Tributyltin(IV) Schiff base complexes with amino acid derivatives: synthesis,characterization and biological activity

The synthesis in one‐pot reactions and structural characterization of six new tri‐n‐butyltin(IV) derivatives of Schiff bases are reported. The compounds are derived from a condensation reaction between l ‐alanine, l ‐valine, l ‐isoleucine, l ‐methionine, l ‐phenylalanine or l ‐tryptophan and 3,5‐di‐tert‐butyl‐2‐hydroxybenzaldehyde. Characterization was completed using elemental analysis, infrared spectroscopy, mass spectrometry, one‐ and two‐dimensional solution NMR (¹H, ¹³C and ¹¹⁹Sn) as well as solid‐state ¹¹⁹Sn NMR. In addition, the crystal structures of three of the compounds were confirmed using single‐crystal X‐ray diffraction. Although five‐coordinated and polymeric in the solid state, the tin compounds are four‐coordinated and monomeric in solution. The coordination environment around the triorganotin units comprises three carbon atoms and two oxygen atoms from two ligands in a trigonal bipyramidal geometry. The anti‐proliferative effect of these compounds on the cervical carcinoma cell lines HeLa, CaSki and ViBo was screened in vitro, the compounds showing cytotoxic activity against all three strains and null or low cytotoxic activity (necrotic) as well. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis,crystal structure,electronic spectroscopy,electrochemistry and biological studies of carbohydrate containing ferrocene amides

A series of four new ferrocene–carbohydrate amides was prepared from pentose and hexose sugar derivatives. These include (5‐amino‐5‐deoxy‐1,2‐O‐isopropylidene‐α‐d ‐xylofuranose)‐1‐ferrocene carboxamide (2a), (5‐amino‐3‐O‐benzyl‐5‐deoxy‐1,2‐O‐isopropylidene‐α‐d ‐xylofuranose)‐1‐ferrocene carboxamide (2b), (methyl‐6‐amino‐6‐deoxy‐2,3‐O‐isopropylidene‐β‐d ‐ribofuranoside)‐1‐ferrocene carboxamide (2c) derived from furanose sugars and (6‐amino‐6‐deoxy‐1,2:3,4‐di‐O‐isopropylidene‐α‐d ‐galactopyranose)‐1‐ferrocene carboxamide (2d) derived from pyranose sugar. The compounds were characterized by spectroscopic means and the structure of amide derived from α‐d ‐xylofuranose (2a) was determined by X‐ray crystallography. The electronic and optical properties of the compounds were studied by means of cyclic voltammetry and absorption spectroscopy. The UV and electrochemical studies of these compounds, performed in aqueous solutions under physiological conditions (at pH 7.4), confirmed their stability. These results indicated that the compounds were suitable for conducting biological studies. The CD spectral analysis displays the effect of sugar substituents on the compounds. The cytotoxicity and antimicrobial activity of these conjugates were investigated on different cancer cell lines and microbes respectively. The degree of inhibition varied over a broad spectrum of Gram‐ positive and Gram‐negative bacteria. In addition, the compounds also exhibited antioxidant properties. Copyright © 2012 John Wiley & Sons, Ltd.     

A Potential Carcinogenic Pyrene Derivative under Förster Resonance Energy Transfer to Various Energy Acceptors in Nanoscopic Environments

Picosecond‐resolved Förster resonance energy transfer (FRET) from various vibronic bands in benzo[a]pyrene (BP) shows a strong dependency on the spectral overlap of an energy acceptor in a confined environment. Our study on the dipolar interactions between BP and different acceptors, including ethidium (Et), acridine orange (AO), and crystal violet (CV), at the surface of a model anionic micelle revealed that the Förster distance (R₀) and the rate of energy transfer is dependent on the individual spectral overlap of the vibronic bands of BP with the absorption spectra of the different energy acceptors. The differential behavior of the vibronic bands is compared with that of different dyes [quantum dots (QDs)] in a “dye‐blend” (mixture) under FRET to an energy acceptor. Comparison of the FRET of the QDs with that of BP confirmed the independent nature of the dipolar interaction of the vibronic bands with other organic molecules, and the use of deconvolution techniques in the interpretation of the donor–acceptor (D –A) distance was also justified. We also showed that the consideration of differential FRET from the vibronic bands of BP and from the QDs in the dye‐blend is equally acceptable in theoretical frameworks including the Infelta–Tachiya model and D –A distribution analysis in nanoenvironments.     

