Tunable Properties of Inclusion Complexes Between Amylose and Polytetrahydrofuran

Amylose and polytetrahydrofuran (PTHF) are mixed in an aqueous solution to form inclusion complexes. DSC shows that immediate mixing results in complexes having lower melting temperatures compared with complexes prepared with longer mixing times. The washed complexes melt at higher temperatures compared with the corresponding unwashed complexes. XRD indicates that amylose–PTHF complexes diffract similar to amylose–fatty acids complexes (V_6I‐amylose helices), with additional diffractions correlating with amylose–alcohol complexes (V_6II‐amylose helices). This suggests that the structure of amylose–PTHF complexes is an intermediate or a mixture between V_6I‐ and V_6II‐amylose. This shows that, besides residing inside the amylose helices, some PTHF chains are located in between the amylose helices.

     

直链淀粉包结络合作用

直链淀粉在溶液中可形成单螺旋链,并作为一种主体分子通过疏水相互作用与各种疏水性客体分子发生包结络合作用。本文对直链淀粉包结络合作用的研究进展进行了综述,详细介绍了直链淀粉包结络合物的种类及制备方法,还介绍了直链淀粉包结络合作用在面粉食品和新材料制备中的应用。     

Preparation of Amylose-Oligo[(R)-3-hydroxybutyrate] Inclusion Complex by Vine-Twining Polymerization

In this study, we attempted to prepare an amylose-oligo[(R)-3-hydroxybutyrate] (ORHB) inclusion complex using a vine-twining polymerization approach. Our previous studies indicated that glucan phosphorylase (GP)-catalyzed enzymatic polymerization in the presence of appropriate hydrophobic guest polymers produces the corresponding amylose–polymer inclusion complexes, a process named vine-twining polymerization. When vine-twining polymerization was conducted in the presence of ORHB under general enzymatic polymerization conditions (45 °C), the enzymatically produced amylose did not undergo complexation with ORHB. However, using a maltotriose primer in the same polymerization system at 70 °C for 48 h to obtain water-soluble amylose, called single amylose, followed by cooling the system over 7 h to 45 °C, successfully induced the formation of the inclusion complex. Furthermore, enzymatic polymerization initiated from a longer primer under the same conditions induced the partial formation of the inclusion complex. The structures of the different products were analyzed by X-ray diffraction, ¹H-NMR, and IR measurements. The mechanism of formation of the inclusion complexes discussed in the study is proposed based on the additional experimental results.     

Inclusion Compound Formation of Amylose by Sealed-Heating with Salicylic Acid Analogues

The inclusion compounds of linear amylose and salicylic acid analogues preparedby sealed-heating were evaluated by using powder X-ray diffraction and infraredspectroscopy. Sealed-heating of amylose and either salicylamide or benzoic acidinduced the amylose structural change from the 6₁- to the 7₁-helix structure, while sealed-heating with o-toluic acid, o-chlorobenzoic acid and o-nitrobenzoic acid induced the change from the 6₁- to the 8₁-helix structure. In contrast to theresults in the salicylic acid system, the amylose helix type of sealed-heated samplewas not varied by the load of the guest compound, but was fixed only by the guestspecies. No change of the helical structure of amylose depending on the amylose molecular weight was observed. From the comparison of inclusion compound formation among different guest systems, it was found that the higher vapor pressure at 100 °C of the guest resulted in faster inclusion compound formation. The vapor pressure of the guest compound would be an important factor affecting the progress of inclusion compound formation.     

Dynamic Gas‐Inclusion in a Single Crystal

In solid‐state science, most changing phenomena have been mysterious. Furthermore, the changes in chemical composition should be added to mere physical changes to also cover the chemical changes. Here, the first success in characterizing the nature of gas inclusion in a single crystal is reported. The gas inclusion process has been thoroughly investigated by in situ optical microscopy, single‐crystal X‐ray diffraction analyses, and gas adsorption measurements. The results demonstrated an inclusion action of a first‐order transition behavior induced by a critical concentration on the phase boundary. The transfer of phase boundary and included gas are strongly related. This relationship can generate the dynamic features hidden in the inclusion phenomena, which can lead to the guest capturing and transfer mechanism that can apply to spatiotemporal inclusion applications by using host solids.     

The Change of the Structure of Amylose During the Inclusion of 2-Naphthol in Sealed-heating Process

When a mixture of linear amylose (AS200) and2-naphthol was heated in a glass ampoule above60 ^circC, an inclusion compound was formed. Theinclusion formation accompanied the structural changeof AS200 from a 6₁-helix to a 7₁-helix. Fromthe UV determination, one 2-naphthol molecule could beincluded per one 7₁-helical turn of amylose. It was found that the heating temperature, heating timeand water content in the physical mixture wereimportant parameters affecting the formation ofinclusion compounds during sealed-heating.     

Enzyme‐Catalyzed Ring‐Opening Polymerization of Unsubstituted β‐Lactam

The synthesis of poly(β‐alanine) by Candida antarctica lipase B immobilized as novozyme 435 catalyzed ring‐opening of 2‐azetidinone is reported. After removal of cyclic side products and low molecular weight species pure linear poly(β‐alanine) is obtained. The formation of the polymer is confirmed with ¹H NMR spectroscopy and MALDI‐TOF mass spectrometry. The average degree of polymerization of the obtained polymer is limited to = 8 by its solubility in the reaction medium. Control experiments with β‐alanine as a substrate confirmed that the ring structure of the 2‐azetidinone is necessary to obtain the polymer.

