Chemically modified polymeric sorbents for sample preconcentration

Solid-phase extraction is an attractive alternative in sample preparation because it overcomes many drawbacks of liquid-liquid extraction and makes on-line determination possible by hyphenation with chromatographic techniques. Driven by the need for more effective and more selective sorbents, advances in solid-phase extraction include the development of new materials. This paper describes different types of chemically modified sorbents for the solid-phase extraction of compounds from aqueous samples. Chemical introduction of different functional groups into a polymeric resin improves the efficiency of solid-phase extraction by providing better surface contact with the aqueous samples; also, these sorbents have a greater capacity than the typical solid-phase materials for polar compounds have. The most important new sorbents are the chemically modified resins based on styrene-divinylbenzene copolymers. Preparation of these new sorbents is described, and advantages and drawbacks of off-line procedures and on-line procedures are also discussed. Applications for off-line and on-line chromatographic determinations of polar compounds are presented.     

Miniaturized solid-phase extraction as a sample preparation technique for the determination of phthalates in water

Miniaturized solid-phase extraction (SPE) has been developed and successfully employed for the determination of organic species in water samples by liquid chromatography (LC). The method is based on the concept of a microscale extraction technique using a fused-silica capillary column for gas chromatography (GC), so-called in-tube solid-phase microextraction (SPME). The extraction conditions, such as the extraction time and flow-rate for the extraction and desorption process, were investigated as well as the effect of the internal structure of the extraction capillary on the efficiency. By inserting a stainless steel wire into the extraction capillary to reduce the internal volume of the capillary with the same surface area of the coating, an improved extraction and pre-concentration effects were obtained. Further pre-concentration was accomplished by the extraction device with a novel fiber-in-tube configuration. The direct coupling of the extraction method with a LC system has made it possible to determine low levels of phthalates in water samples without high consumption of organic solvents. The system developed must have potential applications for the analysis of environmental and biological samples in aqueous sample matrices.     

The use of the PREP system for handling of body fluids

The Du Pont PREP automated sample processor is a centrifugally based, microprocessor controlled instrument that was designed for extraction of samples from biological fluids. Extraction takes place in cartridges containing either organic resins or bonded silica packings as extraction sorbants. This paper will discuss the application of several lipophilic and ion exchange sorbants to the extraction of biological samples from body fluids. The advantages of these different types of sorbants will be compared and their performance with automated sample preparation will be shown. A variety of applications including the extraction of benzodiazepine, barbiturate, aminoglycoside and anticonvulsant drugs and their metabolites from serum, urine, and tissue homogenates will be discussed.     

Extraction of alkyl methylphosphonic acids from aqueous samples using a conventional polymeric solid-phase extraction sorbent and a molecularly imprinted polymer

The analysis of alkyl methylphosphonic acids (AMPAs) constitutes an important subject for verifying the compliance to the Chemical Weapons Convention (CWC). Indeed, alkyl methylphosphonic acids are the degradation products of V and G nerve agents such as VX, sarin or soman. Lowering the limits of detection of analytical methods for complex aqueous matrices implies the introduction of concentration and clean-up steps in the whole analytical process. Therefore a molecular imprinted polymer (MIP) has been previously developed for the selective extraction and the concentration of the alkyl methylphosphonic acids. Unfortunately, the selective retention process on this MIP has involved the development of hydrogen bonds and so does not allow the direct percolation of aqueous samples. A change of solvent is then necessary and can be performed using solid-phase extraction (SPE) with conventional non selective hydrophobic sorbents. Two polymeric sorbents, Oasis HLB and HR-P resins, were selected for their high specific surface area. The extraction recoveries obtained on both sorbents were compared and the Oasis HLB sorbent was further selected and used for the percolation of acidified aqueous samples. An optimised SPE procedure was then applied to concentrate an aqueous soil extract spiked with isobutyl methylphosphonic acid (iBMPA) and cyclopentyl methylphosphonic acid (cPMPA) that was further cleaned-up by passing through the MIP. The resulting LC-MS full scan chromatograms highlight the clean-up effect of the SPE-MIP association by the removal of the matrix substances and the preservation of 95% of the compounds of interest.     

