Core-shell nanoparticles coated with molecularly imprinted polymers: a review

Core-shell surface molecular imprinting technology represents a rather new trend in analytical sciences. In this kind of material, the imprinting sites are located on the surface of the cores or shells of nanoparticles (NPs). This material can improve the capability of recognizing target molecules (analytes), reduce nonspecific adsorption, increase the relative adsorption capacity and selectivity, and accelerate the rate of mass transfer. This review (with 158 references) focuses on recent trends in core-shell MIPs. Following an introduction into the field, a first main section covers common core-materials including silica, magnetic NPs, quantum dots (including semiconductor quantum dots and carbon dots), gold and silver nanoclusters, and up-conversion materials. A further section covers the materials and reagents required for preparing MIPs (with subsections on templates, functional monomers, cross-linkers, initiators, and effects of solvent). A next main section covers synthetic approaches such as precipitation polymerization, emulsion polymerization, and grafting approach. A final section gives examples for applications of core-shell MIPs in analytical assays and in sensing.

Open image in new window

Graphical abstract This review (with 158 references) focuses on recent trends in core-shell nanoparticles coated with molecularly imprinted polymers (core-shell MIPs). Three significant synthesis methods are introduced: precipitation, emulsion and grafting approach. Applications of core-shell MIPs concentrate on solid phase extraction, fluorescent probe, surface-enhanced Raman scattering-based sensors and electrochemical sensors.

     

Development of andrographolide molecularly imprinted polymer for solid-phase extraction

A method employing molecularly imprinted polymer (MIP) as selective sorbent for solid-phase extraction (SPE) to pretreat samples was developed. The polymers were prepared by precipitation polymerization with andrographolide as template molecule. The structure of MIP was characterized and its static adsorption capacity was measured by the Scatchard equation. In comparison with C(18)-SPE and non-imprinted polymer (NIP) SPE column, MIP-SPE column displays high selectivity and good affinity for andrographolide and dehydroandrographolide for extract of herb Andrographis paniculata (Burm.f.) Nees (APN). MIP-SPE column capacity was 11.9±0.6 μmol/g and 12.1±0.5 μmol/g for andrographolide and dehydroandrographolide, respectively and was 2-3 times higher than that of other two columns. The precision and accuracy of the method developed were satisfactory with recoveries between 96.4% and 103.8% (RSD 3.1-4.3%, n=5) and 96.0% and 104.2% (RSD 2.9-3.7%, n=5) for andrographolide and dehydroandrographolide, respectively. Various real samples were employed to confirm the feasibility of method. This developed method demonstrates the potential of molecularly imprinted solid phase extraction for rapid, selective, and effective sample pretreatment.     

Boronate-affinity based magnetic molecularly imprinted nanoparticles for the efficient extraction of the model glycoprotein horseradish peroxidase

Magnetic molecularly imprinted nanoparticles (MMIPs) with improved dispersity and an increased number of adsorption sites are described. Uniform silica layers were first deposited on the surface of Fe₃O₄ nanoparticles (Fe₃O₄ NPs) in order to improve the dispersity of magnetic nanoparticles. Then, 4-formylphenylboronic acid (FPBA) as functional monomer was immobilized on the magnetic carriers to improve the efficiency of template eluting and rebinding. A thin layer of polyaniline imprinted with horseradish peroxidase (HRP) as a model glycoprotein was then placed on the magnetic nanoparticles to enhance the dispersity of the resultant MMIPs. These exhibit high adsorption capacity (62 mg g^?1), a satisfactory imprinting factor ( 3.78) and short adsorption equilibrium time (40 min) toward HRP, and the limit of detection is 18.7 μg L^?1. This kind of MMIPs, therefore, is deemed being a useful tool for extracting low-abundance glycoproteins from even complex samples.

Open image in new window

Graphical abstract Schematic of the preparation of magnetic molecular imprinted nanoparticles using Fe₃O₄ nanoparticles as carriers, 4-formylphenylboronic acid as functional monomer, aniline as cross linker and horseradish peroxidase as template. TEOS: tetraethyl orthosilicate; APTES: 3-aminopropyltriethoxysilane; FPBA: 4-formylphenylboronic acid; HRP: horseradish peroxidase.

