Development of Poor Cell Adhesive Immersion Precipitation Membranes Based on Supramolecular Bis‐Urea Polymers

A variety of biomedical applications requires tailored membranes; fabrication through a mix‐and‐match approach is simple and desired. Polymers based on supramolecular bis‐urea (BU) moieties are capable of modular integration through directed non‐covalent stacking. Here, it is proposed that non‐cell adhesive properties can be introduced in polycaprolactone‐BU‐based membranes by the addition of poly(ethylene glycol) (PEG)‐BU during immersion precipitation membrane fabrication, while unmodified PEG is not retained in the membrane. PEG‐BU addition results in denser membranes with a similar pore size compared to pristine membranes, while PEG addition induces defect formation. Infrared spectroscopy and surface hydrophobicity measurements indicate that PEG‐BU is retained during membrane processing. Additionally, PEG‐BU incorporation successfully leads to poor cell adhesive surfaces. No evidence is observed to indicate PEG retention. The results obtained indicate that the BU system enables intimate mixing of BU‐modified polymers after processing. Collectively, the results provide the first steps toward BU‐based immersion precipitated supramolecular membranes for biomedical applications.     

Synthesis of superparamagnetic and thermoresponsive hybrid nanoparticles via surface‐mediated RAFT polymerization of di(ethylene glycol) ethyl ether acrylate and (oligoethylene glycol) methyl ether acrylate

A reversible addition‐fragmentation chain transfer (RAFT) agent was directly anchored onto superparamagnetic Fe₃O₄ nanoparticles (SPNPs) in a simple procedure using a ligand exchange reaction of 2‐[(dodecylsulfanylcarbonylthiolsulfanyl) propionic acid] (DCPA) with oleic acid initially present on the surface of Fe₃O₄ nanoparticles. The DCPA‐modified SPNPs were then used for the surface‐mediated RAFT polymerization of di(ethylene glycol) ethyl ether acrylate and (oligoethylene glycol) methyl ether acrylate to fabricate structurally well‐defined hybrid SPNPs with temperature‐responsive poly[di(ethylene glycol) ethyl ether acrylate‐co‐(oligoethylene glycol) methyl ether acrylate] shell and magnetic Fe₃O₄ core. Evidence of a well‐controlled surface‐mediated RAFT polymerization was gained from a linear increase of number‐average molecular weight with overall monomer conversions and relatively narrow polydispersity indices of the copolymers grown from the SPNPs. The resultant hybrid nanoparticles exhibited superparamagnetic property with a saturation magnetization of 55.1–19.4 emu/g and showed a temperature‐responsive phenomenon as the temperature changed between 25 and 40 ^°C. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3420–3428     

Globotriose- and oligo(ethylene glycol)-terminated self-assembled monolayers: surface forces, wetting, and surfactant adsorption

A set of oligo(ethylene glycol)-terminated and globotriose-terminated self-assembled monolayers (SAMs) has been prepared on gold substrates. Such model surfaces are well defined and have good stability due to the strong binding of thiols and disulfides to the gold substrate. They are thus very suitable for addressing questions related to effects of surface composition on wetting properties, surface interactions, and surfactant adsorption. These issues are addressed in this report. Accurate wetting tension measurements have been performed as a function of temperature using the Wilhelmy plate technique. The results show that the nonpolar character of oligo(ethylene glycol)-terminated SAMs increases slightly but significantly with temperature in the range 20-55 degrees C. On the other hand, globotriose-terminated SAMs are fully wetted by water at room temperature. Surface forces measurements have been performed and demonstrated that the interactions between oligo(ethylene glycol)-terminated SAMs are purely repulsive and similar to those determined between adsorbed surfactant layers with the same terminal headgroup. On the other hand, the interactions between globotriose-terminated SAMs include a short-range attractive force component that is strongly affected by the packing density in the layer. In some cases it is found that the attractive force component increases with contact time. Both these observations are rationalized by an orientation- and conformation-dependent interaction between globotriose headgroups, and it is suggested that hydrogen-bond formation, directly or via bridging water molecules, is the molecular origin of these effects.     

