Analyses of trace amounts of dyes with a new enhanced sensitivity FTIR spectroscopic technique: MU-ATR (metal underlayer ATR spectroscopy)

The identification of organic dyes is a challenging task in all the fields such as the forensic and conservation sciences, especially in cases where the amount of sample is extremely small. In this paper we propose a new enhanced FTIR method (MU-ATR metal underlayer ATR spectroscopy), which we believe is the first of its kind, for the analysis of a few ng of dyes. With this method, dyed fiber micro-extracts can be analyzed using a commercial FTIR microscope with a fixed incident angle, obtaining the same separation between the different classes of dyes investigated as we obtained analyzing pure dyes in transmission mode.     

Determination of ethyl carbamate in alcoholic beverages: an interlaboratory study to compare HPLC-FLD with GC-MS methods

An international interlaboratory study on the determination of ethyl carbamate in alcoholic beverages by a new HPLC-FLD and by the official GC-MS methods is presented. The aim of this study was to improve the knowledge about precision and accuracy parameters of the new method and to compare the performance of both HPLC and GC methods. Five different samples representing table wines, fortified wines (red and white), distilled spirits, and wine spirits were available for analysis by each participant. Despite the low number of participants (6), the results obtained by the laboratories using the HPLC-FLD method are comparable to those obtained by GC-MS methods. The present study emphasizes the possibility to use, as routine, a much simpler analytical method than the current reference method by GC-MS for ethyl carbamate determination in alcoholic beverages.     

Fast determination of trace dimethyl fumarate in milk with near infrared spectroscopy following fluidized bed enrichment

Near infrared spectroscopy (NIRS) has been proved to be a powerful analytical tool in different fields. However, because of the low sensitivity in near infrared region, it is a significant challenge to detect trace analytes with normal NIRS technique. A novel enrichment technique called fluidized bed enrichment has been developed recently to improve sensitivity of NIRS which allows a large volume solution to pass through within a short time. In this paper, fluidized bed enrichment method was applied in the determination of trace dimethyl fumarate in milk. Macroporous styrene resin HZ-816 was used as adsorbent material, and 1?L solution of dimethyl fumarate was run to pass through the material for concentration. The milk sample was pretreated to remove interference matters such as protein, fat, and then passed through the material for enrichment; after that, diffuse reflection NIR spectra were measured for the analyte concentrated on the material directly without any elution process. The enrichment and spectral measurement procedures were easy to operate. NIR spectra in 900–1,700?nm were collected for dimethyl fumarate solutions in the concentration range of 0.506–5.060?μg/mL and then used for multivariate calibration with partial least squares (PLS) regression. Spectral pretreatment methods such as multiplicative scatter correction, first derivative, second derivative, and their combinations were carried out to select the optimal PLS model. Root mean square error of cross-validation calculated by leave-one-out cross-validation is 0.430?μg/mL with ten PLS factors. Ten samples in an independent test set were predicted by the model with the mean relative error of 5.33?%. From the results shown in this work, it can be concluded that the NIR technique coupled with on-line enrichment method can be expanded for the determination of trace analytes, and its applications in real liquid samples like milk and juice may also be feasible.     

Application of positive ion chemical ionisation and tandem mass spectrometry combined with gas chromatography to the trace level analysis of ethyl carbamate in bread