     

A molecularly imprinted polymer for solid phase extraction of allantoin

We describe a molecularly imprinted polymer (MIP) for the solid-phase extraction of the skin protectant allantoin. The MIP was deposited on the surface of monodisperse silica microspheres possessing acroyl groups on the surface (MH-SiO₂). The resulting MIP microspheres (MH-SiO₂@MIP) showed a 3.4-fold higher adsorption capacity and a 1.9-fold better selectivity for allantoin than the respective non-imprinted polymer (MH-SiO₂@NIP). The monolayer adsorption capacities of the MH-SiO₂@MIP and the MH-SiO₂@NIP were calculated with the help of the Langmuir model and found to be 6.8 and 1.9 mg•g⁻¹, respectively. Adsorption kinetics fit a pseudo-second order rate mechanism, with an initial adsorption rate of 1.44 for the MH-SiO₂@MIP, and of 0.07 mg•g⁻¹•min⁻¹ for the MH-SiO₂@NIP. The material can be regenerated, and its adsorption capacity for allantoin remains stable for at least five regeneration cycles. It was successfully used as a sorbent for the selective solid-phase extraction of allantoin from Rhizoma dioscoreae.

A molecularly imprinted polymer for the selective separation of allantoin was developed. It was successfully used as a sorbent for the selective solid-phase extraction of allantoin from Rhizoma dioscoreae.

     

A molecularly imprinted polymer for solid phase extraction of allantoin

We describe a molecularly imprinted polymer (MIP) for the solid-phase extraction of the skin protectant allantoin. The MIP was deposited on the surface of monodisperse silica microspheres possessing acroyl groups on the surface (MH-SiO₂). The resulting MIP microspheres (MH-SiO₂@MIP) showed a 3.4-fold higher adsorption capacity and a 1.9-fold better selectivity for allantoin than the respective non-imprinted polymer (MH-SiO₂@NIP). The monolayer adsorption capacities of the MH-SiO₂@MIP and the MH-SiO₂@NIP were calculated with the help of the Langmuir model and found to be 6.8 and 1.9 mg?g^?1, respectively. Adsorption kinetics fit a pseudo-second order rate mechanism, with an initial adsorption rate of 1.44 for the MH-SiO₂@MIP, and of 0.07 mg?g^?1?min^?1 for the MH-SiO₂@NIP. The material can be regenerated, and its adsorption capacity for allantoin remains stable for at least five regeneration cycles. It was successfully used as a sorbent for the selective solid-phase extraction of allantoin from Rhizoma dioscoreae.

Application of molecularly imprinted polymer solid-phase extraction for salivary cotinine

A method constituted by molecularly imprinted solid-phase extraction (MISPE) with high-performance liquid chromatography coupled to diode array detector (HPLC-DAD) was developed for cotinine analysis in saliva samples. For this purpose, the separation was carried out with a C18 reversed-phase column at 20 °C. The mobile phase which was composed of a mixture of 09:91 (v/v) acetonitrile/phosphate buffer, pH 6.3, was delivered with isocratic flow rate at 1.4 mL min⁻¹. Employing MISPE, the best conditions were achieved with 1.5 mL of saliva plus 1.5 mL of 0.1 mol L⁻¹ of acetate buffer, pH 5.5, which were then passed through a cartridge previously conditioned with 2 mL acetonitrile, 2 mL methanol, and 2 mL of 0.1 mol L⁻¹ sodium acetate buffer, pH 5.5. The washing was carried out with 1 mL deionized water, 1 mL of 0.1 mol L⁻¹ sodium hydroxide, and 1 mL hexane; finally; the cotinine elution was carried out with 3 mL methanol/water (97.5: 2.5, v/v). Linearity ranged from 30 to 500 ng mL⁻¹ with r > 0.99. Intra-assay, interassay precision, and accuracy ranged from 3.1% to 10.1%, 5.2% to 15.9%, and 99.22% to 111.17%, respectively. The detection and quantification limits were 10 and 30 ng mL⁻¹, respectively. This investigation has provided a reliable method for routine cotinine determination in saliva, and it is an important tool for monitoring cigarette smoke exposure in smokers. The method was applied in five smokers’ samples who consumed around five to 20 cigarettes per day and the values of cotinine in saliva were from 66.7 to 316.16 ng mL⁻¹.     

