tBuLi‐Mediated One‐Pot Direct Highly Selective Cross‐Coupling of Two Distinct Aryl Bromides

A Pd‐catalyzed direct cross‐coupling of two distinct aryl bromides mediated by tBuLi is described. The use of [Pd‐PEPPSI‐IPr] or [Pd‐PEPPSI‐IPent] as catalyst allows for the efficient one‐pot synthesis of unsymmetrical biaryls at room temperature. The key for this selective cross‐coupling is the use of an ortho‐substituted bromide that undergoes lithium–halogen exchange preferentially.     

Amination with Pd-NHC complexes: rate and computational studies involving substituted aniline substrates

The amination of aryl chlorides with various aniline derivatives using the N-heterocyclic carbene-based Pd complexes Pd-PEPPSI-IPr and Pd-PEPPSI-IPent (PEPPSI=pyridine, enhanced precatalyst, preparation, stabilization, and initiation; IPr=diisopropylphenylimidazolium derivative; IPent= diisopentylphenylimidazolium derivative) has been studied. Rate studies have shown a reliance on the aryl chloride to be electron poor, although oxidative addition is not rate limiting. Anilines couple best when they are electron rich, which would seem to discount deprotonation of the intermediate metal ammonium complex as being rate limiting in favour of reductive elimination. In previous studies with secondary amines using PEPPSI complexes, deprotonation was proposed to be the slow step in the cycle. These experimental findings relating to mechanism were corroborated by computation. Pd-PEPPSI-IPr and the more hindered Pd-PEPPSI-IPent catalysts were used to couple deactivated aryl chlorides with electron poor anilines; while the IPr catalysis was sluggish, the IPent catalyst performed extremely well, again showing the high reactivity of this broadly useful catalyst.     

Highly efficient Pd‐PEPPSI‐IPr catalyst for N‐(4‐pyridazinyl)‐bridged bicyclic sulfonamides via Suzuki–Miyaura coupling reaction

A protocol for the Suzuki–Miyaura coupling of novel 2‐(6‐chloropyridazin‐3‐yl)‐5‐(aryl/heteroarylsulfonyl)‐2,5‐diazabicyclo[2.2.1]heptanes and heteroarylboronic acids to afford variety of coupled products was realized. Pd‐PEPPSI‐IPr catalyst was found to be a powerful and reusable catalyst under relatively mild reaction conditions.     

Pd‐PEPPSI‐IPent‐SiO2: A Supported Catalyst for Challenging Negishi Coupling Reactions in Flow

A silica‐supported precatalyst, Pd‐PEPPSI‐IPent‐SiO₂, has been prepared and evaluated for its proficiency in the Negishi cross‐coupling of hindered and electronically deactivated coupling partners. The precatalyst Pd‐PEPPSI‐IPent loaded onto packed bed columns shows high catalytic activity for the room‐temperature coupling of deactivated/hindered biaryl partners. Also for the first time, the flowed Csp³–Csp² coupling of secondary alkylzinc reagents to (hetero)aromatics has been achieved with high selectivity with Pd‐PEPPSI‐IPent‐SiO₂. These couplings required residence times as short as 3 minutes to effect completion of these challenging transformations with excellent selectivity for the nonrearranged product.     

Selective Monoarylation of Primary Amines Using the Pd‐PEPPSI‐IPentCl Precatalyst

A single set of reaction conditions for the palladium‐catalyzed amination of a wide variety of (hetero)aryl halides using primary alkyl amines has been developed. By combining the exceptionally high reactivity of the Pd‐PEPPSI‐IPent^Cl catalyst (PEPPSI=pyridine enhanced precatalyst preparation, stabilization, and initiation) with the soluble and nonaggressive sodium salt of BHT (BHT=2,6‐di‐tert‐butyl‐hydroxytoluene), both six‐ and five‐membered (hetero)aryl halides undergo efficient and selective amination.     