A rapid, sensitive and selective method has been developed and validated for the analysis of the contaminant ethyl carbamate (EC) in bread products at the part-per-billion level. The new procedure uses positive ion chemical ionisation (PICI) and tandem mass spectrometry (MS/MS), combined with gas chromatography (GC), on a 'bench-top' triple-quadrupole mass spectrometer. Ammonia was the PICI reagent gas of choice because of its ability to produce abundant [M+H]+ and [M+NH4]+ ions from EC and deuterium-labelled EC (LEC) used as an internal standard. For identification and quantification, selected reaction monitoring (SRM) was used to follow the precursor-to-product ion transitions of m/z 107 --> 90, m/z 107 --> 62 and m/z 90 --> 62 for EC, as well as m/z 112 --> 63 for the LEC internal standard. The limits of detection and quantification were 0.6 and 1.2 microg kg(-1), respectively, and the recovery of the method was 101 +/- 10% at 10 microg kg(-1) and 98 +/- 5% at 100 microg kg(-1). The precision of the method, established under conditions of intermediate reproducibility, did not exceed a relative standard deviation of 7%. The quantitative performance of the new GC/PICI-SRM procedure compared favourably with that of a reference method based on GC/MS and selected ion monitoring (correlation coefficient, r = 0.997). However, the new method had the advantages of reduced sample preparation time, improved sensitivity and unambiguous identification of EC at all concentrations. Application of the new method to the analysis of 50 UK breads showed that levels of EC ranged from 0.6 to 2.3 microg kg(-1) in retail products and from 3.1 to 12.2 microg kg(-1) for breads prepared using domestic breadmaking machines (dry weight basis). Toasting bread in a domestic toaster led to increases of between two- and three-fold in mean EC concentrations.     

Two analyte calibrations from the transient response of a single potentiometric sensor employed with the SIA technique

Simultaneous quantification of Cd²⁺ and Pb²⁺ in solution has been correctly targeted using the kinetic information from a single non-specific potentiometric sensor. Dual quantification was accomplished from the complex information in the transient response of an electrode used in a Sequential Injection Analysis (SIA) system and recorded after step injection of sample. Data was firstly preprocessed with the Discrete Wavelet Transform (DWT) to extract significant features and then fed into an Artificial Neural Network (ANN) for building the calibration model. DWT stage was optimized regarding the wavelet function and decomposition level, while the ANN stage was optimized on its structure. To simultaneously corroborate the effectiveness of the approach, two different potentiometric sensors were used as study case, one using a glass selective to Cd²⁺ and another a PVC membrane selective to Pb²⁺.     

Automated sequential trace enrichment of dialysates and robotics. A technique for the preparation of biological samples prior to high-performance liquid chromatography

The development of the sample preparation process, the automated sequential trace enrichment of dialysates, in association with a cartesian robotic sampler is described. The system has been applied to the total automation of the preparation of biological samples and high-performance liquid chromatographic analysis. Concepts of the technique are reported together with an examination of its application to free and total analyte estimation. Examples of chromatographic separations obtained from the preparation of a variety of different analytes and sample materials are given.     

Determination of trace amounts of a proteolytic enzyme by fia with a stopped-flow and an on-line preconcentration technique

An automated method for the determination of small amounts of proteolytic enzymes has been developed, by combining a stopped-flow and an on-line preconcentration technique, using sorbent extraction. It is based on the hydrolysis of a synthetic chromogenic substrate during the stopped-flow period, yielding p-nitroaniline, which is then preconcentrated on a C-18 column. The p-nitroaniline is then eluted from the column to the spectrophotometer flow cell with methanol. In operation, the substrate solution (500 mul) is injected into 0.1M tris-HCl buffer carrier and merged with the sample stream. The mixed plug is stopped in a waterbath, kept at constant temperature, for reaction. The operation of the manifold, including data acquisition, is controlled by a personal computer. Optimal parameters were 40 degrees , pH 8.3, a substrate concentration of 5 mM and wavelength 400 nm. The detection limit, using a 30 min stopped-flow reaction time, is 0.1 muU protease/ml. The method is intended to be used in combination with portable low volume air samplers for monitoring workplace enzyme dusts in the detergent industry.     

Determination of lead, cadmium and mercury in microwave-digested foodstuffs by RP-HPLC with an on-line enrichment technique.

A new method for the simultaneous determination of lead, cadmium and mercury ions in microwave-digested foodstuffs by reversed-phase high-performance liquid chromatography combined with on-line enrichment technique has been developed. The foodstuff samples were digested by microwave digestion. The lead, cadmium and mercury ions can be precolumn derivatized with 5,10,15,20-tetrakis(3-aminophenyl)porphine (T3APP) to form color chelates; then, the Hg-T3APP, Cd-T3APP and Pb-T3APP chelates can be enriched and separated on a valve switching HPLC system combined with on-line enrichment technique. The linearity ranges are 0.01-120 microg/l for each metal ion. The detection limits (S/N = 3) of lead, cadmium and mercury are 1.2 ng/l, 0.5 ng/l and 0.8 ng/l, respectively. This method was applied to the determination of lead, cadmium and mercury in foodstuffs with good results.     

