Study on surface acid-base property of carboxylic acid-terminated self-assembled monolayers by cyclic voltammetry and electrochemical impedance spectroscopy

Cyclic voltammetry and electrochemical impedance spec-troscopy were used to study the surface acid-base property of carboxylic acid-terminated self-assembled monolayers(SAMs).A carboxylic acid-terminated thiol,such as thioctic acid(1,2-dithiolane-3-pentanoic acid),was self-assembled on gold electrodes.Electron transfer between the bulk solution and the SAM modified electrode was studied at different pH using Fe(CN)63-as a probe.The surface pka of thioctic acid was determined by cyclic voltammetry and electrochemical impedance spectroscopy to be 5.6 ±0.1 and 5.8±0.1,respectively.The method is compared with other methods of monolayer pKa measurement.     

Cytochrome c‐Based Amperometric Sensors for Superoxide Detection: Where Their Signal Comes From?

In a popular amperometric superoxide sensor, cytochrome c (Cyt c) is covalently immobilized onto a gold electrode previously covered with a self‐assembled monolayer (SAM) of carboxyl‐terminated alkanethiols. Therefore, a study was carried out to reveal the origins of the current response of such sensors. SAMs made of either 3,3′‐dithiodipropionic acid or 11‐mercaptoundecanoic acid and 11‐mercaptoundecanol were used to immobilize either Cyt c or an inert protein onto gold electrodes. The resulting modified electrodes were comparatively investigated by cyclic voltammetry and calibrated for superoxide detection. The obtained results bring evidence that significant part (>70 %) of the current response of the Cyt c‐modified electrodes to superoxide comes from direct oxidation of superoxide on gold (i.e. does not involve Cyt c).     

Direct Electrochemistry of Cytochrome c Covalently Immobilized on ω-Carboxyalkanethiol Monolayer Electrode and its Biosensor Applications

The study of direct electron transfer (ET) between solid electrodes and proteins or enzymes has been attracting considerable research interest for several decades since it represents a basic feature for the application of biocatalysts in chemical sensors and other electrical devices. We have been focusing our research interest on the use of SAMs for the study of diffusionless, direct electrochemistry of cytochromes. In the present paper, we report electrochemistry of cytochrome c covalently immobilized on ω-carboxyalkanethiol monolayer electrodes. A carboxylic acid terminated monolayer was utilized to provide an uniform surface for attaching cytochrome c, and characterization of the redox reaction of the protein was made with using cyclic voltammetric and electrochemical impedance measurements.     

Formation of amino‐terminated self‐assembled monolayers from long‐chain aminomethoxylsilanes

3‐Aminopropyltriethoxylsilane (APS), N‐[3‐(Trimethoxylsilyl)propyl]‐ethylenediamine, N‐[3‐(Trimethoxylsilyl)propyl]diethyenetriamine were assembled onto silicon surfaces. Using a mixture of acetone and water as solvent, factors which would affect the formation of amino‐terminated self‐assembled monolayers (SAMs), such as water content in solvent and reaction time, were investigated. The structural information of SAMs was collected from contact angle measurements, ellipsometric thickness measurements and X‐ray photoelectronic spectroscopy. Reaction time and water content in solvent produced dominant effects on the formation of amino terminated SAMs. The method introduced in this paper also presents a simple and controllable way to prepare amino‐terminated SAMS. Copyright © 2012 John Wiley & Sons, Ltd.     

High‐Quality Covalently Grafting Hemoglobin on Gold Electrodes: Characterization,Redox Thermodynamics and Bio‐electrocatalysis

Herein, we report a versatile surface chemistry methodology to covalently immobilize ligands and proteins to self‐assembled monolayers (SAMs) on gold electrode. The strategy is based on two steps: 1) the coupling of soluble azido‐PEG‐amimo ligand with an alkynyl‐terminated monolayer via click reaction and 2) covalent immobilization hemoglobin (Hb) to the amine‐terminated ligand via carbodiimide reaction. Surface‐enhanced Raman scattering spectroscopy (SERS), atomic force microscopy (AFM), reflection absorption infrared spectroscopy (RAIR) and cyclic voltammetry are used to characterize the model interfacial reactions. We also demonstrate the excellent biocompatibility of the interface for Hb immobilization and reliable application of the proposed method for H₂O₂ biosensing. Moreover, the redox thermodynamics of the Fe³⁺/Fe²⁺ couple in Hb is also investigated.     