Selective extraction of bisphenol A from water by one‐monomer molecularly imprinted magnetic nanoparticles

One‐monomer molecularly imprinted magnetic nanoparticles were prepared as adsorbents for selective extraction of bisphenol A from water in this study. A single bi‐functional monomer was adopted for preparation of the molecularly imprinted polymer, avoiding the tedious trial‐and‐error optimizations as traditional strategy. Moreover, bisphenol F was used as the dummy template for bisphenol A to avoid the interference from residual template molecules. These nanoparticles showed not only large adsorption capacity and good selectivity to the bisphenol A but also outstanding magnetic response performance. Furthermore, they were successfully used as magnetic solid‐phase extraction adsorbents of bisphenol A from various water samples, including tap water, river water, and seawater. The developed method was found to be much more efficient, convenient, and economical for selective extraction of bisphenol A compared with the traditional solid‐phase extraction. Separation of these nanoparticles can be easily achieved with an external magnetic field, and the optimized adsorption time was only 15 min. The recoveries of bisphenol A in different water samples ranged from 85.38 to 93.75%, with relative standard deviation lower than 7.47%. These results showed that one‐monomer molecularly imprinted magnetic nanoparticles had the potential to be popular adsorbents for selective extraction of pollutants from water.     

Preparation of molecularly imprinted polymers based on magnetic nanoparticles for the selective extraction of protocatechuic acid from plant extracts

In this study, highly selective core–shell molecularly imprinted polymers on the surface of magnetic nanoparticles were prepared using protocatechuic acid as the template molecule. The resulting magnetic molecularly imprinted polymers were characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, and vibrating sample magnetometry. The binding performances of the prepared materials were evaluated by static and selective adsorption. The binding isotherms were obtained for protocatechuic acid and fitted by the Langmuir isotherm model and Freundlich isotherm model. Furthermore, the resulting materials were used as the solid‐phase extraction materials coupled to high‐performance liquid chromatography for the selective extraction and detection of protocatechuic acid from the extracts of Homalomena occulta and Cynomorium songaricum with the recoveries in the range 86.3–102.2%.     

Magnetic molecularly imprinted polymer nanoparticles for the solid-phase extraction of paracetamol from plasma samples,followed its determination by HPLC

We are presenting magnetic molecularly imprinted polymer nanoparticles (m-MIPs) for solid-phase extraction and sample clean-up of paracetamol. The m-MIPs were prepared from magnetite (Fe₃O₄) as the magnetic component, paracetamol as the template, methacrylic acid as a functional monomer, and 2-(methacrylamido) ethyl methacrylate as a cross-linker. The m-MIPs were then characterized by transmission electron microscopy, FT-IR spectroscopy, X-ray diffraction and vibrating sample magnetometry. The m-MIPs were applied to the extraction of paracetamol from human blood plasma samples. Following its elution from the column loaded with the m-MIPs with an acetonitrile-buffer (9:1) mixture, it was submitted to HPLC analysis. Paracetamol can be quantified by this method in the 1 μg L^?1 to 300 μg L^?1 concentration range. The limit of detection and limit of quantification in plasma samples are 0.17 and 0.4 μg L^?1. The preconcentration factor of the m-MIPs is 40. The HPLC method shows good precision (4.5 % at 50 μg L^?1 levels) and recoveries (between 83 and 91 %) from spiked plasma samples. Figure

We are presenting magnetic molecularly imprinted polymer nanoparticles (m-MIPs) for solid-phase extraction and sample clean-up of paracetamol. The m-MIPs were applied to the extraction of paracetamol from human blood plasma samples     

Magnetic molecularly imprinted polymer nanoparticles for the solid-phase extraction of paracetamol from plasma samples,followed its determination by HPLC