The use of near-infrared spectroscopy for the cure monitoring of an ethyl cyanoacrylate adhesive

Near-IR reflectance spectroscopy has been used to study the curing of ethyl cyanoacrylate adhesive on polished dental glass and microscope slide substrates. The effects of changing the glue film thickness and the type of substrate on the curing rate have been investigated whilst maintaining a constant humidity. The FTIR spectral data has been used to calculate and plot the extents of cure versus time for various film thicknesses.     

Nondestructive determination of compound amoxicillin powder by NIR spectroscopy with the aid of chemometrics

Near-infrared (NIR) spectroscopy, in combination with chemometrics, enables nondestructive analysis of solid samples without time-consuming sample preparation methods. A new method for the nondestructive determination of compound amoxicillin powder drug via NIR spectroscopy combined with an improved neural network model based on principal component analysis (PCA) and radial basis function (RBF) neural networks is investigated. The PCA technique is applied to extraction relevant features from lots of spectra data in order to reduce the input variables of the RBF neural networks. Various optimum principal component analysis-radial basis function (PCA-RBF) network models based on conventional spectra and preprocessing spectra (standard normal variate (SNV) and multiplicative scatter correction (MSC)) have been established and compared. Principal component regression (PCR) and partial least squares (PLS) multivariate calibrations are also used, which are compared with PCA-RBF neural networks. Experiment results show that the proposed PCA-RBF method is more efficient than PCR and PLS multivariate calibrations. And the PCA-RBF approach with SNV preprocessing spectra is found to provide the best performance.     

The vinyl + NO reaction: determining the products with time-resolved Fourier transform spectroscopy

We have studied the vinyl + NO reaction using time-resolved Fourier transform emission spectroscopy, complemented by electronic structure and microcanonical RRKM rate coefficient calculations. To unambiguously determine the reaction products, three precursors are used to produce the vinyl radical by laser photolysis: vinyl bromide, methyl vinyl ketone, and vinyl iodide. The emission spectra and theoretical calculations indicate that HCN + CH2O is the only significant product channel for the C2H3 + NO reaction near room temperature, in contradiction to several reports in the literature. Although CO emission is observed when vinyl bromide is used as the precursor, it arises from the reaction of NO with photofragments other than vinyl. This conclusion is supported by the absence of CO emission when vinyl iodide or methyl vinyl ketone is used. Prompt emission from vibrationally excited NO is evidence of the competition between back dissociation and isomerization of the initially formed nitrosoethylene adduct, consistent with previous work on the pressure dependence of this reaction. Our calculations indicate that production of products is dominated by the low energy portion of the energy distribution. The calculation also predicts an upper bound of 0.19% for the branching ratio of the H2CNH + CO channel, which is consistent with our experimental results.     

Evaluation of an on-line coupled continuous flow liquid membrane extraction and precolumn system as trace enrichment technique by liquid chromatographic determination of bisphenol A

An on-line coupled continuous flow liquid membrane extraction (CFLME) and C₁₈ precolumn system was developed for sample preconcentration in liquid chromatography determination. After preconcentration by CFLME, which is based on the combination of continuous flow liquid–liquid extraction and supported liquid membrane, bisphenol A (BPA) was enriched in 960 μl of 1 mol l⁻¹ NaOH used as acceptor. This acceptor was on-line neutralized and transported onto the C₁₈ precolumn where analytes were absorbed and focused. Then the focused analytes were injected onto a C₁₈ analytical column for separation and detected at 220 nm with a diode array detector. CFLME related parameters such as flow rates, pH of donor and acceptor, and enrichment time were optimized. The proposed method presents a detection limit of 0.03 μg l⁻¹ (S/N=3) when 60 ml samples was enriched with an enrichment time of 30 min. Compared with C₁₈ based column-switching procedure, this proposed procedure presents similar sample throughput and lower detection limits. The proposed method was successfully applied to determine BPA in tap water, river water, and municipal sewage effluent samples.     