Solid ink-printed filter paper as a green adsorbent material for the solid-phase extraction of UV filters from water samples

This work describes the development of a new green solid-phase extraction approach, which is based on the use of low-cost extraction discs composed of plain filter papers that are covered with a synthetic wax-like coating. The filter papers are printed in a commercial solid ink printer, which dispenses a synthetic wax-like ink on the surface of the paper, to cover the hydrophilic cellulose fibre matrix with an interface of lipophilic domains where non-polar analytes can partition through hydrophobic interactions. The modified paper filters were used to extract hydrophobic organic compounds from water samples following the customary procedure of solid-phase extraction without sorbent preconditioning and needless of high-vacuum sources. As a proof-of-concept application, a series of non-polar organic UV filters were used as model analytes to optimise the extraction parameters and evaluate the performance of the method in spiked water samples. Based on this principle, a new sample preparation platform with low environmental footprint has been developed that enables extraction to be carried out using low-cost, environmental benign and non-toxic conventional materials. The advantages and disadvantages of the method, alongside with its future prospects towards the development of custom-made ‘printed extraction kits’, are envisioned and discussed.     

Suspension ring-opening metathesis polymerization: the preparation of norbornene-based resins for application in organic synthesis

A series of norbornene-based resin beads were obtained by aqueous suspension ring-opening metathesis polymerization (ROMP) and used as polymeric supports for organic synthesis. These resins were prepared from norbornene, norborn-2-ene-5-methanol, and cross-linkers such as bis(norborn-2-ene-5-methoxy)alkanes, di(norborn-2-ene-5-methyl)ether, and 1,3-di(norborn-2-ene-5-methoxy)benzene. The resulting unsaturated ROMP (U-ROMP) resins containing olefin repeat units were chemically modified using hydrogenation, hydrofluorination, chlorination, and bromination reactions to produce saturated ROMP resins with different chemical and physical properties. The hydrogenated ROMP (H-ROMP) resin was found to be highly resistant to acidic, basic, Lewis acid, and Birch reduction conditions and was assessed as a polymeric support in a series of solid-phase synthetic applications. The H-ROMP resin was found to have superior performance compared to polystyrene-divinylbenzene (PS-DVB) copolymers in aromatic nitration and acylation reactions. In a conventional five-step solid-phase synthesis of a hydantoin, similar results were obtained for both the H-ROMP and PS-DVB resins. The U-ROMP resin was also shown to be effective in the solid-phase syntheses of benzimidazoles and benzimidazolones.     

石墨烯应用于样品前处理的研究进展

样品前处理技术在样品分析中发挥着越来越重要的作用,而对分析物的富集能力和对样品基体的净化程度主要取决于高效的样品前处理材料,所以发展高性能的样品前处理材料一直是该领域的前沿研究方向。近年来,各类先进材料已经被引入样品前处理领域,发展了多种高性能的萃取材料。由于独特的物理化学性质,石墨烯已在各个研究领域获得广泛关注,在样品前处理领域也发挥着重要作用。基于高的比表面积、大的π电子结构、优异的吸附性能、丰富的官能团和易于化学改性等优点,石墨烯和氧化石墨烯基萃取材料被成功应用于各种样品的前处理,对不同领域中多种类型分析物表现出优异的萃取性能。该论文总结和讨论了近3年来石墨烯材料(石墨烯、氧化石墨烯及其功能化材料)在柱固相萃取、分散固相萃取、磁性固相萃取、搅拌棒萃取、纤维固相微萃取和管内固相微萃取等方面的研究进展。基于多种萃取机理如π-π、静电、疏水、亲水、氢键等相互作用,石墨烯萃取材料能够高效萃取和选择性富集不同类别的目标分析物,如重金属离子、多环芳烃、塑化剂、雌激素、药物分子、农药残留、兽药残留等。基于新型石墨烯萃取材料的各种样品前处理技术与多种检测技术如色谱、质谱、原子吸收光谱等联用,广泛应用于环境监测、食品安全和生化分析等领域。最后,总结了石墨烯在样品前处理领域中存在的问题,并展望了未来的发展趋势。     

Carboxyl modified multi-walled carbon nanotubes as solid-phase extraction adsorbents combined with high-performance liquid chromatography for analysis of linear alkylbenzene sulfonates

