σ‐Insertive Mechanism versus Concerted Non‐insertive Mechanism in the Intramolecular Hydroamination of Aminoalkenes Catalyzed by Phenoxyamine Magnesium Complexes: A Synthetic and Computational Study

The phenoxyamine magnesium complexes [{ONN}MgCH₂Ph] ( 4 a : {ONN}=2,4‐tBu₂‐6‐(CH₂NMeCH₂CH₂NMe₂)C₆H₂O^?; 4 b : {ONN}=4‐tBu‐2‐(CH₂NMeCH₂CH₂NMe₂)‐6‐(SiPh₃)C₆H₂O^?) have been prepared and investigated with respect to their catalytic activity in the intramolecular hydroamination of aminoalkenes. The sterically more shielded triphenylsilyl‐substituted complex 4 b exhibits better thermal stability and higher catalytic activity. Kinetic investigations using complex 4 b in the cyclisation of 1‐allylcyclohexyl)methylamine ( 5 b ), respectively, 2,2‐dimethylpent‐4‐en‐1‐amine ( 5 c ), reveal a first‐order rate dependence on substrate and catalyst concentration. A significant primary kinetic isotope effect of 3.9±0.2 in the cyclisation of 5 b suggests significant N?H bond disruption in the rate‐determining transition state. The stoichiometric reaction of 4 b with 5 c revealed that at least two substrate molecules are required per magnesium centre to facilitate cyclisation. The reaction mechanism was further scrutinized computationally by examination of two rivalling mechanistic pathways. One scenario involves a coordinated amine molecule assisting in a concerted non‐insertive N?C ring closure with concurrent amino proton transfer from the amine onto the olefin, effectively combining the insertion and protonolysis step to a single step. The alternative mechanistic scenario involves a reversible olefin insertion step followed by rate‐determining protonolysis. DFT reveals that a proton‐assisted concerted N?C/C?H bond‐forming pathway is energetically prohibitive in comparison to the kinetically less demanding σ‐insertive pathway (ΔΔG^≠=5.6 kcal mol^?1). Thus, the σ‐insertive pathway is likely traversed exclusively. The DFT predicted total barrier of 23.1 kcal mol^?1 (relative to the {ONN}Mg pyrrolide catalyst resting state) for magnesium?alkyl bond aminolysis matches the experimentally determined Eyring parameter (ΔG^≠=24.1(±0.6) kcal mol^?1 (298 K)) gratifyingly well.     

Origin of diastereoselectivity in the organolanthanide-mediated intramolecular hydroamination/cyclisation of aminodienes: a computational exploration of constrained geometry CGC-Ln catalysts

The regulation of ring-substituent diastereoselectivity in the intramolecular hydroamination/cyclisation (IHC) of alpha-substituted aminodienes by constrained geometry CGC-lanthanide catalysts (CGC=[Me(2)Si(eta(5)-Me(4)C(5))(tBuN)](2-)) has been elucidated by means of a reliable DFT method. The first survey of relevant elementary steps for the 1-methyl-(4E,6)-heptadienylamine substrate (1) and the [{Me(2)Si(eta(5)-Me(4)C(5))(tBuN)}Sm{N(TMS)(2)}] starting material (2) identified the following general mechanistic aspects of Ln-catalysed aminodiene IHC. The substrate-adduct 3-S of the active CGC-Ln-amidodiene compound represents the catalyst's resting state, but the substrate-free form 3' with a chelating amidodiene functionality is the direct precursor for cyclisation. This step proceeds with almost complete regioselectivity through exocyclic ring closure by means of a frontal trajectory, giving rise to the CGC-Ln-azacycle intermediate 4. Subsequent protonolysis of 4 is turnover limiting, whilst the ring-substituent diastereoselectivity is dictated by exocyclic ring closure. Unfavourable close interatomic contacts between the substrate's alpha-substituent and the catalyst backbone have been shown to largely govern the trans/cis selectivity. Substituents of sufficient bulk in the alpha-position of the substrate have been identified as being vital for stereochemical induction. The present study has indicated that the diastereoselectivity of ring closure can be considerably modulated. The variation of the lanthanide's ionic radius and introduction of extra steric pressure at the substrate's alpha-position and/or the CGC N centre have been identified as effective handles for tuning the selectivity. The quantification of these factors reported herein represents the first step toward the rational design of improved CGC-Ln catalyst architectures and will thus aid this process.     