Rydberg fingerprint spectroscopy: a new spectroscopic tool with local and global structural sensitivity

Rydberg spectra are shown to provide a spectral fingerprint that is sensitive to molecular structure in unique ways. The concepts are demonstrated using a set of isomeric fluorophenols and a sequence of aliphatic diamines. In the fluorophenols, the sensitivity extends to the placement of a single hydrogen atom and can be traced to the molecular charge distributions associated with the locations of atoms and functional groups with respect to the charge center. Experiments on tetramethyl diamines demonstrate that the structural sensitivity encompasses the extended molecular structure, including parts of the molecule that are remote from the ionization center. This global structure sensitivity makes Rydberg fingerprint spectroscopy uniquely suited to characterize structures of large-scale molecular systems.     

Detection of trace materials with Fourier transform infrared spectroscopy using a multi-channel detector

FTIR spectroscopy is one of the most powerful methods for material characterization. However, the sensitivity of this analytical tool is often very limited especially for materials with weak infrared absorption or when spectral bands of the targeted trace material overlap with the spectral bands of major components. Fortunately, for heterogeneous samples, there is an opportunity to improve the sensitivity of detection by using an imaging approach. This paper explores the opportunity of enhancing the sensitivity of FTIR spectroscopy to detect trace amounts of materials using the FTIR imaging approach based on a focal plane array (FPA) detector. Model sample tablets of ibuprofen in hydroxypropyl methylcellulose (HPMC) have been used to exemplify the detection limits of FTIR spectroscopy using: (a) a conventional mercury cadmium telluride (MCT) detector and (b) a FPA detector. The sensitivity level was compared and it has been found that for this particular set of samples, the lowest concentration of ibuprofen in HPMC that can be detected using attenuated total reflection (ATR) measuring mode with the single element MCT detector was 0.35 wt% while using the FPA detector, the presence of drug has been detected in a sample that contains as little as 0.075 wt% of drug. The application of using this enhanced sensitivity offered by the multi-channel detector to probe trace amounts of drug particles left on the surface of a finger after handling a small amount of the drug has also been demonstrated. These results have broad implications for forensic, biomedical and pharmaceutical research.     

Combining visible and near-infrared spectroscopy with chemometrics to trace muscles from an autochthonous breed of pig produced in Uruguay: a feasibility study

Visible (Vis) and near-infrared reflectance (NIR) spectroscopy combined with chemometrics was explored as a tool to trace muscles from autochthonous and crossbreed pigs from Uruguay. Muscles were sourced from two breeds, namely, the Pampa-Rocha (PR) and the Pampa-Rocha x Duroc (PRxD) crossbreed. Minced muscles were scanned in the Vis and NIR regions (400–2,500 nm) in a monochromator instrument in reflectance. Principal component analysis (PCA), discriminant partial least square regression (DPLS), linear discriminant analysis (LDA) based on PCA scores and soft independent modelling of class analogy (SIMCA) were used to identify the origin of the muscles based on Vis and NIR data. Full cross validation was used as validation method when classification models were developed. DPLS correctly classified 87% of PR and 78% of PRxD muscle samples. LDA calibration models correctly classified 87 and 67% of muscles as PR and PRxD, respectively. SIMCA correctly classified 100% of PR muscles. The results demonstrated the usefulness of Vis and NIR spectra combined with chemometrics as rapid method for authentication and identification of muscles according to the breed of pig.     

A critical comparison between flameless atomic absorption spectroscopy and an improved electrochemical anodic stripping technique in the case of a rapid trace determination of lead in geological samples

Summary Classical anodic stripping analysis is greatly improved with respect to sensitivity and selectivity if an ac polarographic technique is applied. By using the phase sensitive second harmonic detection mode, the peak-to-peak measurement is more accurate and less disturbed by interfering elements than the evaluation of one broader peak with respect to a curved base line typical for the classical dc stripping analysis. Mineral and rock sample solutions can thus be analyzed without any separation or enrichment procedures in the range of 0.1–1000 ppm of lead in the sample with a standard deviation of <5 %. This holds also for flameless atomic absorption in the range >1 ppm. In both cases the standard addition calibration has to be applied. Because of the uncertainty of the automatic background correction in the case of a band spectra in the wavelength range of interest produced by interfering substances, the electrochemical method is more superior the lower the lead concentration is.