We are presenting magnetic molecularly imprinted polymer nanoparticles (m-MIPs) for solid-phase extraction and sample clean-up of paracetamol. The m-MIPs were prepared from magnetite (Fe₃O₄) as the magnetic component, paracetamol as the template, methacrylic acid as a functional monomer, and 2-(methacrylamido) ethyl methacrylate as a cross-linker. The m-MIPs were then characterized by transmission electron microscopy, FT-IR spectroscopy, X-ray diffraction and vibrating sample magnetometry. The m-MIPs were applied to the extraction of paracetamol from human blood plasma samples. Following its elution from the column loaded with the m-MIPs with an acetonitrile-buffer (9:1) mixture, it was submitted to HPLC analysis. Paracetamol can be quantified by this method in the 1 μg L⁻¹ to 300 μg L⁻¹ concentration range. The limit of detection and limit of quantification in plasma samples are 0.17 and 0.4 μg L⁻¹. The preconcentration factor of the m-MIPs is 40. The HPLC method shows good precision (4.5 % at 50 μg L⁻¹ levels) and recoveries (between 83 and 91 %) from spiked plasma samples.

We are presenting magnetic molecularly imprinted polymer nanoparticles (m-MIPs) for solid-phase extraction and sample clean-up of paracetamol. The m-MIPs were applied to the extraction of paracetamol from human blood plasma samples

     

Selective molecularly imprinted polymer obtained from a combinatorial library for the extraction of bisphenol A

In the present work, an analytical methodology based on molecularly imprinted solid-phase extraction (MISPE) has been developed for the determination of bisphenol A (BPA) in environmental and food samples. In order to select the optimum material, a combinatorial library of molecularly imprinted polymers in small-scale (mini-MIPs) was prepared using BPA as template. Different monomers (methacrylic acid or 4-vinylpyridine), crosslinkers (ethylene glycol dimethacrylate or trimethylolpropane trimethacrylate) and porogens (methanol, acetonitrile or toluene) were used leading to 24 different polymerisation mixtures. After BPA removal, the ability of mini-MIPs to recognise BPA was evaluated by equilibrium rebinding-elution experiments. The copolymer of 4-vinylpyridine (4-VP) and trimethylolpropane trimethacrylate (TRIM) prepared in toluene showed the higher affinity for the template. Subsequently, a scaled-up version of the optimum polymer was prepared and used in the development of MISPE procedures for the extraction of BPA. The optimised MISPE protocols were successfully applied to the selective extraction of BPA from soils and aqueous canned peas samples.     

Novel molecularly imprinted magnetic nanoparticles for the selective extraction of protoberberine alkaloids in herbs and rat plasma

In this work, a novel magnetic nanomaterial functionalized with a molecularly imprinted polymer was prepared for the extraction of protoberberine alkaloids. Molecularly imprinted polymers were made on the surface of Fe₃O₄ nanoparticles by using berberine as template, acetonitrile/water as porogen, acrylamide as functional monomer and ethylene glycol dimethacrylate as cross‐linker. The optimized molar ratio of template/functional monomer was 1:7. The polymeric magnetic nanoparticles were characterized by transmission electron microscopy and Fourier transform infrared spectroscopy. The stability and adsorption capacity of the molecularly imprinted polymers were investigated. The molecularly imprinted polymers were used as a selective sorbent for the magnetic molecularly imprinted solid‐phase extraction and determination of jatrorrhizine, palmatine, and berberine. Extraction parameters were studied including loading pH, sample volume, stirring speed, and extraction time. Finally, a magnetic molecularly imprinted solid‐phase extraction coupled to high‐performance liquid chromatography method was developed. Under the optimized conditions, the method showed good linear range of 0.1–150 ng/mL for berberine and 0.1–100 ng/mL for jatrorrhizine and palmatine. The limit of detection was 0.01 ng/mL for berberine and 0.02 ng/mL for jatrorrhizine and palmatine. The proposed method has been applied to determine protoberberine alkaloids in Cortex phellodendri and rat plasma samples. The recoveries ranged from 87.33–102.43%, with relative standard deviation less than 4.54% in Cortex phellodendri and from 102.22–111.15% with relative standard deviation less than 4.59% in plasma.     