Computational Mechanistic Elucidation of the Intramolecular Aminoalkene Hydroamination Catalysed by Iminoanilide Alkaline‐Earth Compounds

A comprehensive computational exploration of plausible alternative mechanistic pathways for the intramolecular hydroamination (HA) of aminoalkenes by a recently reported class of kinetically stabilised iminoanilide alkaline‐earth silylamido compounds [{N^N}Ae{N(SiMe₃)₂} ? (thf)_n] ({N^N}=iminoanilide; Ae=Ca, Sr, Ba) is presented. On the one hand, a proton‐assisted concerted N?C/C?H bond‐forming pathway to afford the cycloamine in a single step can be invoked and on the other hand, a stepwise σ‐insertive pathway that involves a fast, reversible migratory olefin 1,2‐insertion step linked to a less rapid, irreversible metal?C azacycle tether σ‐bond aminolysis. Notably, these alternative mechanistic avenues are equally consistent with reported key experimental features. The present study, which employs a thoroughly benchmarked and reliable DFT methodology, supports the prevailing mechanism to be a stepwise σ‐insertive pathway that sees an initial conversion of the {N^N}Ae silylamido into the catalytically competent {N^N}Ae amidoalkene compound and involves thereafter facile and reversible insertive N?C bond‐forming ring closure, linked to irreversible intramolecular Ae?C tether σ‐bond aminolysis at the transient {N^N}Ae alkyl intermediate. Turnover‐limiting protonolysis accounts for the substantial primary kinetic isotope effect observed; its DFT‐derived barrier satisfactorily matches the empirically determined Eyring parameter and predicts the decrease in rate observed across the series Ca>Sr>Ba correctly. Non‐competitive kinetic demands militate against the operation of the concerted proton‐assisted pathway, which describes N?C bond‐forming ring closure triggered by concomitant amino proton delivery at the C?C linkage evolving through a multi‐centre TS structure. Valuable insights into the catalytic structure–activity relationships are unveiled by a detailed comparison of [{N^N}Ae(NHR)] catalysts. Moreover, the intriguingly opposite trends in reactivity observed in intramolecular (Ca>Sr>Ba) and intermolecular (Ca<Sr<Ba) HA catalysis for the studied family of iminoanilide alkaline‐earth amido catalysts are rationalised.     

Synthesis and Insertion Chemistry of Mixed Tether Uranium Metallocene Complexes

The synthesis of mixed tethered alkyl uranium metallocenes has been investigated by examining the reactivity of the bis(tethered alkyl) metallocene [(η⁵‐C₅Me₄SiMe₂CH₂‐κC)₂U] ( 1 ) with substrates that react with only one of the U? C linkages. The effect of these mixed tether coordination environments on the reactivity of the remaining U? C bond has been studied by using CO insertion chemistry. One equivalent of azidoadamantane (AdN₃) reacts with 1 to yield the mixed tethered alkyl triazenido complex [(η⁵‐C₅Me₄SiMe₂CH₂‐κC)U(η⁵‐C₅Me₄SiMe₂‐CH₂NNN‐Ad‐κ²N^1,3)]. Similarly, a single equivalent of CS₂ reacts with 1 to form the mixed tethered alkyl dithiocarboxylate complex [(η⁵‐C₅Me₄SiMe₂CH₂‐κC)U(η⁵‐C₅Me₄SiMe₂‐ CH₂C(S)₂‐κ²S,S′)], a reaction that constitutes the first example of CS₂ insertion into a U⁴⁺? C bond. Complex 1 reacts with one equivalent of pyridine N‐oxide by C? H bond activation of the pyridine ring to form a mixed tethered alkyl cyclometalated pyridine N‐oxide complex [(η⁵‐C₅Me₄SiMe₂CH₂‐κC)(η⁵‐C₅Me₄SiMe₃)U(C₆H₄NO‐κ²C,O)]. The remaining (η⁵‐C₅Me₄SiMe₂CH₂‐κC)^2? ligand in each of these mixed tethered species show reactivity towards CO and tethered enolate ligands form by insertion. Subsequent rearrangement have been identified in [(η⁵‐C₅Me₄SiMe₃)U(C₅H₄NO‐κ²C,O)(η⁵‐C₅Me₄SiMe₂C(?CH₂)O‐κO)] and [(η⁵‐C₅Me₄SiMe₂CH₂NNN‐Ad‐κ²N^1,3)U(η⁵‐C₅Me₄SiMe₂C(?CH₂)O‐κO)].     