Substituted Tetraaza‐ and Hexaazahexacenes and their N,N′‐Dihydro Derivatives: Syntheses,Properties, and Structures

The palladium‐catalyzed coupling of a substituted o‐diaminoanthracene and a substituted o‐diaminophenazine to substituted 2,3‐dichloroquinoxalines furnishes 10 differently substituted N,N′‐dihydrotetraaza‐ or ‐hexaazahexacenes with the quinoxaline group of the azaacenes carrying fluorine, chlorine, or nitro groups. The N,N′‐dihydrotetraazahexacenes with hydrogen, chlorine, and fluorine subtituents are oxidized to azaacenes, whereas only the parent N,N′‐dihydrohexaazahexacenes, with hydrogen substituents, are oxidized by MnO₂. The resultant azaacenes are characterized by their optical and spectroscopic data. In addition, single‐crystal X‐ray structures have been obtained for the parent tetraazahexacenes and their difluoro‐substituted derivatives. The di‐ and tetrachloro derivatives of the N,N′‐dihydrohexaazahexacene have also been structurally characterized.     

The influence of vinyl activating groups on β‐allyl sulfone‐based chain transfer agents for tough methacrylate networks

In radical polymerization of monofunctional monomers, addition fragmentation chain transfer (AFCT) agents are well known to regulate polymerization and yield polymers with lower molecular weights and narrower molecular weight distributions. Papers concerning bulk photopolymerization of monomer mixtures with AFCT agents are rarely found in literature. In this article, AFCT reagents based on β‐allyl sulfones with different vinyl activating groups were synthesized and compared. The compounds were tested in mono‐ and difunctional monomer systems providing information about the influence on photoreactivity, molecular weight, as well as thermal and mechanical properties of the resultant polymers. Where more potent activating groups (‐Ph, ‐CN) markedly influenced polymerization at lower concentrations, the AFCT reagent with an ester activating group reacted at a similar rate to the methacrylate monomer (C_T ≈ 1) and provided the best overall performance. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1417‐1427     

Synthesis and Characterization of Luminescent Cyclometalated Platinum(II) Complexes of 1,3‐Bis‐Hetero‐Azolylbenzenes with Tunable Color for Applications in Organic Light‐Emitting Devices through Extension of π Conjugation by Variation of the Heteroatom

A series of luminescent cyclometalated platinum(II) complexes of N^C^N ligands [N^C^N=2,6‐bis(benzoxazol‐2′‐yl)benzene (bzoxb), 2,6‐bis(benzothiazol‐2′‐yl)benzene (bzthb), and 2,6‐bis(N‐alkylnaphthoimidazol‐2′‐yl)benzene (naphimb)] has been synthesized and characterized. Two of the platinum(II) complexes have been structurally characterized by X‐ray crystallography. Their electrochemical, electronic absorption, and luminescence properties have been investigated. In dichloromethane solution at room temperature, the cyclometalated N^C^N platinum(II) complexes exhibited rich luminescence with well‐resolved vibronic‐structured emission bands. The emission energies of the complexes are found to be closely related to the electronic properties of the N^C^N ligands. By varying the electronic properties of the cyclometalated ligands, a fine‐tuning of the emission energies can be achieved, as supported by computational studies. Multilayer organic light‐emitting devices have been prepared by utilizing two of these platinum(II) complexes as phosphorescent dopants, in which a saturated yellow emission with Commission International de I′Eclairage coordinates of (0.50, 0.49) was achieved.     

Synthesis,Structure, Optical,and Electrochemical Properties of Triple‐ and Quadruple‐Decker Co‐facial Tetrathiafulvalene Arrays