An Alternative Approach to PEPPSI Catalysts: From Palladium Isonitriles to Highly Active Unsymmetrically Substituted PEPPSI Catalysts

A series of new pyridine‐enhanced precatalyst preparation, stabilization, and initiation (PEPPSI)‐type complexes bearing different types of carbene ligands was prepared by the modular and convergent template synthesis strategy. Nitrogen acyclic carbenes, saturated and unsaturated five‐membered NHC, saturated six‐membered NHCs, and five‐membered N‐heterocyclic oxo‐carbene (NHOC) ligands on palladium were prepared this way. These new organometallic compounds then were tested in Suzuki and Negishi cross‐coupling reactions by using substrates with one or two substituents in ortho‐position of the new C?C bond being formed. Both aryl chlorides and bromides were tested as coupling partners. In some cases, the new ligands gave results similar to Organ’s successful IPr‐based and IPent‐based PEPPSI derivatives, with aryl bromides 0.05 mol % catalyst load still gave satisfactory results, with aryl chlorides 0.5 mol % were needed.     

[(IPent)PdCl2(morpholine)]: A Readily Activated Precatalyst for Room‐Temperature,Additive‐Free Carbon–Sulfur Coupling

A series of new, easily activated NHC–Pd^II precatalysts featuring a trans‐oriented morpholine ligand were prepared and evaluated for activity in carbon‐sulfur cross‐coupling chemistry. [(IPent)PdCl₂(morpholine)] (IPent=1,3‐bis(2,6‐di(3‐pentyl)phenyl)imidazol‐2‐ylidene) was identified as the most active precatalyst and was shown to effectively couple a wide variety of deactivated aryl halides with both aryl and alkyl thiols at or near ambient temperature, without the need for additives, external activators, or pre‐activation steps. Mechanistic studies revealed that, in contrast to other common NHC–Pd^II precatalysts, these complexes are rapidly reduced to the active NHC–Pd⁰ species at ambient temperature in the presence of KOtBu, thus avoiding the formation of deleterious off‐cycle Pd^II–thiolate resting states.     

Phase‐Separable Polyisobutylene Palladium‐PEPPSI Precatalysts: Synthesis and Application in Buchwald–Hartwig Amination

This paper reports the efficient synthesis of the first class of polyisobutylene(PIB)‐supported palladium‐PEPPSI precatalyst (PEPPSI = pyridine‐enhanced precatalyst preparation, stabilization, and initiation). The new complexes are employed in Buchwald–Hartwig amination of aryl chlorides and are found to be reasonably active in the titled cross‐coupling reaction. The supported catalysts are tested in polar (1,4‐dioxane and 1,2‐dimethoxyethane) as well as in aliphatic reaction media (toluene and n‐heptane) and display superior activity in the highly lipophilic solvent (n‐heptane). The catalytic efficacy of PIB‐Pd‐PEPPSI precatalyst is measured to be comparable to its nonsupported analog. Pd‐leaching is determined by inductively coupled plasma mass spectrometry (ICP‐MS) after a simple liquid/liquid extraction and is found to be 2 ppb in the product phase, translating into a recovery of ≈99.8% of the palladium.     

Cobalt‐Catalyzed Intermolecular C(sp2)O Cross‐Coupling

Cobalt(II)‐catalyzed C(sp²)?O cross‐coupling between aryl/heteroaryl alcohols and vinyl/aryl halides in the presence of Cu^I has been achieved under ligand‐free conditions. In this reaction, copper plays a significant role in transmetalation rather than being directly involved in the C?O coupling. This unique Co/Cu‐dual catalyst system provides an easy access to a library of aryl–vinyl, heteroaryl–styryl, aryl–aryl, and heteroaryl–heteroaryl ethers in the absence of any ligand or additive.     

The Selective Cross‐Coupling of Secondary Alkyl Zinc Reagents to Five‐Membered‐Ring Heterocycles Using Pd‐PEPPSI‐IHeptCl

The ability to cross‐couple secondary alkyl centers is fraught with a number of problems, including difficult reductive elimination, which often leads to β‐hydride elimination. Whereas catalysts have been reported that provide decent selectivity for the expected (non‐rearranged) cross‐coupled product with aryl or heteroaryl oxidative‐addition partners, none have shown reliable selectivity with five‐membered‐ring heterocycles. In this report, a new, rationally designed catalyst, Pd‐PEPPSI‐IHept^Cl, is demonstrated to be effective in selective cross‐coupling reactions with secondary alkyl reagents across an impressive variety of furans, thiophenes, and benzo‐fused derivatives (e.g., indoles, benzofurans), in most instances producing clean products with minimal, if any, migratory insertion for the first time.     