Adduct Formation,B−H Activation and Ring Expansion at Room Temperature from Reactions of HBcat with NHCs

We report the reactions of catecholborane (HBcat; 1 ) with unsaturated and saturated NHCs as well as CAAC^Me. Mono‐NHC adducts of the type HBcat?NHC (NHC=nPr₂Im, iPr₂Im, iPr₂Im^Me, and Dipp₂Im) were obtained by stoichiometric reactions of HBcat with the unsaturated NHCs. The reaction of CAAC^Me with HBcat yielded the B?H activated product CAAC^Me(H)Bcat via insertion of the carbine‐carbon atom into the B?H bond. The saturated NHC Dipp₂SIm reacted in a 2:2 ratio yielding an NHC ring‐expanded product at room temperature forming a six‐membered ?B?C=N?C=C?N? ring via C?N bond cleavage and further migration of the hydrides from two HBcat molecules to the former carbene‐carbon atom.     

Darstellung,Eigenschaften und Molekülstrukturen von Dimethylmetallalkoxiden und ‐amiden des Aluminiums und Galliums

Preparation, Properties, and Molecular Structures of Dimethylmetal Alkoxides and Amides of Aluminium and Gallium Dimethylaluminium‐ ( 1 ) and Dimethylgallium‐o‐methoxyphenyl‐1‐ethoxide ( 2 ) were obtained by reaction of Me₃Al and Me₃Ga respectively with o‐Methoxyphenyl‐1‐ethanol in n‐pentane. Dimethylaluminium‐ ( 3 ) and dimethylgallium‐o‐methoxyphenyl‐2‐ethylamide ( 4 ) were prepared by treatment of Me₂AlCl and Me₂GaCl respectively with Lithium‐o‐methoxyphenyl‐2‐ethylamide. Trimethylgallium‐o‐methoxyphenylmethylamine‐Adduct ( 5 ) was isolated using reaction of Me₃Ga with the corresponding amine. The compounds were characterised by ¹H‐, ¹³C‐, and ²⁷Al n.m.r. spectroscopy. The molecular structures of 2 and 5 were determined by X‐ray diffraction. Compounds 1 – 4 form brigded dimeric molecules. The bond distances of the central Ga₂O₂ ring in 2 correspond to those of compounds of similar structure.     

Structural Analysis of Zincocenes with Substituted Cyclopentadienyl Rings

New zincocenes [ZnCp′₂] ( 2 – 5 ) with substituted cyclopentadienyl ligands C₅Me₄H, C₅Me₄tBu, C₅Me₄SiMe₂tBu and C₅Me₄SiMe₃, respectively, have been prepared by the reaction of ZnCl₂ with the appropriate Cp′‐transfer reagent. For a comparative structural study, the known [Zn(C₅H₄SiMe₃)₂] ( 1 ), has also been investigated, along with the mixed‐ring zincocenes [Zn(C₅Me₅)(C₅Me₄SiMe₃)] ( 6 ) and [Zn(C₅Me₅)(C₅H₄SiMe₃)] ( 7 ), the last two obtained by conproportionation of [Zn(C₅Me₅)₂] with 5 or 1 , as appropriate. All new compounds were characterised by NMR spectroscopy, and by X‐ray methods, with the exception of 7 , which yields a side‐product ( C ) upon attempted crystallisation. Compounds 5 and 6 were also investigated by ¹³C CPMAS NMR spectroscopy. Zincocenes 1 and 2 have infinite chain structures with bridging Cp′ ligands, while 3 and 4 exhibit slipped‐sandwich geometries. Compounds 5 and 6 have rigid, η⁵/η¹(σ) structures, in which the monohapto C₅Me₄SiMe₃ ligand is bound to zinc through the silyl‐bearing carbon atom, forming a Zn? C bond of comparable strength to the Zn? Me bond in ZnMe₂. Zincocene 5 has dynamic behaviour in solution, but a rigid η⁵/η¹(σ) structure in the solid state, as revealed by ¹³C CPMAS NMR studies, whereas for 6 the different nature of the Cp′ ligands and of the ring substituents of the η¹‐Cp′ group (Me and SiMe₃) have permitted observation for the first time of the rigid η⁵/η¹ solution structure. Iminoacyl compounds of composition [Zn(η⁵‐C₅Me₄R)(η¹‐C(NXyl)C₅Me₄R)] resulting from the reactions of some of the above zincocenes and CNXyl (Xyl=2,6‐dimethylphenylisocyanide) have also been obtained and characterised.     