Understanding the details of the electronic structure in face‐to‐face arranged tetrathiafulvalenes (TTFs) is very important for the design of supramolecular functional materials and superior conductive organic materials. This article is a comprehensive study of the interactions among columnar stacked TTFs using trimeric (trimer) and tetrameric (tetramer) TTFs linked by alkylenedithio groups (‐S(CH₂)_nS‐, n=1–4) as models of triple‐ and quadruple‐decker TTF arrays. Single‐crystal X‐ray analyses of neutral trimeric TTFs revealed that the three TTF moieties are oriented in a zigzag arrangement. Cyclic voltammetry measurements (CV) reveal that the trimer and tetramer exhibited diverse reversible redox processes with multi‐electron transfers, depending on the length of the ‐S(CH₂)_nS‐ units and substituents. The electronic spectra of the radical cations, prepared by electrochemical oxidation, showed charge resonance (CR) bands in the NIR/IR region (1630–1850 nm), attributed to a mixed valence (MV) state of the triple‐ and quadruple‐decker TTF arrays. In the trimeric systems, the dicationic state (+2; 0.66 cation per TTF unit) was found to be a stable state, whereas the monocationic state (+1) was not observed in the electronic spectra. In the tetrameric system, substituent‐dependent redox processes were observed. Moreover, π‐trimers and π‐tetramers, which show a significant Davydov blueshift in the spectra, are formed in the tricationic (trimer) and tetracationic (tetramer) state. In addition, these attractive interactions are strongly dependent on the length of the linkage unit.     

Benzo[c,d]indole‐Containing Aza‐BODIPY Dyes: Asymmetrization‐Induced Solid‐State Emission and Aggregation‐Induced Emission Enhancement as New Properties of a Well‐Known Chromophore

A series of symmetric and asymmetric benzo[c,d]indole‐containing aza boron dipyrromethene (aza‐BODIPY) compounds was synthesized by a titanium tetrachloride‐mediated Schiff‐base formation reaction of commercially available benzo[c,d]indole‐2(1H)‐one and heteroaromatic amines. These aza‐BODIPY analogues show different electronic structures from those of regular aza‐BODIPYs, with hypsochromic shifts of the main absorption compared to their BODIPY counterparts. In addition to the intense fluorescence in solution, asymmetric compounds exhibited solid‐state fluorescence due to significant contribution of the vibronic bands to both absorption and fluorescence as well as reduced fluorescence quenching in the aggregates. Finally, aggregation‐induced emission enhancement, which is rare in BODIPY chromophores, was achieved by introducing a nonconjugated moiety into the core structure.     

A Joint Theoretical and Experimental Study of the Behavior of the DIDS Inhibitor and its Derivatives

4,4′‐Diisothiocyanostilbene‐2,2′‐disulfonic acid (DIDS) is a well‐known ion‐exchange inhibitor targeting cardiac functions and indirectly impeding both radio‐ and chemo‐resistance. A joint computational and experimental study is presented to provide deeper insights into DIDS and other members of this family of compounds. To this end, we applied state‐of‐the‐art density functional theory (DFT) and time‐dependent DFT methods, in addition to measuring the optical properties. The experimental data show that such compounds are highly sensitive to their environment and that the optical properties change within as little time as 7 h. However, the optical properties of DIDS are similar in various acidic/basic environments, which were confirmed by pK_a computations on both cis and trans isomers. The protonation analysis also highlights that the singly protonated form of DIDS behaves like a proton sponge compound. The experimentally observed redshift that can be seen when going from water to DMSO was reproduced solely by using the solvation model based on density, although the polarization continuum model and implicit/explicit hybrid schemes were also tested. The characteristic broadening of the absorption peak in water and the vibronic fine structure in DMSO were also reproduced thanks to vibronic coupling simulations associated with the solvent reorganization energy. For other stilbene derivatives, a correlation is found between the maximum absorption wavelength and the Hammett parameters.     

Solid‐state complexes of poly(L‐histidine) with metal chlorides from the first row of the d‐block

Solid‐state characterization of poly(L ‐histidine) was obtained via differential scanning calorimetry, thermogravimetric analysis, optical microscopy, and infrared spectroscopy. The glass transition temperature of poly(L ‐histidine) is 169°C. This thermal transition has not been reported previously. Poly(L ‐histidine)'s T_g increases when complexes are produced with the following divalent transition metal chlorides: cobalt chloride hexahydrate, nickel chloride hexahydrate, copper chloride dihydrate, and anhydrous zinc chloride. At 10 mol % salt, nickel chloride increases T_g by 69°C. The enhancement in poly(L ‐histidine)'s T_g correlates well with ligand field stabilization energies for pseudo‐octahedral dⁿ complexes (n = 7, 8, and 10) from the first row of the d‐block. However, d⁹ copper(II) complexes do not conform to this empirical correlation. Infrared spectroscopic evidence indicates that these metal chlorides form complexes with the imidazole ring in the histidine side group and the amide group in the main chain of the polymer. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 301–309, 1999     

Synthesis,characterization, and properties of polyurethanes containing 1,4:3,6‐dianhydro‐D‐sorbitol