Recently, multi-wall carbon nanotubes (MWCNTs) as adsorbents of solid-phase extraction are attractive because they can be used for enrichment of organic compounds and metal ions at trace levels. In this study, we use the carboxyl modified multi-wall carbon nanotubes (CMMWCNTs) as adsorbents of solid-phase extraction for extraction of linear alkylbenzene sulfonates (LAS), which are widely used anion surfactant with different homologues, and detected by HPLC-UV. The effect of eluent and its volume, sample pH and flow rate, sample volume and the ultrasonic time of sample, the content of the electrolyte (NaCl) were investigated and optimized. The detection limit for LAS homologues was 0.02-0.03 μg L⁻¹ with R.S.D. (n = 6) ranging from 2.04 to 10.03%. The recoveries of LAS homologues in the spiked environmental water samples ranged from 84.8 to 106.1%. The proposed method has been applied successfully to the analysis of LAS in aqueous environmental samples, which demonstrates that CMMWCNTs-based solid-phase extraction is a precision and convenient enrichment method and can be used for analysis of LAS homologues in water samples.     

The Use of the PREPTM System for Handling of Body Fluids

Abstract

The Du Pont PREP^TM automated sample processor is a centrifugally based, microprocessor controlled instrument that was designed for extraction of samples from biological fluids. Extraction takes place in cartridges containing either organic resins or bonded silica packings as extraction sorbants. This paper will discuss the application of several lipophilic and ion exchange sorbants to the extraction of biological samples from body fluids. The advantages of these different types of sorbants will be compared and their performance with automated sample preparation will be shown. A variety of applications including the extraction of benzodiazepine, barbiturate, aminoglycoside and anticonvulsant drugs and their metabolites from serum, urine, and tissue homogenates will be discussed.     

Solid phase microextraction using fused silica fibers coated with graphitized carbon black

Summary This paper presents the results obtained using fused-silica fibers coated with graphitized carbon black (Carbograph-Alltech) for solid-phase microextraction (SPME). The extraction and calibration curves relative to organic micro-pollutants present in gaseous and aqueous samples are reported. Examples of applications of this extraction procedure to GC and GC-MS analysis of organic micro-pollutants in actual samples are also reported.     

Solid-phase microextraction for qualitative and quantitative determination of migrated degradation products of antioxidants in an organic aqueous solution

Low molecular weight aromatic substances may migrate out from plastic packaging to their contents, especially if they consist of organic aqueous solutions or oils. It is, therefore, extremely important to be able to identify and quantify any migrated substances in such solutions, even at very low concentrations. We have in this work investigated and evaluated the use of solid-phase microextraction for the specific task of extraction from an organic aqueous solution such as a simulated pharmaceutical solution consisting of 10 vol.% ethanol in water. The goal was furthermore to investigate the possibility of simultaneously identifying and quantifying the substances in spite of differences in their chemical structures. Methods were developed and evaluated for extraction both with direct sampling and with headspace sampling. Difficulties appeared due to the ethanol in the solution and the minute amounts of substances present. We have shown that a simultaneous quantification of migrated low molecular weight degradation products of antioxidants using only one fibre is possible if the extraction method and temperature are adjusted in relation to the concentration levels of the analytes. Comparions were made with solid-phase extraction.     

树脂对化工废水中有毒有机化合物的吸附作用机理与技术研究

超高交联吸附树脂对多种芳香有机化合物较高的吸附容量主要源于其密集的微孔和双峰孔分布.对大孔吸附树脂及超高交联吸附树脂采用不同极性功能基团进行化学修饰可以制得系列离子交换与吸附双重功能吸附树脂,该类树脂对亲水性有机污染物同时具有疏水、静电、络合等多重作用.丙烯酸酯类吸附树脂在吸附芳香磺酸盐时,树脂的骨架和功能基团对吸附过程都有重要的贡献.     

Selective sample treatment using molecularly imprinted polymers

The molecularly imprinted polymers (MIPs) are synthetic polymers possessing specific cavities designed for a target molecule. By a mechanism of molecular recognition, the MIPs are used as selective sorbents for the solid-phase extraction of target analytes from complex matrices. MIPs are often called synthetic antibodies in comparison with immuno-based sorbents; they offer some advantages including easy, cheap and rapid preparation and high thermal and chemical stability. This review describes the use of MIPs in solid-phase extraction with emphasis on their synthesis, the various parameters affecting the selectivity of the extraction, their potential to selectively extract analytes from complex aqueous samples or organic extracts, their on-line coupling with LC and their potential in miniaturized devices.     

