Property–Performance Control of Multidimensional,Hierarchical, Single‐Crystalline ZnO Nanoarchitectures

Diverse morphologies of multidimensional hierarchical single‐crystalline ZnO nanoarchitectures including nanoflowers, nanobelts, and nanowires are obtained by use of a simple thermal evaporation and vapour‐phase transport deposition technique by placing Au‐coated silicon substrates in different positions inside a furnace at process temperatures as low as 550 °C. The nucleation and growth of ZnO nanostructures are governed by the vapour–solid mechanism, as opposed to the commonly reported vapour–liquid–solid mechanism, when gold is used in the process. The morphological, structural, compositional and optical properties of the synthesized ZnO nanostructures can be effectively tailored by means of the experimental parameters, and these properties are closely related to the local growth temperature and gas‐phase supersaturation at the sample position. In particular, room‐temperature photoluminescence measurements reveal an intense near‐band‐edge ultraviolet emission at about 386 nm for nanobelts and nanoflowers, which suggests that these nanostructures are of sufficient quality for applications in, for example, optoelectronic devices.     

Morphology‐Dependent Gas‐Sensing Properties of ZnO Nanostructures for Chlorophenol

The crystal‐plane effect of ZnO nanostructures on the toxic 2‐chlorophenol gas‐sensing properties was examined. Three kinds of single‐crystalline ZnO nanostructures including nanoawls, nanorods, and nanodisks were synthesized by using different capping agents via simple hydrothermal routes. Different crystal surfaces were expected for these ZnO nanostructures. The sensing tests results showed that ZnO nanodisks exhibited the greatest sensitivity for the detection of toxic 2‐chlorophenol. The results revealed that the sensitivity of these ZnO samples was heavily dependent on their exposed surfaces. The polar (0001) planes were most reactive and could be considered as the critical factor for the gas‐sensing performance. In addition, calculations using density functional theory were employed to simulate the gas‐sensing reaction involving surface reconstruction and charge transfer both of which result in the change of electronic conductance of ZnO.     

Length‐Dependent Charge Generation from Vertical Arrays of High‐Aspect‐Ratio ZnO Nanowires

Aqueous chemical growth of zinc oxide nanowires is a flexible and effective approach to obtain dense arrays of vertically oriented nanostructures with high aspect ratio. Herein we present a systematic study of the different synthesis parameters that influence the ZnO seed layer and thus the resulting morphological features of the free‐standing vertically oriented ZnO nanowires. We obtained a homogeneous coverage of transparent conductive substrates with high‐aspect‐ratio nanowire arrays (length/diameter ratio of up to 52). Such nanostructured vertical arrays were examined to assess their electric and piezoelectric properties, and showed an electric charge generation upon mechanical compressive stress. The principle of energy harvesting with these nanostructured ZnO arrays was demonstrated by connecting them to an electronic charge amplifier and storing the generated charge in a series of capacitors. We found that the generated charge and the electrical behavior of the ZnO nanowires are strictly dependent on the nanowire length. We have shown the importance of controlling the morphological properties of such ZnO nanostructures for optimizing a nanogenerator device.     

Local‐Curvature‐Controlled Non‐Epitaxial Growth of Hierarchical Nanostructures

Site‐selective growth on non‐spherical seeds provides an indispensable route to hierarchical complex nanostructures that are interesting for diverse applications. However, this has only been achieved through epitaxial growth, which is restricted to crystalline materials with similar crystal structures and physicochemical properties. A non‐epitaxial growth strategy is reported for hierarchical nanostructures, where site‐selective growth is controlled by the curvature of non‐spherical seeds. This strategy is effective for site‐selective growth of silica nanorods from non‐spherical seeds of different shapes and materials, such as α‐Fe₂O₃, NaYF₄, and ZnO. This growth strategy is not limited by the stringent requirements of epitaxy and is thus a versatile general method suitable for the preparation of hierarchical nanostructures with controlled morphologies and compositions to open up a verity of applications in self‐assembly, nanorobotics, catalysis, electronics, and biotechnology.     