Two‐ and three‐component polyurethanes containing 1,4:3,6‐dianhydro‐D ‐sorbitol (isosorbide) derived from glucose were synthesized using n‐BuSn(?O)OH·H₂O as a catalyst, and the thermal properties (T_g, T_d) of the polymers were investigated by differential scanning calorimetry and thermogravimetric analysis. We carried out molds for polyurethanes, the molds of polyurethanes were obtained. The dynamic mechanical analyzes showed that the storage modulus values of the three‐component polymers were constant to a higher temperature than those of the two‐component polymers. The storage moduli (E′), loss moduli (E″), and values of tan δ for the polymers were obtained. The rigidity of three‐component polymers was increased by the introduction of bisphenol A and diphenylmethane group to two‐component polymer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6025–6031, 2009     

Polarized Absorption,Spontaneous and Stimulated Blue Light Emission of J‐type Tetraphenylbutadiene Monocrystals

Blue amplified spontaneous emission at room temperature is demonstrated from the exposed face of the strongly emitting organic semiconductor 1,1,4,4‐tetraphenyl‐1,3‐butadiene in single crystal form. The symmetry of the crystal and calculation of lattice sums indicate the J‐type organization of the molecular transition moments. The minimum in the lowest exciton dispersion branch, from which emission takes place, is found at the edge of the Brillouin zone leading to a dominant vibronic emission since the zero‐phonon line is forbidden. The observed gain narrowed line is attributed to the vibronic replica which becomes amplified with increased pumping. The reported emission is along the normal to the exposed crystal face, important for the development of vertical cavity geometry lasers based on organic single crystals. The threshold excitation fluence of 400 μJ cm^?2 is comparable to other organic crystalline systems, even if the amplification path is much reduced as a consequence of the vertical geometry. Considering these relevant aspects, the optical characterization of this material is provided. The polarized absorption spectra are reported and the properties of the lowest‐energy excitonic state investigated. Calculation of the electronic transitions for the isolated molecule, lattice sums for the transition at lowest energy, and the symmetry of the crystal allow attributing the largest face of the samples and the observed optical bands in the spectra. Polarized time‐resolved spectra are also reported allowing to identify the intrinsic excitonic emission.     

A Facile Molecular Machine: Optically Triggered Counterion Migration by Charge Transfer of Linear Donor‐π‐Acceptor Phosphonium Fluorophores

The D‐π‐A type phosphonium salts in which electron acceptor (A=‐⁺PR₃) and donor (D=‐NPh₂) groups are linked by polarizable π‐conjugated spacers show intense fluorescence that is classically ascribed to excited‐state intramolecular charge transfer (ICT). Unexpectedly, salts with π=‐(C₆H₄)_n‐ and ‐(C₁₀H₆C₆H₄)‐ exhibit an unusual dual emission (F₁ and F₂ bands) in weakly polar or nonpolar solvents. Time‐resolved fluorescence studies show a successive temporal evolution from the F₁ to F₂ emission, which can be rationalized by an ICT‐driven counterion migration. Upon optically induced ICT, the counterions move from ‐⁺PR₃ to ‐NPh₂ and back in the ground state, thus achieving an ion‐transfer cycle. Increasing the solvent polarity makes the solvent stabilization dominant, and virtually stops the ion migration. Providing that either D or A has ionic character (by static ion‐pair stabilization), the ICT‐induced counterion migration should not be uncommon in weakly polar to nonpolar media, thereby providing a facile avenue for mimicking a photoinduced molecular machine‐like motion.     

Development of a high‐performance liquid chromatography procedure to identify known and detect novel C‐13 oligosaccharide moieties in diterpene glycosides from Stevia rebaudiana (Bertoni) Bertoni (Asteraceae): Structure elucidation of rebaudiosides V and W

