐membered 1,2,4‐diselenazole ring and the amide group form a planar unit, but the phenyl ring plane is twisted by 22.12 (19)° relative to this plane. The five consecutive N—C bond lengths are all of similar lengths [1.316 (6)–1.358 (6) Å], indicating substantial delocalization along these bonds. The Se...O distance of 2.302 (3) Å, combined with a longer than usual amide C=O bond of 2.252 (5) Å, suggest a significant interaction between the amide O atom and its adjacent Se atom. An analysis of related structures containing an Se—Se...X unit (X = Se, S, O) shows a strong correlation between the Se—Se bond length and the strength of the Se...X interaction. When X = O, the strength of the Se...O interaction also correlates with the carbonyl C=O bond length. Weak intermolecular Se...Se, Se...O, C—H...O, C—H...π and π–π interactions each serve to link the molecules into ribbons or chains, with the C—H...O motif being a double helix, while the combination of all interactions generates the overall three‐dimensional supramolecular framework.     

Steric effect and mobility of the alkyl chain in regio‐irregular poly‐3‐alkylthiophenes

The physicochemical properties of polyalkylthiophenes with various side‐chain length were widely investigated in order to reveal the functions of alkyl side‐chains in these polymers. The effects of the side‐chains on the properties of polyalkylthiophenes can be explained by their steric hindrance and mobility. The steric hindrance of alkyl chain affected not only the polymerization mechanism of the monomers but also the redox potential, interchain distance, charge transport properties, and film morphology. The mobility of the side‐chain influences the rate of dedoping, heat of transitions of polymers. The structure regio‐regularity, stability of polarons/bipolarons, film morphologies, and interchain interactions determine the optical and electric properties of polyalkylthiophenes. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1763–1772, 1999     

Combined experimental and computational modeling studies on 3,5‐dimethyl‐pyrazole‐1‐carbodithioic acid benzyl ester

The title compound, 3,5‐Dimethyl‐pyrazole‐1‐carbodithioic acid benzyl ester, has been synthesized and structurally characterized by X‐ray single crystal diffraction, elemental analysis, IR spectra, and UV‐Vis spectrum. The crystal belongs to orthorhombic, space group P212121, with a = 5.3829(15), b = 11.193(3), c = 21.824(6) Å, V = 1315.0(6) ų, and Z = 4. The molecules are connected via intermolecular C–H···N hydrogen bonds into 1D infinite chains. The crystal structure is consolidated by the intramolecular C–H···S hydrogen bonds. Furthermore, Density functional theory (DFT) calculations of the structure, stabilities, orbital energies, composition characteristics of some frontier molecular orbitals and Mulliken charge distributions of the title compound were performed by means of Gaussian 03W package and taking B3LYP/6‐31G(d) basis set. The time‐dependent DFT (TD‐DFT) calculations have been employed to calculate the electronic spectrum of the title compound, and the UV‐Vis spectra has been discussed on this basis. The results show that DFT method at B3LYP/6‐31G(d) level can well reproduce the structure of the title compound. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

(1,3‐Dimethylimidazolidine‐2‐selone‐κSe)bis(1,10‐phenanthroline‐κ2N,N′)copper(II) bis(perchlorate) and bis(2,2′‐bipyridyl‐κ2N,N′)(imidazolidine‐2‐thione‐κS)copper(II) bis(perchlorate)

In the first title salt, [Cu(C₁₂H₈N₂)₂(C₅H₁₀N₂Se)](ClO₄)₂, the Cu^II centre occupies a distorted trigonal–bipyramidal environment defined by four N donors from two 1,10‐phenanthroline (phen) ligands and by the Se donor of a 1,3‐dimethylimidazolidine‐2‐selone ligand, with the equatorial plane defined by the Se and by two N donors from different phen ligands and the axial sites occupied by the two remaining N donors, one from each phen ligand. The Cu—N distances span the range 1.980 (10)–2.114 (11) Å and the Cu—Se distance is 2.491 (3) Å. Intermolecular π–π contacts between imidazolidine rings and the central rings of phen ligands generate chains of cations. In the second salt, [Cu(C₁₀H₈N₂)₂(C₃H₆N₂S)](ClO₄)₂, the Cu^II centre occupies a similar distorted trigonal–bipyramidal environment comprising four N donors from two 2,2′‐bipyridyl (bipy) ligands and an S donor from an imidazolidine‐2‐thione ligand. The equatorial plane is defined by the S donor and two N donors from different bipy ligands. The Cu—N distances span the range 1.984 (6)–2.069 (7) Å and the Cu—S distance is 2.366 (3) Å. Intermolecular π–π contacts between imidazolidine and pyridyl rings form chains of cations. A major difference between the two structures is due to the presence in the second complex of two N—H...O hydrogen bonds linking the imidazolidine N—H hydrogen‐bond donors to perchlorate O‐atom acceptors.     

Theoretical Investigations on 4, 10‐Dinitro‐2, 6,8, 12‐tetraoxa‐4, 10‐diazatetracyclo[5.5.0.05, 903, 11]dodecane

Based on the full optimized molecular geometric structure at B3LYP/cc‐pvtz method, the newly designed compound 4, 10‐dinitro‐2, 6,8, 12‐tetraoxa‐4, 10‐diazatetracyclo[5.5.0.0^{5, 9}0^{3, 11}]dodecane (TEX) was investigated. Additionally, the IR spectrum, the thermal stability, and the detonation performance were predicted. The obtained crystal structure of TEX belongs to Pbca space group and lattice parameters are Z = 8, a = 8.614 Å, b = 12.877 Å, c = 26.065 Å, ρ = 2.015 g · cm^–3. Calculation results show that TEX has better detonation properties than HMX and is a high energy density compound with better stability.     

1,14‐Dioxa‐5,10‐di­aza‐2,3:12,13‐dibenzo­cyclo­octadeca‐2,12‐diene monohydrate

The title compound, C₂₂H₃₀N₂O₂·H₂O, is an 18‐membered di­aza‐crown ether ligand containing two ether O and two aza N atoms. In the macrocyclic ring, the mean N⋯O distance is 4.526 (4) Å. The macrocyclic inner‐hole size, estimated as twice the mean distance of the donor atoms from their centroid, is ∼2.29 Å.