Water‐soluble,thermoresponsive, hyperbranched copolymers based on PEG‐methacrylates: Synthesis,characterization, and LCST behavior

A series of water‐soluble thermoresponsive hyperbranched copoly(oligoethylene glycol)s were synthesized by copolymerization of di(ethylene glycol) methacrylate (DEG‐MA) and oligo(ethylene glycol) methacrylate (OEG‐MA, M_w = 475 g/mol), with ethylene glycol dimethacrylate (EGD‐MA) used as the crosslinker, via reversible addition fragmentation chain transfer polymerization. Polymers were characterized by size exclusion chromatography and nuclear magnetic resonance analyses. According to the monomer composition, that is, the ratio of OEG‐MA: DEG‐MA: EGD‐MA, the lower critical solution temperature (LCST) could be tuned from 25 °C to 90 °C. The thermoresponsive properties of these hyperbranched copolymers were studied carefully and compared with their linear analogs. It was found that molecular architecture influences thermoresponsive behavior, with a decrease of around 5–10 °C in the LCST of the hyperbranched polymers compared with the LCST of linear chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2783–2792, 2010     

Asymmetrically Functionalized,Four‐Armed,Poly(ethylene glycol) Compounds for Construction of Chemically Functionalizable Non‐Biofouling Surfaces

Asymmetrically functionalized, four‐armed, Tween 20 derivatives that formed stable monomolecular films on solid substrates were designed and synthesized. Thiol‐modified Tween 20 was used for forming self‐assembled monolayers (SAMs) on gold, and maleimide‐modified Tween 20 was introduced onto SiO₂ surfaces with SAMs of (3‐mercaptopropyl)trimethoxysilane through Michael addition. These structurally modified Tween 20 compounds gave the original characteristics of Tween 20, non‐biofouling (from ethylene glycol groups) and functionalizable (from OH groups) properties, to each substrate. The non‐biofouling properties of the Tween 20‐coated gold and SiO₂ surfaces were investigated by surface plasmon resonance spectroscopy and ellipsometry, and these surfaces showed strong resistance against nonspecific adsorption of proteins. In addition, the biospecific binding of streptavidin was achieved after coupling of (+)‐biotinyl‐3,6,9‐trioxaundecanediamine onto the non‐biofouling surfaces through amide‐bond formation.     

Direct Electrochemistry of Cytochrome c at Modified Si(100) Electrodes

This paper demonstrates the direct electron transfer between the heme moiety of horse hearth cytochrome c and a pyridinyl group on self‐assembled‐monolayer‐modified Si(100) electrodes. Self‐assembled monolayers (SAMs) containing the putative receptor ligand were prepared by a step‐wise procedure using “click” reactions of acetylene‐terminated alkyl monolayers and isonicotinic acid azide derivatives. Unoxidized Si(100) electrodes, possessing either isonicotinate or isonicotinamide receptor ligands, were characterized using X‐ray photoelectron spectroscopy, contact‐angle goniometry, cyclic voltammetry, and electrochemical impedance spectroscopy. The ability of isonicotinic acid terminated layers to coordinatively bind the redox center of cytochrome c was found to be restricted to pyridinyl assemblies with a para‐ester linkage present. The protocol detailed here offers an experimentally simple modular approach to producing chemically well‐defined SAMs on silicon surfaces for direct electrochemistry of a well‐studied model redox protein.     

Hydration of oligo(ethylene glycol) self-assembled monolayers studied using polarization modulation infrared spectroscopy

The interaction with water of protein-resistant monolayers (SAMs), self-assembled from (triethylene glycol) terminated thiol HS(CH2)11(OCH2CH2)3OMe solutions, was studied using in and ex situ polarization-modulated Fourier transform infrared spectroscopy. In particular, shifts in the position of the characteristic C-O-C stretching vibration were observed after the monolayers had been exposed to water. The shift in frequency increased when the SAM was observed in direct contact with a thin layer of water. It was found that the magnitude of the shift also depended on the surface coverage of the SAM. These findings suggest a rather strong interaction of oligo(ethylene glycol) SAMs with water and indicate the penetration of water into the upper region of the monolayer.     