As an aid for structure elucidation of new steviol glycosides, reversed‐phase C18 high‐performance liquid chromatography method was developed with several previously characterized diterpene glycosides, to identify known and detect novel aglycone‐C13 oligosaccharide moieties and indirectly identify C‐19 interlinkages. Elution order of several diterpene glycosides and their aglycone‐C13 oligosaccharide substituted with different sugar arrangements were also summarized. Comparison of the retention time of a product obtained after alkaline hydrolysis with the aglycone‐C‐13 portions of known compounds reported herein allowed us to deduce the exact positions of the sugars in the C‐13 oligosaccharide portion. The elution position of several steviol glycosides with an ent‐kaurene skeleton was helpful to describe an identification key. Two previously uncharacterized diterpene glycosides together with two known compounds were isolated from a commercial Stevia rebaudiana leaf extract. One was found to be 13‐[(2‐O‐β‐d ‐xylopyranosyl‐ 3‐O‐β‐d ‐glucopyranosyl‐β‐d ‐glucopyranosyl)oxy]ent‐kaur‐16‐en‐19‐oic acid‐(2‐O‐β‐d ‐glucopyranosyl‐β‐d ‐glucopyranosyl) ester (rebaudioside V), whereas the other was determined to be 13‐[(2‐O‐β‐d ‐xylopyranosyl‐ 3‐O‐β‐d ‐glucopyranosyl‐β‐d‐ glucopyranosyl)oxy]ent‐kaur‐16‐en‐19‐oic acid‐(2‐O‐α‐l ‐rhamnopyranosyl‐3‐O‐β‐d ‐glucopyranosyl‐β‐d ‐glucopyranosyl) ester (rebaudioside W). Previously reported compounds were isolated in gram quantities and identified as rebaudioside J and rebaudioside H. In addition, a C‐19 sugar‐free derivative was also prepared from rebaudioside H to afford rebaudioside H₁. Chemical structures were partially determined by the high‐performance liquid chromatography method and unambiguously characterized by using one‐dimensional and two‐dimensional nuclear magnetic resonance experiments.     

A new phosphine oxide host based on ortho-disubstituted dibenzofuran for efficient electrophosphorescence: towards high triplet state excited levels and excellent thermal, morphological and efficiency stability

An efficient host for blue and green electrophosphorescence, 4,6‐bis(diphenylphosphoryl)dibenzofuran ( o‐ DBFDPO ), with the structure of a short‐axis‐substituted dibenzofuran was designed and synthesised. It appears that the greater density of the diphenylphosphine oxide (DPPO) moieties in the short‐axis substitution configuration effectively restrains the intermolecular interactions, because only very weak π–π stacking interactions could be observed, with a centroid‐to‐centroid distance of 3.960 Å. The improved thermal stability of o‐ DBFDPO was corroborated by its very high glass transition temperature (T_g) of 191 °C, which is the result of the symmetric disubstitution structure. Photophysical investigation showed o‐ DBFDPO to be superior to the monosubstituted derivative, with a longer lifetime (1.95 ns) and a higher photoluminescent quantum efficiency (61 %). The lower first singlet state excited level (3.63 eV) of o‐ DBFDPO demonstrates the stronger polarisation effect attributable to the greater number of DPPO moieties. Simultaneously, an extremely high first triplet state excited level (T₁) of 3.16 eV is observed, demonstrating the tiny influence of short‐axis substitution on T₁. The improved carrier injection ability, which contributed to low driving voltages of blue‐ and green‐emitting phosphorescent organic light‐emitting diodes (PHOLEDs), was further confirmed by Gaussian calculation. Furthermore, the better thermal and morphological properties of o ‐DBFDPO and the matched frontier molecular orbital (FMO) levels in the devices significantly reduced efficiency roll‐offs. Efficient blue and green electrophosphorescence based on the o ‐DBFDPO host was demonstrated.     

Synthesis of Mercaptobenzothiazole and Mercaptobenzimidazole Condensed with Inositol Derivatives

This work describes the synthesis of inositol derivatives condensed with 2‐mercaptobenzothiazole or 2‐mercaptobenzimidazole, potential antimicrobial agents. These compounds were prepared by ring opening of epoxide intermediate (2S,3R‐epoxy‐1‐O‐methyl‐ l ‐chiro‐inositol and 2R,3S‐epoxy‐1‐O‐methyl‐ l ‐chiro‐inositol), which were obtained from l ‐quebrachitol (1‐O‐methyl‐chiro‐inositol). Microwave irradiation was used to promote the condensation reaction.     

ortho‐(Aminomethyl)phenylboronic acids—synthesis,structure and sugar receptor activity

A series of ortho‐(aminomethyl)phenylboronic acids was synthesized and their structures were determined by single‐crystal X‐ray diffraction. The structures are stabilized by the inter‐ and intramolecular hydrogen bonds. The sugar‐binding ability of these compounds was evaluated for D ‐glucose, D ‐fructose and D ‐galactose by the competition assay with Alizarin Red S (ARS). The results indicate that the sugar binding ability and selectivity towards sugars depend on the substituents in amino group. Copyright © 2008 John Wiley & Sons, Ltd.     