A Robust and Broadly Applicable Cobalt‐Catalyzed Cross‐Coupling of Functionalized Bench‐Stable Organozinc Pivalates with Unsaturated Halides

We report a robust and broadly applicable CoCl₂‐catalyzed cross‐coupling between functionalized aryl and heteroaryl zinc pivalates and various electron‐poor aryl and heteroaryl halides (X=Cl, Br, I). Couplings with (E)‐ or (Z)‐bromo‐ or iodo‐alkenes proceed with retention of configuration. Also, alkynyl bromides react with arylzinc pivalates providing arylated alkynes.     

Csp2–O and C–C Bond Formation via Pd‐Catalyzed Coupling Reaction of 2,4‐Dichloroquinazoline

An efficient palladium‐catalyzed C–O and subsequent C–C bond formation of 2,4‐dichloroquinazoline have been described. The designed strategy results in the synthesis of novel 2‐arylated quinazolin‐4‐ones framework with various aryl/heteroaryl boronic acids in moderate to good yields along with 2,4‐diarylated quinazolines. This methodology offers a direct transformation of aryl halides to aryl alcohols/ketone as well as the straight forward application to generate a wide variety of monoaryl and diaryl quinazoline.     

Preparation of Solid,Substituted Allylic Zinc Reagents and Their Reactions with Electrophiles

The treatment of various allylic chlorides or bromides with zinc dust in the presence of lithium chloride and magnesium pivalate (Mg(OCOtBu)₂) in THF affords allylic zinc reagents which, after evaporation of the solvent, produce solid zinc reagents that display excellent thermal stability. These allylic reagents undergo Pd‐catalyzed cross‐coupling reactions with PEPPSI‐IPent, as well as highly regioselective and diastereoselective additions to aryl ketones and aldehydes. Acylation with various acid chlorides regioselectively produces the corresponding homoallylic ketones, with the new C? C bond always being formed on the most hindered carbon of the allylic system.     

Synthesis of a Library of Fluorescent 2‐Aryl‐3‐trifluoromethylnaphthofurans from Naphthols by Using a Sequential Pummerer‐Annulation/Cross‐Coupling Strategy and their Photophysical Properties

A library of 2‐aryl‐3‐trifluoromethylnaphthofurans was synthesized with high efficiency from simple naphthols. In this synthesis, the Pummerer‐type annulation of naphthols with 3‐(2,2,2‐trifluoroethylidene)‐2,4‐dithiapentane 2‐oxide was followed by a cross‐coupling of the resulting 2‐methylthio‐3‐trifluoromethylnaphthofurans with a variety of arylzinc reagents. A palladium complex, Pd‐PEPPSI‐IPr, was the most efficient catalyst for the arylation step, which represents the first cross‐coupling of aryl sulfides by using an N‐heterocyclic‐carbene‐ligated palladium complex. This library consists of new π‐expanded molecules, all of which are fluorescent in the solid state as well as in solution. Their photophysical properties, such as absorption and emission, fluorescence quantum yields, and fluorescence lifetimes, were thoroughly investigated. This library was also useful to identify acidochromic molecules.     

Palladium Membrane‐Installed Microchannel Devices for Instantaneous Suzuki–Miyaura Cross‐Coupling

Instantaneous catalytic carbon–carbon bond‐forming reactions were achieved in catalytic membrane‐installed microchannel devices that have a polymeric palladium‐complex membrane. The catalytic membrane‐installed microchannel devices were provided inside the microchannels by means of coordinative and ionic molecular convolution at the interface between the organic and aqueous phases flowing laminarly, in which both non‐crosslinked linear polymer ligands and palladium species dissolved. The palladium‐catalyzed Suzuki–Miyaura reaction of aryl, heteroaryl, and alkenyl halides with arylboronic acids and sodium tetraarylborates was performed with the catalytic membrane‐installed microchannel devices to give quantitative yields of biaryls, heterobiaryls, and aryl alkenes within 5 s of residence time in the defined channel region. These microchannel devices were applied to the instantaneous allylic arylation reaction of allylic esters with arylboron reagents under microflow conditions to afford the corresponding coupling products within 1 s of residence time.     