Photophysical Properties of Au‐CdTe Hybrid Nanostructures of Varying Sizes and Shapes

We design well‐defined metal‐semiconductor nanostructures using thiol‐functionalized CdTe quantum dots (QDs)/quantum rods (QRs) with bovine serum albumin (BSA) protein‐conjugated Au nanoparticles (NPs)/nanorods (NRs) in aqueous solution. The main focus of this article is to address the impacts of size and shape on the photophysical properties, including radiative and nonradiative decay processes and energy transfers, of Au‐CdTe hybrid nanostructures. The red shifting of the plasmonic band and the strong photoluminescence (PL) quenching reveal a strong interaction between plasmons and excitons in these Au‐CdTe hybrid nanostructures. The PL quenching of CdTe QDs varies from 40 to 86 % by changing the size and shape of the Au NPs. The radiative as well as the nonradiative decay rates of the CdTe QDs/QRs are found to be affected in the presence of both Au NPs and NRs. A significant change in the nonradiative decay rate from 4.72×10⁶ to 3.92×10¹⁰ s^?1 is obtained for Au NR‐conjugated CdTe QDs. It is seen that the sizes and shapes of the Au NPs have a pronounced effect on the distance‐dependent energy transfer. Such metal‐semiconductor hybrid nanostructures should have great potentials for nonlinear optical properties, photovoltaic devices, and chemical sensors.     

Synthesis of nano/micro zinc oxide rods and arrays by thermal evaporation approach on cylindrical shape substrate

Nano and micro ZnO rods and arrays have been synthesized by a simple thermal evaporation approach on a cylindrical shape substrate. Most of the synthesized ZnO products are single crystalline with a hexagonal structure and grow along the [0001] direction. Individual protrusive ZnO rods and well-aligned arrays are two typical products in our work. The individual protrusive ZnO rods have diameters of 25 nm approximately 2.1 microm and lengths from several hundred nanometers to 40 microm, while in the well-aligned arrays, the diameter and length of each ZnO rod range from 60 nm to 1.2 microm and from 4 microm to 6 microm, respectively. The heating temperature and deposition position are two key points to control the diameters of the rods. The growth mechanism is discussed and proposed. The perfect crystalline ZnO rods with different scales from nanometer to micrometer are good models for the investigation of the size effect of physical and chemical properties of one-dimensional material.     

Physicochemical Interaction of ZnO Fine Particles with 5‐Mono‐(4‐carboxyphenyl)‐10,15,20‐Triphenylporphyrin

This study deals with an investigation on the preparation and physicochemical interactions of ZnO nanoparticles with acid functionalized porphyrin [5‐mono‐(4‐carboxyphenyl)‐10,15,20‐triphenylporphyrin (CPTPP)] for photovoltaic applications in a detailed manner. Zinc acetate and sodium hydroxide were used as the starting materials for the synthesis of ZnO nanoparticles at 60 °C in an alcoholic medium. The freshly prepared fine particles were then functionalized with CPTPP. Both the virgin and pregnant ZnO particles were characterized by using UV‐Visible spectrophotometry (UV), fluorescence emission (PL), Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The band gap energy obtained for ZnO particles, having a value of 3.47 eV, shows significant quantum confinement effect and enhanced photophysical activity. FTIR analysis of the doped ZnO nanostructures showed the presences of some chemical species. SEM analysis revealed a clear change in the surface morphologies of undoped ZnO. The average crystallite size of nanoparticles, calculated from XRD peaks, was found in the nano regime. The lattice parameters calculated for ZnO nanocrystals were also found in good agreement with those given in the literature. From the enhancement in the red shift of the UV‐Vis spectra, it is concluded that hybridization of acid functionalized porphyrin can cause a significant expansion in the total absorption region of ZnO semiconductor for photovoltaic applications.     

Fabrication of Defined Polydopamine Nanostructures by DNA Origami‐Templated Polymerization

A versatile, bottom‐up approach allows the controlled fabrication of polydopamine (PD) nanostructures on DNA origami. PD is a biosynthetic polymer that has been investigated as an adhesive and promising surface coating material. However, the control of dopamine polymerization is challenged by the multistage‐mediated reaction mechanism and diverse chemical structures in PD. DNA origami decorated with multiple horseradish peroxidase‐mimicking DNAzyme motifs was used to control the shape and size of PD formation with nanometer resolution. These fabricated PD nanostructures can serve as “supramolecular glue” for controlling DNA origami conformations. Facile liberation of the PD nanostructures from the DNA origami templates has been achieved in acidic medium. This presented DNA origami‐controlled polymerization of a highly crosslinked polymer provides a unique access towards anisotropic PD architectures with distinct shapes that were retained even in the absence of the DNA origami template.     