Flavonol Glycosides with α‐Glucosidase Inhibitory Activities and New Flavone C‐Diosides from the Leaves of Machilus konishii

Seventeen flavonoids, five of which are flavone C‐diosides, 1 – 5 , were isolated from the BuOH‐ and AcOEt‐soluble fractions of the leaf extract of Machilus konishii. Among 1 – 5 , apigenin 6‐C‐β‐D ‐xylopyranosyl‐2″‐O‐β‐D ‐glucopyranoside ( 2 ), apigenin 8‐C‐α‐L ‐arabinopyranosyl‐2″‐O‐β‐D ‐glucopyranoside ( 4 ), and apigenin 8‐C‐β‐D ‐xylopyranosyl‐2″‐O‐β‐D ‐glucopyranoside ( 5 ) are new. Both 4 and 5 are present as rotamer pairs. The structures of the new compounds were elucidated on the basis of NMR‐spectroscopic analyses and MS data. In addition, the ¹H‐ and ¹³C‐NMR data of apigenin 6‐C‐α‐L ‐arabinopyranosyl‐2″‐O‐β‐D ‐glucopyranoside ( 3 ) were assigned for the first time. The isolated compounds were assayed against α‐glucosidase (type IV from Bacillus stearothermophilus). Kaempferol 3‐O‐(2‐β‐D ‐apiofuranosyl)‐α‐L ‐rhamnopyranoside ( 12 ) was found to possess the best inhibitory activity with an IC₅₀ value of 29.3 μM .     

Total Synthesis of the Bicyclic Depsipeptide HDAC Inhibitors Spiruchostatins A and B, 5′′‐epi‐Spiruchostatin B,FK228 (FR901228) and Preliminary Evaluation of Their Biological Activity

The bicyclic depsipeptide histone deacetylase (HDAC) inhibitors spiruchostatins A and B, 5′′‐epi‐spiruchostatin B and FK228 were efficiently synthesized in a convergent and unified manner. The synthetic method involved the following crucial steps: i) a Julia–Kocienski olefination of a 1,3‐propanediol‐derived sulfone and a L ‐ or D ‐malic acid‐derived aldehyde to access the most synthetically challenging unit, (3S or 3R,4E)‐3‐hydroxy‐7‐mercaptohept‐4‐enoic acid, present in a D ‐alanine‐ or D ‐valine‐containing segment; ii) a condensation of a D ‐valine‐D ‐cysteine‐ or D ‐allo‐isoleucine‐D ‐cysteine‐containing segment with a D ‐alanine‐ or D ‐valine‐containing segment to directly assemble the corresponding seco‐acids; and iii) a macrocyclization of a seco‐acid using the Shiina method or the Mitsunobu method to construct the requisite 15‐ or 16‐membered macrolactone. The present synthesis has established the C5′′ stereochemistry of spiruchostatin B. In addition, HDAC inhibitory assay and the cell‐growth inhibition analysis of the synthesized depsipeptides determined the order of their potency and revealed some novel aspects of structure–activity relationships. It was also found that unnatural 5′′‐epi‐spiruchostatin B shows extremely high selectivity (ca. 1600‐fold) for class I HDAC1 (IC₅₀=2.4 nM ) over class II HDAC6 (IC₅₀=3900 nM ) with potent cell‐growth‐inhibitory activity at nanomolar levels of IC₅₀ values.     

Intrinsic Photophysics of Light-harvesting Charge-tagged Chlorophyll a and b Pigments

Chlorophylls a and b (Chla/b) are responsible for light-harvesting by photosynthetic proteins in plants. They display broad absorption in the visible region with multiple bands, due to the asymmetry of the macrocycle and strong vibronic coupling. Their photophysics relies on the microenvironment, with regard to transition energies as well as quenching of triplet states. Here, we firmly establish the splitting of the Q and Soret bands into x- and y- polarized bands for the isolated molecules in vacuo, and resolve vibronic features. Storage-ring experiments reveal that dissociation of photoexcited charge-tagged complexes occurs over several milliseconds, but with two different time constants. A fast decay is ascribed to dissociation after internal conversion and a slow decay to the population of a triplet state that acts as a bottleneck. Support for the latter is provided by pump-probe experiments, where a second laser pulse probes the long-lived triplet state.