A new molecularly imprinted polymer for selective extraction of cotinine from urine samples by solid-phase extraction

Cotinine, the main metabolite of nicotine in human body, is widely used as a biomarker for assessment of direct or passive exposure to tobacco smoke. A method for molecularly imprinted solid-phase extraction (MISPE) of cotinine from human urine has been investigated. The molecularly imprinted polymer (MIP) with good selectivity and affinity for cotinine was synthesized using cotinine as the template molecule, methacrylic acid as the functional monomer, and ethylene glycol dimethacrylate as the cross-linker. The imprinted polymer was evaluated for use as a SPE sorbent, in tests with aqueous standards, by comparing recovery data obtained using the imprinted form of the polymer and a non-imprinted form (NIP). Extraction from the aqueous solutions resulted in more than 80% recovery. A range of linearity for cotinine between 0.05 and 5 μg mL⁻¹ was obtained by loading 1 mL blank urine samples spiked with cotinine at different concentrations in acetate buffer of pH 9.0, and by using double basic washing and acidic elution. The intra-day coefficient of variation (CV) was below 7% and inter-day CV was below 10%. This investigation has provided a reliable MISPE–HPLC method for determination of cotinine in human urine from both active smokers and passive smokers. Figure     

Synthesis of a molecularly imprinted polymer for the selective solid-phase extraction of chloramphenicol from honey

Solid-phase extraction (SPE) with a molecularly imprinted polymer (MIP) as sorbent has been investigated for the clean-up of the broad-spectrum bacteriostatic antibiotic chloramphenicol (CAP) in honey samples. The MIP was prepared by using methacrylic acid (MAA) as functional monomer, ethylene glycol dimethacrylate (EDMA) as cross-linker, chloroform as porogen and CAP as template molecule. The binding behaviour of the template CAP on the MIP was evaluated by high-performance liquid chromatography, and then the MIP was applied as a sorbent in SPE to selectively extract CAP from honey. It was shown that recoveries of nearly 100% of a CAP standard solution and up to 94% from spiked honey samples could be obtained after SPE.     

A new molecularly imprinted polymer for the on-column solid-phase extraction of diethylstilbestrol from aqueous samples

The estrogenic compound diethylstilbestrol (DES) is widely studied because of its potential endocrine disruption effects. The prohibition of the use of diethylstilbestrol as a growth promoter has not been enough to ensure the total disappearance of this compound from environmental matrices. Due to the low levels of DES present in the environment, preconcentration and clean up methods are necessary for its analysis. This paper describes the synthesis and use of a molecularly imprinted polymer (MIP) as sorbent for on-column solid-phase extraction of DES from aqueous samples. The selectivity of the DES-MIP was evaluated towards several selected estrogens such as hexestrol (HEX), estrone (E1), estriol (E3), estradiol (E2) and ethynylestradiol (EE2). HPLC-DAD was used to quantify all analytes at 230-nm wavelength. The method has been successfully applied to the analysis of DES in spiked river and tap water samples, with recoveries of 72% and 83% respectively.     

A molecularly imprinted polymer-coated nanocomposite of magnetic nanoparticles for estrone recognition

In this study, we synthesized Fe₃O₄ magnetic nanoparticles coated estrone-imprinted polymer with controlled size using a semi-covalent imprinting strategy. In this protocol, the estrone-silica monomer complex (EstSi) was synthesized by the reaction 3-(triethoxysilyl)propyl isocyanate with estrone, where the template was linked to the silica coating on the iron oxide core via a thermally reversible bond. The removal of the template by a simple thermal reaction produced specific estrone recognition sites on the surface of silica shell.The resulting estrone-imprinted polymer coating Fe₃O₄ magnetic hybrid nanoparticles exhibit a much higher specific recognition and saturation magnetization. The hybrid nanoparticles have been used for biochemical separation of estrone.     