Plasmon‐Mediated Syntheses of Metallic Nanostructures

The ability to prepare noble metal nanostructures of a desired composition, size, and shape enables their resulting properties to be exquisitely tailored, which has led to the use of these structures in numerous applications, ranging from medicine to electronics. The prospect of using light to guide nanoparticle reactions is extremely attractive since one can, in principle, regulate particle growth based on the ability of the nanostructures to absorb a specific excitation wavelength. Therefore, using the nature of light, one can generate a homogenous population of product nanoparticles from a heterogeneous starting population. The best example of this is afforded by plasmon‐mediated syntheses of metal nanoparticles, which use visible light irradiation and plasmon excitation to drive the chemical reduction of Ag⁺ by citrate. Since the initial discovery that Ag triangular prisms could be prepared by the photo‐induced conversion of Ag spherical nanoparticles, plasmon‐mediated synthesis has become a highly controllable technique for preparing a number of different Ag particles with tight control over shape, as well as a wide variety of Au‐Ag bimetallic nanostructures. We discuss the underlying physical and chemical factors that drive structural selection and conclude by outlining some of the important design considerations for controlling particle shape as learned through studies of plasmon‐mediated reactions, but applicable to all methods of noble metal nanocrystal synthesis.     

Ag/ZnO Catalysts with Different ZnO Nanostructures for Non‐enzymatic Detection of Urea

Silver coated ZnO nanorods and nanoflakes with different crystallographic orientations were synthesized by a combination of sputter deposition and solution growth process. Catalytic properties of morphology‐dependent Ag/ZnO nanostructures were then investigated for urea sensors without enzyme. Ag/ZnO nanorods on carbon electrodes exhibit a higher catalytic activity and an improved efficiency than Ag/ZnO nanoflakes on carbon electrodes. Ag/ZnO nanorod catalysts with more electrochemically surface area (169 cm² mg^?1) on carbon electrode facilitate urea electrooxidation due to easier electron transfer, which further promotes the urea electrolysis. The Ag/ZnO nanorod catalysts also show a significant reduction in the onset voltage (0.410 V vs. Ag/AgCl) and an increase in the current density (12.0 mA cm^?2 mg^?1) at 0.55 V vs Ag/AgCl. The results on urea electrooxidation show that Ag/ZnO nanostructures can be a potential catalyst for non‐enzymatic biosensors and fuel cells.     

A Solid‐State Fluorescent Host System with a 21‐Helical Column Consisting of Chiral (1R,2S)‐2‐Amino‐1,2‐diphenylethanol and Fluorescent 1‐Pyrenecarboxylic Acid

A solid‐state fluorescent host system was created by self‐assembly of a 2₁‐helical columnar organic fluorophore composed of (1R,2S)‐2‐amino‐1,2‐diphenylethanol and fluorescent 1‐pyrenecarboxylic acid. This host system has a characteristic 2₁‐helical columnar hydrogen‐ and ionic‐bonded network. Channel‐like cavities are formed by self‐assembly of this column, and various guest molecules can be included by tuning the packing of this column. Moreover, the solid‐state fluorescence of this host system can change according to the included guest molecules. This occurs because of the change in the relative arrangement of the pyrene rings as they adjust to the tuning of the packing of the shared 2₁‐helical column, according to the size of the included guest molecules. Therefore, this host system can recognize slight differences in molecular size and shape.     

Bottom‐Up Assembly of DNA–Silica Nanocomposites into Micrometer‐Sized Hollow Spheres

Although DNA nanotechnology has developed into a highly innovative and lively field of research at the interface between chemistry, materials science, and biotechnology, there is still a great need for methodological approaches for bridging the size regime of DNA nanostructures with that of micrometer‐ and millimeter‐sized units for practical applications. We report on novel hierarchically structured composite materials from silica nanoparticles and DNA polymers that can be obtained by self‐assembly through the clamped hybridization chain reaction. The nanocomposite materials can be assembled into thin layers within microfluidically generated water‐in‐oil droplets to produce mechanically stabilized hollow spheres with uniform size distributions at high throughput rates. The fact that cells can be encapsulated in these microcontainers suggests that our concept not only contributes to the further development of supramolecular bottom‐up manufacturing, but can also be exploited for applications in the life sciences.     