Functionalized Polymeric Sorbents for Solid-Phase Extraction of Polar Pollutants

This study assesses how the physical characteristics of styrene-divinylbenzene (PS-DVB) resins affect the extent to which they are modified when they are functionalized, and how they affect recoveries in on-line solid-phase extraction (SPE) of some polar phenolic compounds, pesticides, and metabolites from water samples which were analyzed by liquid chromatography and UV detection. For this purpose, three commercial PS-DVB resins with different physical characteristics (Amberchrom GC-161m and two different PLRP-S resins) were chemically modified by placing a hydrophilic group, an o-carboxybenzoyl moiety, on their surface; although the physical characteristics are different, the extent of modification did not vary significantly. The results from the SPE process with each sorbent were related to their physical and chemical properties. The polymers with higher surface area provided better recoveries. Moreover, the recoveries for these analytes were better with the chemically-modified polymers due to the higher polarity of these sorbents. The best recovery values were with the sorbent obtained from the chemical modification of Amberchrom GC-161m, the commercial sorbent with higher surface area. For instance, in the analysis of 50 mL of a sample of 2 μg L^–1, the recovery of phenol was 40% with Amberchrom GC-161m and 65% with the chemically-modified Amberchrom GC-161m.     

衍生多孔碳材料在固相微萃取中的应用研究进展

固相微萃取是一种集采样、萃取、富集和进样于一体的样品前处理技术,其萃取效果与涂层材料密切相关。多孔碳材料具有比表面积大、多孔结构可控、活性位点多和化学稳定性好等优点,广泛应用于电池、超级电容器、催化、吸附和分离等领域,也是一种热门的用作固相微萃取探针的涂层材料。衍生多孔碳材料因种类丰富、可设计性强被广泛研究,研究主要集中在对衍生多孔碳材料的结构优化方面。但是衍生多孔碳材料在固相微萃取中的应用还存在如下问题:(1)共价有机框架衍生多孔碳材料的制备已取得较大进展,但将其应用于固相微萃取领域的研究仍较少;(2)有待进一步明确制备出的衍生多孔碳材料用作固相微萃取涂层表现出优异提取能力的机理;(3)有待进一步深入研究将衍生多孔碳材料用作固相微萃取涂层以实现对不同物理化学性质污染物的广谱高灵敏度分析。文章综述了近3年衍生多孔碳材料在固相微萃取中的应用研究,并展望了未来衍生多孔碳材料在固相微萃取中的研究前景。引用文献共56篇,主要来源于Elsevier。     

Analysis of semi-volatile organic compounds in aqueous samples by microwave-assisted headspace solid-phase microextraction coupled with gas chromatography-electron capture detection

The pretreatment technique of microwave-assisted headspace solid-phase microextraction (MA-HS-SPME) has been developed and studied for the extraction of semi-volatile organic compounds (SVOCs) in aqueous samples prior to chromatographic analysis. The optimum conditions for obtaining extraction efficiency, such as the extraction time, extraction temperature, addition of salts, and the ratio of sample to headspace volume parameters were investigated. Experimental results indicated that the proposed MA-HS-SPME technique attained the best extraction efficiency under the optimized conditions, i.e., irradiation of extraction solution (20mL aqueous sample in 40mL headspace vial with no addition of salt) under 30W microwave power for 30min at 70 degrees C. The detection was linear at 1-250ng/L with correlation coefficient exceeding 0.997. The detection limits obtained were between 0.2-10.7ng/L, repeatability range from 2 to 15%. Real water samples collected from known sites in southern Taiwan were analyzed using the optimized conditions.     

Extraction and preconcentration of 17α-ethynylestradiol as an endocrine-disrupting agent from environmental water samples by a modified magnetic nanosorbent