Catalytic Water Splitting with an Iridium Carbene Complex: A Theoretical Study

Catalytic water oxidation at Ir (OH)⁺ ( Ir =IrCp*(Me₂NHC), where Cp*=pentamethylcyclopentadienyl and Me₂NHC=N,N′‐dimethylimidazolin‐2‐ylidene) can occur through various competing channels. A potential‐energy surface showing these various multichannel reaction pathways provides a picture of how their importance can be influenced by changes in the oxidant potential. In the most favourable calculated mechanism, water oxidation occurs via a pathway that includes four sequential oxidation steps, prior to formation of the O?O bond. The first three oxidation steps are exothermic upon treatment with cerium ammonium nitrate and lead to formation of Ir ^V(?O)(O ^. )⁺, which is calculated to be the most stabile species under these conditions, whereas the fourth oxidation step is the potential‐energy‐determining step. O?O bond formation takes place by coupling of the two oxo ligands along a direct pathway in the rate‐limiting step. Dissociation of dioxygen occurs in two sequential steps, regenerating the starting material Ir (OH)⁺. The calculated mechanism fits well with the experimentally observed rate law: v=k_obs[ Ir ][oxidant]. The calculated effective barrier of 24.6 kcal mol^?1 fits well with the observed turnover frequency of 0.88 s^?1. Under strongly oxidative conditions, O?O bond formation after four sequential oxidation steps is the preferred pathway, whereas under milder conditions O?O bond formation after three sequential oxidation steps becomes competitive.     

Stabilization of a Silaaldehyde by its η2 Coordination to Tungsten

Treatment of pyridine‐stabilized silylene complexes [(η⁵‐C₅Me₄R)(CO)₂(H)W?SiH(py)(Tsi)] (R=Me, Et; py=pyridine; Tsi=C(SiMe₃)₃) with an N‐heterocyclic carbene ^MeIⁱPr (1,3‐diisopropyl‐4,5‐dimethylimidazol‐2‐ylidene) caused deprotonation to afford anionic silylene complexes [(η⁵‐C₅Me₄R)(CO)₂W?SiH(Tsi)][H^MeIⁱPr] (R=Me ( 1‐Me ); R=Et ( 1‐Et )). Subsequent oxidation of 1‐Me and 1‐Et with pyridine‐N‐oxide (1 equiv) gave anionic η²‐silaaldehydetungsten complexes [(η⁵‐C₅Me₄R)(CO)₂W{η²‐O?SiH(Tsi)}][H^MeIⁱPr] (R=Me ( 2‐Me ); R=Et ( 2‐Et )). The formation of an unprecedented W‐Si‐O three‐membered ring was confirmed by X‐ray crystal structure analysis.     

Me3Si−SiMe2[oCON(iPr)2−C6H4]: An Unsymmetrical Disilane Reagent for Regio‐ and Stereoselective Bis‐Silylation of Alkynes

The air‐stable unsymmetrical disilane Me₃Si?SiMe₂[oCON(iPr)₂C₆H₄] has been developed for bis‐silylation of alkynes. This reagent tolerates a range of functional groups, providing Z‐vinyl disilanes in high yields. It is proposed that the phenyl‐ring‐tethered amide group directs oxidative addition of Pd⁰ into the Si?Si bond, which might facilitate formation of a six‐membered Pd cycle, generating products with good to excellent regioselectivity.     

Rare‐Earth‐Metal Alkylaluminates Supported by N‐Donor‐Functionalized Cyclopentadienyl Ligands: C?H Bond Activation and Performance in Isoprene Polymerization