Incorporating Zn2SnO4 Quantum Dots and Aggregates for Enhanced Performance in Dye‐Sensitized ZnO Solar Cells

The performance of dye‐sensitized ZnO solar cells was improved by a facile surface‐treatment approach through chemical‐bath deposition. After the surface treatment, the quantum dots of Zn₂SnO₄ were deposited onto ZnO nanoparticles accompanied by the aggregations of Zn₂SnO₄ nanoparticles. The ZnO film displayed a better resistance to acidic dye solution on account of the deposited Zn₂SnO₄ nanoparticles. Meanwhile, the open‐circuit photovoltage was greatly enhanced, which can be ascribed to the increased conduction‐band edge of ZnO and inhibited interfacial charge recombination. Although the deposition of Zn₂SnO₄ decreased the adsorption amounts of N719 dye, the aggregates of Zn₂SnO₄ with a size of 350–450 nm acted as the effective light‐scattering layer, thereby resulting in an improved short‐circuit photocurrent. By co‐sensitizing 10 μm‐thick ZnO film with N719 and D131 dyes, a top efficiency of 4.38 % was achieved under the illumination of one sun (AM 1.5, 100 mW cm^?2).     

One‐pot dual size‐ and shape selective synthesis of tetrahedral Pt nanoparticles

One‐pot dual size‐ and shape‐selective synthesis of tetrahedral Pt nanoparticles is achieved using the pre‐prepared Pt nanoparticles as the ‘external seeds’, and controlling the slow diffusional growth under hydrogen reduction in the presence of PVP as the capping agent. Copyright © 2006 John Wiley & Sons, Ltd.     

One‐Step SnO2 Nanotree Growth

A comparison between Au, TiO₂ and self‐catalysed growth of SnO₂ nanostructures using chemical vapour deposition is reported. TiO₂ enables growth of a nanonetwork of SnO₂, whereas self‐catalysed growth results in nanoclusters. Using Au catalyst, single‐crystalline SnO₂ nanowire trees can be grown in a one‐step process. Two types of trees are identified that differ in size, presence of a catalytic tip, and degree of branching. The growth mechanism of these nanotrees is based on branch‐splitting and self‐seeding by the catalytic tip, facilitating at least three levels of branching, namely trunk, branch and leaf.     

Understanding the Effect Models of Ionic Liquids in the Synthesis of NH4‐Dw and γ‐AlOOH Nanostructures and Their Conversion into Porous γ‐Al2O3

Well‐dispersed ammonium aluminum carbonate hydroxide (NH₄‐Dw) and γ‐AlOOH nanostructures with controlled morphologies have been synthesized by employing an ionic‐liquid‐assisted hydrothermal process. The basic strategies that were used in this work were: 1) A controllable phase transition from NH₄‐Dw to γ‐AlOOH could be realized by increasing the reaction temperature and 2) the morphological evolution of NH₄‐Dw and γ‐AlOOH nanostructures could be influenced by the concentration of the ionic liquid. Based on these experimental results, the main objective of this work was to clarify the effect models of the ionic liquids on the synthesis of NH₄‐Dw and γ‐AlOOH nanostructures, which could be divided into cationic‐ or anionic‐dominant effect models, as determined by the different surface structures of the targets. Specifically, under the cationic‐dominant regime, the ionic liquids mainly showed dispersion effects for the NH₄‐Dw nanostructures, whereas the anionic‐dominant model could induce the self‐assembly of the γ‐AlOOH particles to form hierarchical structures. Under the guidance of the proposed models, the effect of the ionic liquids would be optimized by an appropriate choice of cations or anions, as well as by considering the different effect models with the substrate surface. We expect that such effect models between ionic liquids and the target products will be helpful for understanding and designing rational ionic liquids that contain specific functional groups, thus open up new opportunities for the synthesis of inorganic nanomaterials with new morphologies and improved properties. In addition, these as‐prepared NH₄‐Dw and γ‐AlOOH nanostructures were converted into porous γ‐Al₂O₃ nanostructures by thermal decomposition, whilst preserving the same morphology. By using HRTEM and nitrogen‐adsorption analysis, the obtained γ‐Al₂O₃ samples were found to have excellent porous properties and, hence, may have applications in catalysis and adsorption.     