     

Living Coordination Polymerization of a Six‐Five Bicyclic Lactone to Produce Completely Recyclable Polyester

The development of chemically recyclable polymers promises a closed‐loop approach towards a circular plastic economy but still faces challenges in structure/property diversity and depolymerization selectivity. Here we report the first successful coordination ring‐opening polymerization of 4,5‐trans‐cyclohexyl‐fused γ‐butyrolactone ( M1 ) with lanthanide catalysts at room temperature, producing P( M1 ) with M_n up to 89 kg mol^?1, high thermal stability, and a linear or cyclic topology. The same catalyst also catalyses selective depolymerization of P( M1 ) back to M1 exclusively at 120 °C. This coordination polymerization is also living, enabling the synthesis of well‐defined block copolymer.     

Regio‐ and Stereochemical Control in Ocimene Polymerization by Half‐Sandwich Rare‐Earth Metal Dialkyl Complexes

The polymerization of ocimene has been first achieved by half‐sandwich rare‐earth metal dialkyl complexes in combination with activator and AlⁱBu₃. The regio‐ and stereoselectivity in the ocimene polymerization can be controlled by tuning the cyclopentadienyl ligand and the central metal of the complex. The chiral cyclopentadienyl‐ligated Sc complex 1 prepares syndiotactic cis‐1,4‐polyocimene (cis‐1,4‐selectivity up to 100%, rrrr = 100%), while the corresponding Lu, Y, and Dy complexes 2 – 4 and the achiral pentamethylcyclopentadienyl Sc, Lu, and Y complexes 5 – 7 afford isotactic trans‐1,2‐polyocimenes (trans‐1,2‐selectivity up to 100%, mm = 100%).

     

Formation of Inclusion Complexes between Cyclodextrins and Carbaryl and Characterization of the Complexes

The solubility of carbaryl increased with increasing concentrations of-CD, G₂--CD, and M--CD. The result suggests theformation of soluble inclusion complex. Solubility increase was highestin M--CD-carbaryl, being 18.4 fold higher than that of carbaryl when 100 mM M--CD was used. The apparent formation constant for the complex calculated from phase solubility diagram was 223.18 M^-1. The preparation of the complex in solid form for characterization was successful by kneading andfreeze-drying. The DSC curves for kneading and freeze-drying mixture didnot show the endothermic peak characteristic of carbaryl, but a small new endothermic peak was observed. FTIR analysis showed a shift of the major peak of carbonyl group in carbaryl molecule from 1717 to 1744 and 1734 cm^-1 in kneading and freeze-dried mixtures, respectively. M--CD-carbaryl complex demonstrated higher dissolution rate, higher thermal and UV stability but lower toxicity than its parent carbaryl compound.     

Redox‐Controlled Olefin (Co)Polymerization Catalyzed by Ferrocene‐Bridged Phosphine‐Sulfonate Palladium Complexes

The facile and reversible interconversion between neutral and oxidized forms of palladium complexes containing ferrocene‐bridged phosphine sulfonate ligands was demonstrated. The activity of these palladium complexes could be controlled using redox reagents during ethylene homopolymerization, ethylene/methyl acrylate copolymerization, and norbornene oligomerization. Specifically in norbornene oligomerization, the neutral complexes were not active at all whereas the oxidized counterparts showed appreciable activity. In situ switching between the neutral and oxidized forms resulted in an interesting “off” and “on” behavior in norbornene oligomerization. This work provides a new strategy to control the olefin polymerization process.     

Recent Developments and Optimization of Lipase‐Catalyzed Lactone Formation and Ring‐Opening Polymerization

To obtain materials useful for the biomedical field, toxic catalysts should be removed from the synthetic route of polymerization reactions and of their precursors. Lipase‐catalyzed ring‐opening polymerization and the synthesis of cyclic precursors can be performed with the same catalyst under different conditions. Here, we highlight the use of lipases as catalysts and optimization of their performance for both ring‐closing and ring‐opening polymerization, via varying parameters such as ring size, concentration, substrate molar ratio, temperature, and solvent. While the conditions for ring‐closing reactions and ring‐opening polymerizations of small molecules, such as ε‐caprolactone, have been extensively explored using Candida antarctica lipase B (CALB), the optimization of macrocyclization, especially for more bulky substrates is surveyed here. Finally, recent methods and polymer architectures are summarized with an emphasis on new procedures for more sustainable chemistry, such as the use of ionic liquids as solvents and recycling of polyesters by enzymatic pathways.

     

Formation of DNA‐Copolymer Fibrils Through an Amyloid‐Like Nucleation Polymerization Mechanism

Conjugation of a hydrophobic poly(2‐oxazoline) bearing tertiary amide groups along its backbone with a short single stranded nucleotide sequence results in an amphiphilic comb/graft copolymer, which organizes in fibrils upon direct dissolution in water. Supported by circular dichroism, atomic force microscopy, transmission electron microscopy, and scattering data, fibrils are formed through inter‐ and intramolecular hydrogen bonding between hydrogen accepting amide groups along the polymer backbone and hydrogen donating nucleic acid grafts leading to the formation of hollow tubes.