Homoleptic tetramethylaluminate complexes [Ln(AlMe₄)₃] (Ln=La, Nd, Y) reacted with HCp^NMe2 (Cp^NMe2=1‐[2‐(N,N‐dimethylamino)‐ethyl]‐2,3,4,5‐tetramethyl‐cyclopentadienyl) in pentane at ?35 °C to yield half‐sandwich rare‐earth‐metal complexes, [{C₅Me₄CH₂CH₂NMe₂(AlMe₃)}Ln(AlMe₄)₂]. Removal of the N‐donor‐coordinated trimethylaluminum group through donor displacement by using an equimolar amount of Et₂O at ambient temperature only generated the methylene‐bridged complexes [{C₅Me₄CH₂CH₂NMe(μ‐CH₂)AlMe₃}Ln(AlMe₄)] with the larger rare‐earth‐metal ions lanthanum and neodymium. X‐ray diffraction analysis revealed the formation of isostructural complexes and the C? H bond activation of one aminomethyl group. The formation of Ln(μ‐CH₂)Al moieties was further corroborated by ¹³C and ¹H‐¹³C HSQC NMR spectroscopy. In the case of the largest metal center, lanthanum, this C? H bond activation could be suppressed at ?35 °C, thereby leading to the isolation of [(Cp^NMe2)La(AlMe₄)₂], which contains an intramolecularly coordinated amino group. The protonolysis reaction of [Ln(AlMe₄)₃] (Ln=La, Nd) with the anilinyl‐substituted cyclopentadiene HCp^AMe2 (Cp^AMe2=1‐[1‐(N,N‐dimethylanilinyl)]‐2,3,4,5‐tetramethylcyclopentadienyl) at ?35 °C generated the half‐sandwich complexes [(Cp^AMe2)Ln(AlMe₄)₂]. Heating these complexes at 75 °C resulted in the C? H bond activation of one of the anilinium methyl groups and the formation of [{C₅Me₄C₆H₄NMe(μ‐CH₂)AlMe₃}Ln(AlMe₄)] through the elimination of methane. In contrast, the smaller yttrium metal center already gave the aminomethyl‐activated complex at ?35 °C, which is isostructural to those of lanthanum and neodymium. The performance of complexes [{C₅Me₄CH₂CH₂NMe(μ‐CH₂)AlMe₃}‐ Ln(AlMe₄)], [(Cp^AMe2)Ln(AlMe₄)₂], and [{C₅Me₄C₆H₄NMe(μ‐CH₂)AlMe₃}Ln(AlMe₄)] in the polymerization of isoprene was investigated upon activation with [Ph₃C][B(C₆F₅)₄], [PhNMe₂H][B(C₆F₅)₄], and B(C₆F₅)₃. The highest stereoselectivities were observed with the lanthanum‐based pre‐catalysts, thereby producing polyisoprene with trans‐1,4 contents of up to 95.6 %. Narrow molecular‐weight distributions (M_w/M_n<1.1) and complete consumption of the monomer suggested a living‐polymerization mechanism.     

Destruktive Komplexierung des dimeren Diorganylzinn(IV)‐hydroxids [Me2Sn(A)(μ‐OH)]2 (HA = Benzol‐1,2‐disulfonsäureimid): Bildung und Strukturen der Einkernkomplexe [Me2Sn(A)2(OPPh3)2] und [Me2Sn(phen)2]2⊕ · 2 A⊖ · MeCN

Polysulfonylamines. CXVI. Destructive Complexation of the Dimeric Diorganyltin(IV) Hydroxide [Me₂Sn(A)(μ‐OH)]₂ (HA = Benzene‐1,2‐disulfonimide): Formation and Structures of the Mononuclear Complexes [Me₂Sn(A)₂(OPPh₃)₂] and [Me₂Sn(phen)₂]^2⊕ · 2 A^⊖ · MeCN Destructive complexation of the dimeric hydroxide [Me₂Sn(A)(μ‐OH)]₂, where A^⊖ is deprotonated benzene‐1,2‐disulfonimide, with two equivalents of triphenylphosphine oxide or 1,10‐phenanthroline in hot MeCN produced, along with Me₂SnO and water, the novel coordination compounds [Me₂Sn(A)₂(OPPh₃)₂] ( 3 , triclinic, space group P 1) and [Me₂Sn(phen)₂]^2⊕ · 2 A^⊖ · MeCN ( 4 , monoclinic, P2₁/c). In the uncharged all‐trans octahedral complex 3 , the heteroligands are unidentally O‐bonded to the tin atom, which resides on a crystallographic centre of inversion [Sn–O(S) 227.4(2), Sn–O(P) 219.6(2) pm, cis‐angles in the range 87–93°; anionic ligand partially disordered over two equally populated sites for N, two S and non‐coordinating O atoms]. The cation occurring in the crystal of 4 has a severely distorted cis‐octahedral C₂N₄ coordination geometry around tin and represents the first authenticated example of a dicationic tin(IV) dichelate [R₂Sn(L–L′)₂]^2⊕ to adopt a cis‐structure [C–Sn–C 108.44(11)°]. The five‐membered chelate rings are nearly planar, with similar bite angles of the bidentate ligands, but unsymmetric Sn–N bond lengths, each of the longer bonds being trans to a methyl group [ring 1: N–Sn–N 71.24(7)°, Sn–N 226.81(19) and 237.5(2) pm; ring 2: 71.63(7)°, 228.0(2) and 232.20(19) pm]. In both structures, the bicyclic and effectively C_S symmetric A^⊖ ions have their five‐membered rings distorted into an envelope conformation, with N atoms displaced by 28–43 pm from the corresponding C₆S₂ mean plane.     