Wall‐ and Hybridisation‐Selective Synthesis of Nitrogen‐Doped Double‐Walled Carbon Nanotubes

Controlled nitrogen‐doping is a powerful methodology to modify the properties of carbon nanostructures and produce functional materials for electrocatalysis, energy conversion and storage, and sensing, among others. Herein, we report a wall‐ and hybridisation‐selective synthetic methodology to produce double‐walled carbon nanotubes with an inner tube doped exclusively with graphitic sp²‐nitrogen atoms. Our measurements shed light on the fundamental properties of nitrogen‐doped nanocarbons opening the door for developing their potential applications.     

Ion‐Selective Formation of a Guanine Quadruplex on DNA Origami Structures

DNA origami nanostructures are a versatile tool that can be used to arrange functionalities with high local control to study molecular processes at a single‐molecule level. Here, we demonstrate that DNA origami substrates can be used to suppress the formation of specific guanine (G) quadruplex structures from telomeric DNA. The folding of telomeres into G‐quadruplex structures in the presence of monovalent cations (e.g. Na⁺ and K⁺) is currently used for the detection of K⁺ ions, however, with insufficient selectivity towards Na⁺. By means of FRET between two suitable dyes attached to the 3′‐ and 5′‐ends of telomeric DNA we demonstrate that the formation of G‐quadruplexes on DNA origami templates in the presence of sodium ions is suppressed due to steric hindrance. Hence, telomeric DNA attached to DNA origami structures represents a highly sensitive and selective detection tool for potassium ions even in the presence of high concentrations of sodium ions.     

Crystallization and stereocomplexation governed self‐assembling of poly(lactide)‐b‐poly(ethylene glycol) to mesoscale structures

The stereocomplex formation between enantioselective poly(lactide) (PLA) homopolymers is well understood. In this report an attempt is made to analyze the influence on the self‐assembling of the stereocomplex of enantiomorphic PLA‐PEG di‐ and tri‐blocks in different solvents. Powder diffraction studies showed the poly(ethylene glycol) (PEG) and the PLA blocks crystallize separately forming unique supra structures like rods, discs and coiled coils with dimensions in the micrometer scale in length and sub‐micrometer scale in diameter. The influence of the solvents on the crystal formation was shown in the formation of uniform structures. Discs emerged from equimolar mixtures of the D ‐ and L ‐configured di‐ and tri‐block copolymers, in dioxan and acetonitrile and in water the stereocomplexes crystallized mainly as rods. In some cases the rods were observed as coiled coils. The shape, the hydrophobic/hydrophilic content and the PEG coated surface of the discs give them a future potential as matrix for the controlled and targeted delivery of bioactive agents. Copyright © 2005 John Wiley & Sons, Ltd.     

Shape‐Controlled Growth of Carbon Nanostructures: Yield and Mechanism

Carbon nanostructures with precisely controlled shapes are difficult materials to synthesize. A facet‐selective‐catalytic process was thus proposed to synthesize polymer‐linked carbon nanostructures with different shapes, covering straight carbon nanofiber, carbon nano Y‐junction, carbon nano‐hexapus, and carbon nano‐octopus. A thermal chemical vapor deposition process was applied to grow these multi‐branched carbon nanostructures at temperatures lower than 350 °C. Cu nanoparticles were utilized as the catalyst and acetylene as the reaction gas. The growth of those multi‐branched nanostructures was realized through the selective growth of polymer‐like sheets on certain indexed facets of Cu catalyst. The vapor–facet–solid (VFS) mechanism, a new growth mode, has been proposed to interpret such a growth in the steps of formation, diffusion, and coupling of carbon‐containing oligomers, as well as their final precipitation to form nanostructures on the selective Cu facets.