Rapid metal‐free macromolecular coupling via In Situ nitrile oxide‐activated alkene cycloaddition

Nitrile oxide 1,3 dipolar cycloaddition is a simple and powerful coupling methodology. However, the self‐dimerization of nitrile oxides has prevented the widespread use of this strategy for macromolecular coupling. By combining an in situ nitrile oxide generation with a highly reactive activated dipolarophile, we have overcome these obstacles and present a metal‐free macromolecular coupling strategy for the modular synthesis of several ABA triblock copolymers. Nitrile oxides were generated in situ from chloroxime terminated poly(dimethylsiloxane) B‐blocks and coupled with several distinct hydrophilic (poly(2‐methyloxazoline) and poly(ethylene glycol)), and poly(N‐isopropylacrylamide) or hydrophobic (poly(l ‐lactide) A‐blocks terminated in activated dipolarophiles in a rapid fashion with high yield. This methodology overcomes many drawbacks of previously reported metal‐free methods due to its rapid kinetics, versatility, scalability, and ease of introduction of necessary functionality. Nitrile oxide cycloaddition should find use as an attractive macromolecular coupling strategy for the synthesis of biocompatible polymeric nanostructures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3134–3141     

Preparation of high quality electrical insulator self-assembled monolayers on gold. Experimental investigation of the conduction mechanism through organic thin films

Self-assembled monolayers (SAMs) form highly ordered, stable dielectrics on conductive surfaces. Being able to attach larger-area contacts in a MIM (metal-insulator-metal) diode, their electrical properties can be determined. In this paper, the electrical conduction through thiolate SAMs of different alkyl chain lengths formed on gold surfaces were studied and discussed. The influence of the headgroup with respect to the surface quality and prevention of short circuits is investigated. Phenoxy terminated alkanethiols were found to form high quality SAMs with perfect insulating properties. Synthesis of the required terminally substituted long chain thiols have been developed. The I(V) characteristics of MIM structures formed with these SAMs are measured and simulated according to theoretical tunneling models for electrical conductivity through thin organic layers. SAM based electronic devices will become especially important for future nanoscale applications, where they can serve as insulators, gate dielectric of FETs, resistors, and capacitor structures.     

Attachment of Amine‐ and Maleimide‐Containing Ferrocene Derivatives onto Self‐Assembled Alkanethiol and Alkanedithiol Monolayers: Voltammetric Evaluation of Cross‐Linking Efficiencies and Surface Coverage of Electroactive Groups

Ferrocene derivatives containing primary amines and maleimide groups were attached covalently onto N‐hydrosuccinimidyl (NHS)‐terminated alkanethiol self‐assembled monolayers (SAMs) and SAMs of alkanedithiol. The surface coverage and efficiencies of the two cross‐linking reactions were evaluated with cyclic voltammetry. All the ferrocene derivatives attached onto the alkanethiol or alkanedithiol SAMs exhibit reversible redox waves. The surface coverage of the aminated ferrocene groups was compared to that of N‐hydrosuccinimidyl (NHS)‐terminated alkanethiol SAM. The covalent attachment of β‐ferrocenylethylamine onto a 11,11′‐dithio‐bis(succinimidylundecanoate) SAM yielded an efficiency as high as 63.1%. The cross‐linking efficiency of this reaction was found to increase with the nucleophilicity of the amino groups. SAMs of longer alkyl chains favor the attachment of a greater number of ferrocene derivatives. As for the Michael‐type electrophilic addition between the sulfhydryl groups of the alkanedithiol SAMs and the ferrocenyl maleimide, the cross‐linking efficiencies were found to range from 6.5% to 25.7%, depending on the alkanedithiol chain length. The difference in the efficiencies between the two types of cross‐linking reactions might be partially attributable to the steric hindrance imposed by the SAMs and the relative sizes of the functional groups.     

Molecularly Imprinted Polymers: Compromise between Flexibility and Rigidity for Improving Capture of Template Analogues

New synthetic strategies for molecularly imprinted polymers (MIPs) were developed to mimic the flexibility and mobility exhibited by receptor/enzyme binding pockets. The MIPs were prepared by bulk polymerization with quercetin as template molecule, acrylamide as functional monomer, ethylene glycol dimethacrylate as cross‐linker, and THF as porogen. The innovative grafting of specific oligoethylene glycol units onto the imprinted cavities allowed MIPs to be obtained that exhibit extended selectivity towards template analogues. This synthetic strategy gives promising perspectives for the design of molecular recognition of molecules based on a congruent pharmacophore, which should be of interest for drug development.     