Olefin polymerization and copolymerization with soluble transition‐metal complex catalysts

Olefin polymerizations catalyzed by Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 1 – 5 ; Cp′ = cyclopentadienyl group), RuCl₂(ethylene)(pybox) { 7 ; pybox = 2,6‐bis[(4S)‐4‐isopropyl‐2‐oxazolin‐2‐yl]pyridine}, and FeCl₂(pybox) ( 8 ) were investigated in the presence of a cocatalyst. The Cp*TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 5 )–methylaluminoxane (MAO) catalyst exhibited remarkable catalytic activity for both ethylene and 1‐hexene polymerizations, and the effect of the substituents on the cyclopentadienyl group was an important factor for the catalytic activity. A high level of 1‐hexene incorporation and a lower r_E · r_H value with 5 than with [Me₂Si(C₅Me₄)(N^tBu)]TiCl₂ ( 6 ) were obtained, despite the rather wide bond angle of Cp Ti O (120.5°) of 5 compared with the bond angle of Cp Ti N of 6 (107.6°). The 7 –MAO catalyst exhibited moderate catalytic activity for ethylene homopolymerization and ethylene/1‐hexene copolymerization, and the resultant copolymer incorporated 1‐hexene. The 8 –MAO catalyst also exhibited activity for ethylene polymerization, and an attempted ethylene/1‐hexene copolymerization gave linear polyethylene. The efficient polymerization of a norbornene macromonomer bearing a ring‐opened poly(norbornene) substituent was accomplished by ringopening metathesis polymerization with the well‐defined Mo(CHCMe₂Ph)(N‐2,6‐ⁱPr₂C₆H₃)[OCMe(CF₃)₂]₂ ( 10 ). The key step for the macromonomer synthesis was the exclusive end‐capping of the ring‐opened poly(norbornene) with p‐Me₃SiOC₆H₄CHO, and the use of 10 was effective for this polymerization proceeding with complete conversion. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4613–4626, 2000     

Palladium‐catalyzed unstrained C(sp3)―N bond activation: the synthesis of N,N‐dimethylacetamide by carbonylation of trimethylamine

This work describes a highly efficient unstrained C(sp³)―N bond activation approach for synthesis of N,N‐dimethylacetamide (DMAc) via catalytic carbonylation of trimethylamine using a PdCl₂/bipy (bipy = 2,2′‐bipyridine)/Me₄NI catalyst system. A low Pd catalyst dosage (1.0 mol%) is sufficient for high selectivity (98.1%) and yield (90.8%), with a turnover number (TON) of 90.0 mmol of DMAc obtained per mmol of PdCl₂ employed under mild reaction conditions. The influence of reaction parameters such as catalyst precursor dosage, ligand type and promoter on activity is investigated. This work also discusses in detail the halide promoter's role in the reaction, and provides a plausible mechanism based on the intermediates methyl iodide and acetyl iodide. Analyses indicate that the carbonylation of trimethylamine may proceed through an active intermediate acetyl iodide formed by carbonylation of methyl iodide generated from the decomposition of the promoter Me₄NI under reaction conditions. The formation of acetyl iodide favors the cleaving efficiency of the inert unstrained C(sp³)―N bond of trimethylamine. Copyright © 2013 John Wiley & Sons, Ltd.     