Miniaturized molecularly imprinted polymer extraction method for the gas chromatographic analysis of flavonoids

In this study, the use of monolithic molecularly imprinted polymers in a micropipette tip format allowing the simple and fast extraction of flavonoids from standard solutions and a black tea sample is demonstrated. The imprinted polymer employed quercetin, methacrylic acid or 4‐vinylpyridine, and ethylene glycol dimethacrylate as template, functional monomer, and cross‐linker, respectively. Surface morphologies of the quercetin‐imprinted polymers and the corresponding nonimprinted polymers were characterized by SEM. Extraction of flavonoid standards was performed to evaluate the selectivity and recovery with these imprinted and nonimprinted polymers. Flavonoid compositions in aliquots eluted from the tips were identified using fast GC with flame ionization detection. Maximum specific capacities of 0.2, 5.7, and 16.0 mg/g for catechin, morin, and quercetin, respectively, were obtained with the imprinted polymer prepared with methacrylic acid, with the corresponding recoveries of 99.8, 98.8, and 95.4%, respectively. Efficient extraction by the quercetin‐imprinted polymer of epicatechin, catechin, and quercetin from an apple‐flavored black tea sample was achieved, with GC–MS employed for compound identification for both the tea and extracted samples.     

Solid-phase extraction using molecularly imprinted polymer for selective extraction of natural and synthetic estrogens from aqueous samples

A method is proposed for the clean-up and preconcentration of natural and synthetic estrogens from aqueous samples employing molecularly imprinted polymer (MIP) as selective sorbent for solid-phase extraction (SPE). The selectivity of the MIP was checked toward several selected natural and synthetic estrogens such as estrone (E1), 17β-estradiol (β-E2), 17α-estradiol (α-E2), estriol (E3), 17α-ethinylestradiol (EE2), dienestrol (DIES) and diethylstilbestrol (DES). Ultrahigh pressure liquid chromatography (UHPLC) coupled to a TSQ triple quadrupole mass spectrometry (QqQ) was used for analysis of target analytes. The chromatographic separation of the selected compounds was performed in less than 2 min under isocratic conditions. The method was applied to the analysis of estrogens in spiked river and tap water samples. High recoveries (>82%) for estrone, 17β-estradiol, 17α-estradiol, estriol and 17α-ethinylestradiol were obtained. Lower but still satisfactory recoveries (>48%) were achieved for dienestrol and diethylstilbestrol. The method was validated and found to be linear in the range 50-500 ng L(-1) with correlation coefficients (R(2)) greater than 0.995 and repeatability relative standard deviation (RSD) below 8% in all cases. For analysis of 100-mL sample, the method detection limits (LOD) ranged from 4.5 to 9.8 ng L(-1) and the limit of quantitation (LOQ) from 14.9 to 32.6 ng L(-1). To demonstrate the potential of the MIP obtained, a comparison with commercially available C(18) SPE was performed. Molecularly imprinted SPE showed higher recoveries than commercially available C(18) SPE for most of the compounds. These results showed the suitability of the MIP-SPE method for the selective extraction of a class of structurally related compounds such as natural and synthetic estrogens.     

替米考星磁性表面分子印迹聚合物的制备及应用

报道了一种替米考星磁性表面分子印迹聚合物吸附剂。它以Fe₃O₄@SiO₂为磁性基质，替米考星为模板分子，甲基丙烯酸为功能单体，通过硅烷化反应在Fe₃O₄@SiO₂表面键合上3-（甲基丙烯酰氧）丙基三甲氧基硅烷制备得到。该吸附剂对大环内酯类抗生素表现出高选择性和高富集能力（对4种模型大环内酯的富集倍数为212~675倍）。相比传统的非表面分子印迹聚合物，吸附平衡时间可缩短为30 min，可以重复使用至少6次；结合高效液相色谱-紫外检测，将该吸附剂应用于奶粉中4种大环内酯类抗生素的残留检测，所得检出限和定量限分别为0.58~1.36 μg/kg和1.92~4.55 μg/kg，日内（n=5）和日间（n=3）回收率在83.2%~123.0%之间，RSD均小于12.2%。