Attachment of Amine‐ and Maleimide‐Containing Ferrocene Derivatives onto Self‐Assembled Alkanethiol and Alkanedithiol Monolayers: Voltammetric Evaluation of Cross‐Linking Efficiencies and Surface Coverage of Electroactive Groups

Ferrocene derivatives containing primary amines and maleimide groups were attached covalently onto N‐hydrosuccinimidyl (NHS)‐terminated alkanethiol self‐assembled monolayers (SAMs) and SAMs of alkanedithiol. The surface coverage and efficiencies of the two cross‐linking reactions were evaluated with cyclic voltammetry. All the ferrocene derivatives attached onto the alkanethiol or alkanedithiol SAMs exhibit reversible redox waves. The surface coverage of the aminated ferrocene groups was compared to that of N‐hydrosuccinimidyl (NHS)‐terminated alkanethiol SAM. The covalent attachment of β‐ferrocenylethylamine onto a 11,11′‐dithio‐bis(succinimidylundecanoate) SAM yielded an efficiency as high as 63.1%. The cross‐linking efficiency of this reaction was found to increase with the nucleophilicity of the amino groups. SAMs of longer alkyl chains favor the attachment of a greater number of ferrocene derivatives. As for the Michael‐type electrophilic addition between the sulfhydryl groups of the alkanedithiol SAMs and the ferrocenyl maleimide, the cross‐linking efficiencies were found to range from 6.5% to 25.7%, depending on the alkanedithiol chain length. The difference in the efficiencies between the two types of cross‐linking reactions might be partially attributable to the steric hindrance imposed by the SAMs and the relative sizes of the functional groups.     

Surface‐Tuned Electron Transfer and Electrocatalysis of Hexameric Tyrosine‐Coordinated Heme Protein

Molecular modeling, electrochemical methods, and quartz crystal microbalance were used to characterize immobilized hexameric tyrosine‐coordinated heme protein (HTHP) on bare carbon or on gold electrodes modified with positively and negatively charged self‐assembled monolayers (SAMs), respectively. HTHP binds to the positively charged surface but no direct electron transfer (DET) is found due to the long distance of the active sites from the electrode surfaces. At carboxyl‐terminated surfaces, the neutrally charged bottom of HTHP can bind to the SAM. For this “disc” orientation all six hemes are close to the electrode and their direct electron transfer should be efficient. HTHP on all negatively charged SAMs showed a quasi‐reversible redox behavior with rate constant k_s values between 0.93 and 2.86 s^?1 and apparent formal potentials ${E{{0{^{\prime }}\hfill \atop {\rm app}\hfill}}}$ between ‐131.1 and ‐249.1 mV. On the MUA/MU‐modified electrode, the maximum surface concentration corresponds to a complete monolayer of the hexameric HTHP in the disc orientation. HTHP electrostatically immobilized on negatively charged SAMs shows electrocatalysis of peroxide reduction and enzymatic oxidation of NADH.     

Impact of Polycyclic Aromatic Hydrocarbons on the Electrochemical Responses of a Ferricyanide Probe at Template‐Modified Self‐Assembled Monolayers on Gold Electrodes

The impact of polycyclic aromatic hydrocarbons (PAHs) on the electrochemical responses of a ferricyanide probe using gold electrodes coated with template‐containing self‐assembled monolayers (SAMs) was investigated using cyclic voltammetry and square‐wave voltammetry. The thiolated compounds that were used to form SAMs included 1‐hexadecanethiol, 11‐mercapto‐undecanoic acid, 11‐mercaptoundecanol, and (3‐mercaptopropyl) trimethoxysilane (MPTS). When the SAMs were formed from 1‐hexadecanethiol or 11‐mercapto‐undecanoic acid in the absence of pyrene, the SAM‐modified electrodes prohibited access of the ferricyanide probe and no impact of pyrene was observed. SAM‐modified electrodes (all except for MPTS) that were formed in the presence of pyrene then washed free of pyrene showed an increase in accessibility of the probe ferricyanide upon the addition of pyrene to the electrolyte solution. When electrodes were modified with MPTS to form stabilized SAMs in the presence of pyrene, however, a reduced redox current for the ferricyanide probe was observed with increased pyrene or naphthalene in the electrolyte solution. A degree of selectivity was noted in that this current response was not observed for addition of benzo[a]pyrene.     