Aromatic Hydroxylation at a Non‐Heme Iron Center: Observed Intermediates and Insights into the Nature of the Active Species

Mechanism of substrate oxidations with hydrogen peroxide in the presence of a highly reactive, biomimetic, iron aminopyridine complex, [Fe^II(bpmen)(CH₃CN)₂][ClO₄]₂ ( 1 ; bpmen=N,N'‐dimethyl‐N,N'‐bis(2‐pyridylmethyl)ethane‐1,2‐diamine), is elucidated. Complex 1 has been shown to be an excellent catalyst for epoxidation and functional‐group‐directed aromatic hydroxylation using H₂O₂, although its mechanism of action remains largely unknown. 1 , 2 Efficient intermolecular hydroxylation of unfunctionalized benzene and substituted benzenes with H₂O₂ in the presence of 1 is found in the present work. Detailed mechanistic studies of the formation of iron(III)–phenolate products are reported. We have identified, generated in high yield, and experimentally characterized the key Fe^III(OOH) intermediate (λ_max=560 nm, rhombic EPR signal with g=2.21, 2.14, 1.96) formed by 1 and H₂O₂. Stopped‐flow kinetic studies showed that Fe^III(OOH) does not directly hydroxylate the aromatic rings, but undergoes rate‐limiting self‐decomposition producing transient reactive oxidant. The formation of the reactive species is facilitated by acid‐assisted cleavage of the O? O bond in the iron–hydroperoxide intermediate. Acid‐assisted benzene hydroxylation with 1 and a mechanistic probe, 2‐Methyl‐1‐phenyl‐2‐propyl hydroperoxide (MPPH), correlates with O? O bond heterolysis. Independently generated Fe^IV?O species, which may originate from O? O bond homolysis in Fe^III(OOH), proved to be inactive toward aromatic substrates. The reactive oxidant derived from 1 exchanges its oxygen atom with water and electrophilically attacks the aromatic ring (giving rise to an inverse H/D kinetic isotope effect of 0.8). These results have revealed a detailed experimental mechanistic picture of the oxidation reactions catalyzed by 1 , based on direct characterization of the intermediates and products, and kinetic analysis of the individual reaction steps. Our detailed understanding of the mechanism of this reaction revealed both similarities and differences between synthetic and enzymatic aromatic hydroxylation reactions.     

C?H Bond Activation/Borylation of Furans and Thiophenes Catalyzed by a Half‐Sandwich Iron N‐Heterocyclic Carbene Complex

A coordinatively unsaturated iron‐methyl complex having an N‐heterocyclic carbene ligand, [Cp*Fe(L^Me)Me] ( 1 ; Cp*=η⁵‐C₅Me₅, L^Me=1,3,4,5‐tetramethyl‐imidazol‐2‐ylidene), is synthesized from the reaction of [Cp*Fe(TMEDA)Cl] (TMEDA=N,N,N′,N′‐tetramethylethylenediamine) with methyllithium and L^Me. Complex 1 is found to activate the C? H bonds of furan, thiophene, and benzene, giving rise to aryl complexes, [Cp*Fe(L^Me)(aryl)] (aryl=2‐furyl ( 2 ), 2‐thienyl ( 3 ), phenyl ( 4 )). The C? H bond cleavage reactions are applied to the dehydrogenative coupling of furans or thiophenes with pinacolborane (HBpin) in the presence of tert‐butylethylene and a catalytic amount of 1 (10 mol % to HBpin). The borylation of the furan/thiophene or 2‐substituted furans/thiophenes occurs exclusively at the 2‐ or 5‐positions, respectively, whereas that of 3‐substituted furans/thiophenes takes place mainly at the 5‐position and gives a mixture of regioisomers. Treatment of 2 with 2 equiv of HBpin results in the quantitative formation of 2‐boryl‐furan and the borohydride complex [Cp*Fe(L^Me)(H₂Bpin)] ( 5 ). Heating a solution of 5 in the presence of tert‐butylethylene led to the formation of an alkyl complex [Cp*Fe(L^Me)CH₂CH₂tBu] ( 6 ), which was found to cleave the C? H bond of furan to produce 2 . On the basis of these results, a possible catalytic cycle is proposed.     

Cleavage of the Fe—Fe Bond of （Me2SiSiMe2） [η^5－C5H4Fe（CO）2]2 with Na／Hg and Molecular Structure of the Ring－Opened Complex

The reaction of the rifle cyclic complex (1) with sodium amalgam in THF resulted in the expected cleavage of the Fe-Fe bond to afford his-sodium salt ( Me2SiSiMe2 ) [η^5-C5H4Fe(CO)2]2 (4). The latter was not isolated and was used directly to react with MeI, PhCH2Cl, CH3C(O)Cl, PhC(O)Cl,Cy3SnCl (Cy= cyclohexyl) or Ph3SnCl to afford corresponding ring-opened derivatives (Me2SiSiMe2) [η^5-C5H4Fe(CO)2]2 [5, R=Me; 6, R=PhCH2; 7, R=CH3C(O); 8, R=PhC(O); 9, R = Cy3Sn or 10, R = Ph3Sn ]. The crystal and molecular structures of 10 were determined by X-ray diffraction analysis. The molecule took the desired ant/ conformation around the Si-Si bond. The length of the Si--Si bond is 0.2343(3)nm, which is essentially identical to that in the cyclic structure of 1[0.2346(4) tun]. This result unambiguously demonstrates that the Si--Si bond in the cyclic structure of 1 is not subject to obvious strain.     