A rapid, simple and efficient procedure is demonstrated for extraction and determination of an endocrine-disrupting compound, synthetic estrogen, 17α-ethynylestradiol (EE2), in water and wastewater samples via magnetic solid-phase extraction followed by high-performance liquid chromatography coupled with UV detection. The analytical method is based on extraction of EE2 by dispersing magnetic nanoparticles in sample solution for a desired time and then eluting the analytes with an appropriate solvent. The nanoparticles were modified with a hydrophobic material by self-assembling an organosulfur compound (bis-(2,4,4-trimethylpentyl)-dithiophosphinic acid) onto the silver-coated Fe₃O₄ nanoparticles as sorbent. The effects of several parameters, such as amount of sorbent, sample volume, extraction time, ionic strength and desorption conditions, were examined to obtain better efficiency. The optimized methodology exhibited a good linearity between 0.5 and 100 μg L^?1 with a limit of detection (LOD) of 0.3 μg L^?1, and a preconcentration factor of 245 with intra- and inter-day precisions (relative standard deviations) 2.4 and 3.2 %, respectively. The developed method was successfully applied for extraction and determination of EE2 in different real water samples including river water, surface water and influent and effluent of a wastewater treatment plant, and satisfactory results were achieved. The method, which provides a good preconcentration factor, a low LOD and low consumption of the organic solvent, presents a rapid, simple and efficient procedure for determining EE2 in aqueous samples.     

New sample preparation technique for the determination of avoparcin in pressurized hot water extracts from kidney samples

A new approach is presented for the determination of avoparcin in tissue. Complete recovery from spiked swine kidney was achieved with hot water modified with 30% ethanol (v/v). The samples were extracted at 75 degrees C and 50 atm by accelerated solvent extraction. In situ sample clean-up was achieved by using matrix solid-phase dispersion utilizing the acrylic polymer XAD-7 HP, and by adding triethylammonium phosphate (TEAP) to the extraction solvent. The aqueous extracts were concentrated by solid-phase extraction (SPE) on the hydrophilic interaction chromatography (HILIC) material polyhydroxyethyl aspartamide. Complete analyte retention was possible during SPE when the kidney extracts were modified with 70% ethanol. A 200 A, 5 microm HILIC column with UV225 detection was used for the separation of avoparcin. The retention time was less than 15 min with 47% aqueous component in acetonitrile and 15 mM TEAP as eluent. The average recovery of avoparcin from kidney samples was 108%.     

Determination of chlorophenols in soil samples by microwave-assisted extraction coupled to headspace solid-phase microextraction and gas chromatography-electron-capture detection

Microwave-assisted extraction coupled to headspace solid-phase microextraction was studied and applied for one-step in-situ sample preparation prior to analysis of chlorophenols (CPs) in soil samples. The CPs in soil sample were extracted into the aqueous solution and then directly onto the solid-phase microextraction (SPME) fiber in headspace under the aid of microwave irradiation. After being desorbed from SPME fiber in the GC injection port, CPs were analyzed with a GC-electron-capture detection system. Parameters affecting the extraction efficiency such as the extraction solutions, the pH in the slurry, the humic acid content in the soil, the power and the irradiation time of microwave as well as the desorption parameters were investigated. Experimental results indicated that the extraction of a 1.0 g soil sample with a 6-ml aqueous solution (pH 2) and a polyacrylate fiber under the medium-power irradiation (132 W) for 9 min achieved the best extraction efficiency of about 90% recovery and less than 10% RSD. Desorption was optimal at 300 degrees C for 3 min. Detection limits were obtained at around 0.1-2.0 microg/kg levels. The proposed method provided a simple, fast, and organic solvent-free procedure to analyze CPs from soil sample matrix.     

Determination of triazines in soil by microwave-assisted extraction followed by solid-phase microextraction and gas chromatography-mass spectrometry

A method for determining triazine herbicides in soil samples that combines microwave-assisted extraction with solid-phase microextraction is described. Water containing 1% methanol was employed as extractant. The parameters of solid-phase microextraction and microwave-assisted extraction were investigated. In solid-phase microextraction, particular attention was paid to the negative effect of salt on fiber stability. Our experiments showed that this effect could be effectively reduced by simply washing the fiber with deionized water. The selected triazines could be efficiently extracted by the aqueous extractant at 105 degrees C for 3 min, with 80% output of maximum power (1,200 W). The extraction procedure provided good precision (<7%) and recoveries (76.1-87.2%). The limits of detection were in the range 2-4 microg/kg. Compared with conventional liquid extraction, microwave-assisted extraction-solid-phase microextraction was more efficient, accurate and faster, and used a very small amount of organic solvent (only 250 microL methanol). The extraction of aged spiked soil samples indicated that, although the recoveries were lower than those of freshly spiked samples, they were nevertheless satisfactory for the quantitative analysis of real-world samples.