Interference from Trace Copper in Electrochemical Investigations Employing Carboxylic Acid Terminated Thiol Modified Gold Electrodes

Unexpectedly, electrochemistry at variable chain length carboxylic acid terminated alkylthiol self‐assembled monolayers (SAMs) on gold electrodes gives rise to a Faradaic process in buffered aqueous electrolyte solution. In particular, the three‐carbon chain length, 3‐mercaptopropionic acid (MPA), exhibits a chemically reversible process with a mid‐point potential of 175 mV vs. Ag/AgCl under conditions of cyclic voltammetry. This process is associated with the presence of trace (parts per billion) amounts of copper(II) ions present in the chemical reagents used to prepare the aqueous electrolyte and also from the gold electrode itself. The carboxylic acid moiety on the SAM concentrates Cu²⁺ ions by coordination and this surface confined layer is then reduced. Methods to minimize the interference of Cu²⁺ ions at carboxylic acid terminated SAM are discussed and caution with respect to the interpretation of protein electrochemistry is recommended when using carboxylic acid functionalized SAMs to provide biocompatible electrochemical transduction surfaces, unless a metal free environment can be obtained.     

细胞色素c在硒代胱氨酸修饰电极上的直接电化学

采用电化学和接触角实验方法研究了硒代胱氨酸自组装膜修饰金电极(SeCys SAMs/Au)和十六烷基三甲基溴化铵(CTAB)-硒代胱氨酸自组装复合膜修饰金电极(CTAB-SeCys SAMs/Au)的特性. 探讨了细胞色素c(Cyt c)在SeCys SAMs/Au电极和CTAB-SeCys SAMs/Au电极上的电化学行为. 实验证明SeCys可促进Cyt c在电极上的氧化还原反应, 加入CTAB后其与SeCys之间的协同作用可在Cyt c与电极之间形成一个开放的通道, 促进作用更加明显, 且在一定浓度范围内, 随CTAB浓度(1×10^-5-1×10^-4 mol·L^-1)的增大, Cyt c在CTAB-SeCys SAMs/Au电极上的氧化还原电流增大, 在接近临界胶束浓度处出现极大值. 在CTAB-SeCys SAMs/Au电极上Cyt c产生一对氧化还原峰, 其峰电位分别为0.305和0.235 V, 其电化学过程受扩散控制. 光谱实验证实SeCys对Cyt c电化学过程的促进作用是由于SeCys与Cyt c中赖氨酸残基的结合.     

A Simple Fabrication Method for Three‐Dimensional Gold Nanoparticle Electrodes and Their Application to the Study of the Direct Electrochemistry of Cytochrome c

A simple method for constructing gold nanoparticle‐modified electrodes with three‐dimensional nanostructures is demonstrated. The electrodes were prepared by casting citrate‐reduced AuNPs onto polycrystalline gold electrodes. The resultant electrodes had a large surface area‐to‐volume ratio, adequate for high protein loading and conferring high stability. The gold nanoparticle electrodes were covered with a self‐assembled monolayer of 11‐mercaptoundecanoic acid for electrostatic immobilization of cytochrome c (cyt c). At the electrode, direct, reversible electron transfer from cyt c was observed with remarkable stability. Moreover, an extremely high surface coverage of electrochemically active cyt c, 167 fully packed monolayers, was obtained through use of the electrode.     

Intermolecular Interactions in Mixed Self‐Assembled Monolayers of Ferrocene

Electrochemical characterization of mixed self‐assembled monolayers (SAMs) of 6‐ferrocenyl‐1‐hexanethiol (FcH) and mercaptoundecanoic acid tyrosinamide (MUATyr) on gold is reported. Single‐component SAMs of FcH presented repulsive intermolecular interactions (vGθ_T=?1.12), while mixed SAMs of FcH/MUATyr (1 : 1) exhibited attractive interactions (vGθ_T=+0.20), with a homogeneous distribution of both components. Electrochemical kinetic determinations on mixed SAMs of FcH/MUATyr, indicated a secondary electron transfer pathway between the redox centers of both components. Higher amounts of FcH in the mixed SAMs lowered the observed rate of electron transfer of MUATyr. The oxidation of FcH caused an anodic shift of 160 mV in the voltammetric wave of MUATyr.     