Gold Catalysis: Catalyst Oxidation State Dependent Dichotomy in the Cyclization of Furan–Yne Systems with Aromatic Tethers

Four different synthetic strategies led to a variety of furan–yne systems that contained an aryl system in the tether. Due to the short routes to these systems (four steps or less), a small library of substrates could easily be prepared. These were treated with AuCl₃ or with the Gagosz’s catalyst Ph₃PAuNTf₂ complex. The AuCl₃‐catalyzed reactions delivered highly substituted fluorene derivatives, a class of compounds of great importance as precursors for luminophores with extraordinary abilities. Conversely, a different mechanistic pathway was observed with the cationic gold(I) catalyst. In the latter case, a mechanistically interesting reaction cascade initiated a formal alkyne insertion into the furyl‐sp³‐C bond, which gave indene derivatives as the final products. This new reaction pathway depends on the aromatic moiety in the tether, which stabilizes a crucial cationic intermediate as a benzylic cation.     

Discrete Magnesium Hydride Aggregates: A Cationic Mg13H18 Cluster Stabilized by NNNN‐Type Macrocycles

Large magnesium hydride aggregates [Mg₁₃(Me₃TACD)₆(μ₂‐H₁₂)(μ₃‐H₆)][A]₂ ((Me₃TACD)H=1,4,7‐trimethyl‐1,4,7,10‐tetraazacyclododecane; A=AlEt₄, AlnBu₄, B{3,5‐(CF₃)₂C₆H₃}₄) were synthesized stepwise from alkyl complexes [Mg₂(Me₃TACD)R₃] (R=Et, nBu) and phenylsilane in the presence of additional Mg^II ions. The central magnesium atom is octahedrally coordinated by six hydrides as in solid α‐MgH₂ of the rutile type. Further coordination to six magnesium atoms leads to a substructure of seven edge‐sharing octahedra as found in the hexagonal layer of brucite (Mg(OH)₂). Upon protonolysis in the presence of 1,2‐dimethoxyethane (DME), this cluster was degraded into a tetranuclear dication [Mg₂(Me₃TACD)(μ‐H)₂(DME)]₂[A]₂.     

Facile Synthesis and Versatile Reactivity of an Unusual Cyclometalated Rhodium(I) Pincer Complex

The synthesis of the reactive PN(C^H) ligand 2‐di(tert‐butylphosphanomethyl)‐6‐phenylpyridine ( 1^H ) and its versatile coordination to a Rh^I center is described. Facile C?H activation occurs in the presence of a (internal) base, thus resulting in the new cyclometalated complex [Rh^I(CO)(κ³‐P,N,C‐ 1 )] ( 3 ), which has been structurally characterized. The resulting tridentate ligand framework was experimentally and computationally shown to display dual‐site proton‐responsive reactivity, including reversible cyclometalation. This feature was probed by selective H/D exchange with [D₁]formic acid. The addition of HBF₄ to 3 leads to rapid net protonolysis of the Rh?C bond to produce [Rh^I(CO)(κ³‐P,N,(C?H)‐ 1 )] ( 4 ). This species features a rare aryl C?H agostic interaction in the solid state, as shown by X‐ray diffraction studies. The nature of this interaction was also studied computationally. Reaction of 3 with methyl iodide results in rapid and selective ortho‐methylation of the phenyl ring, thus generating [Rh^I(CO)(κ²‐P,N‐ 1^Me )] ( 5 ). Variable‐temperature NMR spectroscopy indicates the involvement of a Rh^III intermediate through formal oxidative addition to give trans‐[Rh^III(CH₃)(CO)(I)(κ³‐P,N,C‐ 1 )] prior to C?C reductive elimination. The Rh^III–trans‐diiodide complex [Rh^I(CO)(I)₂(κ³‐P,N,C‐ 1 )] ( 6 ) has been structurally characterized as a model compound for this elusive intermediate.