---

Kritischer Vergleich der flammenlosen Atomabsorptionsspektroskopie mit einer verbesserten inversvoltammetrischen Methode für die schnelle Spurenbestimmung von Blei in geologischen Proben

Zusammenfassung Die Empfindlichkeit und Selektivität der Inversvoltammetrie läßt sich entscheidend verbessern, wenn ein Wechselstromverfahren angewandt wird. Bei der Registrierung der phasenselektiven »zweiten Harmonischen« ist die Auswertung wegen einer Spitzen-zu-Spitzen-Messung zweier scharfer Peaks genauer und weniger gestört als bei der klassischen Gleichstromtechnik, wo ein breiter Peak relativ zu einer gekrümmten Basislinie auszuwerten ist. Mineral- und Gesteinsprobenlösungen lassen sich daher ohne weitere Trennoder Anreicherungsschritte im Bereich 0,1–1000 ppm Blei in der Probe mit einer Standardabwichung von <5 % analysieren. Dies gilt für Bleigehalte über 1 ppm auch für die flammenlose Atomabsorption. In beiden Fällen ist allerdings die Standardadditions-auswertung anzuwenden. Wegen der Unsicherheit der automatischen Untergrundkompensation im Fall eines Bandenspektrums im interessierenden Wellenlängenbereich, hervorgerufen durch störende Substanzen, wird die elektrochemische Methode mit abnehmenden Bleigehalten zunehmend überlegener.

     

Application of tandem mass spectrometry combined with gas chromatography to the routine analysis of ethyl carbamate in stone-fruit spirits

Gas chromatography (GC) coupled to mass spectrometry (MS) operated in selected ion monitoring (SIM) mode is currently the method of choice for the determination of the toxic contaminant ethyl carbamate in alcoholic beverages. However, even after extensive sample cleanup over diatomaceous earth columns, the identity of ethyl carbamate often cannot be ascertained with confidence, due to inconsistent ratios of the SIM ions m/z 62, 74 and 44 because the qualifier ions are highly susceptible to interferences. Therefore, a new method combining GC and tandem MS using a triple-quadrupole instrument is introduced to determine ethyl carbamate in stone-fruit spirits. For quantitative analysis the characteristic transitions of m/z 74 --> 44 and m/z 62 --> 44 for ethyl carbamate as well as m/z 64 --> 44 for the deuterated internal standard ethyl carbamate-d5 were monitored in the multiple reaction monitoring (MRM) mode. In the validation studies, ethyl carbamate exhibited good linearity with a regression coefficient of 1.000. The limits of detection and quantitation were 0.01 and 0.04 mg/L. The recovery of the method was 100.4 +/- 9.4%. The precision never exceeded 7.8% (intraday) and 10.1% (interday) and the trueness never exceeded 11.3% (intraday) and 12.2% (interday) at any of the concentrations examined, indicating good assay accuracy. A good agreement of analytical results between a previously developed GC/MS SIM method and the GC/MS/MS MRM procedure was found (R=0.987). Regarding the validation data, the procedure is sensitive, selective and reproducible. The applicability of the developed method was demonstrated by the investigation of 70 stone-fruit spirits from commercial trade. The ethyl carbamate concentration of the samples ranged between 0.07 and 7.70 mg/L (mean 1.21 mg/L). The main advantage of the developed GC/MS/MS method is the reliability of the results without the need for time-consuming confirmatory analyses.     

乙基橙-溴酸钾体系动力学光度法测定痕量甲醛

研究了在稀H2SO4介质中,痕量甲醛催化KBrO3氧化乙基橙褪色反应的适宜条件和影响因素,建立了测定痕量甲醛的动力学光度法。方法采用固定时间法于507 nm波长处测量体系的吸光度,在适宜条件下,ΔA与甲醛质量浓度具有良好的线性关系,方法的线性范围为0~0.24 mg/L,检出限为0.004 mg/L。该方法用于饮料、废水和废气中痕量甲醛的测定,测定结果的相对标准偏差RSD≤3%(n=6),回收率为102%。