Expedient generation of patterned surface aldehydes by microfluidic oxidation for chemoselective immobilization of ligands and cells

An expedient and inexpensive method to generate patterned aldehydes on self-assembled monolayers (SAMs) of alkanethiolates on gold with control of density for subsequent chemoselective immobilization from commercially available starting materials has been developed. Utilizing microfluidic cassettes, primary alcohol oxidation of tetra(ethylene glycol) undecane thiol and 11-mercapto-1-undecanol SAMs was performed directly on the surface generating patterned aldehyde groups with pyridinium chlorochromate. The precise density of surface aldehydes generated can be controlled and characterized by electrochemistry. For biological applications, fibroblast cells were seeded on patterned surfaces presenting biospecifc cell adhesive (Arg-Glyc-Asp) RGD peptides.     

AFM analysis of organic silane thin films for bioMEMS applications

Designing surfaces that elicit the desirable response is essential for bioMEMS (biological microelectromechanical systems) applications. To this end, we have developed two different types of silane film—hydrophobic and hydrophilic—using vinyltrichlorosilane and poly(ethylene glycol) silane, respectively. As the surface topography plays a very important role in governing protein or cell interactions, these films were characterized extensively using atomic force microscopy. All the films developed were found to have a very low root‐mean‐square roughness value (<1.3 nm). Furthermore, the topography of protein‐adsorbed silane‐modified surfaces was investigated because cell adhesion is mediated primarily by proteins. Three‐dimensional and section plots were able to differentiate the way in which protein interacts with hydrophobic and hydrophilic surfaces. Copyright © 2003 John Wiley & Sons, Ltd.     

One‐Step Synthesis of Singly Bridged Biscalix[4]arenes with Oligooxyethyleneethyl Spacers

Here we describe the one‐step synthesis of a series of singly bridged biscalix[4]arene derivatives connected by ethylene or oligooxyethyleneethyl chain through the reaction of calix[4]arene with corresponding ethylene or oligoethylene glycol ditosylates in the presence of sodium hydride in toluene. A 1,2‐bis(ethylene) doubly bridged bis‐p‐tert‐butylcalix[4]arene was also obtained as a by‐product.     

Ferrocenyl amphiphilic Janus dendrimers as redox‐responsive micellar carriers

Amphiphilic Janus dendrimers have attracted increasing attention due to their asymmetric structures and various functional properties compared to the conventional symmetric macromolecules. Herein, a novel ferrocenyl‐terminated amphiphilic Janus dendrimer containing nine hydrophilic triethylene glycol branches was synthesized by two synthetic routes, namely the typical chemo selective coupling method and the mixed modular approach. Chemical redox triggers, namely Fe₂(SO₄)₃ as oxidant and ascorbic acid as reductant, could regulate the self‐assembly behavior of the Janus dendrimer in water through the redox‐switching between ferrocene and ferricinium cations, and the change of micelles formed were investigated and confirmed through scanning electron microscopy and dynamic light scattering. The cargo‐loading property of the micelles self‐assembled by the Janus dendrimer was further proved by the successful fabrication of Rhodamine B (RhB)‐loaded micelles, and the oxidation‐triggered release behavior of the encapsulated RhB could be mediated by changing the concentration of oxidants. This work provides an effective approach to prepare ferrocenyl‐terminated amphiphilic Janus dendrimers and the self‐assembled micelles might be used as a promising molecular carrier in areas such as drug delivery and catalysis.     

Ion recognition at the interface of self-assembled monolayers (SAMs) of bis-thioctic ester derivatives of oligo(ethyleneglycols)

Self-assembled monolayers (SAMs) of bis-thioctic ester derivatives of oligoethylene glycols were prepared. When the number of (-CH2-CH2-O-)n units in these podands was either five or six, the corresponding SAMs showed ion binding properties and selectivities similar to those exhibited by 15-crown-5 or 18-crown-6 in aqueous solution, respectively. Impedance data for the SAMs as a function of metal ion concentrations were fitted by using a Langmuir isotherm to determine the association constants (Ka) with the different ions. The SAM derived from the n = 5 compound is selective for Na+ while that with n = 6 is selective for K+. Results presented here confirm the formation of ion recognition domains during self-assembly of acyclic polyethylene glycol derivatives on gold surfaces; this suggests that surface-confined pseudocrown ether structures are formed.     