Detection of Tellurium in Presence of Extra Arsenic on Gold Electrodes Modified By Benzenedithiol Self‐Assembled Monolayers

Electrochemical detection of tellurium is interfered with arsenic due to their similar redox potentials. Gold electrodes modified by benzenedithiols (BDT) self‐assembled monolayers (SAMs) were explored to determine Te(IV) in the presence of extra As(III) in this work. SAMs of benzenedithiols on the gold surface allows for selective extraction of Te (IV) over As(III), while blocking the redox of As(III). It provides potential applications to tellurium toxicity analysis, biological membrane study and identification of geochemistry samples.     

Synthesis and Surface‐Spectroscopic Characterization of Photoisomerizable glyco‐SAMs on Au(111)

Photoisomerizable glyco‐SAMs (self‐assembled monolayers), utilizing synthetic azobenzene glycoside derivatives were fabricated. The ultimate goal of this project is to assay the influence of the 3D arrangement of sugar ligands on cell adhesion, and eventually make cell adhesion photoswitchable. However, it is a prerequisite for any biological study on the spatial conditions of carbohydrate recognition, that photoisomerization of the surface molecules can be verified. Here, we employed IRRAS and XPS to spectroscopically characterize glyco‐SAMs. In particular and unprecedented to date, we prove reversible E→Z→E isomerization of azobenzene glycoside‐terminated SAMs.     

Reversible Control over Molecular Recognition in Surface‐Bound Photoswitchable Hydrogen‐Bonding Receptors: Towards Read–Write–Erase Molecular Printboards

The synthesis of an anthracene‐bearing photoactive barbituric acid receptor and its subsequent grafting onto azide‐terminated alkanethiol/Au self‐assembled monolayers by using an Cu^I‐catalyzed azide–alkyne reaction is reported. Monolayer characterization using contact‐angle measurements, electrochemistry, and spectroscopic ellipsometry indicate that the monolayer conversion is fast and complete. Irradiation of the receptor leads to photodimerization of the anthracenes, which induces the open‐to‐closed gating of the receptor by blocking access to the binding site. The process is thermally reversible, and polarization‐modulated IR reflection–absorption spectroscopy indicates that photochemical closure and thermal opening of the surface‐bound receptors occur in 70 and 100 % conversion, respectively. Affinity of the open and closed surface‐bound receptor was characterized by using force spectroscopy with a barbituric‐acid‐modified atomic force microscope tip.     

Nanoscale Biomolecular Structures on Self‐Assembled Monolayers Generated from Modular Pegylated Disulfides

A solid‐phase synthetic strategy was developed that uses modular building blocks to prepare symmetric oligo(ethylene glycol)‐terminated disulfides with a variety of lengths and terminal functionalities. The modular disulfides, composed of alkyl amino groups linked by an amide group to oligoethylene chains were used to generate self‐assembled monolayers (SAMs), which were characterised to determine their applicability for biomolecular applications. X‐ray photoelectron spectroscopy (XPS) of the SAMs obtained from these molecules demonstrated improved stability towards displacement by 16‐hexadecanethiol, while surface plasmon resonance (SPR) analyses of SAMs prepared with the hydroxy‐terminated oligoethylene disulfide showed equal resistance to non‐specific protein adsorption in comparison to 11‐mercaptoundecyl tri(ethylene glycol). SAMs made from these adsorbates were amenable to nanoscale patterning by scanning near‐field photolithography (SNP), facilitating the fabrication of nanopatterned, protein‐functionalised surfaces. Such SAMs may be further developed for bionanotechnology applications such as the fabrication of nanoscale biological arrays and sensor devices.     