PEPPSI‐Type Palladium Complexes Containing Basic 1,2,3‐Triazolylidene Ligands and Their Role in Suzuki–Miyaura Catalysis

A series of PEPPSI‐type palladium(II) complexes was synthesized that contain 3‐chloropyridine as an easily removable ligand and a triazolylidene as a strongly donating mesoionic spectator ligand. Catalytic tests in Suzuki–Miyaura cross‐coupling reactions revealed the activity of these complexes towards aryl bromides and aryl chlorides at moderate temperatures (50 °C). However, the impact of steric shielding was the inverse of that observed with related normal Nheterocyclic carbenes (imidazol‐2‐ylidenes) and sterically congested mesityl substituents induced lower activity than small alkyl groups. Mechanistic investigations, including mercury poisoning experiments, TEM analyses, and ESI mass spectrometry, provide evidence for ligand dissociation and the formation of nanoparticles as a catalyst resting state. These heterogeneous particles provide a reservoir for soluble palladium atoms or clusters as operationally homogeneous catalysts for the arylation of aryl halides. Clearly, the substitution of a normal N‐heterocyclic carbene for a more basic triazolylidene ligand in the precatalyst has a profound impact on the mode of action of the catalytic system.     

Palladium‐Catalyzed Heteroarylation and Concomitant ortho‐Alkylation of Aryl Iodides

Three‐component couplings were achieved from common aryl halides, alkyl halides, and heteroarenes under palladium and norbornene co‐catalysis. The reaction forges hindered aryl–heteroaryl bonds and introduces ortho‐alkyl groups to aryl rings. Various heterocycles such as oxazoles, thiazoles and thiophenes underwent efficient coupling. The heteroarenes were deprotonated in situ by bases without the assistance of palladium catalysts.     

A General Palladium‐Catalyzed Hiyama Cross‐Coupling Reaction of Aryl and Heteroaryl Chlorides

A general palladium‐catalyzed Hiyama cross‐coupling reaction of aryl and heteroaryl chlorides with aryl and heteroaryl trialkoxysilanes by a Pd(OAc)₂/ L2 catalytic system is presented. A newly developed water addition protocol can dramatically improve the product yields. The conjugation of the Pd/ L2 system and the water addition protocol can efficiently catalyze a broad range of electron‐rich, ‐neutral, ‐deficient, and sterically hindered aryl chlorides and heteroaryl chlorides with excellent yields within three hours and the catalyst loading can be down to 0.05 mol % Pd for the first time. Hiyama coupling of heteroaryl chlorides with heteroaryl silanes is also reported for the first time. The reaction can be easily scaled up 200 times (100 mmol) without any degasification and purification of reactants; this facilitates the practical application in routine synthesis.     

Simple syntheses of benzothiazol‐2‐ylazoles

Syntheses of the title ring systems are described starting with benzothiazol‐2‐ylacetohydrazide (1). Thus, 1 was reacted with carbon disulfide to afford the 2‐methyl heteroaryl derivative 2, which on reaction with hydrazine hydrate yielded the corresponding triazole compound 3. Also, 1 can undergo a reaction with an isothiocyanate to give the N‐thiocarbonyl adduct 4 that can then be cyclized to produce a 2‐methyl heteroaryl analog 5 or 6. Compounds 8 or 9 could be obtained by the reaction of 1 with an aryl aldehyde followed by malononitrile or via its self‐cyclization, respectively. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 177–182, 1999     

Palladium‐catalysed room‐temperature Suzuki–Miyaura coupling in water extract of pomegranate ash,a bio‐derived sustainable and renewable medium

An agro waste‐derived, ‘water extract of pomegranate ash’ (WEPA), has been utilized for the first time as a renewable medium for Pd(OAc)₂‐catalysed Suzuki–Miyaura cross‐coupling at room temperature. This method offers a simple and sustainable synthesis of biaryls from aryl halides and arylboronic acids under ligand‐ and external base‐free aerobic and ambient conditions. This method has been found effective for both activated and unactivated aryl halides in the production of biaryls with moderate to nearly quantitative yields. The protocol shows high chemoselectivity over identical/similar reactive sites in aryl halides (i.e. selectivity over identical halogens or different halogens of aryl halides). This method exhibits high regioselectivity, i.e. the selective reactivity of a halogen over other identical halogens at different positions on the aromatic nucleus. Therefore, we disclose here a clean, benign, substantial chemo‐ and regioselective and highly economic alternative method for the palladium‐assisted synthesis of biaryls using an agro waste‐derived medium.