Direct UV‐Induced Functionalization of Surface Hydroxy Groups by Thiol–Ol Chemistry

A novel UV‐initiated surface modification method for the direct functionalization of surface hydroxy groups with thiol‐containing molecules (termed “thiol–ol” modification) is described. This method is based on the oxidative conjugation of thiols to hydroxy groups. We demonstrate that different thiol‐containing molecules, such as fluorophores, thiol‐terminated poly(ethylene glycol) (PEG‐SH), and a cysteine‐containing peptide, can be attached onto the surface of porous poly(2‐hydroxyethyl methacrylate‐co‐ethylene dimethacrylate). Direct functionalization of other hydroxy‐group‐bearing surfaces, fabrication of micropatterns, and double patterning have been also demonstrated using the thiol–ol method.     

Synthesis of phenanthroline‐terminated polymers and their Fe(II)‐complexes

Well‐defined mono‐ and bifunctional, phenanthroline‐terminated poly(ethylene glycol) and polyisobutylene capable of polymer network formation were synthesized. The starting materials mono‐ and bi‐phenanthroline‐ (phen) terminated poly(ethylene glycols) (mPEG‐phen, phen‐PEG‐phen) and polyisobutylenes (PIB‐phen, phen‐PIB‐phen) were prepared by the Williamson synthesis and characterized by means of ¹H NMR and MALDI‐TOF mass spectrometry. According to UV–Vis spectrophotometry and ESI‐TOF mass spectrometry, the phenanthroline‐terminated polymers underwent quantitative complex formation with ferrous ions in solution. The aqueous solution of mPEG‐phen shows self‐assembly behavior. Important parameters, such as critical micelle concentration and hydrodynamic radius of the aggregates were also determined. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2709–2715, 2010     

Mixed self-assembled monolayers (SAMs) consisting of methoxy-tri(ethylene glycol)-terminated and alkyl-terminated dimethylchlorosilanes control the non-specific adsorption of proteins at oxidic surfaces

Monolayers from the newly synthesized compound methoxy-tri(ethylene glycol)-undecenyldimethylchlorosilane (CH3O(CH2CH2O)3(CH2)11Si(CH3)2Cl, MeO(EG)3C11DMS) and dodecyldimethylchlorosilane (DDMS), both pure and mixed, were prepared by self-assembly from organic solution in the presence of an organic base. The films obtained were characterized by advancing and receding contact angle measurements and ellipsometry to confirm the formation of self-assembled monolayers (SAMs). The resulting data on the covalently attached dimethylsilanes were compared to known oligo(ethylene glycol) (OEG)-terminated SAM systems based on terminal alkenes, thiolates or trihydrolyzable silanes. The composition of the mixed SAMs was found to depend directly and linearly on the composition of the silanization solution. Enhanced protein repellent properties were found for the SAMs using a variety of proteins, including the Ras Binding Domain (RBD), a protein with high relevance for cancer diagnostics. Roughly a RBD protein monolayer amount was adsorbed to silicon oxide surfaces silanized with DDMS or non-silanized silicon wafers, and in contrast, no RBD was adsorbed to surfaces silanized with MeO(EG)3C11DMS or to mixed monolayers consisting of DDMS and MeO(EG)3C11DMS if the content of OEG-silane overcame a critical content of X(EG) approximately 0.9.     

Fluorinated bio‐acceptable polymers via an ATRP macroinitiator approach

Polymers derived from bio‐acceptable poly(methyl methacrylate) (PMMA), poly(2‐methoxyethyl acrylate) (PMEA), and poly(oligo(ethylene glycol) methyl ether methacrylate) (PPEGMA) have been prepared via atom transfer radical polymerization (ATRP) utilizing an initiator prepared from a fluoroalkoxy‐terminated oligoethylene glycol. Polymerizations are controlled as seen by both linear first‐order kinetics and molecular weight evolution coupled with low polydispersities (<1.25) with respect to conversion. A range of ligands have been used depending upon the nature of the monomer: N‐(n‐propyl)‐2‐pyridyl‐methanimine with the methacrylates MMA and PEGMA and 1,1,4,7,10,10‐hexamethyltriethylene tetramine (HMTETA) with MEA. In all cases the use of the fluorinated initiator results in a lower apparent rate of propagation (k_p^app) as compared with the more conventional and nonfluorinated initiator, ethyl 2‐bromoisobutyrate. The initiator generally also serves as an internal plasticizer lowering the glass transition temperature from the parent polymers. The surface characteristics of the fluoroinitiator containing polymers are altered compared with the nonfluorinated analogues. This is reflected in a significant increase in the advancing water contact angles of all fluoro‐containing polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5770–5780, 2007