Voltammetric Study of Methylene Blue at Thiol SAMs‐Modified Gold Electrodes

The voltammetric behavior of methylene blue (MB) at thiol self‐assembled monolayers modified gold electrodes (SAMs/Au) has been investigated. MB exhibited a redox peak at about ?0.35 V (vs.SCE) in alkaline solution at bare gold electrodes. When the gold electrodes were modified with thiol SAMs, the peak grew due to the accumulation of MB at SAMs. With the solution pH rising, more MB was accumulated, hence the peak height increased, which differed from that at bare gold electrodes. The electrode process at SAMs/Au featured the characteristics of adsorption and/or electrode reaction controlled. The enhancing action of glutathione monolayer (GSH SAM), 3‐mercaptopropionic acid monolayer (3MPA SAM) and other thiol SAMs was compared. Among these, GSH SAM made the MB peak increase more. At GSH SAM/Au, the peak height varied linearly with MB concentration over the range of 2 μM to 400 μM. So this can be developed for the determination of MB and studies concerned. The accumulation behavior caused by GSH SAM and native fish sperm dsDNA was compared. The interaction between DNA and MB was also discussed under this condition.     

Electron Transfer Behavior through Densely Packed Self‐Assembled Monolayers of a Novel Heteroaromatic Thiol Derivative onto the Gold Surface

This article is describing the electrical characteristics of the self‐assembled monolayers (SAMs) formed during spontaneous chemical adsorption of a recently synthesized heteroaromatic thiol 2‐(2‐mercaptophenylnitrilomethylidyne)‐phenol ( L ). Some surfactants were used to regulate the electron transfer through the resulting SAMs, as investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results revealed that the surface structure is approximately complete and fractional coverage is very close to unity. The use of surfactants clearly improved the electron transfer properties. Furthermore, complementary experiments were carried out to investigate the electron transfer from modified surface to cytochrome C (cyt‐C), as a biological iron containing protein, which exists in living cells with important life roles. It was found that cyt‐C is able to interact with the modified surface so that it can be used as a scaffold to study the electrochemical characteristics of sensitive biological compounds like proteins. The voltammetric behavior of the redox protein on the resulting SAMs was found to be highly reproducible, emphasizing the fact that the protein denaturation is greatly suppressed.     

Electrochemically partitioned assembly of organosulfur monolayers and nanoparticles

Partitionally assembled organosulfur monolayers were prepared by using an electrochemically assisted assembly method on gold films that were preseparated into two regions insulated from each other. Cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS) were employed to characterize the n-dodecanethiol (DDT) and the 11-mercaptoundecanoic acid (MUA) monolayers, which were separately assembled on different substrate regions. CV results indicated that both the DDT- and MUA-coated gold electrodes showed a blocking property toward the negatively charged redox probe Fe(CN)6(3-). However, when positively charged Ru(NH3)6(3+) was used as the redox probe, the MUA- and DDT-modified electrodes showed quasireversible and blocking CV features, respectively. These phenomena were attributed to different interactions between the negatively charged MUA surface and the negatively or positively charged redox probes. XPS spectra obtained on the MUA modified region exhibited an O(1s) peak and a small discrete C(1s) peak, which arose from the oxygen and the carbon atoms in the carboxylic acid groups, respectively. For the DDT-modified region, these two peaks were absent. CV and XPS experimental results provided strong evidence that different SAMs were selectively deposited onto different regions of the preexisting patterns of the substrate by electrochemically partitioned assembly. The partitionally assembled sulfur-based monolayers with different terminal groups were used to form location-selective nanoparticle assemblies. This electrochemically partitioned assembly technique has great potential in controllable constructions of molecular layers and nanostructures on different surface microarchitectures that are closely integrated on one substrate but insulated from each other.     

Electron transfer in SAM/cytochrome/polyelectrolyte hybrid systems on electrodes: a time-resolved surface-enhanced resonance Raman study

Silver electrodes were covered with mixed self-assembled monolayers (SAMs) of 11-mercaptoundecanoic acid (MUA) and 11-mercaptoundecanol (MU) and subsequently coated with alternating layers of cytochrome c (Cyt) and poly(anilinesulfonic acid) (PASA). The immobilized protein is electroactive and retains its native structure. Compared to the case of systems on gold electrodes, the stability of the assembly was found to be decreased. The redox process of Cyt is accompanied by reversible oxidation-reduction of PASA as revealed by the comparative surface-enhanced resonance Raman (SERR) analysis of assemblies including Cyt and the redox-inactive apo-cytochrome c. Time-resolved SERR experiments show a fast electron exchange between the protein and the polyelectrolyte that may play a supporting role in the electric communication of thicker multilayer assemblies employed as sensors.